Max number of ALV columns

Hello everyone,
I'm trying to create an ALV grid with 740 columns. My fieldcatalog has these, but when the ALV is shown, there are only the first 90 columns. Where is the rest?
Is there a restriction as to lenghth of an outtab line? How many columns are viewable max?
Are the columns with ls_fieldcatalog-no_out = 'X' counted in the max no. of columns?
Thanks for your help,
Friederike

hi,
The advantage of ALV isn't to can listed list longer than 255 char, but to can manage several colunms and decide which ones have to be showed and which ones hided.
Anyway you there's a limit of the numbers of colunm of ALV grid.
If you easly need to display an ABAP list longer than 255 char you can use NEW-PAGE statament.
regards,
keerthi.

Similar Messages

Get the max count of the column list item

Hi,
I have a list with the 'TO' column of type people. My task is to get persons name who is featured the max number of time in the 'TO' column.
What is the best possible solution OOB. I dont want to go with custom solution.
Thanks,
Ankit

Hello Ankit,
I understand that you want to get total of "To" column. I would suggest you modify the current view of list and use "Group By" and Total section to get Max number of that column. Just try this and check whether it fulfils your need or
not.
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Max number of columns in table for compression

i was told that 256 columns is the max number in a single table for oracle to do compression on table. Can anyone confirm this ?

I can't confirm it off the top of my head but if it is the case then it is documented at http://tahiti.oracle.com you can look it up yourself.
What I do want to weigh in on is the insanity of a table with more than 256 columns. I consider any table with more than 50 columns suspect, more than 100 likely a strong indication that someone understands little about normalization. Anyone contemplating 255+ columns should have their fingers removed from their keyboard by force if necessary.

Max number of columns in a Webi report

In a worst-case scenario test, I requested about 1700 columns in a Webi report, but only a little more than 300 appeared in the SQL; a TOAD request for the same 1700 columns was successful. Is there an upper limit for the number of objects that can appear in a Webi report? Is there a parameter that could increase the limit?

My eyes read the first half and my brian assumed the second half.
I dont think there is a limitaion on the number of objects that a WebI report can pull.
The only limitation I know of is the maximum number of column that you can display in the report panel; the max number is 100,000.
With the limit on the max number of column diplay in a WebI report can be translated into the max number of columns in the query panel.
This setting is in CMC> Applications>Web Intelligence-->Quick Display mode

Planning Layout error K9162 - max number of columns in planning layout rest

Hello collegues,
our client would like to have 34 columns in planning layout costs activity inputs of TA KP67. But error message K9162 - max. number of columns is restricted to 30. So I tried to switch of the message with TA OBA5 application area K9 - msg number 162. But this does not work as the error comes up again even though the message is switched off.
Do you have some ideas?
Thanks and regards,
Christian

Hello,
thanks for your response. I have maintaine in OBMSG:
K9 162 WE E switch off selected
then in OBA5 for dialog and batch I have maintained -
but the error is upcoming again. So I think that this sort of message cannot be switched off as the planning layout is restricted to 30 columns by design maybe?
thanks and regards,
Christian

What's the max number of columns a table can have on 32 bit OS & 64 bit OS

What is the max number of columns a table can have on 32 bit OS & 64 bit OS ?
Edited by: sameer naik on 02-Jul-2010 02:11

For TimesTen 7.0 and 11.2.1 releases the limit on the number of columns per table is 1000 for both 32 and 64 bit TimesTen. This can be found in the documentation under System Limits.
Regards,
Chris

How to set naming standard that sets max number of words in column name?

Hi all,
Is it possible to set naming standard that sets max number of words in colum (or table) name?
I was looking video (1:08min)
http://download.oracle.com/otn_hosted_doc/sqldev/UserDefinedDesignRules/UserDefinedDesignRules.html
And here you can see how rule is triggered.
"...Name has 2 words; Max permitted - 1".
Thanks a lot

Hi,
you need to create glossary and set it in naming standards for your design.
This document is still valid - http://www.oracle.com/technetwork/developer-tools/datamodeler/datamodelernamingstandards-167685.pdf
Naming standard settings are located :
- DM 3.x - "Preferences>Data Modeler>Naming Standard"
- DM 4.0 - Design dialog>Settings>Naming Standard
If you want only check on number of words then glossary can be empty and you can set "Incomplete modifiers" option in that glossary.
Philip

At max how many logical columns can be created in RPD

Hi All,
At max how many logical columns can be created in RPD. I have a requirement of creating 200 columns. Will there be any problem .
Is there any predefind number of columns for RPD creation??
Please help ..

