Master-Detail Form using Oracle XE...

Hi ,
Which type of page (blank , form , ....) should i select in order to create a master - detail form (dept - emp tables on SCOTT schema) in one and just one page (no tabs)...????
And also . . . is it possible the above form to be used for both inserts , updates and deletes...????
Many thanks ,
Simon

Hi Simon,
Use form then Master Detail Form.
You can insert, delete, and update rows.
http://htmldb.oracle.com/pls/otn/f?p=26372
for example of Master - Details - Details solution (not a form).
Konstantin

Similar Messages

Apply "WHERE CONDITION" in "MASTER/DETAIL FORM" in "ORACLE APEX

Hi to all respected Gurus of this community.
I have a problem and I hope that there must be solution in this community and I am not aware of that till now.
I have a master/detail form in Oracle Application Express. Now, I want to apply a where condition in master-form to filter the data as per requirement but I cannot do so.
There is an option of "Modify Query" in "Query Definition". According to the instructions I am selecting the desired column (HR_Category) in left and providing text string 'M-9' in the right column to filter the data where HR_Category is M-9, and when I press apply changes, it gives me an error that
"1 error has occurred
The condition you are adding has caused the query to be invalid."
Please help how to proceed to apply a where condition.
Regards
Muhammad Uzair Awan
Oracle APEX Programmer
Pakistan

uzairmalik wrote:
Hi to all respected Gurus of this community.
I have a problem and I hope that there must be solution in this community and I am not aware of that till now.
I have a master/detail form in Oracle Application Express. Now, I want to apply a where condition in master-form to filter the data as per requirement but I cannot do so.
There is an option of "Modify Query" in "Query Definition". According to the instructions I am selecting the desired column (HR_Category) in left and providing text string 'M-9' in the right column to filter the data where HR_Category is M-9, and when I press apply changes, it gives me an error that
"1 error has occurred
The condition you are adding has caused the query to be invalid."
Please help how to proceed to apply a where condition.
Regards
Muhammad Uzair Awan
Oracle APEX Programmer
Pakistan
Probably a syntax error. Check the syntax of the new clause very carefully.
Can you post the query indicating which predicate is the new one? If you need to change the column and table names for confidentiality

Master details form in Oracle BPM

Hi All,
Could anybody please let me know if we can create master details form in Oracle BPM too? If yes kindly help me in this regard. Thanks
Regards
Nasir

Hi,
I tested it on JDev12c and also works:
Couple of tips:
- Try to keep your payload as small as possible. Check this post: http://avioconsulting.com/blog/decoupling-oracle-bpm-process-instance-information If you put all your information on XML is like you have two databases and is annoying to keep them sync.
- if you decouple your data, you will be able your UIs, so you could create an ADF app with bounded taskflows (e.g.: Master-Detail) and embed it on your ADF-HumanTask app.
Hope this helps,
Jorge

How to create a master detail form using single table

Hi,
how to create a master detail form using single table.
Regards,
M. Satish

Hi
how to create a master detail form using single table.Make the Master ur pks the details the rest of ur data base field in the detail it's a mater of organizing fields on a form M-Detail...
Now What ?
Regards,
Amatu Allah

Auto Query in Master Detail Form using dynamic page doesn't work

I created a Master-Detail form, and implement AutoQuery using a dynamic page
with the following code :
<HTML>
<BODY>
<ORACLE>DECLARE
nre_ VARCHAR2(100);
BEGIN
nre_ := emp_nre;
if nre_ is not null then
net_portal.Popula_Agregados(nre_);
net_portal.Popula_Docs_Agregados (nre_);
htp.p('<iframe id=myFrame name="myFrame" frameborder=0 width="250%"
height="300"
src="/pls/portal/PORTAL.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=
3
388118140&p_arg_names=_show_header&p_arg_values=NO&p_arg_names=_cad_nre_cond&p_a
rg_values=%3D&p_arg_names=cad_nre&p_arg_values='||nre_||'">
</iframe>');
end if;
EXCEPTION
WHEN OTHERS THEN
htp.p(SQLERRM);
END;
</ORACLE>
</BODY>
</HTML>
It works fine when we access the first time to the page, but if i press the
save button after inserting or updating a detail record, the header record is
lost. How can i avoid this situation ?

