Maven parameter
Hello All:
I am working on a project in which it uses maven 2.0 as the build tool. From its document, there is a maven command line:
mvn -P XXX eclipse:eclipse
in which the XXX is the name of a module. I learned from maven's doc that eclipse:eclipse indicates that maven will generate the .project so that an eclipse user can import the module into eclipse env as a project.
What I don't know is the parameter -P and its following module name. What's it? It seems I can't find the answer from the maven site.
I am new to maven so pls help!
Thanks,
Sway
Try it here:
http://maven.apache.org/users/getting-help.html
Similar Messages
-
12c SOA composite deployment issue using maven
I am facing issue with 12c SOA composite deployment using maven. I execute the below command for deploying any composite. (Note: Update and run init.cmd file before running the below maven command)
mvn pre-integration-test –f soa-pom.xml –Dcomposite.name=TestSOAProj –Dcomposite.version=1.1
Issues:
As seen above, I specified composite version to be deployed as 1.1 in pom.xml file, but maven deploys the composite with version that is present in composite.xml. It does build the jar file with the version specified in the pom i.e. TestSOAProj_rev1.1.jar, but when it deploys I see the composite with version as 1.0 (this version is in composite.xml). The out of the box maven script is not overwriting the revision in the composite.xml with the value specified in the pom file.
Also, is there a way to pass the partition name as an user input parameter in the pom file. I tried this with the out of the box pom file by giving the partition name as something other than ‘default’, but the maven script ignores this and always deploys to ‘default’.
I am not sure if I am missing anything here. Please suggest.
inti.cmd:
SET JAVA_HOME=D:\12c-Installation-Path\Java\jdk1.7.0_60
SET ANT_HOME=D:\12c-Installation-Path\Oracle\Middleware\Oracle_Home\oracle_common\modules\org.apache.ant_1.9.2
SET M2_HOME=D:\12c-Installation-Path\Oracle\Middleware\Oracle_Home\oracle_common\modules\org.apache.maven_3.0.5
SET PATH=%PATH%;%JAVA_HOME%\bin;%M2_HOME%\bin;%ANT_HOME%\bin
soa-pom.xml:
<?xml version="1.0" encoding="UTF-8"?>
<project xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd" xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<!--
This POM was automatically generated during SOA project creation.
This POM relates to this SOA Composite, i.e. the one in this same directory.
There is another POM in the SOA Application directory which handles
the whole SOA Application, which may contain additional projects.
-->
<modelVersion>4.0.0</modelVersion>
<groupId>TestSOAApp</groupId>
<artifactId>${composite.name}</artifactId>
<version>${composite.version}</version>
<packaging>sar</packaging>
<!--
The parent points to the common SOA parent POM. That is a special POM that is
shipped by Oracle as a point of customization (only). You can add default values
for properties like serverUrl, etc. to the SOA common parent POM, so that you
do not have to specify them over and over in every project POM.
-->
<!--<parent>
<groupId>com.oracle.soa</groupId>
<artifactId>sar-common</artifactId>
<version>12.1.3-0-0</version>
</parent>-->
<properties>
<!-- These parameters are used by the compile goal -->
<code.basedir>${soa.app.source}/${project.artifactId}</code.basedir>
<scac.input.dir>${code.basedir}/SOA</scac.input.dir>
<scac.output.dir>${project.basedir}/target</scac.output.dir>
<scac.input>${scac.input.dir}/composite.xml</scac.input>
<scac.output>${scac.output.dir}/out.xml</scac.output>
<scac.error>${scac.output.dir}/error.txt</scac.error>
<scac.displayLevel>1</scac.displayLevel>
<!-- if you are using a config plan, uncomment the following line and update to point
to your config plan -->
<configplan>${code.basedir}/${project.artifactId}_cfgplan.xml</configplan>
<!-- These parameters are used by the deploy and undeploy goals -->
<composite.name>${project.artifactId}</composite.name>
<composite.revision>${project.version}</composite.revision>
<composite.partition>default</composite.partition>
<serverUrl>http://${target.hostname}:${target.port}</serverUrl>
<!--user>weblogic</user>
<password>${pwd}</password-->
<overwrite>true</overwrite>
<forceDefault>true</forceDefault>
<regenerateRulebase>false</regenerateRulebase>
<keepInstancesOnRedeploy>false</keepInstancesOnRedeploy>
<!--<jndi.properties.input>UNDEFINED</jndi.properties.input>-->
<scatest.result>${scac.output.dir}/testResult</scatest.result>
<!-- input is the name of the composite to run test suties against -->
<input>${project.artifactId}</input>
<!--<scac.ant.buildfile>${env.MW_HOME}/soa/bin/ant-sca-compile.xml</scac.ant.buildfile>
<sca.ant.testfile>${env.MW_HOME}/soa/bin/ant-sca-test.xml</sca.ant.testfile>
-->
</properties>
<build>
<plugins>
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>properties-maven-plugin</artifactId>
<version>1.0-alpha-2</version>
<executions>
<execution>
<phase>initialize</phase>
<goals>
<goal>read-project-properties</goal>
</goals>
<configuration>
<files>
