Material master - batch management not consistence with mara-xchpf

Dear Experts:
We have a problem that the user created a new material and only created Basic Data/Accounting/Costing View, inside these views there is no "check field" about "Batch management" but in table both of MARA / MARC the field XCHPF has value 'X' (checked).
in our system, there are 2 material no. has the same situation.
My question is why and how the field "batch management" has been checked and how can we remove it if there is no stocks, no open Doc and no any other transaction??
Thanks a lot.
SAP ECC 6.0

Hi Jürgen L.
Thanks again.
The problem is that we can't change the field "batch management", the material no. we have DOES NOT have Batch No., NO stock, the only docments we have are one PR and one PO, and all of them has the status deleted.
And I had tried to created a new material no. in our QAS, what we did to this new material no. is:
1. Use MM01 to created "Basic data 1" view refer to a "batch management" Material no. - Only Basic data 1 view and click save, nothing else.
2. Use MM01 again to create "General Plant data/Storage 1" view, but the field "Batch Management" is checked and unchangeable, I think this is not reasonable, and I dont know is there any other way I can change "batch management".
thanks.
Last update :
The issue is resolved:
2. Use MM01 again to create "General Plant data/Storage 1" view ,( the field "Batch Management" is checked and unchangeable), save material no.
3. Use MM02 to change "Batch management", now the field "batch management" is changeable.
Thanks you all
Edited by: KMateo on Apr 22, 2010 9:49 AM
Edited by: KMateo on Apr 26, 2010 5:59 AM

Similar Messages

Unable to post return delivery whne the input material is batch managed

Hi,
While clearing the Subcontract GRN where the input material is batch managed, unable to put return delviery and the system throws error and unable to complete quantity posting.
Please guide me.
Regards,
RR Gopalan

This is caused due to some technical restrictions in QM.
When the reverse movement is being posted through QM process, the goods movement is being created in the background and it is being posted without reference to a existing material document. That is the system behaves as if you create a return delivery via MB01. In this case, the system cannot determine the batch number. As the reverse is created in the background and the components are determined internally and the batch cannot be passed over from the QM transaction. To prevent postings and avoid unnecessary inconsistencies in stocks,system will issue the error message.
Workaround:
The message M7389 is configurable. Hence please check in transcation OMCQ and set this as warning message. This would allow you to post the return delivery, But the problem is the batch nubmer would be wrong. So, You can define the corret batch number in the user-ext MBCFC010, it's MM related, You'd better to work with your MM colleagues.
Best Regards,

Same material master in two company codes with batch management

Hi,
There are two company codes in one client. In one batch management is already active. But in another company code batch management is not required. Is it possible to have batch management active in one company code and inactive in another company code where both the co. codes are in the same client? The same material master to be used in both company codes.
Thanks,
Satya.

Hi Satyabarata,
As far as you dont want to move the same materiel i.eStock Transfer with Inter comapy billing scenario then it will be fine.
If you try to Transfer a Batch manged material into a non batch manged CC it will work fine. But on the other hand when do via-versa the system will ask for the Batch information where the Batch management is active.
If you want to use same Material Master for both CC then its not advisable.
Please let me know if you need any other information.
Thx.
MJ

SAP RVBCONVMAT2BM Set Batch Management to materials with stock

Dear Gurus:
We are trying to make mass changes in material master, to activate arround 2,000 materials with batch management flag. We heard about the SAP program release RVBCONVMAT2BM, to let us do it in ma massive action.
Could anyone of you can give me support to get this program?
In other way, the tasks to be done manually will be not succesful because we currently have more than one month of operations in SAP.

Hi Jose,
The report could only be provided by SAP developer after evaluate the specific situation on your system. I think the evaluation process should be very complex and that is why your reported issue has been hold at SAP for such a long time, also only a completed evaluation is done, the SAP developer could provide the report, this is to ensure the data consistency in your system because change the batch management indicator with material stock is a very dangerous bevavior, this could only be done under a strict check. You can't run this report by your own if this is not provided by SAP, because if it cause any serious database inconsistency by running this report without evaluation from SAP developer, then SAP will not responsible for the result and will not help you correct the situation, so I suggest you should better have some pacient and wait for the update from SAP developer, or you may escalate your issue to require a quick process.
Regards,
Rachel

Batch Characteristic not updating with result for linked MIC

Hi,
I have created a MIC and linked to a batch characteristic i.e. potency and included the characteristic in a specific batch class. This MIC is part of the inspection plan for a certain material.
If I generate a lot of origin 01 and 09 for the material and record a result for the MIC and apply a UD, the batch characteristic is not updated with the result recorded in the batch master record..
If I generate a lot origin 89 for the same material, when the result is recorded for the MIC and apply a UD the batch characteristic is updated with the mic value in the batch master record.
Can you help regards?

