Mass Master data Upload from MS Excel and JDE into SAP ( ECC 6.0)

Hi
We are deciding the best method of uploading 2 million fixed assets Master data from Excel and JDE
We are following Batch Input (RAALTD001) and Direct Input methods (RAALTD11)
I am looking for some other efficient alternative for this upload
Look forward ot hear form you experts !!
Thanks
Milind

hi
good
both works not possible simultaneously.
If you want to do it in two separate task than you can use the GUI_UPLOAD function module to fulfill your requirement.
thanks
mrutyun^

Similar Messages

No master data upload from ECC to GTS

Hello together
today I have opened an OSS Note regarding a problem at our client side.
We implement SAP GTS 7.2 SP08 but I`m not able to upload any master data (customer and/or material) from ECC to GTS. This is my third implementation project. On both projects in the past, I didn`t had such a trouble with this topic in the past.
I searched the whole forum and tried every hint - everything without any success. ;-(
Unfortunately, the OSS Note is in German. But I hope that anyone could help me to find an solution. Thanks to all very much.
Here is the OSS Note:
Keine Initialüberleitung von Kunden- und Materialstämmen OSS-NOTE: 0000637481
Alle notwendigen Supportpackage-Stände für R/3, PlugIn und GTS sind eingespielt gemäss MasterGuide.
R/3 client:-
- RFC Destinationen korrekt eingestellt. Laufen sauber
- Methodenaufrufe korrekt eingestellt
- ALE Verteilmodell korrekt eingestellt
- Änderungszeiger global aktiviert
- Änderungszeiger korrekt eingestellt (siehe unten)
Customer master /SAPSLL/DEBMAS_SLL
Vendor master /SAPSLL/CREMAS_SLL
Material master /SAPSLL/MATMAS_SLL
- Ànderungszeiger den jeweiligen Funktionsbausteinen zugeordnet (siehe unten)
/SAPSLL/DEBMAS_DISTRIBUTE_R3
/SAPSLL/CREMAS_DISTRIBUTE_R3
/SAPSLL/MATMAS_DISTRIBUTE_R3
- Nummernkreise für Änderungszeiger angelegt
GTS client:-
- Logische Systeme angelegt und Gruppen zugeordnet
- RFC Destinationen korrekt eingestellt. Laufen sauber
- Methodenaufrufe korrekt eingestellt
- Partnermapping eingestellt
- Organisationsstrukturen angelegt und Buchungskreis bzw. Werken aus
Vorsystem zugeordnet
- Nummernkreise angelegt
Beispiel:
1. Kundenstamm im Vorsystem hat keine PLZ in den Stammdaten. Bei Übertragung nach GTS wird im GTS-System ein Überleitungsprotokoll erzeugt, mit dem Hinweis, dass Kunde nicht übertragen werden konnte aufgrund fehlender PLZ. Korrektes Systemverhalten.
2. Kundenstamm wurde entsprechend im Vorsystem gepflegt. Bei erneuter Übertragung wird angezeigt 0 von 1 Partner übertragen. Ein Überleitungsprotokoll in GTS wird nun nicht mehr erzeugt.
Auch unter Transaktion SLG1 wird im Vorsystem kein Anwendungs-Log
geschrieben. Ebenfalls gibt Transaktion SM58 keine Fehlerhinweise.
Edited by: Andreas Drees on Jun 29, 2009 3:35 PM

Hi Sameer,
thanks very much for your instructions. We created the variants and debugged it. Now fe found out, where the error occurs.
The call function for calling GTS "/SAPSLL/API_1006__SYNCH_MASS" gives us following message:
"Not just yet all adress numbers are collected."
Then on the other hand the SAP Basis suppors gaves us a possible solution. They told us:
The problem occurs, because the tables TBD24 and TBD62 are not filled correct.
Please use the following steps to correct this:
- Transaction BD53
- Select Message type (/SAPSLL/CREMAS_SLL, etc.), change mode
- Choose segment (mark an unmarked segemnt)
- save
- Delete the activated segment
- Activate change pointer
- in TA BD60 set up the function module correct (/SAPSLL/DEBMAS_DISTRIBUTE_R3)
The tables should filled correct after these steps. You can check it with report /SAPSLL/PLUGIN_CHECK_R3.
So I we went through these steps - but without any success. I`m getting crazy. ;-(
Regards,
Andreas

Master data upload from legacy

Dear All,
We are supposed to upload the master data from legacy system to SAP using LSMW and BDCs.
Is it possible to develop an interface between legacy system and SAP ERP for a direct data transfer? Can this be accomplished using XI?
Is the scenario asked by my team as above recommended by SAP?
regards, Sean.