<file>build-${env}.properties</file>
</files>
</configuration>
</execution>
</executions>
</plugin>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-antrun-plugin</artifactId>
<version>1.6</version>
<executions>
<execution>
<id>read-input</id>
<phase>prepare-package</phase>
<inherited>false</inherited>
<goals>
<goal>run</goal>
</goals>
<configuration>
<target>
<property name="fmw.app.basedir" value="${soa.app.source}" />
<property name="fmw.composite.name" value="${project.artifactId}" />
<property name="configplan.target.path" value="${scac.output.dir}" />
<ant antfile="${project.basedir}/replace-tokens.xml" target="replaceConfig" />
</target>
</configuration>
</execution>
</executions>
</plugin>
<plugin>
<groupId>com.oracle.soa.plugin</groupId>
<artifactId>oracle-soa-plugin</artifactId>
<version>12.1.3-0-0</version>
<configuration>
<compositeName>${project.artifactId}</compositeName>
<composite>${scac.input}</composite>
<sarLocation>${scac.output.dir}/sca_${project.artifactId}_rev${composite.revision}.jar</sarLocation>
<serverUrl>${serverUrl}</serverUrl>
<user>{}</user>
<password>{}</password>
<!-- Note: compositeRevision is needed to package, revision is needed to undeploy -->
<compositeRevision>${composite.revision}</compositeRevision>
<revision>${composite.revision}</revision>
<scacInputDir>${scac.input.dir}</scacInputDir>
<input>${input}</input>
<!--<appHome>${soa.app.source}</appHome>
<oracleHome>${oracle.home}/soa</oracleHome>
<configplan>${scac.output.dir}/${project.artifactId}_cfgplan_generated.xml</configplan>-->
</configuration>
<!-- extensions=true is needed to use the custom sar packaging type -->
<extensions>true</extensions>
</plugin>
</plugins>
</build>
</project>
replace-tokens.xml:
<?xml version="1.0" encoding="UTF-8" ?>
<project name="EA_SOA_Build" default="replaceConfig">
<target name="replaceConfig">
<echo>Replacing tokens in configuration file</echo>
<!-- Following logic copies the dev deployment plan and generates one to meet the target environment. -->
<delete failonerror="true" file="${fmw.app.basedir}/${fmw.composite.name}/${fmw.composite.name}_cfgplan_generated.xml"/>
<copy overwrite="true" failonerror="true"
file ="${fmw.app.basedir}/${fmw.composite.name}/${fmw.composite.name}_cfgplan.xml"
tofile="${configplan.target.path}/${fmw.composite.name}_cfgplan_generated.xml"/>
<replace file="${configplan.target.path}/${fmw.composite.name}_cfgplan_generated.xml">
<!-- replace filter for soa source and target endpoints. -->
<replacefilter token="dmnh1i.manheim.com" value="dmnh2i.manheim.com" />
</replace>
</target>
</project>
build-local.properties:
soa.app.source=D:/Oracle_SOA12c13/Jdev_mywork/OVCApp
mds.outer.dir=D:/Oracle_SOA12c13/Jdev_mywork/OVCApp/MDS
target.hostname=localhost
target.port=7001
oracle.home=D:/Oracle_SOA12c13/Middleware/Oracle_Homehi,
Can i pass multiple composite name like
mvn pre-integration-test –f soa-pom.xml –Dcomposite.name=TestSOAProj –Dcomposite.name2="xxx"
can you please suggest me for same.
Hint- passing project1,project2..... -
Database creation using ant/maven/liqubase
Dear ALL:
I am creating the database instance using the ant/maven scripts and following are the things I tried but some how it is not creating the database.
I have installed the 64bit oracle 11gR2 on windows 7 and configured the default database (ORCL). after installation I opened up the command prompt and tried sqlplus and it get connected and I can see the tables. However when I tries to do it using the build script it fails. Following are few things I tried out.
I plan to created 'orcl as the database with sid=orclusing the ant command 'ant -Denv=dev clean create-db -d' but it failed saying orcl is already running and you need to shut down it and I think it is expected because I am creating the database named orcl which is already created. Then I changed database name to dms and sid=dms then it throws error that you cant connect to the server with following error.
SQL*Plus: Release 11.2.0.1.0 Production on Wed Jan 12 16:17:11 2011
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
SP2-0640: Not connected
ORA-12560: TNS:protocol adapter error
more information about listener: the output of - lsnrctl stat
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 12-JAN-2011 16:18:04
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date 12-JAN-2011 16:16:51
Uptime 0 days 0 hr. 1 min. 13 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\santosh\product\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File c:\oracle\santosh\diag\tnslsnr\unknown\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 2 handler(s) for this service...
Service "qc_dms" has 1 instance(s).
Instance "qcdms", status READY, has 1 handler(s) for this service...
Service "qcdmsXDB" has 1 instance(s).
Instance "qcdms", status READY, has 1 handler(s) for this service...
The command completed successfully
Can someone help me out ? how ever the same thing is working fine on the oracle virtual box running on ubuntu 10.04.
thank,
SantoshI didnt used ORADIM in the script. here is the script that I am using .