Ok. I am a little bit further.
I put a trace (ST05) on the result recording and I find a difference between 4.7 and ECC6.0.
In ECC6.0 I've an deletion in table "AUSP". This deletion isn't performed in the 4.7 system.
Hope that this can help to solve my problem.
Regards,
René
@ Mayank
Above, all the master data and customizing is mentioned to transfer the result to the batch classification
Edited by: Rene Fuhner on Jul 30, 2010 7:03 PM

Material Master MRP View not be created till Basiv View is created

Hello All,
I need an information where i would like to know if an MRP view in a Material master can be restricted without the creation of the Basic View. Basically an MRP view is getting created even though the Basic View of material master is not there and it needs to be stopped.
Thanks for your inputs.
Ismail

Dear Syed ,
If you want to prevent end users update other material master views , you can apply the concept of SAP note 545380 - FAQ: Authorizations material master , with this you will not more problem with this kind of problem.
Hope this can help you.
Please let me know if my thinking about your question is correct.
best regards,
Carlos Moçatto

Material Master changes are not allowing (MM02)

Dear All,
we have done year end activities successfully for the 2010 fiscal year. we are following January to December. In 2011 January 9th date we have activated Material ledger. after that when we try to go to material master the system is giving this error.
"Currency was not defined at production startup
Message no. C+040
Diagnosis
You have set the material ledger to productive in valuatione area DEL1. Nevertheless, information about the currency settings at the time of production startup are missing.
System Response
The system cannot ensure data consistency, since it is not possible to compare the current currency settings with those made at production startup.
Procedure
1. Make sure that the currency settings have not been changed since material ledger production startup in valuation area DEL1.
2. Inform your system administrator."
Even when I try to create the new material master it is showing the same error.
Could anybody guide me how to solve this.
Thanks and regards,
Mr.Rao

Hi Mr Rao ,
Your ML currency settings are incorrect .. which is causing the issue..
A . Have you checked the following notes which give a detailed information about Material Ledger activation: 596558 Material ledger production startup 384145 Advice note on material ledger production startup 165844 Material ledger production startup Please, check attached note 596558, which provides recommendations on Material Ledger production startup: ...before ML activation .. i hope not ..
B Always activate the material ledger for a complete company code and copy all currencies from FI. This is the only way to ensure the reconciliation with FI. c) In addition, it is recommended that you activate the material ledger for a complete company code because the invoice verification can neither store invoices that contain materials from plants the material ledgers of which are active nor more materials from plants the material ledger of which is not active. ... Please, consider that only transactions performed after the startup will be taken into account for the actual price calculation.
C .Now to correct it .. you have to deactive ML and correct the currencies and then re-activate ML . Have a look into SAP : Note 53947 - Changing currencies after production startup. Now , are e the actual activities now posted and production is active .. if yes .. the deactivating ML is a pain.
D .If the Material ledger is already set to u201CProductiveu201D, run the report SAPRCKMJX using SE38. This report should only be run in Development or Testing environment. It is not recommended to be used in Production. It may be used in case there is no activity in the plant (no stock, no movements have happened ever). SAP recommends use of their CO-PC development support for this (OSS Note 108374).
Please revert back for any further clarifications
Regards
Sarada

Customer & Material Master data is not saved in SAP 4.7

Hi All,
We created a customer in T code XD01 and saved it. system threw a message that "customer 500001 has been saved" but when I tried to check the customer ID 500001 in XD02 and XD03, it says custoemr 500001 has not been created.
I have checked in table KNA1, KNB1 & KNVV. No data is available in these tables.
Same case with material master data even.
Can anyone please tell me what could be the reason for this problem & how to fix it.
Thanks in advance.
JM

Dear JM,
Goto SNRO- Enter the number range object & click on "Change " icon.
NR Object: DEBITOR
Check whether any value maintained in "No. of numbers in buffer", make it blank & re-create customer.
It may not be exact route cause of the problem, but could be the reason .
Test & update the forum.
Regards,
Reazuddin MD

