Master pages failing to be applied (along with some unexpected behavior)

Hi all,
I am having trouble getting our structured app/template to apply master pages properly. We're on Frame 11 using an XDocbook, customized app.
Here is the configuration:
1. Reference page structMasterPageMap:
Maps element E:BookInfo  to the "Title Page" master page. 
Maps element E:PrefaceInfo to the "Frontmatter" master page.
2. Frame XML document content:
<bookinfo>
     <title>
     <edition>
     <copyright>
</bookinfo>
As you can see, this doc does not yet have a PrefaceInfo element, although one is allowed by the DTD.  So the obvious solution is to either: 1) add one (wrap the <copyright> element in a <prefaceinfo> element as allowed); or 2) add an "E:Copyright" mapping to the ref page. Yet, neither of these work.  Here's what occurs:
Solution A: On the Ref page, add a mapping from E:Copyright to the "Frontmatter" master page:
1. Open the document in Frame and note that the master page Title Page is applied, but the master page Frontmatter is not, as expected.
2. On the ref page, add the E:Copyright mapping to apply the Frontmatter master page.
3. Reapply Master Pages, and the Frontmatter page is applied, as expected.  All is good....except.  When you close and then re-open the document, no master pages are applied, not even the Title Page which had previous worked. Huh, what?
4. Remove the E:Copyright mapping from the ref page, reapply Master Pages, and the Title Page master page is again applied.
Note: This behavior is reproducible whether I replace the E:PrefaceInfo with E:Copyright on the reference page, or retain both. I can also reproduce this by using the paragraph tag instead, of the element, i.e. P:FrontmatterCopyright.
Solution B: In the document, add a <prefaceinfo> element:
1. Open the document in Frame and note that the Title Page master page is applied while the Frontmatter is not, which is expected.
2. Wrap the <copyright> element in <prefaceinfo>.
3. Reapply Master Pages.  Nothing happens, i.e. the Frontmatter master page is not applied.
4. Save, close, and reopen the document.  The Title page is applied, but the Frontmatter is not.
Yes, I have checked and rechecked that the actual master page names match those entered into the reference pages, including case.  :-)
Possible conflicts/factors?
1. Could the structure of the document (as allowed by the DTD) affect master page application? The element <copyright> can exist both inside a <prefaceinfo> and independently under <bookinfo>.  This doesn't seem likely, especially because as a test, I saved the doc as .fm, discarded the structure, updated the ref page to use para tags instead -- and still the master pages are not applied correctly.
2. Pagination can affect this -- at first we had Format>Page Layout>Pagination set to "Single Sided" so I thought that was why the left-hand Frontmatter was being ignored. But I have ruled that out; the template is now double sided, and Frontmatter is a left page.
I am stumped!  Thanks in advance for any ideas.
- Shelley
Shelley Hoose
Sr. Docs Developer, Rogue Wave Software

Is Adobe World Ready Paragraph Composer the default in CS6 or something? Perhaps that must have caused some issue. I still don't know. I can confirm that no one else has touched this particular file, and it was created and edited only in CS6.
For new basic styles, you recommend aforementioned composer or the old Adobe Paragraph Composer, especially if the work is only in English (UK/India)?
Thanks for your time.

Similar Messages

  • Plugin download page opens as adiitional tab along with home page tab. which needs to be stopped

    Plugin download page opens as adiitional tab along with home page tab. which needs to be stopped

    Have you tried resetting your home page from Options > General? Which plugin is that? I have not seen a plugin update open a new tab.

  • How can you get get two master pages to repeat in a document with one of them having numbering.

    How can you get two master pages in Indesign to repeat when one of them has a numbering section and the back side is a common back. For example, Master A has numbering 001-500 and Master B is the common back for all 500 pages.

    My guess is you either want to use a numbered list for the numbering, rather than a page number marker, or you want to make two files and print a single page file with the static text 500 times, then flip the stack and print the 500 page file.
    What are you trying to do?