<target name="create-db-oracle" >
<echo>creating database ([${database.name}])</echo>
<exec dir="${target.script.dir}" executable="sqlplus" output="${target.log.dir}/create-db.log" failonerror="true">
<arg line="/nolog @create-db_${database.flavor}.sql" />
</exec>
</target>
with following connection properties
<properties>
<db.version>1.0</db.version>
<liquibase.remote.db.prompt>true</liquibase.remote.db.prompt>
<db.migrate>all</db.migrate>
<database.driver>oracle.jdbc.driver.OracleDriver</database.driver>
<database.url>jdbc:oracle:thin:@${database.host}:${database.port}/${database.name}</database.url>
<database.user>santosh</database.user>
<database.schema.user>project</database.schema.user>
<database.admin.user>system</database.admin.user>
<database.flavor>oracle-11g</database.flavor>
<database.name>dcm</database.name>
</properties>
<properties>
<database.host>localhost</database.host>
<database.port>1521</database.port>
<database.password>A_Pass123</database.password>
<database.schema.password>projectpassword</database.schema.password>
<database.admin.password>oracle#</database.admin.password>
</properties>
Edited by: user548284 on Jan 12, 2011 5:56 PM -
Maven giving "annotations are not supported in -source 1.3" for @Entity
I m using maven for spring, hibernate with jpa . When i m running comman "mvn clean install" ,it is giving error in compilation of a bean class which is using jpa annotations.The error is :
annotations are not supported in -source 1.3
(use -source 5 or higher to enable annotations)
@Entity
Pom.xml is as below :
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/maven-v4_0_0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>com.niit.core</groupId>
<artifactId>Spring3Example</artifactId>
<packaging>jar</packaging>
<version>1.0-SNAPSHOT</version>
<name>Spring3Example</name>
<url>http://maven.apache.org</url>
<properties>
<org.springframework-version>3.1.2.RELEASE</org.springframework-version>
</properties>
<repositories>
<repository>
<id>JBoss Repo</id>
<url>https://repository.jboss.org/nexus/content/repositories/thirdparty-releases</url>
</repository>
</repositories>
<build>
<plugins>
<plugin>
<artifactId>maven-war-plugin</artifactId>
<version>2.0</version>
</plugin>
</plugins>
</build>
<dependencies>
<dependency>
<groupId>org.springframework</groupId>
<artifactId>spring-context</artifactId>
<version>${org.springframework-version}</version>
</dependency>
<!-- <dependency>
<groupId>hsqldb</groupId>
<artifactId>hsqldb</artifactId>
<version>1.8.0.2</version>
</dependency>
-->
<dependency>
<groupId>org.springframework</groupId>
<artifactId>spring-core</artifactId>
<version>${org.springframework-version}</version>
</dependency>
<dependency>
<groupId>junit</groupId>
<artifactId>junit</artifactId>
<version>3.8.1</version>
<scope>test</scope>
</dependency>
<dependency>
<groupId>javax</groupId>
<artifactId>javaee-api</artifactId>
<version>6.0</version>
<scope>provided</scope>
</dependency>
<dependency>
<groupId>org.hibernate</groupId>
<artifactId>hibernate-core</artifactId>
<version>3.6.10.Final</version>
</dependency>
<dependency>
<groupId>org.hibernate.java-persistence</groupId>
<artifactId>jpa-api</artifactId>
<version>2.0-cr-1</version>
</dependency>
<dependency>
<groupId>org.hibernate</groupId>
<artifactId>hibernate-entitymanager</artifactId>
<version>3.5.0-Beta-2</version>
</dependency>
<dependency>
<groupId>javax.servlet</groupId>
<artifactId>servlet-api</artifactId>
<version>2.5</version>
</dependency>
</dependencies>
</project>
And class is as below :
package com.niit.form;
import javax.persistence.Column;
import javax.persistence.Entity;
import javax.persistence.GeneratedValue;
import javax.persistence.Id;
import javax.persistence.Table;
@Entity
@Table(name="CONTACTS")
public class Contact {
@Id
@Column(name="ID")
@GeneratedValue
private Integer id;
@Column(name="FIRSTNAME")
private String firstname;
public String getFirstname() {
return firstname;
public void setFirstname(String firstname) {
this.firstname = firstname;
public void setLastname(String lastname) {
this.lastname = lastname;
public Integer getId() {
return id;
public void setId(Integer id) {
this.id = id;
}java version is 1.6.0_24
There is no settings.xml in users/.m2
I think , maven is using default settings.xml which is in M2_HOME\conf which has everything commented as below:
<?xml version="1.0" encoding="UTF-8"?>
<!--
Licensed to the Apache Software Foundation (ASF) under one
or more contributor license agreements. See the NOTICE file
distributed with this work for additional information
regarding copyright ownership. The ASF licenses this file
to you under the Apache License, Version 2.0 (the
"License"); you may not use this file except in compliance
with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing,
software distributed under the License is distributed on an
"AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
KIND, either express or implied. See the License for the
specific language governing permissions and limitations
under the License.