I changed query:
select
Replace(
'<img src="#IMAGE_PREFIX#ed-item.gif" border="0" alt="EditMap" usemap="#editmap***id***"></img>
<map name="editmap***id***">
<area shape="rect" coords="0,0,16,16" href="http://apex.oracle.com/pls/otn/f?p=&APP_ID.:'
|| decode ( type, 'FOLDER', '33', '22' )
|| ':&APP_SESSION.::&DEBUG.::P'
|| decode ( type, 'FOLDER', '33', '22' )
|| '_ID,P'
|| decode ( type, 'FOLDER', '33', '22' )
|| '_CALLING_PAGE:' || id || ',&APP_PAGE_ID." ></area></map>' ,
'***id***', id
) Edit,
id,
type,
name,
decode ( type, 'FOLDER', 33, 22 ) target
from tThe idea is - each img uses its own map.
It works now.
Check:
http://apex.oracle.com/pls/otn/f?p=20980:13
Lev
Edited by: le on Nov 3, 2010 11:11 AM

Master Detail form on Oracle EBS

Hello,
This is on Forms 6i, on Oracle EBS 11.5.10.2
I have a Master Detail Form, with one master block and several detail blocks(5 detail blocks).
Each of the detail block is arranged on a tab. That means 5 detail block = 5 tab.
Now I wan to implement opposite of master less operation meaning, i need to prevent detail less operation.
To explain in a simple manner, If user enters a new record in master block, and does not bother to even navigate to any of detail tabs, then it should force user to at enter a record in these detail tabs and should prevent user from exiting the form or committing the form without entering detail tabs.
How can I achieve above functionality?
Thanks,
AB
Edited by: Rich V on Aug 28, 2012 4:26 PM

Hi Liem,
Could you please tell me the Portal Version ?
Some new indexes were created for 3.0.9 version that had help improving the form performance.
Create the following indexes as the portal owner (if the portal version is less than 3.0.9 )However, if the portal has been upgraded to 3.0.8 then they should have these indexes :-
create index wwa_module_bindings_idx1
on wwa_module_bindings$( subscriber_id,
module_id,
module_version,
module_block_id,
module_attr_id)
create index wwa_module_lov_bindings_idx1
on wwa_module_lov_bindings$(
subscriber_id,
module_id,
module_version,
module_block_id,
module_attr_id)
/

Insert new row to master - detail form using bindingsource

Hi all,
I have a form to analyse price of product, the form include master (textbox:slip ID,datetimepicker : date) and detail(datagridview:slipID,productID,price..)
When I insert new row as below code, all inserted to DB but not show on form, I must close and reopen the form the new row will show, how i must to do to fix it
please help, thanks
Select data when form load
ds = New DataSet
damaster = New SqlDataAdapter("select soPTG,ngaybd,ngaykt,khoa = case when sttesign =0 then 'True' else 'False' end from tbl_PTGMaster", conn)
damaster.Fill(ds, "tbl_ptgMaster")
dadet = New SqlDataAdapter("select [SoPTG],[Mahang],[gianhap],[thuesuat],[laigop],[giacu],[giamoi] from tbl_PTGDetail", conn)
dadet.Fill(ds, "tbl_ptgdetail")
ds.Relations.Add("PTG_rel", ds.Tables("tbl_ptgmaster").Columns("SoPTG"), ds.Tables("tbl_ptgdetail").Columns("SoPTG")).ChildKeyConstraint.UpdateRule = Rule.Cascade
BindingMaster.DataSource = ds
BindingMaster.DataMember = "tbl_ptgmaster"
BindingDetail.DataSource = BindingMaster
BindingDetail.DataMember = "PTG_rel"
gridchitiet.DataMember = "tbl_ptgdetail"
txtptgnumb.DataBindings.Add("text", BindingMaster, "soPTG")
dtstart.DataBindings.Add("Text", BindingMaster, "ngaybd")
dtend.DataBindings.Add("Text", BindingMaster, "ngaykt")
cmdlock.DataBinding.Add("Enabled", BindingMaster, "khoa", True, DataSourceUpdateMode.OnPropertyChanged)
setStatus()
SetHeader()
Dim cmdinsert As New SqlCommand("insert into tbl_PTGMaster(SoPTG,ngaybd,ngaykt) values(@SoPTG,@ngaybd,@ngaykt)", conn)
cmdinsert.Parameters.Add("@soPTG", SqlDbType.Char, 10).Value = txtptgnumb.Text
cmdinsert.Parameters.Add("@ngaybd", SqlDbType.DateTime).Value = dtstart.Value
cmdinsert.Parameters.Add("@ngaykt", SqlDbType.DateTime).Value = dtend.Value
damaster.InsertCommand = cmdinsert
damaster.FillSchema(ds, SchemaType.Source)
cmdinsert = New SqlCommand("insert into tbl_PTGDetail(SoPTG,mahang,gianhap) values(@SoPTG,@mahang,@gianhap)", conn)
cmdinsert.Parameters.Add("@SoPTG", SqlDbType.Char, 10).Value = txtptgnumb.Text
cmdinsert.Parameters("@SoPTG").Direction = ParameterDirection.InputOutput
cmdinsert.Parameters.Add("@mahang", SqlDbType.Char, 10, "mahang")
cmdinsert.Parameters.Add("@gianhap", SqlDbType.Decimal, 8, "gianhap")
dadet.InsertCommand = cmdinsert
dadet.FillSchema(ds, SchemaType.Source)
gridchitiet.FinishEditing()
BindingMaster.EndEdit()
damaster.Update(ds, "tbl_PTGMaster")
ds.Tables("tbl_PTGMaster").AcceptChanges()
BindingDetail.EndEdit()
dadet.Update(ds, "tbl_PTGDetail")
ds.Tables("tbl_PTGDetail").AcceptChanges()
BindingMaster.ResetBindings(False)
BindingDetail.ResetBindings(False)