  • Using Custom css in master page but it changing the alignment when some user log in

    Hi all,
    I created a custom css and i applied on master page,this css is good for admin log in,but other group users are loges in,  css is  changing in Alignment of Pictures how to solve this issue ,  I given the permission for the style library where
    i placed the images and css file 

    hi,
    This usually happens to me when the CSS file is not published or approved yet. Where is your new CSS located? Have a look
    with SharePoint Designer or browse to it and publish/approve it.
    use refrence from below links
    http://sharepoint.stackexchange.com/questions/53565/css-and-js-files-work-for-admin-but-not-for-members-and-visitors-sp-2013
    http://sharepoint.stackexchange.com/questions/20558/sharepoint-2010-branding-i-see-it-as-site-admin-but-rest-users-dont
    Whenever you see a reply and if you think is helpful,Vote As Helpful! And whenever you see a reply being an answer to the question of the thread, click Mark As Answer

  • Pages assigned to a Role along with wpc are missing

    Hello Experts,
    I have created a website and integrated with the Role. The website is being displayed succesfully. Now, theproblem is when I assign another Page to the role it's not visible? Any ideas on what's going wrong?
    Thanks in advance.
    Regards,
    RN

    Hi,
    WPC pages are assigned to navigation points by external connector. This connector defines the sub-navigation. All other content added to the navigation point are not taken into account
    Role
    - Folder (-> WPC navigation integrated via external connector)
    - - Page (not visible)
    br,
    Tobias

  • Export List Of Images Selected Along With Some MetaData

    It would be extremely beneficial for LightRoom to have the ability to have an Export feature that creates an ASCII or XML file format (or other common format) of the image file names (and path) that are highlighted/selected. Since LightRoom is a great program that can be used for client previews, this export feature would allow future integration with billing packages to complete the order.
    Ideally the export file would contain the selected image path and file name, and metadata such as cropping size selected (especially if selected from the drop-down selection of crop sizes), keyword tags (and/or folder name), title, rating and label.
    Thank you for your consideration of this feature request.

    I definitely need something similar as well.
    E.g. I have a website with a slideshow functionality in it - it would be really useful to export in a textfile the custom order of the pictures prepared for a new slideshow.

  • After installing Mavericks my iMac has become increasingly unstable with various applications crashing along with some white screen, kernel panic-style restarts. This has even continued after a fresh install, what should I do now?