Yes I think u can use XI to create an interface to transfer data from legacy system to R/3 also u can use other middle ware like webmethods to do the same. U can use ALE/EDI technology to transfer data as idoc .

Master Data coming from 1 backend and GOA distributed to many bakends

Hello,
In our case (using SRM 5.0) one backend system is used to replicate all material master data and GOA will be distributed to multiple backends including the one that is used for master data. As far as i know the logical backend system is determined through materials/material groups while GOA is distributed. In the above case how can we intervene with this logic to be able to distribute the GOA to whatever backend we have, even though if the MD is not coming from them?
Thank you,

Hi,
You can use the BADI BBP_DETERMINE_LOGSYS for this purpose.
The method :CONTRACT_LOGSYS_DETERMINE (Determine Target System of Contract) has been provided for the same purpose.
Sample BADI Implementation at SDN Wiki:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/bbp_determine_logsys-contract_logsys_determine&
Regards
Kathirvel
Edited by: Kathirvel Balakrishnan on Feb 25, 2008 1:00 PM

Steps for Master data upload from ECC6.0 to BI7.0

Hi experts,
I need to load material master and customer master data from ECC6.0 to BI7.0 and i could not see the steps to do so in sdn.
Can anyone please give me the steps from the beging till end usign Business content 0material_attr/text/Hier .
I Will assign deserving points to all the answers.
Thanks in advance.

Hi,
Steps:
1. Go to RSA5 in ECC6 to Install Business Content D.S.
2.If you want do any change then Go to RSA6 in ECC6
3. Replicate DS in BW .
4. Create Transformation (to connect DS to MD).
5 Create Info package ( to load from S/S to PSA ).
6. Create DTP ( to load from PSA to MD Objects ).
Please let me know if i am missing any steps.
Ali.

Data transfer from oracle database(external database) to sap database

Hi Abapers,
I have a requirment like excel data upload from oracle database(external database) to SAP database .Plz any one can help me how to create a bdc program for this requarment.
Advance thanks you.
Jnana

HI
use function module 'ASLM_EXCEL_TO_INTERNAL_TABLE' TO UPLOAD DATA FROM EXCEL SHEET TO INTERNAL TABLE. FROM THERE U CAN SAVE IT TO DATABASE USING BDC FUNCTION MODULES.

Data upload from excel into SAP

Hi Gurus
Could anyone please guide me how to upload excel data into SAP?
I need to update existing Gross weight and Net weight data. Got new data in excel format.So need to upload excel file straight into SAP and update the data.
Step by step procedure will be much appreciated.
Rgds
Utpal

try with bdc .....
below coding is move the data from excel to internal table ....
TYPES: BEGIN OF s_ovro,
          VKORG LIKE V_TVSFK-VKORG,
          VTWEG LIKE V_TVSFK-VTWEG,
          SPART LIKE V_TVSFK-SPART,
          STGKU LIKE V_TVSFK-STGKU,
          STGAK LIKE V_TVSFK-STGAK,
          STAFO LIKE V_TVSFK-STAFO,
       END OF s_ovro.
DATA: I_OVRO TYPE TABLE OF s_ovro,
      w_ovro type s_ovro.
data : request(15) type c,
        i type c.
DATA : IT_EXCEL TYPE STANDARD TABLE OF ALSMEX_TABLINE WITH HEADER LINE.
FIELD-SYMBOLS: <FS1> TYPE ANY.
include bdcrecx1.
SELECTION-SCREEN BEGIN OF BLOCK DATA WITH FRAME.
PARAMETERS: P_FILE TYPE RLGRAP-FILENAME DEFAULT 'C:\Documents and Settings\itfactory\Desktop\sd1.xls' OBLIGATORY.
SELECTION-SCREEN END OF BLOCK DATA.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SYST-CPROG
      DYNPRO_NUMBER = SYST-DYNNR
      FIELD_NAME    = 'P_FILE'
    IMPORTING
      FILE_NAME     = P_FILE.
start-of-selection.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
    EXPORTING
      FILENAME                = P_FILE
      I_BEGIN_COL             = 1
      I_BEGIN_ROW             = 1
      I_END_COL               = 24
      I_END_ROW               = 60000
    TABLES
      INTERN                  = IT_EXCEL
    EXCEPTIONS
      INCONSISTENT_PARAMETERS = 1
      UPLOAD_OLE              = 2
      OTHERS                  = 3.
LOOP AT IT_EXCEL.
    ASSIGN COMPONENT IT_EXCEL-COL OF STRUCTURE
    W_ovro TO <FS1>.
    <FS1> = IT_EXCEL-VALUE.
    AT END OF ROW.
     MOVE-CORRESPONDING: Wib TO Iib.
      APPEND w_ovro to I_ovro.
      CLEAR W_ovro.
    ENDAT.
ENDLOOP.
through bdc program update the data from internal table to bdc...

