Material inventory being posted in multiple SLOC at the same time

When the same material is stored in multiple SLOCs and physical inventory counters are trying to enter the count at the same time the system stops them  with error- "material is blicked by user xxxx" etc. Please note at this client they do not block materials when being counted.
Is there a way to be able to do this- meaning- multiple people can be entering the inventory count for tha same material at the same time?

Hi Rajendara,
this means two person are posting with same material document for the same material this cannot be done.
i mean two users cannot use the same document at the same time, if this is your requriement tell them to use different material document at the same time so that it doesn't over lap. i mean if you have 10 documents let one start from 1 & the other person start from 10.
Regards
Rang

Similar Messages

  • Can you use sync on multiple computers at the same time? ie have someone else logged into your firefox account for you whilst you are also logged in

    I am trying to sign up to something but there is only a short window so was going to ask a friend to sign in at the same time using my account to try to sign up (with my password being saved into my firefox account)

    Hi. Yes, you can use Sync on multiple devices at the same time. I use it to keep my bookmarks in sync across my desktop and Android versions of Firefox.

  • CRVS2010 - open multiple rpts at the same time, like sheets in a xls file ?

    Hi all,
    is that possible to open multiple reports at the same time, like sheets in a excell file ?
    Is that possible create tabs beside the MainReport tab ? or include reports in the Group Tree ? how can I do it ?
    The application is in asp.net with VS2010 and CR2010.
    The reports used to be in excell with three sheets and now we are migrating them to crystal reports, how can I create the report with those three sheets ?
    thanks !
    Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
    Edited by: Ludek Uher on Aug 31, 2010 7:33 AM

    I'll make the suggestion to the Program Management group.
    You may want to do a post to the [Crystal Reports Design|SAP Crystal Reports; forum and ask them how they's fake that sort of a requirement. E.g.; there may be some way to make this report look the way you want, but it will be best to ask the experts. Don't mention CRVS2010 as they don't support it and most likely you will not get an answer.
    Ludek

  • WDS 2012 R2 - Cannot PXE multiple clients at the same time

    Hello All,
    This is my first post on here so I apologize if this is the wrong place.  I work for a school district and we are implementing WDS 2012 R2.  We've been extremely satisfied with the speeds and ease of use through unattend files.  However, for
    the past month I've been looking for a possible answer to a problem that has plagued us from day one of implementation.
    So here's the problem:
    I have a stand alone WDS server which is not a domain controller and is not our DHCP server.  I have IP helpers and broadcast forwarders setup on the network.  As well as option 66 and 67 in DHCP.  So far so good right!
    Well that's partially right.  When we boot one client at a time to the WDS server.  Everything works as intended.  We can TFTP the necessary files from the WDS server.  Everything boots up and we're off and running.
    However, if we boot up two or more clients at the same time.  The WDS server never responds to the traffic.  The clients get their DHCP information.  They start the referral and download from the WDS server, but get no response.  I'm
    really hoping that someone on here would have some insight of something I can try.  I've about exhausted my list of peers and contacts.  They're all stumped as well and were smart enough to stay with 2008 WDS.
    I would prefer to stick with 2012 R2 since it's setup and working for the most part.  With only this one hiccup.
    Thanks in advance for any guidance!

    Hello Daniel,
    I appreciate the reply and apologize for taking so long to get back to this.   Things have been a little hectic over here.
    I have tried everything on this forum and I am still unsuccessful in PXE booting multiple clients at the same time.
    Multicast is enabled on the server, and it works for the clients.  However, as stated in the original post.  I cannot boot multiple machines at the same time.  I can start them from the image selection screen around the same time though.  So,
    that appears to be working fine.

  • How can I install one app on multiple iPads at the same time?

    We have a volume purchasing account, but when purchasing an app we get multiple serial numbers that all seem to need to be entered individually. The iPhone config Utility will not sync multiple iPads at the same time. Am I missing something? This cannot be the method for mass deployment, it seem too complicated.

    You can do a  backup of you iPad then restore the backup to many devices.
    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495
    Mobile Device Management Solutions for iOS
    http://www.apple.com/iphone/business/integration/mdm/
    http://www.apple.com/ipad/business/resources/
    "iOS mobile device management (MDM)
    With an unmatched breadth of features, a Self Service console forover-the-air (OTA) distribution of in-house and app store apps, and integration with Apple's Volume Purchase Plan (VPP), the Casper Suiteallows administrators to easily achieve the four major tenets of iOSmobile device management: Inventory, Configuration, Security Management, and App Distribution."
    http://jamfsoftware.com/products/casper-suite/

  • How can I get rid of multiple pictures at the same time?

    how can I get rid of multiple pictures at the same time?