    Following an Apple Support Team member's advice, I retrieved as many files as I could and erased and repaired the HD before completing a fresh install from a bootable USB. Once I restored all of my software I set it backing up to Time Machine over night only to find that it had crashed and restarted over night before that had completed. I attach the crash report below:
    Anonymous UUID:       F1CB4D58-C5DE-D8BB-D543-3270C7724738
    Wed Oct 30 21:51:58 2013
    panic(cpu 2 caller 0xffffff80070dc19e): Kernel trap at 0xffffff80071c5e3d, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000001018, CR3: 0x0000000029716000, CR4: 0x0000000000000660
    RAX: 0xffffff81d7fa3740, RBX: 0xffffff80368dc8c2, RCX: 0x0000000000001000, RDX: 0xffffff8027862650
    RSP: 0xffffff81d7fa3720, RBP: 0xffffff81d7fa3770, RSI: 0x0000000000000005, RDI: 0xffffff8027862650
    R8:  0xffffff81d7fa3490, R9:  0xffffff81d7fa348e, R10: 0x0000000000002000, R11: 0x000000000000065e
    R12: 0xffffff80368dc8f0, R13: 0x0000000000000000, R14: 0xffffff80368dc8c2, R15: 0xffffff80368dc8e8
    RFL: 0x0000000000010202, RIP: 0xffffff80071c5e3d, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000001018, Error code: 0x0000000000000002, Fault CPU: 0x2
    Backtrace (CPU 2), Frame : Return Address
    0xffffff81d7fa33b0 : 0xffffff8007022f69
    0xffffff81d7fa3430 : 0xffffff80070dc19e
    0xffffff81d7fa3600 : 0xffffff80070f3606
    0xffffff81d7fa3620 : 0xffffff80071c5e3d
    0xffffff81d7fa3770 : 0xffffff80071db854
    0xffffff81d7fa37c0 : 0xffffff80071daf60
    0xffffff81d7fa3800 : 0xffffff80071e1fa0
    0xffffff81d7fa3830 : 0xffffff80071d9e8f
    0xffffff81d7fa38f0 : 0xffffff80073611e4
    0xffffff81d7fa3a00 : 0xffffff80073697cb
    0xffffff81d7fa3bd0 : 0xffffff80071fc9db
    0xffffff81d7fa3c30 : 0xffffff80071d544b
    0xffffff81d7fa3cb0 : 0xffffff80071d4da4
    0xffffff81d7fa3d70 : 0xffffff80071c2ebf
    0xffffff81d7fa3f50 : 0xffffff800743de23
    0xffffff81d7fa3fb0 : 0xffffff80070f3e06
    BSD process name corresponding to current thread: backupd
    Mac OS version:
    13A603
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:     0x0000000006e0
    Model: iMac11,3, BootROM IM112.0057.B01, 4 processors, Intel Core i5, 2.8 GHz, 16 GB, SMC 1.59f2
    Graphics: ATI Radeon HD 5750, ATI Radeon HD 5750, PCIe, 1024 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533643465238432D48392020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533643465238432D48392020
    Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533643465238432D48392020
    Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533643465238432D48392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0-P2P
    Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: Hub
    USB Device: BRCM2046 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Internal Memory Card Reader
    USB Device: Hub
    USB Device: My Passport 070A
    USB Device: Built-in iSight
    USB Device: IR Receiver
    Thunderbolt Bus:

    What else do you need?
    Crashed again overnight during back-up:
    Anonymous UUID:       F1CB4D58-C5DE-D8BB-D543-3270C7724738
    Fri Nov  1 00:25:41 2013
    panic(cpu 2 caller 0xffffff80184dc19e): Kernel trap at 0xffffff80187cf663, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000008014, CR3: 0x000000002b62c000, CR4: 0x0000000000000660
    RAX: 0x0000000000000000, RBX: 0x0000000000008000, RCX: 0xffffff81e9e8bcc8, RDX: 0x0000000000000001
    RSP: 0xffffff81e9e8bc60, RBP: 0xffffff81e9e8bcb0, RSI: 0xffffff8042096108, RDI: 0x0000000000008000
    R8:  0xffffff81e9e8bcd0, R9:  0xffffff81e9e8be70, R10: 0x000000000000064e, R11: 0x0000000000000297
    R12: 0x0000000000000000, R13: 0x0000000000000001, R14: 0x0000000000000000, R15: 0xffffffffffffffff
    RFL: 0x0000000000010202, RIP: 0xffffff80187cf663, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000008014, Error code: 0x0000000000000000, Fault CPU: 0x2
    Backtrace (CPU 2), Frame : Return Address
    0xffffff81e9e8b8f0 : 0xffffff8018422f69
    0xffffff81e9e8b970 : 0xffffff80184dc19e
    0xffffff81e9e8bb40 : 0xffffff80184f3606
    0xffffff81e9e8bb60 : 0xffffff80187cf663
    0xffffff81e9e8bcb0 : 0xffffff80187cf310
    0xffffff81e9e8bd00 : 0xffffff80187cea6f
    0xffffff81e9e8bde0 : 0xffffff80185ff47a
    0xffffff81e9e8be50 : 0xffffff80187bf04c
    0xffffff81e9e8bec0 : 0xffffff80187bc6de
    0xffffff81e9e8bf10 : 0xffffff80187bee5a
    0xffffff81e9e8bf50 : 0xffffff801883de23
    0xffffff81e9e8bfb0 : 0xffffff80184f3e06
    BSD process name corresponding to current thread: mdworker
    Mac OS version:
    13A603
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:     0x0000000018200000
    Kernel text base: 0xffffff8018400000
    System model name: iMac11,3 (Mac-F2238BAE)
    System uptime in nanoseconds: 285206678247
    last loaded kext at 264611740123: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f9a865000, size 65536)
    last unloaded kext at 114432919226: com.apple.driver.AppleUSBUHCI          650.4.0 (addr 0xffffff7f9909b000, size 65536)
    loaded kexts:
    com.apple.filesystems.msdosfs          1.9
    com.apple.filesystems.smbfs          2.0.0
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AppleBluetoothMultitouch          80.14
    com.apple.driver.AGPM          100.14.11
    com.apple.filesystems.autofs          3.0
    com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.driver.AppleHDA          2.5.2fc2
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.kext.AMDFramebuffer          1.1.4
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.AMDRadeonX3000          1.1.4
    com.apple.driver.AppleMikeyDriver          2.5.2fc2
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleHWAccess          1
    com.apple.driver.AppleLPC          1.7.0
    com.apple.kext.AMD5000Controller          1.1.4
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.driver.AppleBacklight          170.3.5
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.driver.AppleUSBCardReader          3.3.5
    com.apple.driver.AppleIRController          325.7
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.iokit.SCSITaskUserClient          3.6.0
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.4.0
    com.apple.driver.AppleUSBHub          650.4.4
    com.apple.iokit.AppleBCM5701Ethernet          3.6.9b9
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.AirPort.Atheros40          700.74.5
    com.apple.driver.AppleAHCIPort          2.9.5
    com.apple.driver.AppleUSBEHCI          650.4.1
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          2.0
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
    com.apple.driver.AppleBluetoothHIDKeyboard          170.15
    com.apple.driver.AppleHIDKeyboard          170.15
    com.apple.driver.IOBluetoothHIDDriver          4.2.0f6
    com.apple.driver.AppleMultitouchDriver          245.13
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.driver.DspFuncLib          2.5.2fc2
    com.apple.vecLib.kext          1.0.0
    com.apple.iokit.IOAudioFamily          1.9.4fc11
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.iokit.IOSurface          91
    com.apple.iokit.IOAcceleratorFamily          98.7.1
    com.apple.iokit.IOBluetoothFamily          4.2.0f6
    com.apple.driver.AppleSMBusPCI          1.0.12d1
    com.apple.kext.AMDSupport          1.1.4
    com.apple.AppleGraphicsDeviceControl          3.4.12
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleHDAController          2.5.2fc2
    com.apple.iokit.IOHDAFamily          2.5.2fc2
    com.apple.driver.AppleSMC          3.1.6d1
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.5.1d27
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.6
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.iokit.IOGraphicsFamily          2.3.6
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.0
    com.apple.iokit.IOUSBMassStorageClass          3.6.0
    com.apple.iokit.IOUSBHIDDriver          650.4.4
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.driver.AppleUSBComposite          650.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.6.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
    com.apple.iokit.IOEthernetAVBController          1.0.3b3
    com.apple.driver.mDNSOffloadUserClient          1.0.1b4
    com.apple.iokit.IOUSBUserClient          650.4.4
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IO80211Family          600.34
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOAHCIFamily          2.6.0
    com.apple.iokit.IOUSBFamily          650.4.4
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.10
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          21
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.8
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.pthread          1
    com.apple.kec.corecrypto          1.0