-->
<!--
| This is the configuration file for Maven. It can be specified at two levels:
|
| 1. User Level. This settings.xml file provides configuration for a single user,
| and is normally provided in $HOME/.m2/settings.xml.
|
| NOTE: This location can be overridden with the system property:
|
| -Dorg.apache.maven.user-settings=/path/to/user/settings.xml
|
| 2. Global Level. This settings.xml file provides configuration for all maven
| users on a machine (assuming they're all using the same maven
| installation). It's normally provided in
| ${maven.home}/conf/settings.xml.
|
| NOTE: This location can be overridden with the system property:
|
| -Dorg.apache.maven.global-settings=/path/to/global/settings.xml
|
| The sections in this sample file are intended to give you a running start at
| getting the most out of your Maven installation. Where appropriate, the default
| values (values used when the setting is not specified) are provided.
|
|-->
<settings xmlns="http://maven.apache.org/SETTINGS/1.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://maven.apache.org/SETTINGS/1.0.0 http://maven.apache.org/xsd/settings-1.0.0.xsd">
<!-- localRepository
| The path to the local repository maven will use to store artifacts.
|
| Default: ~/.m2/repository
<localRepository>/path/to/local/repo</localRepository>
-->
<!-- interactiveMode
| This will determine whether maven prompts you when it needs input. If set to false,
| maven will use a sensible default value, perhaps based on some other setting, for
| the parameter in question.
|
| Default: true
<interactiveMode>true</interactiveMode>
-->
<!-- offline
| Determines whether maven should attempt to connect to the network when executing a build.
| This will have an effect on artifact downloads, artifact deployment, and others.
|
| Default: false
<offline>false</offline>
-->
<!-- pluginGroups
| This is a list of additional group identifiers that will be searched when resolving plugins by their prefix, i.e.
| when invoking a command line like "mvn prefix:goal". Maven will automatically add the group identifiers
| "org.apache.maven.plugins" and "org.codehaus.mojo" if these are not already contained in the list.
|-->
<pluginGroups>
<!-- pluginGroup
| Specifies a further group identifier to use for plugin lookup.
<pluginGroup>com.your.plugins</pluginGroup>
-->
</pluginGroups>
<!-- proxies
| This is a list of proxies which can be used on this machine to connect to the network.
| Unless otherwise specified (by system property or command-line switch), the first proxy
| specification in this list marked as active will be used.
|-->
<proxies>
<!-- proxy
| Specification for one proxy, to be used in connecting to the network.
|
<proxy>
<id>optional</id>
<active>true</active>
<protocol>http</protocol>
<username>proxyuser</username>
<password>proxypass</password>
<host>proxy.host.net</host>
<port>80</port>
<nonProxyHosts>local.net|some.host.com</nonProxyHosts>
</proxy>
-->
</proxies>
<!-- servers
| This is a list of authentication profiles, keyed by the server-id used within the system.
| Authentication profiles can be used whenever maven must make a connection to a remote server.
|-->
<servers>
<!-- server
| Specifies the authentication information to use when connecting to a particular server, identified by
| a unique name within the system (referred to by the 'id' attribute below).
|
| NOTE: You should either specify username/password OR privateKey/passphrase, since these pairings are
| used together.
|
<server>
<id>deploymentRepo</id>
<username>repouser</username>
<password>repopwd</password>
</server>
-->
<!-- Another sample, using keys to authenticate.
<server>
<id>siteServer</id>
<privateKey>/path/to/private/key</privateKey>
<passphrase>optional; leave empty if not used.</passphrase>
</server>
-->
</servers>
<!-- mirrors
| This is a list of mirrors to be used in downloading artifacts from remote repositories.
|
| It works like this: a POM may declare a repository to use in resolving certain artifacts.
| However, this repository may have problems with heavy traffic at times, so people have mirrored
| it to several places.
|
| That repository definition will have a unique id, so we can create a mirror reference for that
| repository, to be used as an alternate download site. The mirror site will be the preferred
| server for that repository.
|-->
<mirrors>
<!-- mirror
| Specifies a repository mirror site to use instead of a given repository. The repository that
| this mirror serves has an ID that matches the mirrorOf element of this mirror. IDs are used
| for inheritance and direct lookup purposes, and must be unique across the set of mirrors.
|
<mirror>
<id>mirrorId</id>
<mirrorOf>repositoryId</mirrorOf>
<name>Human Readable Name for this Mirror.</name>
<url>http://my.repository.com/repo/path</url>
</mirror>
-->
</mirrors>
<!-- profiles
| This is a list of profiles which can be activated in a variety of ways, and which can modify
| the build process. Profiles provided in the settings.xml are intended to provide local machine-
| specific paths and repository locations which allow the build to work in the local environment.
|
| For example, if you have an integration testing plugin - like cactus - that needs to know where
| your Tomcat instance is installed, you can provide a variable here such that the variable is
| dereferenced during the build process to configure the cactus plugin.
|
| As noted above, profiles can be activated in a variety of ways. One way - the activeProfiles
| section of this document (settings.xml) - will be discussed later. Another way essentially
| relies on the detection of a system property, either matching a particular value for the property,
| or merely testing its existence. Profiles can also be activated by JDK version prefix, where a
| value of '1.4' might activate a profile when the build is executed on a JDK version of '1.4.2_07'.
| Finally, the list of active profiles can be specified directly from the command line.
|
| NOTE: For profiles defined in the settings.xml, you are restricted to specifying only artifact
| repositories, plugin repositories, and free-form properties to be used as configuration
| variables for plugins in the POM.
|
|-->
<profiles>
<!-- profile
| Specifies a set of introductions to the build process, to be activated using one or more of the
| mechanisms described above. For inheritance purposes, and to activate profiles via <activatedProfiles/>
| or the command line, profiles have to have an ID that is unique.
|
| An encouraged best practice for profile identification is to use a consistent naming convention
| for profiles, such as 'env-dev', 'env-test', 'env-production', 'user-jdcasey', 'user-brett', etc.
| This will make it more intuitive to understand what the set of introduced profiles is attempting
| to accomplish, particularly when you only have a list of profile id's for debug.
|
| This profile example uses the JDK version to trigger activation, and provides a JDK-specific repo.
