Master Data coming from 1 backend and GOA distributed to many bakends

Hello,
In our case (using SRM 5.0) one backend system is used to replicate all material master data and GOA will be distributed to multiple backends including the one that is used for master data. As far as i know the logical backend system is determined through materials/material groups while GOA is distributed. In the above case how can we intervene with this logic to be able to distribute the GOA to whatever backend we have, even though if the MD is not coming from them?
Thank you,

Hi,
You can use the BADI BBP_DETERMINE_LOGSYS for this purpose.
The method :CONTRACT_LOGSYS_DETERMINE (Determine Target System of Contract) has been provided for the same purpose.
Sample BADI Implementation at SDN Wiki:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/bbp_determine_logsys-contract_logsys_determine&
Regards
Kathirvel
Edited by: Kathirvel Balakrishnan on Feb 25, 2008 1:00 PM

Similar Messages

  • Master data coming from which particular table of source system

    Hi,
    my requirement is i have a master data (ABC) coming from a source sytem XYZ
    there is an attribute (L) in my master data. Now i want to know from which table in my source sytem the data pretaining to attribute L is coming up.
    I m using BW 3-5 system
    Is there a way through which i can directly find out abt the same.
    thanks

    Hi,
    Is this standard Master data or Generic one, if it is customised one then you can find the same in customer exit of ECC system,
    go to tcode CMOD in ECC system, there willbe an project defined for the BW system, in that get an exact component, and check for the custom code for your masterdat, there you will be in a position to find out from where the data is being extracted.
    if you are good at abap you can debug it via RSA3 , else get an help of an abaper to find it out.
    if it is standard , then you can search in SDN, but for for better reuslts, you can go to RSO2 and give the datasource name of that master data and clik on display you, will get an display in the bottom saying that this data source using FM 'XXXXXXX', copy that FM name and try to give it in SE37 and debug it via RSA3 for better results.
    Regards,
    Nanda.S

  • Mass Master data Upload from MS Excel and JDE into SAP ( ECC 6.0)

    Hi
    We are deciding the best method of uploading 2 million fixed assets Master data from Excel and JDE
    We are following Batch Input (RAALTD001) and Direct Input methods (RAALTD11)
    I am looking for some other efficient alternative for this upload
    Look forward ot hear form you experts !!
    Thanks
    Milind

    hi
    good
    both works not possible simultaneously.
    If you want to do it in two separate task than you can use the GUI_UPLOAD function module to fulfill your requirement.
    thanks
    mrutyun^

  • Data coming from Three Applications and needs to post into SAP

    Hi all,
    i have scenario like
    XI needs to take data from 3 Applications and do some validations like data comparision of comman records and post the comman data among the three to SAP.
    Application1 will send text file and Application2 will send CSV file and Application3 will send xml file
    Ex:
    Application1:
    Emp No
    Emp Name
    Sal
    Location
    Application2:
    Emp No
    Emp Name
    Desgination
    Application3:
    Emp No
    Emp name
    Designation
    Location
    Now the Target data should be
    Emp No
    Emp Name
    Designation
    This is only the comman record which is there from 3 Applications.
    Regards

    Hi vamsi,
      As the experts mentioned above BPM is the way to achieve your business requirement.When you use BPM there is a step to wait till the 3 messages to come into XI to process furthur.Refer to the following links choose the one that is useful to you.
    Check this link for more information...
    http://help.sap.com/saphelp_nw04/helpdata/en/0e/56373f7853494fe10000000a114084/content.htm
    take a look at this blog..
    /people/alexander.bundschuh/blog/2006/01/04/scheduling-messages-in-sap-xi
    For your case yes its not mandatory to create communication channels for each step if the inputfiles are same and from same system..Else you obviously need to create different communication channels for each different file more over you mentioned that files are coming from 3 different application and should be merged.So 3 communication channels are required.
    Refer the following link too to get better understanding on message merge
    Re: BPM - Message merge
    All the best,
    Ram.
    Edited by: Ramakrishna kopparaju on Apr 24, 2009 7:55 PM