Hi Annapurna,
There's no limit that I'm aware of or which is mentioned anywhere. Just as an example: I have a logical fact table with around 750 logical columns (>500 original measures & 250 derived measures). No issue whatsoever. Opening the presentation table through answers takes about 2-3 seconds (the NQSQL command has a lot to retrieve), but that's about it.
Cheers,
C.

Unable to setup fixed number of report columns based on a dynamic query

Hi guys, I need to find a way to replicate below output. Unfortunately it cannot be done using the column group feature due the fact it will create not so many rows as I need. In the below case it would create
only four columns. I need 10 columns. Basically for 100 m 6 columns would remain blank . 8 for 200 m .I'm using SRSS 2008R2
Query results:
Race Name Ranking
100m Andrew 1
100m Rachel 2
100m Chris 3
100m Drew 4
200m John 1
200m Billy 2
Report output should look like:
Race 1 2 3 4 5 6 7 8 9 10
100m Andrew Rachel Chris Drew
200m John Billy
Any suggestions?

As I understand, you want a fixed number (10) of columns and you want them whether or not there are 10 rows returned by your dataset for a given race.
What is your dataset?
What if your dataset returns 15 races of a given type? Do you want 15 columns then?
Assuming your dataset is TSQL, you can use a matrix in your report if you tweak your dataset query. First, you need to add a "default" set of data that guarantees your 10 columns. This can be done with a set of UNION statements:
UNION
SELECT '100m' AS Race, '' AS Name, 1 AS Ranking
UNION
SELECT '100m' AS Race, '' AS Name, 2 AS Ranking
UNION
SELECT '100m' AS Race, '' AS Name, 3 AS Ranking
UNION
SELECT '100m' AS Race, '' AS Name, 4 AS Ranking
UNION
SELECT '100m' AS Race, '' AS Name, 5 AS Ranking
UNION
SELECT '100m' AS Race, '' AS Name, 6 AS Ranking
UNION
SELECT '100m' AS Race, '' AS Name, 7 AS Ranking
UNION
SELECT '100m' AS Race, '' AS Name, 8 AS Ranking
UNION
SELECT '100m' AS Race, '' AS Name, 9 AS Ranking
UNION
SELECT '100m' AS Race, '' AS Name, 10 AS Ranking
This gives you the 10 columns. In the matrix, set row group to Race and column group to Ranking. Set the intersecting detail cell to:
=Max(Fields!Name.Value)
This will give you 10 columns unless you have more than 10 rows returned for a given race.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.

Max number of records in an internal table

Hi,
Can any one tell me what is the Max Number of records we can get into an internal table.
if you have any link of sap help on this please FWD.
thanks in Adv.
Regards,
Lakshmikanth.T.V

Hi lakshmikanth,
Internal Tables as Dynamic Data Objects
Internal tables are always completely specified regarding row type, key and access type. However, the number of lines is not fixed. Thus internal tables are dynamic data objects, since they can contain any number of lines of a particular type. The only restriction on the number of lines an internal table may contain are the limits of your system installation. The maximum memory that can be occupied by an internal table (including its internal administration) is 2 gigabytes. A more realistic figure is up to 500 megabytes. An additional restriction for hashed tables is that they may not contain more than 2 million entries. The line types of internal tables can be any ABAP data types - elementary, structured, or internal tables. The individual lines of an internal table are called table lines or table entries. Each component of a structured line is called a column in the internal table.
regards,
keerthi.