Profit center and cost center master data upload errors

Hi Sapiens,
Could you please guide me to resolve the below errors in profit center and cost cost center master data upload through LSMW. i am usinng recording method for upload and getting below error while uploading the data from txt file.
1. Valid from and to dates are not converting in DDMMYYYY format, which field type we have to use in field mapping?
2. some of the fields data are overlapping when uploading the data.
3. How to create validation for empty cells data.
thank in advance.
regards,
jagadeesh.

Hi
when you are using LSMW for uploading PC & CC, simple way to correct the Error's WHILE RECORDING The First record, while Creating LSMW, B very care full while entering the details ,bez wht ever Fields your updating ..the same Fields get updated While LSMW Processed.
As mentioned above update the vaild from and to date in wht ever format you want While recording, in the same format all the remaining records gets updated..
Hope the suggections will Help you in solving your Issues.
Thanks
Goutam
Edited by: Goutam78 on Apr 29, 2011 8:59 PM

Read data from Excel and write into oracle database

Hi
I want to know how can i read data from excel and write into oracle database using java.Kindly help me out to find a solution.
Thanks and Regards
Neeta

Hai,
I am suggesting the solution.
I will try out and let u know soon.
Make a coma separated file from your excel file.
Assuming that your requirement allows to make a csv file.
This file may be passed as an file object to be read by java.Using JDBC you must be able to populate the data base.You can also use String Tokenizer if needed.
You do not want to go via sql Loader?
For reading the excel file itself do you want java?

Get the data from excel and insert into the database

I want to read the data from excel file, get the data from excel and insert into the database.

You can use the Apache POI HSSF API to read data from Excel files and you can use the Sun JDBC API to insert data in database.
This has nothing to do with JSP/JSTL.

Master data upload into SAP system

Hello,
I want to know if there is any standard method to upload material master, customer master, vendor master and finance master data into SAP system.
I am not referring to LSMW's, BDC's and using BAPI's. I am aware of standard programs like RMDATIND for material master upload, RFBIDE00 for customer master upload and RFBIKR00 for vendor master upload. But these are using direct input method and SAP recommends this only for testing purpose. I am not sure if this could be really used in actual live scenarios.
From some other posts in the forum, I came to know about some transactions like BDLR, SXDB and BMVO. Can some one tell me how to use these T.Codes?
If some one has any detailed documentation on these T.codes or in general standard master data upload techniques please send it to [email protected]
Thanks in advance,
CMV

Hi,
Define the following attributes, using the F4 input help and F1 field help:
Report
Name of a registered program for this program type
Variant
You can only specify a variant with programs that are started directly.
With direct input, data from the data transfer file undergoes the same checks as with the online transaction and is then transferred directly into the SAP System. The database is updated directly with the transferred data.
For the documentation of other transactions please refer the correponding program documentation..which is more helpful,
<b>Reward points if helpful,</b>
Regards,
jinesh

FI Master data upload sequence

Experts,
Please excuse me if my post sounds vague. I am a Technical Consultant working off-site independently. I couldn't think of a better forum to get functional advice.
Please look at the below list of FI Master data upload objects, and suggest:
a. the recommended sequence in which the objects are to be uploaded
b. points to consider/tips for uploading/recommendations (LSMW/BUS*/BAPIs, etc)
FI Objects:
1. Cost Centers
2. Profit Centers
3. GL Accounts- COA,CC
4. Fixed Assets
5. Bank Data
6. Cost Elements
7. Activity Groups
8. Activity Types
9. Activity Prices
Thanks in advance.
NW