  • How can i use an ao card (pci 6723) to output data and to trigger an ai o acquire the data coming from the ao card?card (pci 6254) t

    Hello
    I am trying to perform AO (pci 6723) and to trigger my AO card (pci
    6254) to read the data coming from the AO card. I am using LV7,1,
    win2000.
    Is an RTSI cable necessary or I can connect the trigger signals externally ?
    I am using the LV example " multi function - synch ai-ao.vi" but i can't for some reason configure the trigger lines.
    thank you in advance for your time.
    Yiannis

    Hello Yiannis,
    If I understand you correctly, you want to synchronize your analog input and analog output that are started by a trigger on the analog input board. If you don't want to use the RTSI lines, your best bet is to export the AI Sample Clock and then read it in to the AO board. There is an example on ni.com called DAQmx - Synchronized AIAO Shared Clock. It appears to be having techincal issues so I have attached the example below. To export ai/sampleclock, use DAQmx Export Signal.vi after Get Terminal Name with Device Prefix.vi. Export Sample Clock to PFI3 (There are only connections between the sample clock and PCI3/4/8/9). Connect PFI3 on your AI board to PFI0 on your AO board (with a wire). Then change the source for the AO Timing.vi to Devx/PFI0. If you want to do triggering, stick the DAQmx Trigger.vi between the Timing property node and the DAQmx Start.vi on the AI task. I have shown how to do this in the modified version below. Please take a look at it and let me know if you have any questions. If you still get an error please take a screenshot of it and post to the forum. Have a great day!
    Sincerely,
    Marni S.
    Attachments:
    Synchronized_AIAO_Shared_Clock[Modified].vi ‏140 KB

  • Fill a table with data coming from an RFC

    Hello everyone:
    I've followed the Weblog "How many lines of java code did i write for a simple Web Dynpro?"
    /people/durairaj.athavanraja/blog/2004/10/17/how-many-lines-of-java-code-did-i-write-for-a-simple-web-dynpro
    I've called an RFC and created a table with data coming from it (which is also a table). My question is, if in this table there's a field named "UserType" there are two possible values for this field:
    "userA"
    "userB"
    How can I get the table only show me the "userA" registers? The RFC does return all of the users, but when filling the table, can I put an if-else somewhere on my code?
    Thanks a lot
    Alejandro

    Hi Alejandro,
    Referring to the link provided "The logic of the filter process is not implemented in Web Dynpro. The application developer must implement the action to be executed."
    We would have to implement the action onFilter in the controller implementation. Ideally, we fill the data retrieved from backend into a List (java.util.List) (this could be done on init of view) and then subset the list after meeting the criteria in the action handler(say
    onActionFilterData(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent).
    Having done this, you may bind the output list back to the node (shown in table)
    Regards,
    Chaitanya

  • Is it possible to update master data attributes from an ODS?

    HELLO ALL,
    we have records coming into our ods like the following:
    costcenter1, subcostcentera, subcostcenterb, manager responsible, costs (kf). 
    This is a custom flat file load from a legacy system.
    We would like to just create an update rule from the ODS to the cost center mater data characteristic attributes. 
    Is this possible?
    thank  you

    Yes its possible to update the master data attributes from an ODS.
    Define your master data characteristics as a infoprovider.
    Create a update rule on Characteristic with ODS as a source and do general mapping.
    For step by step, pls refer..
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/library/business-intelligence/g-i/how%20to%20implement%20flexible%20master%20data%20staging