  • Pm-utiles problems along with some little things

    I just install Arch Linux into my Toshiba Portege M100 Laptop. I get pretty much everything working, even the FN key. And Arch runs amazingly fast on this old machine.
    However, I do encounter two problems. One of them is the suspend/hibernate problem. My laptop seem able to do both, however, it can not come back to my desktop. It seems like stop after they load everything back, and give me a black screen. There is nothing I can do but hold the power buttom to restart my computer.
    The second problem is the gnome network-manager applet. I use it with xfce, but whenever I do a save session for futrue logins, the next time I logins in there is two of them, and the next next time I login there is like 3. and so furth. here is what I set for my autostart command with with Autostart applications under setting. "nm-applet --sm-disable"
    This is not really a problem, but it kind of bothers me, and it is the action button applet. After I install a the arch linux Icon set, it becomes a little green man(I dislike that icon so much, haha) I would like it change back to the normal power button icon. which to me looks much nice. And for something even I change Icon set for the theme, it doesn't effect that action button applet.
    At last, if you have any good suggestion that I make the laptop installation better, please let me know.
    Thank you so much

    For the problems hibernating/suspending, you'll probably have to specify a "quirk" with the suspend command. Read the pm-suspend docs and google "pm-suspend quirks". You may be able to find someone else's report of successfully using the same laptop with quirk such-and-such. Else it will take some trial and error to see what works.
    For your second question: I think you're giving the right command in autostart. (Possible there should be a "&" at the end of it, but I don't think that's necessary.) You've got some problem with your saved session. To flush everything out, here's what I'd do. Completely uninstall network-manager. Log out, and log back in. Log out, saying don't save session. Log back in, Log out, saying save session. Log in and re-install network-manager. Now log out saving session again. Now test to see if your problem is fixed.
    I bet that some of the steps I just described aren't necessary, but I'm not sure which ones.
    Last edited by Profjim (2008-08-30 05:29:06)

  • Why is the tab being edited at the "master" page always in active state when i am selecting other tabs?

    i am trying to create a basic mobile site with adobe muse. i have created a page with tabbed panels using the the tabbed panel widget and link each tab to its respective pages. let's call my tabs 1, 2 and 3. the linking are fine, but everytime i selected 2 or 3, tab 1 will also be in active state. the selected tab is with reference to the tab that is being edited at the "master" page, i.e, if i am editing tab 2 at the "master" page, tab 2 will always be active when i select tab 1 or 3.
    i do not need this kind of confusion. can anyone help?
    i am using adobe cc. thanks!

    Hi,
    This is an expected behavior  of tabbed panel . When you add a tabbed panel in the master page by default one of the tabs is Active. So whenever you load the page, whichever tab you had selected in the Master page will always be active along with the other tab which you used as a link.
    I would suggest you to use a Menu widget or a composition widget in order to avoid this.
    Regards,
    Rohit Nair

  • Using Expression Web for editing master pages

    I have SP Foundation 2013 and I am trying to edit a master page in Expression web since SP Designer no longer has design view. Reading the documentation it says that any HTML tools such as dreamweaver, Expression Web etc can be used.
    I have mapped a drive to the Master Page Gallery and made a copy of the master page I am trying to edit.
    When I open it up in Expression Web I get the following error:
    Error creating Control - SPHtmlTag
    Unknown Server Tag Sharepoint:SPHtmlTag
    Can anyone help? I'm by far no web developer or Sharepoint Developer and I just want to make some simple changes to the master page such as adding a footer with some links/images etc so it displays on all pages within the site, which is just a basic intranet
    site for a small company.
    Any help would be appreciated, thanks.

    you use HTML tools such as dreamweaver to desgin the .html file associated with the .master file:
    http://blogs.technet.com/b/speschka/archive/2012/07/27/using-dreamweaver-and-design-manager-with-sharepoint-2013.aspx
    GuYuming
    TechNet Community Support

  • Custom Master Page issue with Document Set Libraries

    Details: Publishing site using SharePoint 2013.  The SharePoint is on my company's servers.
    Have a custom Master page that has a navigation banner (built with HTML/CSS/javascript).  The site has it applied successfully to the "Site Master Page" but when I also apply it to the "System Master Page", the libraries that have
    Document Set type content do not show the files within.   We'd like to be successful in applying to the "System Master Page" as that allows the banner to show when an actual library is accessed.    Any suggestions, please?