<profile>
<id>jdk-1.4</id>
<activation>
<jdk>1.4</jdk>
</activation>
<repositories>
<repository>
<id>jdk14</id>
<name>Repository for JDK 1.4 builds</name>
<url>http://www.myhost.com/maven/jdk14</url>
<layout>default</layout>
<snapshotPolicy>always</snapshotPolicy>
</repository>
</repositories>
</profile>
-->
<!--
| Here is another profile, activated by the system property 'target-env' with a value of 'dev',
| which provides a specific path to the Tomcat instance. To use this, your plugin configuration
| might hypothetically look like:
|
| ...
| <plugin>
| <groupId>org.myco.myplugins</groupId>
| <artifactId>myplugin</artifactId>
|
| <configuration>
| <tomcatLocation>${tomcatPath}</tomcatLocation>
| </configuration>
| </plugin>
| ...
|
| NOTE: If you just wanted to inject this configuration whenever someone set 'target-env' to
| anything, you could just leave off the <value/> inside the activation-property.
|
<profile>
<id>env-dev</id>
<activation>
<property>
<name>target-env</name>
<value>dev</value>
</property>
</activation>
<properties>
<tomcatPath>/path/to/tomcat/instance</tomcatPath>
</properties>
</profile>
-->
</profiles>
<!-- activeProfiles
| List of profiles that are active for all builds.
|
<activeProfiles>
<activeProfile>alwaysActiveProfile</activeProfile>
<activeProfile>anotherAlwaysActiveProfile</activeProfile>
</activeProfiles>
-->
</settings> -
Deploy maven artifact using the wls-maven-plugin (12.1.1.0)
I am trying to use the wls maven plugin to deploy an artifact located in my local repository.
According to the documentation ( http://docs.oracle.com/cd/E24329_01/web.1211/e24368/maven.htm#autoId6 ) this can be done by specifying the maven coordinates in the source parameter. Again according to the doc it should be specified as groupId:artifactID:packaging:classifier:version.
I tried this but as was not working I decompiled the wls-maven-plugin jar where I first of all discoverd that what should be passed is groupId:artifactID:version instead of the full one.
The next problem is the regular expression used to detect this:
if (this.source.matches("\\S:\\S:\\S")) {As you can see this will only detect one character long groupID, artifactID and version (obviously this has never been tested ...).
Can the source code of this plugin be found somewhere so I can fix it myself, can oracle fix this quickly, ... what are my options here?
ThanksMy first question regards step number 2...
2. Extract the contents of the supplemental zip (eg: extract into /home/myhome/mywls )
wls12120 directory will be automatically created during extraction.
The file name is wls12120_dev_supplemental.zip .
When I put this file in the mywls directory and Extract All ( using Windows Explorer, if that matters ),
the directory created is actually named " wls12120_dev_supplemental " and it has 1 sub-directory named " wls12120 ".
So, is there something wrong with Step 2's text ?
Is there something wrong with how I interpreted Step 2's text ?
Is the actual directory and sub-directory I see being created the successful response / result ? Or did this step fail ? -
Logical AND in MDX Reporting Services Parameter
Hi, I would like to implement logical AND on a cube parameter. I have seen examples of hard-coded logical AND in MDX.
(http://salvoz.com/blog/2013/12/24/mdx-implementing-logical-and-on-members-of-the-same-hierarchy/)
But I'm not sure how to apply this to a parameter's MDX dataset.
Here is an example of the automatically generated MDX which uses logical OR:
This is the drop down parameter:
WITH MEMBER [Measures].[ParameterCaption] AS [Department].[Department].CURRENTMEMBER.MEMBER_CAPTION MEMBER
[Measures].[ParameterValue] AS
[Department].[Department].CURRENTMEMBER.UNIQUENAME MEMBER [Measures].[ParameterLevel] AS
[Department].[Department].CURRENTMEMBER.LEVEL.ORDINAL
SELECT {[Measures].[ParameterCaption], [Measures].[ParameterValue],
[Measures].[ParameterLevel]} ON COLUMNS
, [Department].[Department].ALLMEMBERS ON ROWS
FROM [MyCube]
And the demo report dataset is:
SELECT NON EMPTY { [Measures].[CompanyTbl Count] } ON COLUMNS,
NON EMPTY { ([Product Level No].[Product Level No].[Product Level No].ALLMEMBERS ) }
DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM
( SELECT ( STRTOSET(@DepartmentDepartment, CONSTRAINED) )
ON COLUMNS FROM [MyCube]) WHERE
( IIF( STRTOSET(@DepartmentDepartment, CONSTRAINED).Count = 1,
STRTOSET(@DepartmentDepartment, CONSTRAINED), [Department].[Department].currentmember ) )
CELL PROPERTIES VALUE,
BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING,
FONT_NAME, FONT_SIZE, FONT_FLAGSHi,
I can see there just one parameter @Department@Department in your script. But if you had two parameters that should return resultset affected by two parameters. You can do it as either select from subselect from subselect.