  • How to store the data coming from network analyser into a text or excel file

    Hii everyone
    I'm using Agilent 8719ET network analyser and wish to store the data coming from netowrk analyser into a text file/ excel file.
    Presently I'm able to get the data on Labview graph using GPIB . Can anyone suggest how to go ahead after collect data sub vi. How can the data be stored into a file apart from showing on the graph?
    Attached is the vi for kind consideration...
    Looking for help
    Regards
    Rohit
    Attachments:
    Agilent 87XX Series Exceed Max Meas.vi ‏43 KB

    First let me say that your code really looks pretty good. The data handling could be made more efficient by calculating the number of datapoints that are going to be in the completed dataset and preallocating the entire array -- but depending upon your answer to my questions, the logic in the lower shift register may be going away - so we won't worry about that right now.
    The thing I need to know before addressing the data storage question is: Each time you call "Collect and Display Data.vi", how many element are in the array? Are you reading single data points, or a group of data? (BTW: if the answer to that question is obvious based on the way the other VIs are setup, I don't have the drivers so I can't tell what the setup values are.) Second, how fast does the loop iterate? Are we talking msec per loop?, seconds? fortnights?
    The issues here are two-fold: how much data? and how fast is it coming? The answer to these will tell you how to save the data.
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Master data extraction from SAP ECC

         Hi All,
    I am a newbie here and teaching myself SAP BI. I have looked through the forums regarding master data extraction from SAP ECC in all forums but could not answers for my question. Please help me out.
    I want to extract customer attributes from SAP ECC. i have identified the standard data source 0customer_attr and replicated in SAP BI. I have created infopackage for full update. I validated the extractor checker(RSA3) and found 2 records for 0customer_attr.
    When I run the info package, the info package remains in yellow state until it times out. Please let me know in case i am missing anything, Please let me know if there is any other process for master data extraction similar to transaction data extraction.

    Hi All,
    i did the below and afte clicking execute in the Simple job, it takes me back to the Monitor Infopackage screen.
    From your info pack monitor --> menu environment-->job overview--> job in the source system--> prompts for source system(ECC) user id and password, enter them, you will get your job at SM37(ECC), select job and click on log details icon. there you can see details about your error. please share that error screen shot.
    Please find the screenshots.
    I did an Environment -->Check connection and found the below,

  • Master data Load from Oracle table

    Hi,
    My master data comes from an Oracle table. The table has both attributes and texts combined. How do I load the Master data into the text and attribute info objects thru Direct Upload of Master Data?
    Is it necessary to go in for Flexible Upload in this case?
    Regards

    Hi,
    you can create two views on the table. One for the text and the other one for the attributes. Create your datasources on these views and assign them to your infoobject.
    regards
    Siggi

  • In the NI Library VI: Extract Numbers, the string control is automatically loaded each time the VI is opened with "Counting to five: one 2 three 4.0 five. Where is this string data coming from?

    Even after deleting the string "Counting to five: one 2 three 4. five." from the string control and replacing it with another string the original string returns after the VI is saved then reopened. Where is this string data coming from? I've attached a copy of the library function. I've been able in my application to get around the problem by replacing the string control with a string constant. But I'm still curious as to what's going on.
    Thanks,
    Chuck
    Solved!
    Go to Solution.
    Attachments:
    Extract Numbers Test.vi ‏9 KB

    Chuck,
    String control has been set to default with the string you are seeing.  To change this, enter the new string, right click the control and select
    Data Operations>>Make Current Value Default
    Now save your vi.

  • How to  extract  master data  attribute from  r/3 to bw give steps details

    how to  extract  master data  attribute from  r/3 to bw give steps details screenshots