    Thanks. I've been experimenting with this for a few days now, and there's lots I don't understand about why and such, but your process above works. That's a big load off me right now and I really appreciate it. I'm going to be able to survive the initial
    roll-out and implementation of the new site. Going forward, I've got lots to learn and find out, I've already heard that there's a desire to really redesign the master page for the site and subsites, way beyond the little CSS customization I did. Fun.
    If you've got a little time though, perhaps you can provide some explanation. If not, no problem.
    On step 6, when I do as you detail, click the System Master Page and reset all the subsites, it seems to work fine with my custom master page. If I do that with the Site Master Page settings, my custom page causes the redirect issue in the subsites again.
    This is whether I do the Site Master Page by itself, or in conjunction with the System Master Page settings. If I revert back to the Seattle master page in the Site Master Page settings and my custom pate in the System Master Page, the issue goes away again.
    It is completely messing with my head, trying to figure out why that would be, and this is all beside trying to figure out why adding the one little CSS reference to the Seattle master to create my master page breaks things (sometimes!).
    Just fyi, what I've ended up with for now is pulling my custom master page out of the system and using the Alternate CSS URL to add my custom CSS to the Seattle master page on the sites. As I thought about all this, I decided I didn't want to leave the breakable
    custom page out there for some unsuspecting site manager to accidentally pick and get everyone screaming about the broken sites.
    Thanks again,
    Steven

  • Master Page Bugs? Won't Update Changes or Apply New Page Correctly.

    I've been working with master pages for our new project templates and have found what appears to be several big problems:
    1. When I make changes in the Master Page (.htt file), none of those changes propogate to the topics that have been assigned this same Master Page. Shouldn't it do this?
    2. As an alternative, I tried applying a Master Page to multiple topics in the Topic List pod. The first problem with that is that you cannot apply the existing Master Page. So, I had to create a fresh Master Page with my changes, then tried applying it. However, several problems occur. Firstly, none of the new Master Page formatting appears correctly. Secondly, for some reason it is duplicating breadcrumbs at the top of the page (each of the Master Pages, before and after only had one breadcrumb). It seems to have combined some of the formatting from both before and after Master pages.
    I should also note that when I apply the Master Page with any changes to a new topic, it does work correctly.
    I have read the documentation thoroughly and feel I am doing this correctly. The problem seems to be that the functionality doesn't work as promised. I see this as a grave problem. Our templates are likely to change with time, and I need the ability to apply changes en masse.
    Does anyone know what might be the problem?

    Hi there
    First, you must understand that Master Pages are used in two completely different ways. Sounds like you are making changes to the Body Placeholder of the Master Page and expecting to see those changes influence the topics linked. Sorry, but that has never worked.
    So here are the two ways Master Pages are designed to work in RoboHelp.
    Method 1 - Used to infuence EXISTING content.
    Perhaps you have created 1,000 topics and you now wish to add a Header, Footer or both to these existing topics. You define a Master Page and add a Header, Footer or both to the Master Page and You associate it with the topics. All those topics now have a Header and/or Footer. Any changes to the Header and/or Footer are populated across all linked topics.
    Method 2 - Used to influence NEW content you create.
    Perhaps you know that you will be creating many topics that should have the same look and feel. Maybe each of them begin with a table containing an image and some text. So you define a Master Page and configure the Body placeholder as you wish to see it. When you create new topics, you point to the Master Page so that as the topics are created, the Body content of the Master Page is populated into the topic as a starting off point. Once the topic has been initially created, changes to the Master Page ARE NOT reflected in the topics. This works identically to making a copy of a document. The copy looks identical to the original. And any changes to the original will never be copied over to the copy. Only NEW copies will receive the changes.
    As far as the Breadcrumbs go, you likely have GLOBAL Breadcrumbs enabled in the Single Source Layout recipe. This means that every topic gets Breadcrumbs during the process of creating the output. If you are trying to employ SELECTIVE Breadcrumbs by adding the PlaceHolder to the Master Page, you need to disable the GLOBAL Breadcrumbs in order to prevent seeing double.
    Hope this helps a bit... Rick

  • Can't select text boxes with Type Tool to write in on pages, only on Master Page

    I'm unable to use the Type Tool to select the tax boxes on a document page in Indesign CC. I can select it on the Master Page. I can write on the Master Page. If I apply the Master Page afterwards, the written text from the Master Page appear on the document page, just as it should. But whenever I try to select a column on a document page, all the Type Tool does is draw a new text box (which I can select and write in). What's up with that? I applied the Master multiple times. If I can write on a the Master Page, why not on the document page?