Example 1
SELECT
{x} ON COLUMNS,
{ROWS_SET} ON ROWS
FROM
(SELECT StrToSet(@Param1) ON COLUMNS FROM
(SELECT StrToSet(@Param2) ON COLUMNS FROM
[CUBE_NAME]
Or crossjoin between 2 parameters
SELECT
{x} ON COLUMNS,
{ROWS_SET} ON ROWS
FROM
(SELECT StrToSet(@Param1)*StrToSet(@Param2) ON COLUMNS FROM
[CUBE_NAME]
Jiri
Jiri Neoral -
Report RFKLBU10: Missing Parameter for Logical filename in Release ERP 2005
Hello Experts,
Report RFKLBU10 in Sap Release 4.6c hat a parameter "Old dataset logical name".
The new version of this report in SAP Release ERP 2005 there is no such parameter.
Is this a SAP-Bug ?
Best regards,
MikeThere are no Export or Print events accessible for the viewer
Since it sounds like you are creating the reportdocument object in your click event, the settings on this object become out of scope on successive postbacks executed by other events.
to get around this without major changes, you can place your "report" object in session in this event and retrieve it from session on successive postbacks. This should solve your problems around navigation, printing and exporting. What you will need to do is check if the session object exists (usually in page_load or page_initialze) and if so, retrieve it from session and bind it to the viewer's reportsource. If the session object does not exist, then do nothing (ie you have not clicked your button yet that retrieves the parameter values from session and loads the report). Also, in your click event you can check if the report session object exists and if so, remove it so that it can be re-created with your new parameter values (ie i'm assuming the only time you want to set parameter values is in this event).
Dan -
Unable to capture the parameter values from a PL/SQL procedure
hi.
i'm trying to capture the parameter values of a PL/SQL procedure by calling inside a anonymous block but i'm getting a "reference to uninitialized collection error" ORA-06531.
Please help me regarding.
i'm using following block for calling the procedure.
declare
err_cd varchar2(1000);
err_txt VARCHAR2(5000);
no_of_recs number;
out_sign_tab search_sign_tab_type:=search_sign_tab_type(search_sign_type(NULL,NULL,NULL,NULL,NULL));
cntr_var number:=0;
begin
rt843pq('DWS','3000552485',out_sign_tab,no_of_recs,err_cd,err_txt);
dbms_output.put_line('The error is ' ||err_cd);
dbms_output.put_line('The error is ' ||err_txt);
dbms_output.put_line('The cntr is ' ||cntr_var);
for incr in 1 .. OUT_SIGN_TAB.count
loop
cntr_var := cntr_var + 1 ;
Dbms_output.put_line(OUT_SIGN_TAB(incr).ref_no||','||OUT_SIGN_TAB(incr).ciref_no||','||OUT_SIGN_TAB(incr).ac_no||','||OUT_SIGN_TAB(incr).txn_type||','||OUT_SIGN_TAB(incr).objid);
end loop;
end;
Error is thrown on "for incr in 1 .. OUT_SIGN_TAB.count" this line
Following is some related information.
the 3rd parameter of the procedure is a out parameter. it is a type of a PL/SQL table (SEARCH_SIGN_TAB_TYPE) which is available in database as follows.
TYPE "SEARCH_SIGN_TAB_TYPE" IS TABLE OF SEARCH_SIGN_TYPE
TYPE "SEARCH_SIGN_TYPE" AS OBJECT
(ref_no VARCHAR2(22),
ciref_no VARCHAR2(352),
ac_no VARCHAR2(22),
txn_type VARCHAR2(301),
objid VARCHAR2(1024))............We don't have your rt843pq procedure, but when commenting that line out, everything works:
SQL> create TYPE "SEARCH_SIGN_TYPE" AS OBJECT
2 (ref_no VARCHAR2(22),
3 ciref_no VARCHAR2(352),
4 ac_no VARCHAR2(22),
5 txn_type VARCHAR2(301),
6 objid VARCHAR2(1024))
7 /
Type is aangemaakt.
SQL> create type "SEARCH_SIGN_TAB_TYPE" IS TABLE OF SEARCH_SIGN_TYPE
2 /
Type is aangemaakt.
SQL> declare
2 err_cd varchar2(1000);
3 err_txt VARCHAR2(5000);
4 no_of_recs number;
5 out_sign_tab search_sign_tab_type:=search_sign_tab_type(search_sign_type(NULL,NULL,NULL,NULL,NULL));
6 cntr_var number:=0;
7 begin
8 -- rt843pq('DWS','3000552485',out_sign_tab,no_of_recs,err_cd,err_txt);
9 dbms_output.put_line('The error is ' ||err_cd);
10 dbms_output.put_line('The error is ' ||err_txt);
11 dbms_output.put_line('The cntr is ' ||cntr_var);
12 for incr in 1 .. OUT_SIGN_TAB.count
13 loop
14 cntr_var := cntr_var + 1 ;
15 Dbms_output.put_line(OUT_SIGN_TAB(incr).ref_no||','||OUT_SIGN_TAB(incr).ciref_no||','||OUT_SIGN_TAB(incr).ac_no||','||OUT_SIGN
TAB(incr).txntype||','||OUT_SIGN_TAB(incr).objid);
16 end loop;
17 end;
18 /
The error is
The error is
The cntr is 0
PL/SQL-procedure is geslaagd.Regards,
Rob. -
Unable to capture value inside parameter T_LFBK of FK03 in display mode
Hi Experts,
I have to trigger a mail whenever there is a change in fields that are captured in parameter t_ffbk.