    Adobe Bridge, lightroom and your file browser (windows explorer or Mac Finder) can select multiple pictures at once and then delete. If you are looking for more than that for information, you will need to be more specific at what your doing, what OS you have, and version of software your using. If necessary post screen shots so we can see what your doing. The more information we have the more detailed of an explaination can can give back to you.

  • How do I view two clips overlapping each other, each being semitransparent to see both at the same time, so that I can decide where to stop of the first clip and start of the second clip? Thanks.

    Basically I want to combine to clips with correct timings. For that I want to view the two clips overlapping each other, each being semitransparent to see both at the same time, so that I can decide where to stop of the first clip and start of the second clip? Thanks.

    see my reply in your other post:
    You're familiar with the TRIM-tool?
    http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632caff
    http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632d8e4
    http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632d9ae

  • Does af:commandButton submit multiple requests at the same time?

    Hi experts,
    I have a question about af:commandButton behavior.
    I have two commandButtons in a page. They are button1 and button2.
    Button1 takes a few seconds to complete its request process.
    So when I click button1, I can click button2 although button1 request is still being processed.
    I checked how ADF faces handled this situation with servlet filter.
    And I saw that button2 request was always submitted after button1 request was completed.
    Due to this behavior, I would assume that commandButton is designed not to submit multiple requests at the same time and guarantees click order.
    However I couldn't found any documents specifying this feature of commandButton.
    If anyone knows it, could you share?
    I know ADF Faces has busyStateListener to prevent user inputs during request round trip.
    But I'd like to make it sure that I don't need to use busyStateListener if I just want to keep processing order.
    Regards,
    Atsushi

    Hi,
    Does anyone know the document specifying the behavior of af:commandButton in case I click two buttons in a page almost simultaneously?
    Any help will be much appreciated.
    Thanks in advance,
    Atsushi

  • Is there a way to delete multiple pictures at the same time from the iphone4s?

    Is there a way to deleter multiple pictures at the same time, from my iphone4s? I know how to delete one at a time. Thanks

    Open your Photos App > Camera Roll > At the top right corner you will see a rectangle with a right arrow, select that. Now you can select as many photos as you want and you can hit the red Delete button on the bottom right.

  • Can you opening multiple albums at the same time in Photo (not iPhoto)?

    When converting the iPhoto library to Photo most of the albums that were in place in iPhoto converted to albums in Photo . . . .but not all. Some were retained as events mainly those that were folders within an album. In order to move them to the right album I would like to have multiple albums open at the same time (side by side) so that I can make sure not to duplicate photos or move them to the wrong spot.
    I cant see how to do this, it seems that I can need to open one album and check phots and then close to look within and other and rely on memory. There must be a more efficient and accurate way to do this?

    All of the events in iPhoto were converted to albums and are located in the Folder titled iPhoto Event in the sidebar of Photos. 
    You can't open multiple albums at the same time.  You can create a smart album that will do essentially the same thing with the following criteria:
    Album is "A"
    Album is "B".
    The smart album will display all of the photos in those two albums.

  • How to support multiple users at the same time?

    Hi all,
    I have a Labview software which controls a analyzer via GPIB connector. When user A is using the software, user B has to wait until A is done. But actually, the analyzer is not very busy, when user A is using the software.
    I want user A, B, C and D can use the software at the same time. just like we can open Multiple websites at the same time.
    How can I program the software, so that the software can be open multiple times? Do you have any example?
    Thanks a lot.
    Steven
    Solved!
    Go to Solution.

    Are all the users going to be measuring the exact same thing from the same instrument?
    It would be possible to write a separate instrument server application that would handle all the direct interactions with the instrument. When one of the users needed to access the instrument, they would gain access to it through this server.
    The big, Big, BIG caveat is that each interaction with the instrument would need to be atomic. In other words each access would need to configure the instrument, initiate the reading, report the results, and then reset the instrument back to some known default value.
    As Dennis said, not a trivial process, but probably do-able...
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • In Elements 7.0, how can I delete multiple photos at the same time?