    Individual master frames can be overridden on a document page by holding down Cmd + Shift (Mac) or Ctrl + Shift (Windows) and clicking on them with the Selection tool.
    Empty master text frames are generally more useful for placing external text files and having them flow from page to page than for typing, and they need not be overridden to do that -- just move the loaded cursor inside the frame.

  • Master pages not applying to site and subsites

    I am having an issue with a master page not applying to a site and subsites. The site is created using the community template and has the following hierarchy:
    TopLevel: SharePoint Central - server/SPCtrlv2/sitepages/welcome.aspx (webpart page)
    subsite1: Community - server/SPCtrlv2/community/sitepages/categories.aspx (community template)
    subsite2: Learn - server/SPCtrlv2/learn/pages/default.aspx (publisher template)
    subsite3: Showcase - server/SPCtrlv2/showcase/default.aspx (blog template)
    The community site was created and then the Welcome page was changed to point to the Welcome.aspx location. (not sure if that matters) When making the application from the top level via Site Settings > Look and Feel > Master Page > dropdown from
    Site Master Page (SPC_Global), the master is only applying to the Learn sub site. In SP Designer, the master page/ css files are not showing although they are on the site. (Using designer 2010)
    I was able to apply the master with no problem when the top level used the publisher site template. Unfortuately, the community template is not available at the sub site level so we created a new site with the community template at the top.
    Any guidance you can provide is much appreciated

    Hi,
    According to your description, you want to apply master page to all sub sites.
    Did you use SharePoint 2010 or SharePoint 2013?
    If you use SharePoint 2013, you may need to use SharePoint Designer 2013 to find the master page file.
    For applying master page to all subsites, I suggest you do as the followings:
    1. Make sure you have enabled the “Reset all subsites to inherit this site master page setting” in the Top Level “site
    setting”->”site master page setting”.
    2. Check whether you have enabled “Inherit site master page from parent of this site” in the “site setting”->” site master page setting” of each sub site.
    There are some detailed articles for your reference:
    http://davecoleman146.com/2011/06/28/apply-master-page-for-all-subsites-in-sharepoint-2010/
    http://msdn.microsoft.com/en-us/library/office/jj862339(v=office.15).aspx
    Best regards
    Patrick Liang
    TechNet Community Support

  • Apply footer to topics without using master page

    Does anyone here know of a way to apply a footer to multiple topics without using a master page? I'm using TC3 with a linked Frame book.
    Thanks in advance for any help!

    There is probably a better way to do this, but I found a work around.  I set the fields on the master page to "Use Global Data" in the Binding tab.  This means that the value for that field will be the same for any field with the same name.  Then, on my main page, I have a hidden field with the same name that I can populate with ColdFusion and the value will also show in the master page.
    If anyone has a more elegant way to do this, please respond.  I am new to LiveCycle and I'm sure there are a lot of features that I am not aware of that could help me.

Maybe you are looking for

  • Unable to assign Chart of Depreciation to Company Code

    Dear Experts, I am trying to assign newly created chart of depreciation to my company code but system is not allowing me giving the following error message: "You cannot process company code ****, it contains assets". When I go for F1, then further it

  • How can I write to data file only near to SW Trigger samples?

    Hi everyone I am working on a model based in this one: http://zone.ni.com/devzone/cda/epd/p/id/34#0requir​ements I would like to save the data once the trigger is reached, with some data near to the impact. Where should I place a "write to measuremen

  • Itunes wont even launch. i removed program and downloaded new copy, still wont lauch

    itunes will not launch. it used to work on this pc. i uninstalled it, downloaded a new copy, and tried again. still won't work. help. and thanks.

  • .url files launch in IEplorerer instead of Safari

    .url files launch in IExplorer instead of Safari, how can I fix it. I try to associate .url file (Internet Shortcut) to Safari, but windows vista does not let me change the Default Program (Internet Explorer. Any help will be appreciated. Thanks

  • Adobe form central shutting down.

    Hi I am not very happy regarding the way adobe form central has been announced its shutting down, I have received no email regarding this issue only notification on log into my account. there are no support or option to contact adobe regarding this m