    Hi
    Go through the below process to extract Master Data Attribute from R/3
    Hi,
    Maintaining Generic DataSources
    Use
    Regardless of the application, you can create and maintain generic DataSources for transaction data, master data attributes or texts from any transparent table, database view or SAP Query InfoSet, or using a function module. This allows you to extract data generically.
    Procedure
    Creating Generic DataSources
    1. Select the DataSource type and specify a technical name.
    2. Choose Create.
    The screen for creating a generic DataSource appears.
    3. Choose the application component to which you want to assign the DataSource.
    4. Enter the descriptive texts. You can choose any text.
    5. Select the datasets from which you want to fill the generic DataSource.
    a. Choose Extraction from View if you want to extract data from a transparent table or a database view. Enter the name of the table or the database view.
    After you generate the DataSource, you have a DataSource with an extraction structure that corresponds to the database view or transparent table.
    For more information about creating and maintaining database views and tables, see the ABAP Dictionary Documentation.
    b. Choose Extraction from Query if you want to use a SAP Query InfoSet as the data source. Select the required InfoSet from the InfoSet catalog.
    Notes on Extraction Using SAP Query
    After you generate the DataSource, you have a DataSource with an extraction structure that corresponds to the InfoSet.
    For more information about maintaining the InfoSet, see the System Administration documentation.
    c. Choose Extraction Using FM if you want to extract data using a function module. Enter the function module and extraction structure.
    The data must be transferred by the function module in an interface table E_T_DATA.
    Interface Description and Extraction Process
    For information about the function library, see the ABAP Workbench: Tools documentation.
    d. With texts you also have the option of extracting from fixed values for domains.
    6. Maintain the settings for delta transfer, as required.
    7. Choose Save.
    When performing extraction, note SAP Query: Assigning to a User Group.
    Note when extracting from a transparent table or view:
    If the extraction structure contains a key figure field that references a unit of measure or a currency unit field, this unit field has to be included in the same extraction structure as the key figure field.
    A screen appears on which you can edit the fields of the extraction structure.
    8. Edit the DataSource:
    ○ Selection
    When you schedule a data request in the BI scheduler, you can enter the selection criteria for the data transfer. For example, you can determine that data requests are only to apply to data from the previous month.
    If you set the Selection indicator for a field within the extraction structure, the data for this field is transferred in correspondence with the selection criteria in the scheduler.
    ○ Hide field
    You set this indicator to exclude an extraction structure field from the data transfer. The field is no longer available in BI when you set the transfer rules or generate the transfer structure.
    ○ Inversion
    Reverse postings are possible for customer-defined key figures. Therefore inversion is only active for certain transaction data DataSources. These include DataSources that have a field that is marked as an inversion field, for example, the update mode field in DataSource 0FI_AP_3. If this field has a value, the data records are interpreted as reverse records in BI.
    If you want to carry out a reverse posting for a customer-defined field (key figure), set the Inversion indicator. The value of the key figure is transferred to BI in inverted form (multiplied by –1).
    ○ Field only known in exit
    You can enhance data by extending the extraction structure for a DataSource by adding fields in append structures.
    The Field Only Known in Exit indicator is set for the fields of an append structure; by default these fields are not passed to the extractor from the field list and selection table.
    Deselect the Field Only Known in Exit indicator to enable the Service API to pass on the append structure field to the extractor together with the fields of the delivered extract structures in the field list and in the selection table.
    9. Choose DataSource ® Generate.
    The DataSource is saved in the source system.
    Maintaining Generic DataSources
    ● Change DataSource
    To change a generic DataSource, in the initial screen of DataSource maintenance, enter the name of the DataSource and choose Change.
    You can change the assignment of a DataSource to an application component or change the texts of a DataSource. Double-click on the name of the table, view, InfoSet or extraction structure to get to the appropriate maintenance screen. Here you make the changes to add new fields. You can also completely swap transparent tables and database views, though this is not possible with InfoSets. Return to DataSource maintenance and choose Create. The screen for editing a DataSource appears. To save the DataSource in the SAP source system, choose DataSource ® Generate.
    If you want to test extraction in the source system independently of a BI system, choose DataSource ® Test Extraction.
    ● Delta DataSource
    On the Change Generic DataSource screen, you can delete any DataSources that are no longer relevant. If you are extracting data from an InfoSet, delete the corresponding query. If you want to delete a DataSource, make sure it is not connected to a BI system.
    NR

