Matrix-Report - Layout-Problem

Hi,
In my report (matrix-rep.) is number of column larger than side-width.
Report continue printing on the next page, but I want, the report should print this on the same page bellow
How can I do this?
Thanks
Gregor

Title of this Forum: Forms
Title of this Thread: Issue with Report Layout
I can't point my finger on it, but something feels wrong. Or is it just me ;) ?
Reports has its own forum dedicated to questions related to...reports:
Reports
You have a good chance that you get more answers over there. Also you did not mention any version numbers (reports version, database version,...) so please add these informations over there as well as the solution to your problem may depend on the version of the product you are using.
good luck!
cheers

Similar Messages

  • Report layout problem

    i am facing very strange problem,
    some times in report layout the field ,frame etc movement not exactely accoring to the
    cursor movement(this happend only in some reports others work properly),
    due to this ,layout designing is difficult
    bye
    siddharth

    Hi,
    Please try with latest Report Ver 6.0.8.19.0. you will not face the problem.
    Thanks,
    Puvan.

  • Matrix Report Query Problem

    Dear members
    I am using reports 6 and oracle 9i. I am trying to create a matrix report in which i want to show products as rows and dates as columns. Dates should be fixed 7 days any from to dates given by user. I have used two tables prd_plan_m and product_code. I want to show plan_no and plan_qty based on product_code and date. I want to show all the products as rows whether it has plan or not and 7 days columns shows as heading weather in this there is any plan or not.
    For this reason i have made this query.
    SELECT ALL p.code,pkg_prod.get_prod_name(p.code)prod_name,pkg_prod.get_prod_qty(p.code)prod_qty,P.PLAN_ID, P.PLAN_DESC, a.dates,
    P.PLAN_QTY, P.UNIT_ID, P.REMARKS
    FROM PRD_PLAN_M P ,(select rownum - 1 + to_date('20-jul-08', 'dd-mon-rrrr') dates
    from all_objects
    where rownum < to_date('26-jul-08', 'dd-mon-rrrr') -
    to_date('20-jul-08', 'dd-mon-rrrr') + 2)a
    where P.PLAN_DATE(+) = A.DATES
    UNION
    SELECT E.P_CODE,E.PROD_NAME,E.PROD_QTY,null,null,null,null,null,null FROM PROD_CODE E
    But this query shows duplicates rows. suppose one product_code in prd_plan_m has plan_qty shows one row and the row from product_code table also show the same row which have no plan qty.
    Help me in this regard.
    I will be very thankful to you .
    thanks and regards

    Thanks for reply. But this query is also produce the same results see bellow output.
    CODE     PROD_NAME     PROD_QTY     PLAN_ID     PLAN_DESC     DATES     PLAN_QTY UNIT_ID     REMARKS
    0101     MOUNTAIN DEW     225 ML NR               
    0201     PEPSI MAX     240 ML          
    0301     PEPSI          250 ML          P0001L01 TEST PLANE-01     7/21/2008 20000 1          test
    0301     PEPSI          250 ML
    0302     MOUNTAIN DEW     250 ML          P0005L02 NEW ENTRY     7/26/2008 20000          TEST
    0302     MOUNTAIN DEW     250 ML
    Code 0301 and 0302 are repeated. But they should be shown only once. Please help me to resolve this problem.
    thanks & regards

  • Asset report layout problem (S_ALR_87015066, S_ALR_87015065 )

    Hi SAP Gurus,
    I have a problem with Standard Asset reports S_ALR_87015066, S_ALR_87015065 in saving the layout. I need to save a layout and executed at all times to the user.
    Please let me know is there any config settings to do this.
    Thanks in Advance...
    Best Regards,
    Chandra.

    Hi
    I got the solution and found this configuration in SPRO.
    SPRO>IMG>Project systems>Information systems> technical report projects --> define profiles in displayed fields.
    Add the desired fields from the pop up and transport it.
    In IMG, WBS elements overview, in the pop up some of the fields are not displayed such as created by,capital code and RISK.
    But it is displayed in the PS-wbs element overview (s_alr_87015066) report pop up( try to add after executing report).
    Does anyone faced similar situation or any one have thoughts on this.
    Thanks in Advance..
    Best Regards,
    Chandra.