Hi,
we have to upload first the Master such as G/l Accounts , Primary Cost Elements & Secondary cost elements.then upload the open items , then p/l balances, then B/S balances , finally asset master with balances
Pre-Check LSMW: To-Do-List Before Using the Tool
The LSM Workbench is a tool that supports the transfer of data from non-SAP systems to R/3. Basic functionality of the LSM Workbench:
1. Import old data from spreadsheet tables or sequential files.
2. Convert the data from source format into target format.
3. Import the data into R/3.
Before using the LSM Workbench, you need a concept for data migration. In particular, note the following items:
· Make sure that R/3 customizing is complete.
· Analyze the data existing in the legacy system to determine which data will be needed in the future (also from a business-operational point of view).
· Consider whether usage of the tool makes sense with regard to the data volumes to be transferred. In case of very small data quantities, it may be easier to carry out the transfer manually. With very large data volumes, however, batch input technology may lead to excessively long runtimes. Rough estimate for the required time: 10000 records per hour; this value, however, may vary strongly depending on the hardware.
· Identify the transaction(s) in R/3 you want to use for bringing the data into the SAP System. Here, it may also be relevant whether the data is required for statistical (evaluation) purposes or for further processing in the system.
· Test the relevant transaction in R/3 manually with test data from the old system and make sure that all required fields are filled. There may be required fields that do not correspond to any data window in the legacy system. In such a case, assigning a fixed value or defining the field as optional for data transfer may be appropriate.
· Check the interfaces provided by the application. Is there a batch input program and an IDoc (for example)? Which method should be used in your project?
· Develop a mapping plan in written form: Assign the legacy system fields to the R/3 fields.
· Determine the form (e.g. via u201EMOVEu201C or assigned according to a rule) in which the legacy system data shall be transferred to the SAP System.
· If applicable, define the allocation rules (LSM-internal name: u201Etranslation rulesu201C).
· Define the way for extracting the data from the legacy system. (Note: LSMW does not extract data.)
· Describe the form in which the old data are available: Will the host or the spreadsheet interface of the LSMW have to be used?
· If only a part of your legacy system will be replaced by R/3, define the functionalities to be provided by the SAP System and those to be provided by the legacy system. If required, create a concept of the data flows and interface architecture.
These questions can only be answered individually for every customer; as a matter of course, this should be done before the tool is used!
SKS

Master data Load from Oracle table

Hi,
My master data comes from an Oracle table. The table has both attributes and texts combined. How do I load the Master data into the text and attribute info objects thru Direct Upload of Master Data?
Is it necessary to go in for Flexible Upload in this case?
Regards

Hi,
you can create two views on the table. One for the text and the other one for the attributes. Create your datasources on these views and assign them to your infoobject.
regards
Siggi

New SAP Tools for faster Master Data Upload?

Hi All!
I am interested in getting some detailed information on different tools that are used for faster master data upload. Please let me know about the tools apart from LSMW, BAPI, eCATT and BDC.
We basically want to know the following things:
1.Which are the tools available for this master data upload?
for eg. SAP MDM, Info Shuttle, other available new age tools etc........
2. Their performance / feature comparions?
Please provide performance / feature comparison for different new age tools in detail.
Thanking you in advance.
Regards,

Hi Amar,
regarding SAP MDM you can read advantages and characteristics here: http://www.sap.com/platform/netweaver/components/mdm/index.epx
Hope this help you,
Vito

How to schedule Job for data uploading from source to BI

Hi to all,
How to schedule Job for data uploading from source to BI,
Why we required and how we do it.
As I am fresher in BI, I need to know from bottom.
Regards
Pavneet Rana

Hi.
You can create [process chain |http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502b2998-1017-2d10-1c8a-a57a35d52bc8?quicklink=index&overridelayout=true]for data loading pocess and schedule start process to any time/date etc ...
Regadrs.

Mass Master data Upload from MS Excel and JDE into SAP ( ECC 6.0)

Similar Messages

Maybe you are looking for