Maverick install loop
I have just gotten a new hard drive for my MacBook Pro with Lion OS, but tried to upgrade to Mavericks. Installation looped around 10 minutes before finish and kept freezing. I now cannot get back to the original settings- every time I try to restart installation starts again and crashes. Does anyone know how I can return to my previous OS? I do not have a time machine backup for the new hard drive. Thanks!
FishEvoDevo,
when you ran Disk Utility, had you booted into Recovery mode when you did so? If so, have you tried reïnstalling Lion or Mavericks (whichever OS the new drive’s current recovery partition came from) from Recovery mode? If you’ve tried that too, then you’ll need to erase your new drive and reïnstall the version of OS X that’s on your grey Mac OS X Install DVD. Once that’s been done, run Software Update (and if necessary, install Snow Leopard from the white retail DVD and run Software Update again) to get to 10.6.8. From 10.6.8, you can redownload and reïnstall either Lion or Mavericks, and then run Software Update once more.
Similar Messages
-
Laptop Crashed During Maverick Install -- Need Help
Hello Everyone,
Before we get started, I just want to open with this info: My Macbook Pro is from 2008, and has a notorious habit of crashing... I hear what sounds like a rhythmic "ticking" sound from within the laptop, and everything on screen freezes up, and I have to do a hard-reboot. Other than that and a few graphical glitches with games, it runs seamlessly and had a good 19 GB free while attempting the update. Also to note, I have a BootCamp partition of about 30 GB for Windows XP. Additionally, I was an IDIOT and did NOT set up Time Machine or make a backup for my files, because, I repeat, I'm an IDIOT apparently.
So I had 10.6.8 installed -- Snow Leopard... and I heard there was a new free update to 10.8.0: Maverick. Of course it peaked my interest and I tried to install, not realizing it could potentially brick my laptop! Shoulda done some research
Anyway, here's what happened:
The download was successful, so I rebooted my computer and initialized the installation. Everything was fine, it said it would take about 50 minutes (even though it took a LOT longer)... and the install got not even half way before my computer crashed, with the infamous ticking sound. I was like, "oh sh**" because everyone knows that a crash during a major install is not good news. After I restarted the computer, it opened up the Maverick install again immediately, and attempted to retry... but within 10 minutes, an error pops up: "Install failed: OS X can’t be installed on the disk, because a recovery system can’t be created. Visit www.apple.com/support/no-recovery to learn more."
Of course at this point, I'm confused. I have no idea what that means. So I try to reboot to see if it would help, and the same error occured twice more.
This time, when I rebooted, I held Alt-Option to see if I could just select my HD drive and bypass the install. Nope. The only options were this: "Windows Partition, Maverick OSX Install, recovery-(something something)"... my HD drive wasn't even listed! This made me nervous. So, I selected the recovery disk option and it opened a menu with a few options, including reinstalling OSX, disk utility... etc. So I selected disk utility. I then proceeded to select my HD drive, and click "repair" in the first aid tab. It took about 10-15 minutes, but it successfully finished, giving me a green "Disk seems ok" message. This was a bit of relief. But now that the disk is repaired, how do I access it and exit the endless loop of Maverick installation? Do I need to reinstall OSX with my original disk/Snow Leopard disk?
Please help me recover my HD drive... I desperately need my laptop for school.
Thanks in advance. If you need any more additional info on my computer, I will be happy to try and provide it.if you have no install disk, best to do fsck. http://docs.info.apple.com/article.html?artnum=106214 hopefully that will do something for you. when you say it "freezes" at startup it is hard to know what to tell you. there are different types of screens that occur with startup issues. this is an incredible article for startup issues--http://docs.info.apple.com/article.html?artnum=106464. do not worry that it says "10.3.9 or earlier". these steps are reliable for tiger as well. i hope that works for you.[:)]
-
Failed Mavericks Install / Time Machine
My iMac is stuck in a loop after failed Mavericks install. The message told me to back up data, erase and install again. Naturally, I hadn't run Time Machine in a month and had some important files to try and save (stupid, I know). Fortunately, I got the real important stuff backed up using firewire mode and an old MacBook.
At this point, the iMac can't boot into either safe mode or into the disk repair with my old Snow Leopard disk. My question is whether I can now connect my external drive with an existing backup to the MacBook and have it make a backup of the iMacs contents. I'm curious whether Time Machine will recognize the iMac's hard drive as the same volume even though it is mounted on the MacBook as an external drive. Will this work or should I go buy a new external drive and try and clone the iMac's contents?