Hello,
The base idea here is if the record is added successfully you would then get the new primary key then manually add the record to the underlying data source. Does not matter if we are talking a single table or a master-detail setup.
The following shows the basics
https://code.msdn.microsoft.com/Adding-new-records-into-bff5eaaf
All of the above is done without using a DataSet yet the same thing needs to happen with a DataSet, simply focus on the one table.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.

Master Detail Form - Problem using built in wizard

Hi There
We are working on Application express 2.2.
We are facing problems for a master detail form using Wizard. The
details are as follows : >>
1) Master table : TS_ENTRY_TXN
trans_id P.K.
2) Detail table : TS_ENTRY_TXN_DETAIL
a)trans_id
b)sub_trans_id Composite P.K.(trans_id,sub_trans_id) & these are
based on sequences.
If i try to build a master detail form using the Wizard, the options
for providing P.K. for master & detail are listed which we used.
As it is a master detail form, we want to carry trans_id to the detail
for updations/insertions which doesn't happen.
The MRU fails with oracle error :
Error in mru internal routine: ORA-20001: Error in MRU: row= 1,
ORA-01400: cannot insert NULL into
("TS_APEX"."TS_ENTRY_TXN_DETAIL"."ENTRY_ID"), insert into
"TS_APEX"."TS_ENTRY_TXN_DETAIL" ( "ENTRY_ID", "SUB_ENTRY_ID",
"SMR_ID", "TASK_ID", "SUB_TASK_ID", "TIME_SPENT", "REMARKS") values (
:b1, :b2, :b3, :b4, :b5, :b6, :b7)
Is there any other way to build master detail wihout wizard.
Could you please suggest us better way to complete this task.

If I'm reading this correctly, then one of the columns in your detail tables' primary key is also the foreign key pointing to your master table? If that's the case, then that's not supported by the wizard. For the wizard generated master-detail form to work properly, you'll have to have a foreign key column in your detail table which is not part of your detail table's primary key.
Hope this helps,
Marc

Problem in Master Detail form when using ADF table for Detail

hi,
jdev version-11.1.2.1.0
i have create Master detail form using datacontrol drag as ADF Master Form Detail Table.
Now when i create a new row in Detail table using CreateInsert button a blank new row created on the top of detail table.
and other row show that data of previous record based on master.
problem is that i want when i click on createInsert button all row of detail table should be blank and when user fill two or three row then commit.
Thanks in Advance

Hi,
if a detail table has data, then createInsert adds to these. If you want to hide existing rows, create a new View Object instance and set its "Retrieve from the Database" option to "No Rows". The use an af:switcher to change the table shown when the user clicks the createInsert button. There is a bit of coding required to have this use case in ADF, but its mostly declarative. Bottom line is that there is no automated option other than creating new rows in a separate page or dialog if you are bothered by existing rows
Frank