  • Financial report layout problem

    Hi ALL,
    I have a financial report definition, which has 5 levels. Every level I have to show a total row, which is constructed by former total rows
    plus some new rows. I tried to use new Pivot functionality to construct this report ,
    but the problem is that in one column you cannot delete total rows selectively from the table, so you will have total rows for the single new rows also. This causes that you will have too much total rows, duplicate total rows at the highest levels.
    There is an example in the document "oracle-bi-ee-new-features-10gr3.pdf" about financial layout. It shows a correct Pivot report, it looks fine. But I cannot reconstruct this report.
    Can you tell me how they could delete in this example duplicated "Total Fixed Assets" and duplicated "Total Investments" rows which must have been there before?
    Thank you,

    I don't think so, but you could just put the dimension inside of the report, merely for the purpose of the end-user being able to see the actual dimension name.
    Thanks,
    James

  • SAP 8.8 Crystal Report Layout problem in client workstation

    Hi Experts,
    We have import crystal report to SAP Business One as Form Layout or AP Invoice. We have already created the token DocKey@ so it would automatically be printed and will not ask for the document number. The layout works fine using the server workstation but in the client workstation we cannot proceed with the printing because when we click on the preview button, a login window appears with this details:
    Database Login
    Server Name : gray out or not active
    Database: gray out or not active
    Login ID: active
    Password: active
    We tried to enter the SQL login but fails.
    Is there any components that we need to install in the workstation before it could function the same way as PLD?
    Thanks,
    Janice

    You can try creating the ODBC connection, which is the same as on the server.
    Assuming this is the scenario:
    1. You write the invoice using crystal report on the server
    2. On the server, Control Panel--> ODBC, you have created an ODBC link eg; SAPB1.
    3. The report is connecting to ODBC link and pointing to database OECUS
    On the client workstation, you need to create:
    1. Control Panel--> ODBC, you need to create an ODBC link as on the server.

  • Report Layout Problems

    Hi
    I've got a report that I can never get it to print properly in A4.
    The report is an A4 letter. The last line of text cannot be printed at the bottom of the page. As long as I move it down a little bit at design time, when run it the line of text jumps to the next page.
    My other problem is that a report printing in LANDSCAPE, that I can never utilize the entire space on the page. It prints only about 70% of a page, wasting 30% space on the right.
    Can anyone help please?
    BTW, I am using Reports 10g (9.0.4).
    TIA
    Hien

    To view the paper size, click on a section (Header/Main/Margin) in the Object Navigator, and view the Width and Height in the Property Inspector.
    To view the size of the margin, go to the Report Editor, and click on the Edit Margin button.

  • Report layout problem when executing in Background

    Hi,
    I am executing one custom report in background with layout 'Z_65_400' . After execution, the report is generating spool number .
    But when I trying to see the output from the spool, here layout is coming differntly and with name 'X_65_255'.
    These are the latest packs in my system .
    SAP_BASIS     620     0064     SAPKB62064     SAP Basis Component
    SAP_ABA     620     0064     SAPKA62064     Cross-Application Component
    SAP_APPL     470     0030     SAPKH47030     Logistics and Accounting
    Could you please give the solution ASAP.
    Thanks and Regards
    NTR

    Hi
       Check you setting in SPAD Where is assign to the printer make Sure .
    Regards
    Nilesh

  • Report Layout Problems - point over a letter - subscript words

    Hi,
    is there a possibility to get a point over a letter in the report mode?
    i need that as a description for a heat flow Q. but it didn't found a way to get that point over the Q. is there an easy way to get that?
    another problem is that i need to subscript letters. in the curve and axis description i get that with "Q^tSp^n_KM" but if i insert an Textfield it won't work in the textfield. can you tell me how i get that in textfields?
    Regards Normann

    Hi Normann,
    maybe the following workaround will help you, too: I have once had a request for ancient chemical symbols to be inserted into a DIAdem report programmatically. The solution was to use a true-type font (.TTF) with the necessary symbols. The symbols were represented through the regular letters, like an "O" for oxygen, "S" for sulphur, ..., which could easily be typed.
    With a TTF editor (e.g. FontForge is freeware), you could create the dotted Q (dQdt) or the subscripted quantities as new letters and use these in REPORT.
    Best regards,
    Sebastian

  • Crystal reports - layout problem

    Hi
    I imported one a the layouts in the .b1p package file (sales quotation) and proceeded to edit the layout according to the customer's requirements. Everything went well until I tried adding the OITM table (not included in the available tables in the report) via the database expert. When you add the table it has a myriad of links and the layout does not work anymore. Even if you delete all the links, and only link it to QUT1 on ItemCode, it still doesn't work. Even if you remove the table the layout remain defective.
    I then have to delete the report in the Report and Layout manager and re-import my saved version.
    Even just opening the database expert and closing it without doing anything, I get this message "More than one datasource or a stored procedure has been used in this report. Please make sure that no sql expression is added and no server-side group by is performed".
    Any ideas please?
    Regards
    Danie

    In the layout designer under either report options or options (under file menu) there is a "Use Smart linking" . Turn this off as this is why the links create themselves. It will link all your tables incorrectly.
    Once you have the option turned off, then add your new table & make the joins yourself.