I have AppleCare but I'd like to take care of this prior to taking it in as they may want to replace the drive. The Time Machine method seems preferable so I can restore the system exactly the way it was very easily.My iMac is stuck in a loop after failed Mavericks install. The message told me to back up data, erase and install again. Naturally, I hadn't run Time Machine in a month and had some important files to try and save (stupid, I know). Fortunately, I got the real important stuff backed up using firewire mode and an old MacBook.
At this point, the iMac can't boot into either safe mode or into the disk repair with my old Snow Leopard disk. My question is whether I can now connect my external drive with an existing backup to the MacBook and have it make a backup of the iMacs contents. I'm curious whether Time Machine will recognize the iMac's hard drive as the same volume even though it is mounted on the MacBook as an external drive. Will this work or should I go buy a new external drive and try and clone the iMac's contents?
I have AppleCare but I'd like to take care of this prior to taking it in as they may want to replace the drive. The Time Machine method seems preferable so I can restore the system exactly the way it was very easily. -
Mavericks install was unsuccessful, won't restart without running the install again
Help - I'm trying to update my mac 10.6.8 to Mavericks. I started the install which stopped - it said the install was unsucessful, and that I would need to back up and clear the Hard Drive before installing. However... when I restart it runs the Mavericks install again... t's a loop and it's driving me nuts.
Is there a way around that so I can restart to the old operating system? Any help appreciated! Thanks!You are welcome.
Try booting off the Snow Leopard DVD by holding down C during a restart or holding down the option/alt key and selecting the DVD. Run Disk Utility Repair Disk and Repair Permissions. Reboot and test.
If that doesn't work and you have an external hard drive that is empty, boot off the DVD and run Disk Utility/Restore to copy your hard drive to the external hard drive. Then erase your computer hard drive (format Mac OS Extended ( Journaled) and re-install Snow Leopard. Reboot normally and update to 10.6.8. Download Mavericks again (if desired) and try the upgrade again. If successful, you should be able to delete the installer from the external drive and copy your files back to your computer.
10.6.8 Combo Updater
Then do a backup, preferably two separate backups using Time Machine or a cloning program.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested
Commonly Used Backup Methods -
Stuck in a perpetual install loop...
Ok, now I am in a perpetual install loop...
Maverick fails to install - error msg that HD is damaged and can't be repaired. Reboot in recovery mode and run verify disk-all ok. Run repair disk anyway-all ok. Run verify permissions for sh!ts and giggles-all ok. Run repair permissions too-all ok. Reboot....maverick automatically starts to install. And we start all over again.
Can't force quit the installer.
Question: can I reboot my mac book as an external drive and manually delete maverick from the HD?When you start up the Mac hold the shift key as soon as you hear the Mac "chime" (boot sound).
Release the shift key when you can see a spinning wheel on your display.
When the login window appears select "restart", don't hold any keys now.
http://docs.info.apple.com/article.html?artnum=306998 -
My Mac Book Pro had a split drive with Windows Microsoft Access on it and it was removed when Mavericks installed. I need this so how can I go back to the old system?
Restore from the backup you had prior to installing Mavericks.
However, the upgrade should not have altered your partition scheme. Did your erase and format the drive prior to upgrading? -
Looking for "createinstallmedia" kb/5856 I do not find it on my Maverick installed system?
With Mavericks installed and these instructions the command cannot be found?
Creating a bootable OS X installer in OS X Mavericks
With OS X Mavericks, you can create a bootable OS X installer which can be used to install the operating system while started from removable media, such as a USB flash drive.
Follow these steps to create a bootable OS X installer:
Use the Mac App Store to download the OS X installer app.
Mount the volume you wish to convert into a bootable installer. This could be removable media, such as a USB flash drive, or a secondary internal partition.
Use the createinstallmedia tool to convert the volume from step two into a bootable installer based off the installer app from step one. To learn how to use createinstallmedia, execute this command in Terminal:
/Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia
You may need to adjust the path to the OS X installer app in the above command.
Note: createinstallmedia is only intended to be used with the version of OS X installer app it came with.
Last Modified: Oct 22, 2013Hello, lets see if we can find it & the path...
Find Any File...
http://apps.tempel.org/FindAnyFile/
Hold Option or alt key when selecting Find to Find All.
Search All for Name>Contains...
createinstallmedia -
Time machine won't back up after Maverick install
Installed Maverick today on macbook pro, then have been unable to back up to Time Machine to my Western Digital 3TB drive. Last back up was successful just before install earlier today.
Time Machine Error "Files can’t be copied onto the backup disk because it appears to be read-only.
and a second message
Time Machine couldn’t complete the backup to “My Book”. Files can’t be copied onto the backup disk because it appears to be read-only. You may need to repair or reformat the disk using Disk Utility. If the disk can’t be repaired, you must use a different disk for backups. Open Time Machine preferences to select a different backup disk.