Finding the Max Number

Hi All,
                 I have table from which i have to find out the site and its max number.i fetch all the data in ITAB. now i am not understanding wat to do to find the max number.here is my problem...
Site              Number
1001             2
1001            1
1001            5
1001           50
1001         30
1002          1
1002          100
1002          10
now i have all this data in my ITAB and den it is printing in my alv.
now i want data to be like this...
Site            Number
1001          50
1002         100
plz tell me wat to do...as i am very new in this area.
Thanx,
Vaneet
Moderator Message: Basic Post. Put some effort of your own first.
Edited by: kishan P on Dec 10, 2010 3:42 PM

Pretty straigth forward.
Just sort the internal table by site number descending. That way you know you always have the highest number in the first record for the site.
sort itab by site number descending.
loop at itab.
at new site.
     itab2-site = itab-site.
     itab2-number = itab-number.
     append itab.
endat.
continue.
endloop.

Dynamic Number Of Data Columns

Greetings - I'm attempting to create a report that has a dynamic number of columns. The type of data in the columns varies (number, string), and I need the details to display, not a summary.
If I knew the max number of columns I'm sure I could figure out some logic to make it work, but that is not the case.
Data example:
Row 1: Name Timestamp Country Height ...
Row 2: Name Timestamp Country Weight ....
Desired report:
Hdr1-Hdr2Hdr 3-Height---Weight
Name Timestamp Country Height <blank>
Name Timestamp Country <blank> Weight
There may be a solution in a cross-tab but I will need the Name, Timestamp, Country in separate columns as this may be output as CSV.
Any assistance will be appreciated.

Generally, when you don't know the number of columns, a cross-tab is the way to go.
You can get the first three column that you stated by putting all three fields in the Rows section of the Crosstab Expert.
As for the data returned from the database, you'll want the three row fields, a "value name" field (containing value such as "Weight" and "Height"), and then a Value column with the value of the "value name" field.
HTH,
Carl

Max number of 'OR' elements in a single query?

Hi there,
I'm running on 9i and was wondering if there is any limit on the max number of elements allowable in an Or query.
i.e: column1 = value1 OR column2 = value2 OR etc.. etc..
If there is a limit, what is it?
Can it be configured?
What is a good value for performance (all columns are in the same table)?
Thanks for any input...
P Lowry

Hello,
Yes there is a limitation of elements on a BSP page.
Please read:
/people/brian.mckellar/blog/2005/04/25/bsp-programming-gen-branchoffset-limit-reached
Regards,
Dezso

Max number of part appraiser allowed for a 360d appraisal

Hi, experts,
i am trying to implement a 360 degree appraisal using OSA framework(part appraisal).
according to F1 help:
If you have selected only the Part Appraiser (PAPP) and/or Importance
Part Appraisal (PWGT) columns in an appraisal template, this is a 360°
appraisal, and the SAP system does not restrict the number of part
appraisers allowed.
in my template, only have PAPP column , but the maximun number of part appraisers allowed is still set to 18. what's wrong? it should be no limit.
i tried to create a document(using phap_create_pa) , the 18 limitation stop me to add more part appraiser.
i am so confused, does that mean we can not have a REAL 360 appraisal without limitation for part appraiser?
thanks and best regards.
Jun

hi,
i traced into the program, in funciton module
HRHAP_0DOC_MAX_NO_PART_APPER
it's quite clear, there is no special logic for 360 appraisal , the formula is always set to :
no_of_part_appraisers = ( c_column_max_number - l_total_columns )
DIV l_part_columns.
so i think it's not possible to use OSA to depict an REAL 360 appraisal without maximum appraiser limitation.
the maxi number is (18 -1) / 1 = 17
which is really a pitty...
br.
zj

Get text as 'customer number' in ALV

Hi,
My requirement is to get text as 'customer number' in ALV.
How i will get this?
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Mar 19, 2008 6:04 PM

What exactly is your need ?
If you want to change header column, generate the field catalog and change the pertinent fields (fieldcatalog-seltext*)
Look at SDN for [ALV header text|https://www.sdn.sap.com/irj/sdn/advancedsearch?query=alvheadertext&cat=sdn_all]
Regards

Max number of ALV columns

Similar Messages

Maybe you are looking for