  • Reports layout Problem

    We developed some reports in Oracle reports 2.5 and our
    operating system was Windows 98. Now we got the windows 2000. We
    installed the Reports 2.5 and reports 6i.
    Now when we opened the reports in reports 2.5, in the layout we
    say funny symbols, we fixed that by choosing the fonts, but
    still we can not see the frames and repeating frame boarders.
    I hope someone will be able to give some suggestions about it.

    hello,
    fact is, that reports 2.5 is was NOT supported with windows2000.
    so if you need to migrate to windows 2000 you will need to
    migrate to another version of reports as well. reports 6i
    release 2 is the first officially supported version with
    windows200 you might check if a current patchset of developer
    1.6.1 ( if that's the source of your reports 2.5) might solves
    the windows2000 support level.
    regards,
    the oracle reports team --pw                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Issue with Report Layout

    Hi All,
    I am working on a report which display employee present or absent in the month. I have to display dynamic column as days varies as per month .
    I am done with the report design/query part, using matrix report layout. Report executes and produce expected output too.
    Problem:
    As this report consists maximum 33 columns (1 = employ name + 31=days in the month + 1=Total days present) I change Page Layout to Landscape.
    When I select report output as "pdf" it generates report in Portrait Layout.
    Could you please tell me how to fix this issue?
    regards,
    RSD

    Title of this Forum: Forms
    Title of this Thread: Issue with Report Layout
    I can't point my finger on it, but something feels wrong. Or is it just me ;) ?
    Reports has its own forum dedicated to questions related to...reports:
    Reports
    You have a good chance that you get more answers over there. Also you did not mention any version numbers (reports version, database version,...) so please add these informations over there as well as the solution to your problem may depend on the version of the product you are using.
    good luck!
    cheers

  • Scramble layout when split a large matrix report in separate PDF page

    Dear All,
    I have large matrix report, and set the destype=cache, desformat=PDF, width=11, height=8.5 (at Main Section property).
    This report running well and resulted PDF file.
    But the problem is in the layout, i got a scramble layout and sometimes there are empty boxes.
    I thinks, this cause of the matrix size exceed the size of section (width & height at Main Section property).
    Anyone have solution for this?
    Thanks before..............

    Must admit that I never saved as txt
    Looks like a bug to me. What is the version of reports?
    Marcos

  • How to create Matrix with Group report layout in xml

    Hi,
    i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
    Here i am attaching the required design doc
    below is the code
    select COST_CMPNTCLS_CODE,
    -- crd.RESOURCES,
    NOMINAL_COST,
    cmm.COST_MTHD_CODE,
    -- crd.COST_TYPE_ID,
    gps.period_code
    -- ORGANIZATION_ID
    from CM_RSRC_DTL crd,
    gmf_period_statuses gps,
    CM_MTHD_MST cmm,
    CR_RSRC_MST crm,
    CM_CMPT_MST ccm
    where gps.period_id = crd.PERIOD_ID
    and crd.cost_type_id = cmm.cost_type_id
    and crd.RESOURCES = crm.RESOURCES
    and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
    and gps.period_code in (:p_period1, :p_period2, :p_period3)
    group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
    order by 1,2,3,4.
    The o/p of the report shoud be as given below
              Period-1     Period-2     Period-3     Period-4
    COMPONENT                         
    LABOUR - DIRECT                         
         Actual     1     2     3     4
         Actual Rate     10     10     10     10
         Standard Rate                    
         Var%                    
    DEPRICIATION-DIRECT                         
         Actual                    
         Actual Rate                    
         Standard Rate                    
         Var%                    
    OVERHEAD - DIRECT                         
         Actual                    
         Actual Rate                    
         Standard Rate                    
         Var%                    
    LABOUR - IN DIRECT                         
         Actual                    
         Actual Rate                    
         Standard Rate                    
         Var%                    
    Thanks in advance

    Your friend is obviously not a reliable source of HTML
    information.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Mr.Ghost" <[email protected]> wrote in
    message
    news:f060vi$npp$[email protected]..
    > One of my friends advised me to develop my whole site on
    the layout mode
    > as its
    > better than the standard as he says
    > but I couldnot make an ordinary table with rows and
    columns in th layout
    > mode
    > is there any one who can tell me how to?
    > thanx alot
    >

  • Group Matrix Report Problem

    when i build a group matrix report ,i only able to get the summary totals of columns (in the cross product ) at group level,but fail to get the summary totals of columns (in the cross product) at report level.So please tell me , how can i achieve this one?

    Dear Waheed....I think u just have to set property of summary column
    'Reset at = Report'
    I this does'nt work then u should explain ur problem.
    Kashif

Maybe you are looking for