    In Adobe Photoshop Elements 7.0, how can I delete multiple photos at the same time?   Please be a little specific so I can follow your instructions as I'm not real smart at computers; I'm an intermediate user.  Thank you.

    Shift-click the photos or Ctrl-click them to select them, then right-click one of them and choose Delete from Catalog. They will all go together.

  • How do you apply a master page to multiple documents at the same time?

    How do you apply a master page to multiple documents at the same time?

    Hi friends,
    Thank you for trying to help me out.
    Let me explain it a bit to remove the ambiguity.
    I have 10 documents nested under a book. Each of these documents have 'n' number of pages. I want to apply my custom made master page "First" to the first page of all these 10 documents in one go. The remaining pages of the documents have to be in default "Right" master page format. How will I do it?
    I tried selecting all the documents and importing the formats from another document with the custom made "First" master page. The master page format is getting imported but the first page of all the documents still remain with the default "Right" master page format.
    I think now my question is more clear...

  • Lightroom CC issues with multiple export at the same time

    Back before Lightroom updated to the CC version, I was able to use export presets to send 4 different versions of the photos I'm working on at the same time (A Full Size for client at certain size, full size for myself, web-sized with watermark and a thumbnail). Since updating to the CC version, I'm only able to start the export process on two of these versions before the system simply becomes crippled and I cannot even navigate through Lightroom without it chugging along.
    For reference, I'm running a 2014 rMBP with 16GB of RAM, LR is the only app open at the time and it's showing that I have roughly 6GB of RAM free when attempting this export.
    TL;DR: LR5 worked wiht multiple exports at the same time, but LRCC now chugs after 2 exports are started

    Re: "Selecting video in Messages, now starts Face time for video. Face time is one to one only."
    Apple "Messages" supports two different types of video conferencing. It's become more than a little confusing. If you (or the person on the other end) ONLY have accounts set up for Apple's "iMessage" service (associated with your Apple ID and "iCloud") you may see the video symbol, but when you click on it you will be connected via FaceTime which is limited a 1-to-1 video conference.
    However, if you have set up an AIM account in Messages (you may already have an AIM account ID if you once used iChat for video, audio and screensharing) and the person at the other end also has an AIM account you will be connected via AIM and will be able to do screen sharing and multi-person video conferences just like the old iChat, i.e. you'll have iChat Theater features, up to 4-way conferencing, etc.
    It can get very confusing if, for example, you've signed up for AIM using a .me or .cloud email address. But once you have it set up and learn to recognise the way Messages switches between AIM and iMessage all the old iChat features work just fine in Messages.

  • Run invoke-command on multiple machines at the same time

    Hey all so I read that if I store my New-pssession in a variable then used that in my invoke-command it would run all computers at the same time.
    $a = Get-Content "C:\Users\cody-horton\Desktop\list.txt"
    $session
    for($i=0;$i -lt $a.Length;$i++){
    if(!(Test-Connection -Cn $a[$i] -BufferSize 16 -Count 1 -ea 0 -quiet)){
    Write-Host $a[$i] -foregroundcolor red
    else{
    $session = New-PSSession $a[$i]
    Invoke-Command -Session $session -FilePath "\\My computer\C`$\Users\public\Documents\zip folder.ps1"
    What exactly am I doing wrong I just need to run this script on multiple machines at the same time.
    Thanks.
    Edit: Also what would be the best way to close all the sessions thanks.

    Hi there,
    So what I think you are doing wrong here is that you are overwriting the value in $Session everytime you executed code inside for loop. try the below:
    $a = Get-Content "C:\Users\cody-horton\Desktop\list.txt"
    $session = @() #define this as an array
    for($i=0;$i -lt $a.Length;$i++){
    if(!(Test-Connection -Cn $a[$i] -BufferSize 16 -Count 1 -ea 0 -quiet)){
    Write-Host $a[$i] -foregroundcolor red
    else{
    $session += New-PSSession $a[$i] #add the new session to the array, at the end it will be a collection of sessions
    Invoke-Command -Session $session -FilePath "\\My computer\C`$\Users\public\Documents\zip folder.ps1" #I think the above one won't work..first you need to copy the script locally on the machine and then execute it#Why this won't work because of Second-Hop Authentication
    Have put comments where I edited your code.
    Hope this helps
    Knowledge is Power{Shell}. http://dexterposh.blogspot.com/

Maybe you are looking for