Material Level batch management

how to configure materila level batch management,
batch number of the material starts with first 3 char of the materil
eg: computer = com001,
sum thing like this
tahnks and regards
madhu

Dear Madhu,
for this you have to use EXIT_SAPLV01Z_001 or EXIT_SAPLV01Z_002. Please see documentation of this exits in SMOD or SE37 for details.
Regards,
Sabine

Material Create Batch Management Mandatory Field

Hi all,
I would like to create material but the batch management fields in several views. Has it relation with, material type or material group or plant? And how can i disable this property for one of our plant ?
Regards,

>
techmaster wrote:
> Hi all,
> I would like to create material but the batch management fields in several views. Has it relation with, material type or material group or plant? And how can i disable this property for one of our plant ?
>
> Regards,
Batch management check once enabled, doesnot need to be enabled again in other view, its automatically enabled as they are all linked together and yes you can disable it for one plant.
In OMSR, look up for field MARC-XCHPF which is for batch management and change the field reference to display and save
Edited by: Afshad Irani on Apr 27, 2010 7:39 PM

Convert non batch managed material to batch managed

What are the prerequisites to convert a non batch managed material to a batch managed one?

Hi
check following link it will help you
[Prerequisites for activating batch management with inventory already in SAP;
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/1b/877e40417c6d1de10000000a1550b0/content.htm]
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/3c/faadb99f6f3c4da80421490e4c91d3/content.htm]
Regards
Kailas Ugale

Batch management not working

Any help will be appreciated. We have all of our inventory parts batch managed, 022, FIFO. However, when we create a delivery from a sales order, the FIFO rule is not being followed. Is this plant specific? If so where can I see it? We do not have this problem with any other plant or division and I believe we have the same set up for all of our plants.
Thank you.
Marianne

I have never seen the batch field flagged by default. Would be nice to let me know how you did it.
However.
In SAP menu Logistics > central functions > batch management > batch determination > batch search strategy .......
there you can setup condition records for batch determination.
If oyu need batch determination for SD, the the transaction to create records is VCH1.

Batch Managed TO creation with refrence to TR

Hi Gurus,
Is there any way to change the quantity and batch in TO when creation the TO from TR using LT04 or any other transaction or the only way is to change the TR using LB02 and then create TO from the corrected TR.
Regards
Albert

WM is a "sub" of inventory managment. so it has to be synchron in the stock and movements.
How did you create your TR? manually in WM? or was it created from an inventory movement executed in inventory managment?
If it was created from an IM movement, then you should not change the batch in a WM TR or TO, otherwise WM and IM would not longer be synchronous.
If it is purely a movement within the WM for which you create TRs, then you can change the batch in the TR with LB02.

Desktop Manager not working with Windows 7 - Error message received Not Responding

Hello
The issue of not connecting with desktop manager started in May 2012. When I plug phone into computer I can see files. USB works fine as I am also able to use all ports with other usb items. I downloaded the latest download manager again today January 14, 2013 and again the desktop manager says non responsive and program will not start. I have windows 7 and the desktop manager did work in April 2012 with this computer (windows 7). Help with a solution would be great.

Hi and Welcome to the Community!
I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Password Manager not working with any internet browsers

I have Thinkvantage password manager installed (v. 3.20.0311.00) on my Thinkpad X201. I am running Windows 7 professional, 64 bit. Password Manager works for all programs except IE8 or Mozilla Firefox (eg. works for Outlook, works for iTunes, etc.). When browsing, the program simply never pops up. It worked previously, and I still have many saved website login details, but it never logs in for me any more and new sites do not activate the program.
I have made sure that the add-on is enabled and I have checked the box next to "enable 3rd party browser extensions" in the advanced tab of internet options. I have also tried resetting internet explorer settings. As mentioned above, this in not only a problem with IE8; it also occurs with Firefox.
Any help would be very much appreciated.
Dr_Rap

Same problem here. I just recieved mine (Win 7 pro 64 bit, X201 Multitouch) last week and password manager not working at all in ANY web browser. It recorded my .net password just fine, but i can't get it to work in IE8. Who pays this kind of money for something that doesnt work?
Fix this Lenovo!

Material master - batch management not consistence with mara-xchpf

Similar Messages

Maybe you are looking for