  • Data deleted in ODS, data coming from the data source : 2LIS_11_VASCL

    Friends,
    I have situation :
    Data deleted in ODS, data coming from the data source : 2LIS_11_VASCL.
    when for the above ods and the data source when trying to delete the request whole data got delted.
    All the data got deleted in the fore ground. no background job has been generated for this.
    I ma really worried abt this issues. can u please tell me what should be the possibilities for this issue.
    Many Thanks
    VSM

    Hi,
    I suppose you want to know the possibilitiy of getting the data.
    If the entire data is being deleted, you can reload the data from source system.
    Load the setup table for your application. Then carry out init request.
    Please note that you would have to take a transaction-free period for carrying out this activity so that no data is missed.
    Once this is done, delta queues will again start filling up.

  • How to reflect the Master data changes from ECC to MDM

    Hi Experts,
    We need to reflect the master data changes of company code and cost center groups  from ECC to MDM.
    what methods available and which would be best in performance.
    kindly let me know if you need further information for better undrstanding.
    Thanks in anticipation
    looking forward to hear from you all,
    with regards,
    Chandhan.S

    Hi,
    You need to use change pointer to do this. Go to transaction SALE,
    expand MODELLING AND IMPLEMENTING...
    expand MASTER DATA DIST...
    expand REPLICATION OF MODIFIED DATA
    You may need to maintain distribution model in SALE.
    Cheers.
    Reward if useful

  • How to delete Master Data transferred from ECC to APO via CIF

    Hi, all
    I'm connecting SCM 5.1 with ECC 6.0 via CIF.
    When activating Integration Model in ECC, the following error occurred;
       "Location 0001 of type 1001 (BSG 592BUSGP) already exists in APO"
    This is because Location 0001 was already transferred from different ECC client via CIF, and not cleared.
    I'm now trying to initialise master data transferred from ECC to APO via CIF, but in vain.
    I suppose I have to first delete all master data CIFed from ECC in APO, or have to execute initialisation of APO master data with ECC data in ECC.
    Please tell me how to do this.
    For details, please read the followings;
    I connected APO client with ECC client 590.
    I transferred Plant and Material Master from ECC to APO via CIF.
    After that, I wanted to change ECC client from 590 to the other.
    I created the other client (592) by client-copying from 590 with SAP_ALL copy profile.
    I deactivated Integration Model in ECC 590, and activated the same in ECC 592.
    Here, I faced the problem.
    The initial data transfer failed due to the duplicate of data.
    Now I'm wondering how I can initialise master data in APO and transfer initial data from ECC.
    Due to testing purposes, I have to change ECC clients from one to the other this time, but I cannot initialise master data in APO and cannot tansfer initial data from different ECC client.
    thanks in advance,
    Hozy

    Hi all,
    Thank you very much indeed for lots of your replies.
    Thanks to all of your advices, I'm getting to understand what to do.
    Well, I'll say I have to create one more client for testing with other ECC clients or I have to rebuild the client by client-copying from 001 and implementing all transportation requests, for marking del flags to each master data and running del programme sound like tough work, and sound like odd ..
    Then, I've got next issue here.
    In SCM-APO, I use BI objects, and , if I have to create several clients for testing, I have to set up clients where you can use both BI objects and CIFed master data.
    I suppose I have to change 'BWMANDT' in RSADMINA and make RSA1 accessable in other SCM clients and implement tests.
    Also, I have to register BI System for newly created SCM clients in RSA1-SourceSystem.
    Well, if you have any experiences on this kind of use, and if you have any advice on it, please give me any tips.
    Particulary, I'd appreciate very much if you give me advice on which way you have chosen; creating several clients or rebuilding the one client in SCM-APO when you use both BI objects, CIFed master data and Demand Planning.
    Thanks in advance.
    Hozy

Maybe you are looking for