First restarting after Maverick install I received an error message that the disk "my book" could not be repaired.
When I go to get info on the external drive, under sharing and permissions it sayes I can read only, and I cant figure out how to change this everything to try is grey'd out.
Any help in fixing the problem and understanding the issue.I'm also having this issue. I havn't had it before.
Any help would be appreciated. -
Speed (lack of) issues-Macbook pro post Maverick Install
Hi all... long time browser first time poster... this maverick install is killing my life.
Upgraded to Maverick, my computer was almost useless with spinning beach ball of death for everything I opened. I did the 'usual' useless stuff that someone at a realtively low IT base (like myself) would do, cleaned out trash, restarted etc. Check what was running etc, no love.
Read a bunch of other posts, tried some seemingly good advice, like verifying disk permissions and repairing disk permissions. This definitely helped, alot, and I was now able to use my notebook again, but it's still much slower than usual in most areas, and might be lucky to survive the day at work as I fear I will throw it at the wall next time excel locks up on me!
Here is my etrecheck output as most suggest I require before asking for help. I would LOVE any advice that may help me clean this up.
NOTE- the time machine back ups have actually occured to the best of my knowledge, so i don't fully understand this in the report.
Many thanks, Levi
PS- I am currently running another time machine back up now. And, no, stupidly i did not do a recent one before i installed.... yes i realise this was silly!
Hardware Information:
MacBook Pro (15-inch, Mid 2010)
MacBook Pro - model: MacBookPro6,2
1 2.4 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics - VRAM: 288 MB
NVIDIA GeForce GT 330M - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C64) - Uptime: 0 days 0:36:23
Disk Information:
TOSHIBA MK3255GSXF disk0 : (320.07 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 319.21 GB (121.05 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898
USB Information:
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Internal Memory Card Reader
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Seagate Desktop 1 TB
EFI (disk1s1) <not mounted>: 209.7 MB
Time Machine Backups (disk1s2) <not mounted>: 999.86 GB
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.teamviewer.teamviewer_service.plist 3rd-Party support link
Launch Agents:
[System] com.brother.LOGINserver.plist 3rd-Party support link
[System] com.citrix.AuthManager_Mac.plist 3rd-Party support link
[System] com.citrix.ServiceRecords.plist 3rd-Party support link
[System] com.teamviewer.teamviewer.plist 3rd-Party support link
[System] com.teamviewer.teamviewer_desktop.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.adobe.ARM.[...].plist 3rd-Party support link
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
[not loaded] ws.agile.1PasswordAgent.plist 3rd-Party support link
User Login Items:
iTunesHelper
Fantastical
Google Drive
AdobeResourceSynchronizer
Dropbox
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 3rd-Party support link
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 3rd-Party support link
DivXBrowserPlugin: Version: 2.1 3rd-Party support link
Flash Player: Version: 12.0.0.77 - SDK 10.6 3rd-Party support link
CitrixICAClientPlugIn: Version: 1.0 - SDK 10.6 3rd-Party support link
OVSHelper: Version: 1.0 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
iPhotoPhotocast: Version: 7.0
Safari Extensions:
DivX HiQ: Version: 2.1.1.94
1Password: Version: 3.9.20
DivX Plus Web Player HTML5 <video>: Version: 2.1.1.94
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
Google Earth Web Plug-in: Version: 7.1 3rd-Party support link
3rd Party Preference Panes:
Citrix ShareFile Sync 3rd-Party support link
DivX 3rd-Party support link
Flash Player 3rd-Party support link
Perian 3rd-Party support link
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
ControlCenter: Version: 2.5.3 - SDK 10.5 3rd-Party support link
/Library/Printers/Brother/Utilities/ControlCenter/ControlCenter.app
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
/Applications/iWork '09
Time Machine:
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 297.29 GB Disk used: 184.55 GB
Destinations:
Time Machine Backups [Local] (Last used)
Total size: 0 B
Total number of backups: (null)
Size of backup disk: Too small
Backup size 0 B < (Disk used 184.55 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
3% Safari
3% WindowServer
3% mdworker32
1% Mail
1% Microsoft Excel
Top Processes by Memory:
172 MB Microsoft Excel
156 MB com.apple.IconServicesAgent
135 MB Safari
131 MB Mail
111 MB com.apple.WebKit.WebContent
Virtual Memory Information:
574 MB Free RAM
1.67 GB Active RAM
900 MB Inactive RAM
781 MB Wired RAM
471 MB Page-ins
0 B Page-outsLast post on this topic.
Problem solved.....
Apple support on phone could not work it out.
