Material numbers created/changed in last 15 min

Hi ,
If i want to find out how many materials have been created / changed / delete in last 15 minutes How to do that ?
I want all the materail numbers list .

Hello Ramesh,
Hope you have checked mara and all for the fields but there is no field as such to get the time stamp for the material
just take a look at the object BUS1001 this is BUSINESS OBJECT FOR material number you can check for the events fired for with respect to time ...the object in the SWEL tcode just if there is a fuction module with will give you events fired for the Business object within the specified time stamp
(SWELS is tcode for ON/OFF event trace...)

Similar Messages

Material Master create / change screen addition

Hi
I am trying to add purchasing order text screen to material master create / change Z T code. I added purchasing order text for screen sequence group through T code OMT3B. But when I check screen sequnce in TCode OMT3R - Change view of screen order, new screen is not apperaing.
I did similar configuration in sandbox of my system, I am able to add screen in material master create / change t code.
Is there any other settings need to be maintained to add this screen?
Regards,
Nilesh Sankpal

Do the maintenance in OMT3E also.

Automatic Trigger of Idoc Sending to PI on Material Master Create/Change

Hi All,
I would like to ask how to automatically trigger sending of idoc on material master create/change without using a standard transaction like BD10. I already tried using MASTER_IDOC_DISTRIBUTE in the material master change user exit. It does send the idoc but my problem is when an inbound idoc creates a material, it will then pass through the userexit and use MASTER_IDOC_DISTRIBUTE again.
Any suggestions? Or do you have a better solution for this? My requirement is when uer goes throgh MM01/MM02 an idoc will automatically be sent to PI.
Thanks.

First of all a quick comment to your present solution. If it works and your only problem is that you'd like to suppress triggering the IDoc creation when a material is created/updated via inbound IDoc then you might want to just fix that. There's many possible ways to approach this, it all depends how much you want to change and what your processes are (I sorted the listed ones in order of personal preference, though the list is not complete for sure):
<ul style="list-style:circle;">
<li>Export some flag to memory when processing an IDoc that you can import in your exit and thus recognize that you don't want to send an IDoc. Depending on how you are processing your inbound IDoc BAdI BADI_MATMAS_ALE_IN might work; you might find others if this is not applicable or sufficient. If you're working on ECC 6.0 you could also consider coding the export of the flag in an implicit enhancement spot in your function modules used for IDoc processing.</li>
<li>Evaluate in your existing coding the transaction code SY-TCODE; most likely you should see a clear difference between your IDoc processing and the other updates where you want to trigger the IDoc.</li>
<li>Most likely the IDoc processing triggers function module MATERIAL_MAINTAIN_DARK (e.g. MATERIAL_INPUT_MATMAS01 does); this function module uses a global variable FLAG_BAPI_CALL to indicate the non-dialog processing. So if you feel adventurous you could evaluate this flag in your coding.</li>
</ul>
Change pointer won't really do you any good if your functionality is already working without them apart from the trigger. Even if you write change pointers, you still have to implement the trigger functionality, so essentially back to square one...
In general another good option is often to use workflow events that are already triggered. I.e. in your case business object BUS1001006 almost does the trick. It has events for <em>ViewCreated</em> and <em>Created</em>, but unfortunately lacks events for material updates (and I didn't see any other appropriate object that has it and a quick trace while updating a material didn't fire any appropriate event).
Cheers, harald

Material Created/changed in ECC needs to be updated in thirdparty system

Hi Gurus,
I have a requirement. Please help me on this.
We are having a legacy system (Material Master)which needs to be replaced by ECC 6.0 and data needs to be sent to third party system via middleware as PI.
we also needs to extend message type(Matmas not sure which one we need to consider 01,02,03,04) with additional legacy 10 fields according to the client requirement.
Whenever a material is created/changed in ECC idoc needs to be sent to middleware and then to the thirdparty via middleware.
Please let me know how we can handle this interface. Thanks much.
Regards,
Sanjay

HI Janagar,
I understand you are saying the solution in one word. It would be really helpful if you can expedite the solution as i am handling interfaces for the first time. Thanks much.
Regards,
Sanjeev

IDOC Type for Tcode CC01 and CC02 (Create / Change Change Numbers)

We are trying to integrate Change Master from a 3rd party system to SAP R/3 4.72.What is the IDOC Type for Tcode CC01 and CC02 (Create / Change Change Numbers)

Thanks...
We have looked at this IDOC Type. However we are not very sure how the components (Material/BOM etc.) will be mapped into E1AEEFM segment in the IDOC.