Master Detail form - Problems

We are facing problems for a master detail form using Wizard. The details are as follows : >>
1) Master table : TS_ENTRY_TXN
trans_id P.K.
2) Detail table : TS_ENTRY_TXN_DETAIL
a)trans_id
b)sub_trans_id Composite P.K.(trans_id,sub_trans_id) & these are based on sequences.
If i try to build a master detail form using the Wizard, the options for providing P.K. for master & detail are listed which we used.
As it is a master detail form, we want to carry trans_id to the detail for updations/insertions which doesn't happen.
The MRU fails with oracle error :
Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-01400: cannot insert NULL into ("TS_APEX"."TS_ENTRY_TXN_DETAIL"."ENTRY_ID"), insert into "TS_APEX"."TS_ENTRY_TXN_DETAIL" ( "ENTRY_ID", "SUB_ENTRY_ID", "SMR_ID", "TASK_ID", "SUB_TASK_ID", "TIME_SPENT", "REMARKS") values ( :b1, :b2, :b3, :b4, :b5, :b6, :b7)
Is there any other way to build master detail wihout wizard.
Could you please suggest us better way to complete this task.

Hi San Mat,
I would never recommend having a composite PK on any table. Use the sub_trans_id as the PK in its own right and have trans_id as a Foreign Key pointing to the master table.
However, given your existing table structure, what you need to do is add a Default value for the ENTRY_ID field on the child table that points to the Page Item used for the PK field on the master table (you've said trans_id but do you mean ENTRY_ID??). On the column's Column Attributes page, set Default Type to Item (Application or page item name) and the Default to P1_ENTRY_ID (or whatever the name is of field is on the master table's form that holds the PK)
When a new row is added to the child table, the ENTRY_ID from the master table is inserted automatically.
Regards
Andy

Bind variable in Master Detail form

Is there any way to go to a specific master record (bind variable) and it's associated detail information in a master detail form using a link from another report?
Louis

I suspect that he may have the same question I do. Namely, if I have four tables (employees, projects, tasks, and project_assignments) how do I create a master detail form where I can specify the project and the employee via LOVs? The project_assignments table contains foreign keys for employee, project, and task, as well as additional fields relating to the task status.
Currently, I have it set up so that the employee name can be selected and the project is hard coded to the current project.
Is there an easy way to populate the detail records based on two LOVs in the master form?
Thanks in advance,
Fritz

Validating WEBDB2.2 Master-Detail form

I would like to validate a Master-Detail form using Javascript in WEBDB 2.2. There is the option to validate field/forms in other types of Forms (based on Table/View, based on Query, etc...) but I do not see that option in a Master-Detail Form. Any help would be appreciated.
Thanks

If you are on a Portal Version lesser than 3.0.9.8.3, then please try the following to populate
the PART_DESCRIPTION field.
Steps:-
1> Edit the form and go to the Additional PL/SQl section and put the following code in the
"...after displaying the page area" :-
declare
type t_vc_arr is table of varchar2(4000) index by binary_integer;
l_arr_desc t_vc_arr;
l_form_name varchar2(200);
l_form_state varchar2(500);
begin
l_form_name := p_session.get_module().get_name();
l_form_state := p_session.get_value_as_varchar2(
p_block_name => 'MASTER_BLOCK',
p_attribute_name => '_FORM_STATE'
if l_form_state = 'QUERY_AND_SAVE' then
select description
bulk collect into l_arr_desc
from <schema>.table_x;
htp.p('
<script>
var descArr = new Array();
var Fidx = 1;
var formObj = document.WWVM'||p_session.get_id()||';
var fieldName = "'||l_form_name||'.DETAIL_BLOCK.PART_DESCRIPTION.0";
for i in 1..l_arr_desc.count loop
htp.p('descArr['||to_char(i-1)||']="'||l_arr_desc(i)||'";');
end loop;
htp.p('
for (var i=0; i < formObj.length; i++){
if (formObj.elements.name == fieldName+Fidx){
formObj.elements[i].value = descArr[Fidx-1];
++Fidx;
htp.p('</script>');
end if;
end;