However i am unable to capture the the screen values for this parameter as FK03 is in display mode.Please tell me how can i capture the screen field values in parameter T_LFBK.
<Point offer removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Jul 28, 2011 5:48 PMHi Experts,
I have to trigger a mail whenever there is a change in fields that are captured in parameter t_ffbk.
However i am unable to capture the the screen values for this parameter as FK03 is in display mode.Please tell me how can i capture the screen field values in parameter T_LFBK.
<Point offer removed by moderator>
Thanks in advance.
Edited by: Vinod Kumar on Jul 28, 2011 5:48 PM -
Cannot assign an empty string to a parameter with JDBC type VARCHAR
Hi,
I am seeing the aforementioned error in the logs. I am guessing its happening whenever I am starting an agent instance in PCo. Can somebody explain whats going on?
Regards,
Chanti.
Heres the complete detail from logs -
Log Record Details
Message: Unable to retreive path for , com.sap.sql.log.OpenSQLException: Failed to set the parameter 1 of the statement >>SELECT ID, PARENTID, FULLPATH, CREATED, CREATEDBY, MODIFIED, MODIFIEDBY, REMOTEPATH, CHECKEDOUTBY FROM XMII_PATHS WHERE FULLPATH = ? <<: Cannot assign an empty string to a parameter with JDBC type >>VARCHAR<<.
Date: 2010-03-12
Time: 11:32:37:435
Category: com.sap.xmii.system.FileManager
Location: com.sap.xmii.system.FileManager
Application: sap.com/xappsxmiiearSounds like a UI browsing bug (when no path is selected from a catalog tree folder browser) - I would suggest logging a support ticket so that it can be addressed.
-
Replacing NULL and EmptyString('') with "Unknown" in SSRS parameter dropdown
All,
What I want to do is, in the SSRS parameter drop down, instead of showing NULL and Blank values(), i want to categorize them as "Unknown", so, if the user selects "Unknown" from the SSRS drop down parameter, he should be able to see all
the records that have NULL values or empty strings in that particular column in the result set.
Can you tell me, how should I handle it in my main stored proc as well as in the dataset?
Right now, i have something like this:
Where
(t1.name in (select value from dbo.Split(@TName,',')) OR @TName IN ('All'))
-- Where t1.Name has empty strings and NULL values. Both of these values should be categorized under "Unknown"
-- How would the dataset query look like? Right now I have this query for populating the drop down for that parameter:
Select All
UNION
Select Distinct Name
Order BY 1Hello,
Please refer to the following stored procedure:
SELECT
CASE WHEN TName IS NULL OR TName = ''
THEN 'Unknown' ELSE TName END AS TName
From DemoTable
Then, use following query code to get the parameter values:
SELECT Distinct
CASE WHEN TName IS NULL OR TName = '' THEN 'Unknown'
ELSE TName END AS TName
FROM DemoTable
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
Host parameter null and convert SOAP to HTTPUrl
Hi,
We are trying to fire a SOAP request and print the response but its throwing this error
Exception in thread "main" java.lang.IllegalArgumentException: host parameter is null
The piece of code is:
HttpClient hc = new HttpClient();
System.out.println("Came here");
int iResultCode = hc.executeMethod(post);
executeMethod(post) is failing but when I print the value of post, its �org.apache.commons.httpclient.methods.PostMethod@fd54d6�
Can anybody throw some light on this error and how to solve it??
Also, there�s another issue.
We are upgrading from Weblogic 7.2 to 9.1
Earlier we were able to pass the request and get the response in HTTPUrl form but now after upgrading, its getting passed in SOAP format. Is there any way to bypass the SOAP and get it in HTTPUrl format or what are the configurations to be made to adapt to the SOAP format?
connection =(HttpURLConnection) url.openConnection();
This line was returning HTTPUrl format, now its coming in SOAP formatyour PostMethod takes the Url as the parameter. Check you are using the proper URl i.e like http://host:port/name?params like that
-
SOURCE_PACKAGE is INCOMPATIBLE with the FORMAL PARAMETER DATA_PACKAGE
Hello Experts,
Infocube A is getting updated from shopping carts DSO. I have added 3 new fields in SC DSO then cube transformations got inactive. I do not want 3 new fields in cube. we have report on DSO. Below is syntax error when checking transformations.
Error: In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".
3 New fields are available in tys_SC_1 but not available in tys_SC_1_full. I tried to insert 3 fields in tys_SC_1_full but still it is showing same syntax error. And more TYPE is availalbe tys_TG_1_full. This type does not have 3 fields.
Please advice.
Thanks in advance.
Regards
Venkata.Hello Rathy,
I have resolved issue by addinng fields to data package. Issue is becasue of 4 fields in source and I have added only 3 fields in data package. Added one more field to data package and no syntax errors when checked.
Thanks for the input and points assigned.