To create/change material determination records using VB11/VB12 transaction

To create/change material determination records using VB11/VB12 transactions, do you know any relevant FM's or BAPI's for these transactions instead BDC?
Thanks in advance.
regards,
vamshi

Thanks for the response. I wrote the BDC.
Have some problems in BDC for VB12.Uploading ten thousand records at a time.
Following problems exist.
Before updating i am reading existing data.
In selection condition, if i give ten thousand records
i am getting dump.
(ii) In the change material determination third screen
to delimit the date ( Valid on and Valid to) it does for header not at item level. No option to do at item level.
thanks,
vamshi

I have the Numbers-applications on both Mac mini and Macbook Air. My problem is that they don't sync so when I create a Numbers-file on the MacBook while travelling, it will not be on my Mac mini when I get home :(((

I have the Numbers-applications on both Mac mini and Macbook Air. My problem is that they don't sync so when I create a Numbers-file on the MacBook while travelling, it will not be on my Mac mini when I get home :(((

Hey iWeb plubishing problems,
I would first check to make sure that you meet the system requirements for OS X to support Documents in the Cloud. For that your Mac’s needs to be running at least OS X Lion 10.7.5 or later to make sure that everything syncs. Take a look at the article below for more information.
iCloud: Troubleshooting Documents in the Cloud
http://support.apple.com/en-us/HT203517
Take care,
-Norm G.

Create/Change/Delete for material

Hi Experts.
I have to create an application is which i have to create new material, change existing SAP materials & delete sap existing materials.
I am not sure which approach is good:-
1. 1 view for create / change / delete
2. saperate view for create change & delete.
If i go with the first case how do to perform it (how to use create view as change & delete view) I created a view for create materials. For change & delete i created a search view which gives a list of SAP existing materials based on selection criteria. Now how to pass selected materials data to the create view so that i can see it in edit mode (in Create view) if user presses change. or how to display the selected material data in display mode (in create view) for deletion.
If i go with the 2nd option then also how to pass Selected material from the search to change & delete view.
Not sure where do i have to create context methods etc for such functionalities.
Regards,
Nik

hi
Can you tell me how can i display SAP existing materials data if i use only 1 create view
which is used to create materials. At initial its haveing input fields.
Now i want to see data in create view for the seleted material.
do u mean , u have the records in ur data base table and u want ur records to be listed down in a drop down , in ur create view
if so , u can use dropdown by index ..
if u wish to use drop down by index , thn proceed like this :
1 declare a context node of cardinality 0..n
2 declare attribute of type string under it . The attribute name should be exactly the same as that in database table '
eg if u want to poulate values for a field ' SYS' from table , than giv the attribute name as 'SYS' in context attribute
3 declare internal table of type standard table
4 populate internal table with values
5 take the refernce of the node , u have created
6 bind it with the internal table
the dropdown by index wud nw contain app values
Re: dropdown in WDA
cn u pls explain more about ur requirement ?
Edited by: amit saini on Oct 14, 2009 12:29 PM

How to use PowerShell to find files created in the last 15 min and bigger than 5 KB

Hi!
I am trying to write to a text file, the files created in the last 15 min and bigger than 5KB
I have created this PowerShell script but it's not working. Can somebody help me with this?
$Notprocessedfiles = Get-ChildItem c:\test | where {$_.Lastwritetime -gt (date).addminutes(-15)}
if ($Notprocessedfiles.lenght -gt 3KB)
$Notprocessedfiles | Out-file c:\test\maybe.txt
Thanks!