Apt at genius bar saw many expected thoughts- First assumption was hard drive was gone, tested this, all ok. Next was the disk needed a full repair, this would fix it. No good either. Final call- erase the entire system. Re-install the OS, and then manually trasnfer back my files from the time machine back ups, NO restore.
this has solved it.
Clearly my computer could not handle the Maverick install without a full erase prior. Be warned, it can absorb a **** of a lot of your time, and if like myself your computer is your day-to-day work horse... it could cause you some serious down time.
Levi -
I cannot down load Yosemite from the App Store. It keeps saying there is an error. I have Mavericks installed now. Can I download Yosemite anywhere else besides the App Store?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ appstore.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
☞ The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. -
My printers are not working after mavericks install.
The printer just PAUSE and can't be resumed.
What can I do to fix - PLEASE HELP!
It is my lifeline - we are a print shop!Go to the printer manufacture website and download the drivers for your printer model for OS X v10.9 Mavericks.
Then open System Preferences > Printers & Scanners > Print
Select your printer on the left then click - (minus)
Then click + (plus) to add the printer. -
Apple Hardware Test Unavailable? Mac Pro 2008, Mavericks installed
Restarting my early 2008 Mac Pro with Mavericks installed while holding down the "D" key and it's just booting up like normal. Tried holding it before it shuts down, holding it after the startup tone, and holding it after the grey screen appears (which the apple site says is wrong).
Any suggestions?That will only work with the original discs that came with the computer.
How to invoke and interpret the Apple hardware tests | MacFixIt - CNET Reviews
Using Apple Hardware Test -
Crystal Report XI Release 2 stuck in install loop
Post Author: jerryk
CA Forum: Upgrading and Licensing
Hi,
Since upgrading from Crystal Reports XI to release 2 (Windows XP pro), I have been stuck in an install loop. Each time I launch Crystal Reports XI Release 2 from the start menu is says "installing Crystal Reports XI Release 2". How can I prevent this from occurring?
jerryPost Author: mteegarden
CA Forum: Upgrading and Licensing
Try this post http://technicalsupport.businessobjects.com/cs/forums/thread/3798.aspx I had the same problem. Completely removed the software and registry keys, rebooted and then installed XI R2 and it worked fine. -
i have mavericks installed.
my safari crush since this morning (I can not scroll between pages, if I try to reopen the page, safari open in exactelly same point is blocked).
to use it again i have to close the program and reopen it. after few clicks crushes again. any idea?Quit the application. Force quit if necessary.
Relaunch it by holding down the shift key and clicking its icon in the Dock. From the menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data -
EYETV LITE WILL NOT STARTUP WITH NEW MAVERICK INSTALL
eye lite will not start up with new maverick installed untill you unpluge usb then reinstall.
Well, I download the driver for Windows 8.1 64 bit, it appears to down load then says extracting and the bar goes along to 100% then nothing. There is no option to install the printer wirelessly, the printer does not appear in the devices and printers, the Scan Doctor tries to fix the problem and just says need to install the wireless facility by using the manual when I select the wireless option. As I said, I can plug in USB and use printer fine but what is the point of having wireless if it doesn't work? Printer worked fine when installed on Home Hub 2. Got a new lap top and still no problems. Problems started when had to have new Home Hub as the broadband connection kept dropping out. BT sent HH3 as don't do HH2 any more. Realised that the printer was still holding the details of the old hub but couldn't find a way of changing this. Reset printer to factory wireless settings so not holding these now. Cannot use CD to load printer as doen't work with Windows 8.
Maybe you are looking for
-
Tax code field under INVOICE Tab to be Mandatory for Inter Company PO
Dear All, In MIRO Tax code field under INVOICE Tab to be Mandatory for Inter Company PO u2013 ZNB & ZRT for company code 0001. How do we set as mandatory fields for those two intercompany document types. Regards, Teja
-
New hard drive. Will not boot from install dvd.
Earlier this week, I dropped my computer. It was probably a 3 foot fall. Computer froze, so I restarted and got the flashing folder with question mark. Started in internet recovery, and disk utility confirmed that I had killed my hard drive. Got a ne
-
HT204291 No picture when mirroring airplay from iPhone to apple tv
No picture when mirroring airplay from iPhone to apple tv
-
I want to buy recovery disk for T61
Hello I want to buy recovery disk for My Thinkpad T61. How do I do? Thanks
-
Which is better and faster in bootcamp xp or vista or 7
i have installed windows 7 by boot camp i have noticed its boot is very slow i m thinking to remove it and try xp anyway my question is which is better and faster xp or vista or 7? in bootcamp in the boot and in the normal use applications inside win