Master Detail Forms

Can somebody please explain to me how to set up a Master Detail form using Apex 3.1.0?
The help system is not very helpful.
I have a Master table whose PK is based on a sequence.
I have a Detail table whose PK is the concatenation of the Master table's PK with a VARCHAR2.
Here is how the form is supposed to work: I enter data on the master and detail sections, click an Insert button and 1 record should go into the master and 1 or 2 records into the detail.
But now I am on the pages that ask me to choose the source for the PK's.
The source for the master is easy -- it's the sequence.
But how do I enter the source for the detail table primary key columns?
The first part of the PK comes from the same sequence number that the master table is based on, so I do not want the sequence to increment once to populate the master table and again to populate the detail table.
The second part of the PK comes from a value that was entered on the form.
So how do I accomplish this?
Do I choose "Existing sequence" for the first PK source and "Custom function" for the 2nd?
Or what?
Thanks for your help. Please be as specific as possible in your answer.

I tried creating a master detail form using a view of the current date's attendance(from the MASTER table) as the detail table AND and the table of all date's attendance as the MASTER table. If I want just the current date's attendance from the MASTER table..how do I get those records the show in the detail of the form?

Having problem with creating Master Detail form , please help

I have to work on a project to create a survey system using APEX, as am new on using this tool , am still facing some problems to finish my job..
i created Master/Detail form using wizard, the master form is working fine but am when i try to add data using the detail form its giving me error :
Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "A884FA378C851786DDFE3A33709CB23C", item checksum = "5F8B1EE5CD3D46437455F43B37B9A6A0"., update "ABA"."ABA_SURVEY_SUBCATEGORY_MAST" set "ASCM_CATEGORY_ID" = :b1, "ASM_SURVEY_CODE" = :b2, "ASSM_SUBCATEGORY_ID" = :b3, "ASSM_SUBCATEGORY_DESC" = :b4
i tried to go through the posts from others but i still dunno what is this error !!!& how to solve it..
my master data table have 2 primary keys.. the details data table have 3 primary key all of them using trigger to fire a sequence to get the next_val!!
am desperate & need help urgently for this ASAP.

hello
here is the solution,i hope this might help u.
go to the code of your button and change write the following
go_block('name of your master block');
execute_query(no_validate);
and in the object navigator make the first item in the master
block that it should be displayed in the canvas and it must be a
navigable item too.not a display item.
thank you
Zeeshan Ahmad

Master Detail Form - How 2 update a field in the Detail form using a query?

Hello,
I have a master detail form with, each master record having a fixed(6) number of detail records. One of the fields in the detail record is the PART_DESCRIPTION field. I am trying to update this field by querying Table_X. TABLE_X is in the format of (desciption id, description). Description id runs from 1 to 6.
When the form displays, the PART_DESCRIPTION field for the 6 detail records needs to be automatically populated with the six values of description stored in Table_X. How can this be done?
Tried using session storage objects, but made no headway.
Would greatly appreciate pointers on how to go about doing this.
Thanks.
Dev

If you are on a Portal Version lesser than 3.0.9.8.3, then please try the following to populate
the PART_DESCRIPTION field.
Steps:-
1> Edit the form and go to the Additional PL/SQl section and put the following code in the
"...after displaying the page area" :-
declare
type t_vc_arr is table of varchar2(4000) index by binary_integer;
l_arr_desc t_vc_arr;
l_form_name varchar2(200);
l_form_state varchar2(500);
begin
l_form_name := p_session.get_module().get_name();
l_form_state := p_session.get_value_as_varchar2(
p_block_name => 'MASTER_BLOCK',
p_attribute_name => '_FORM_STATE'
if l_form_state = 'QUERY_AND_SAVE' then
select description
bulk collect into l_arr_desc
from <schema>.table_x;
htp.p('
<script>
var descArr = new Array();
var Fidx = 1;
var formObj = document.WWVM'||p_session.get_id()||';
var fieldName = "'||l_form_name||'.DETAIL_BLOCK.PART_DESCRIPTION.0";
for i in 1..l_arr_desc.count loop
htp.p('descArr['||to_char(i-1)||']="'||l_arr_desc(i)||'";');
end loop;
htp.p('
for (var i=0; i < formObj.length; i++){
if (formObj.elements.name == fieldName+Fidx){
formObj.elements[i].value = descArr[Fidx-1];
++Fidx;
htp.p('</script>');
end if;
end;

Master-Detail Form using Oracle XE...

Similar Messages

Maybe you are looking for