Do it the PowerShell way. It is easier and faster.
Get-ChildItem c:\test |
      Where-Object{$_.Creationtime -gt (date).addMinutes(-15) -AND $_.Length -gt 5Kb} |
      Format-Table -Auto |
      Out-String |
      Out-file c:\test\maybe.txt
¯\_(ツ)_/¯

Lexicographic flag setup and material number range change

Hi gurus,
got the following situation:
AS IS:
Tcode MMNR: Number range for material master part number: AAAAAAAAAAAAAAAAAA to ZZZZZZZZZZZZZZZZZZ (lenght 18, external assignment)
Tcode OMSL: Lexicographic flag IS NOT setup
Tcode OMS2: For all material types flag "External no. assignment w/o check" IS SETUP
Basically we can't create numeric only part numbers.
The new requirement is to be able to create numeric part numbers like:
1234
12345
0123
01234 (where the leading zero is a significant character for the part number)
By doing the following changes:
MMNR: change number range 000000000000000000 to ZZZZZZZZZZZZZZZZZZ
OMSL: setup lexicographic AND leading zeros flag
OMS2: clear flag for External no. assignment w/o check
I see I do achieve the result: numeric part numbers can be created, leading zeros are managed in the correct way and all numeric part numbers are LEFT-aligned, so looking to MARA you would see part numbers like this:
00012345
012345
012345V
09CATALIST1
0AFVAU0001
12345
23225V
23243V
2SIMBACK3210
I did already tried all the above changes in the quality system, then created a numeric part number and an alfanumeric part number, for both of them did create a PO, Inbound delivery, posted MIGO, created a sales order, outbound delivery, PGIed without any issue, stock was displayed and managed correctly by the system, same for material docs.
We already thought about BW, so in case we do the changes BW would be ok.
Apparently everything is fine so I should go for the production system BUT........ in my mind I'm thinking that OMSL Tcode is usually setup day 1 of an Sap project and then usually you forget it... I have the fear that even if everything looks fine (and Sap allows me to change the customizing), I'm going to muck up the system...
Have you ever had the same to do ? I already saw posts similar to this one but already existing conditions were different so to me this case looks like unique so far..
Any help, suggestion, whatever will be highly appreciated, especially cause I have to take a decision by tomorrow morning
Many thanks in advance !!
Enrico
Edited by: Matt on Aug 13, 2011 7:39 AM - profanity removed

As you never had numeric numbers, it should not create a big problem.
I am working in a system with lexicographical setting in use.
But you have to keep in mind that your sort sequence is quite different to numeric numbers, like this:
1
10
11
12
2
3
31
311123
32
32012
4
And you may get the one or other issue if you download material numbers to Excel, with wrong settings you will loose your leading zeros.
A similar effect happens most of the time if user not very familiar with Excel give you a file for an upload, as this often is prepared without leading zeros, which could cause a load to the wrong material if the remaining number would be a duplicate:
0123 and 123
Of course is a selection by number range not that easy as it is with numeric numbers. Usingthe first example a range from 1 to 3 includes materials 10, 11 and 12 as well

What is Indicator for lexicographical material numbers in OSMSL

Dear pandits,
I am making MIGO for say material 600000114 when trying to save the MIGO afer doing J1IEX system says ( thro external purchase order type)
Price for Material 0000000006 in Plant 1100 for SP_IND Not found
where i could have gone wrong?
thanks
v balajee

did someone change the lexicographical indicator? (how? I think it is gray once you have already materials created)
please read OSS Note 144672 - Lexicographical material number: leading zeros
and
545430 FAQ: Problems with material numbers
and
Note 72286 - Lexicographical <-> non-lexicographical material no.OSS Note 144672 - Lexicographical material number: leading zeros

Create/ Change BOM

Hi,
I want to create BOM for several (thousands) of materials. These BOM's consist of the same components. Is there a way to link a "components list" to all the materials so that I can avoid to create a BOM for each and every material? Or maby create 1 BOM and link this to the rest of the material numbers?
Thank You,
NM