Regards
Venkata Agraharam. -
I have a multi-select parameter that can have a list of thousands of entries. In general, the user will pick a few entries from the list or "Select All". If they check "Select All", I would much prefer that I get a NULL or an empty string
instead of a list of all values. Is there any way to do that?
In experimenting with a work-around, I tried putting an "All" label with a null value in the list, but it is ignored (does not display in the drop-down). If I use an empty string for the value, my "All" entry does get displayed, but so
does "Select All", which is confusing. Is there a way to suppress "Select All"?
- MarkI adapted the following from a workaround posted by JNeo on 4/16/2010 at 11:14 AM at
http://connect.microsoft.com/SQLServer/feedback/details/249227/multi-value-select-all-parameter-in-reporting-services
To get a null value instead of the full list of all values when "Select All" is chosen:
1) Add a multi-value parameter "MyParam" that lists the values to choose.
2) Add a DataSet "ParamCount" identical to the one used by "MyParam", except that it returns a single column named [Count] that is a COUNT(*) of the same data
3) Add a parameter "MyParamCount", set it to hidden and internal, then set the default value to 'Get values from a query', choosing "ParamCount" for the Dataset and the one [Count] column for the Value field.
4) Change the parameter for the main report DataSet so that instead of using [@MyParam], it uses this expression:
=IIF(Parameters!MyParam.Count =
Parameters!ParamCount.Value, Nothing, Join(Parameters!MyParam.Value, ",")) -
Memory Problem with SEt and GET parameter
hi,
I m doing exits. I have one exit for importing and another one for changing parameter.
SET PARAMETER exit code is ....
*data:v_nba like eban-bsart,
v_nbc like eban-bsart,
v_nbo like eban-bsart.
v_nbc = 'CAPX'.
v_nbo = 'OPEX'.
v_nba = 'OVH'.
if im_data_new-werks is initial.
if im_data_new-knttp is initial.
if im_data_new-bsart = 'NBC' or im_data_new-bsart = 'SERC' or im_data_new-bsart = 'SERI'
or im_data_new-bsart = 'SER' or im_data_new-bsart = 'SERM' or im_data_new-bsart = 'NBI'.
set parameter id 'ZC1' field v_nbc.
elseif im_data_new-bsart = 'NBO' or im_data_new-bsart = 'NBM' or im_data_new-bsart = 'SERO'.
set parameter id 'ZC2' field v_nbo.
elseif im_data_new-bsart = 'NBA' or im_data_new-bsart = 'SERA'.
set parameter id 'ZC3' field v_nba.
endif.
endif.
endif. *
and GET PARAMETER CODE IS....
get parameter id 'ZC1' field c_fmderive-fund.
get parameter id 'ZC2' field c_fmderive-fund.
get parameter id 'ZC3' field c_fmderive-fund.
FREE MEMORY ID 'ZC1'.
FREE MEMORY ID 'ZC2'.
FREE MEMORY ID 'ZC3'.
In this code i m facing memory problem.
It is not refreshing the memory every time.
So plz give me proper solution.
Its urgent.
Thanks
RanveerHi,
I suppose you are trying to store some particular value in memory in one program and then retieve it in another.
If so try using EXPORT data TO MEMORY ID 'ZC1'. and IMPORT data FROM MEMORY ID 'ZC1'.
To use SET PARAMETER/GET PARAMETER the specified parameter name should be in table TPARA. Which I don't think is there in your case.
Sample Code :
Data declarations for the function codes to be transferred
DATA : v_first TYPE syucomm,
v_second TYPE syucomm.
CONSTANTS : c_memid TYPE char10 VALUE 'ZCCBPR1'.
Move the function codes to the program varaibles
v_first = gv_bdt_fcode.
v_second = sy-ucomm.
Export the function codes to Memory ID
EXPORT v_first
v_second TO MEMORY ID c_memid. "ZCCBPR1 --- Here you are sending the values to memory
Then retrieve it.
Retrieve the function codes from the Memory ID
IMPORT v_first TO v_fcode_1
v_second TO v_fcode_2
FROM MEMORY ID c_memid. "ZCCBPR1
FREE MEMORY ID c_memid. "ZCCBPR1
After reading the values from memory ID free them your problem should be solved.
Thanks
Barada
Edited by: Baradakanta Swain on May 27, 2008 10:20 AM
Maybe you are looking for
-
How much RAM can go into my Macbook Pro
Hey, I wanted to ask how much RAM can go into my Mid 2012 Macbook Pro I looked at this guide http://support.apple.com/kb/HT1270?viewlocale=en_US#link1 and it said I can only but In 8 GB I want to put 16 GB but was wondering if this would ruin my comp
-
How to clear the rows in a jTable
Can anyone tell me how to clear the contents of all the rows in a jTable?
-
so i was walkin in the woods and somehow i droped it. its not conected to the internet. i know because i checked icloud. when i walked around to look for it i used a friends phone to call it so it would ring, but it went straight to voice mail. So, h
-
Table for checking System Status in a Service Order
Hi, In which table can I find System Status (like REL - Released) of a Service Order ? Thanks. Raj
-
Hi, Can any one help how to create a XML report so that i should be saved in text format OR is there any way where when you click on view output a dialog box with open, save and cancel option appears so that i can save the output in required format.