Hi Nicsherda,
BOM has to be created for every material which is an assembly. The simplest thing which i would recommend is to create a dummy material with phantom assembly defination and create a BOM for this material with the components list you wanted.
Now you create BOM for all the materials using LSMW/BDC and assign only this dummy dummy phantom assembly component to it.
This way if any changes are required in the BOM you need not change the BOM for the several thousand materials, instead need to change only for the dummy phantom assemble material.
Hope this would certainly help....
Regards,
Prasobh
Please reward your points if this was useful/solved

Material numbering

Client requirement is to go for a material no. change for the finish products ( external no. range) and want to have unique numbering. At present external no. range is given as they like. So existing material no.s will be replaced by new material number. I need some inputs how to go about on this from PP, MM, SD and FI/CO point of view.
Thanks,
Prasad

Hi Raghavendra,
If the client wants to switch off from old material numbering and wants to switch on to new material numbering, involves lot of efforts.
From every module, no open documents should exist in the system.
You have to create new materials and you have to transfer everything from old material numbers to new material numbers.
Periods, stock balances etc has to be taken care.
For the new materials, there will no past data in the system. They altogether new materials.
Then you have to delete the old material numbers and to do archiving.
This process is just like a small impl. project as it involves data collection, uploading, creating masters etc.
Hope this clarifies.
Thanks,
Viswanath

Report for Material Numbers configured in KMAT Sales Order

Hi,
Scenario:
We are operating with KMAT material type. (e.g. ABC)
Material "ABC" has Characterstic Char 1 , Char2, Char3, Char 4
Each Char has Char values.
Sales Persons create the Sales orders by selecting approprite Char & Char Values. Via MRP, this lead to requirement generation for materials associated to the respective Char & Char Values.
Requirement:
For a given list of sales order numbers for the KMAT material (ABC),
I want to get the list of Material numbers associated to the Char & Char Values configured in these S.Os.
Thanks
Nitin

For the Function Modules, you would need to go to Transaction SE37. For CS_BOM_EXPLOSION I use the following Paramater Values, aukmng = 1, auskz = X, capid = PP01, CUOBJ = from the VBAP Table and line Item of the Sales Document VBAP-cuobj, datuv = current date, emeng = 1, mktls = X, mtnrv = VBAP-matnr, stpst = 0, svwvo = X, werks = VBAP-werks, vbeln = VBAP-vbeln, vbpos = VBAK-posnr, vrsvo = X.
For the Function Module VC_I_GET_CONFIGURATION use the following Parameter Value, instance = VBAP-cuobj.

How do I change my iPad mini's SIM PIN when I cannot remember what the original PIN was?

I went to enter a new PIN so I could lock my iPad's SIM card and was asked to enter a number. At some point, I must have entered a number already, because I got a message that I had entered the wrong one. I can't seem to choose the "change PIN" option, probably because I can't recall the original one. How to I change the SIM PIN? What happens if I use up all my chances at entering the PIN and don't hit on the correct one?

Thank you for the reply.
I have one chance left to enter a number and then I will be locked out of
4G service. So, I have not tried 1111. What will that number do?
When I log into MyVerizon, it does not offer "view all" as an option under
My Device. Instead, under My Device it only offers the following:
My Device
Apple
iPad mini with Retina display 32GB Space Gray
Other Options:
Accessories
Change Your Prepaid Device
Device Support
FAQ
My Plan
300MB for $5 Daily Plan
View Plan Details
Other Options:
Add Data or Change Plan
Disconnection of Service
View Plan Options
There is no place I can find that provides with a PIN or PUK. I have tried
clicking on all the options listed above.
Verizon Wireless Customer Support
created the discussion
"How do I change my iPad mini 2's SIM PIN when I can't remember what it
is?"
To view the discussion, visit:
https://community.verizonwireless.com/message/1070177#1070177
>

Material numbers created/changed in last 15 min

Similar Messages

Maybe you are looking for