Max # of Responses
What happens to a FormsCetnral form when the max number of responses (5,000) is reached?
Are the oldest responses simply deleted and replaced by the newer or does a new form have to be made and embedded (HTML)?
Hi,
Please see this link for more information: http://forums.adobe.com/docs/DOC-1382
hope this helps,
Thanks,
Lucia
Similar Messages
-
I need to add header in the WAD
Hi All,
I have a requirement of adding header in WAD/Bex,were there are 8 Columns to be displayed in the report as below
Response time Resolution Time
Min
Max
Average
SD
Min
Max
Average
SD
Were in Respone time time and Resolution time are Key figures.
Min,Max,Average,Standard Deviation(SD)are calculated Keyfigures in Bex query designer.
Now I have displayed each of these 8 columns as Min of Respone time | Max of Response time and so which needs to scroll to right a lot users wants the header to be diplayed as above example.
Can please anyone guide me on this,is it possible in WAD or Bex?
Thanks in advance
Preethi.Hi Preethimanj,
We can acheive this through BEx and WAD combination.
1. We need to creat two queries with different set of CKF.. one is for Response time and other is for Resoultion time.
2. In WAD use the web item TABLE with two rows and two columns., on the first row keep the headings Response time and Resolution time then on the second row keep the two queries Response time and Resoultion time respectively. ( I think you are getting my point).
In this we can achieve this .
Hope this helps.
Veerendra. -
XML Header Web Services 8.6
I am developing an HTML application using LabVIEW Web Services in version 8.6. I configured a VI to output data as XML. I am using the jQuery framework for javacript at this time. I noticed that when I try to get the data from this VI as XML jQuery won't load load it (might be having the same issue with prototype). After running a packet capture this is what I found the data from LabVIEW to look like:
HTTP/1.1 200 OK
Date: Tue, 18 Aug 2009 13:55:03 GMT
Server: Mbedthis-Appweb/2.3.0
Cache-Control: no-cache
Content-type: text/xml
Content-length: 87
Connection: keep-alive
Keep-Alive: timeout=60000, max=98
<Response><Terminal><Name>read_buffer</Name><Value>13.509</Value></Terminal></Response>
So it seems that the <?xml version="1.0"> tag at the top of the document is not being sent out and I have to add this manually to my javascript code before it works. Is there anyway to force LabVIEW to send this out on the server side? My javascript code:
<script type="text/javascript" src="js/jquery.js"></script>
<script>
$(document).ready(function(){
$.get("../LambdaWeb/lambda/read_volts", null, function(data){
var xml = $('<?xml version="1.0" ?>' + data);
alert("Data Loaded:" + xml);
}, "xml");
</script>
Also on a side note. I know that JSON is now available in LabVIEW 2009; is there anyway to get JSON support for 8.6?
Message Edited by Pawel Kowalski on 08-18-2009 09:09 AM
Message Edited by Pawel Kowalski on 08-18-2009 09:10 AMIs there any way so that one can send data (array 'DBL' & about 60,000 elements) after converting it to a string using 'Flatten to String' function and not using 'Flatten to XML'?
Reason behind using 'Flatten to string' is the size of flattened data is much lesser that it would be in later case.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT. -
SQL Server Service Broker Updating Stored procedure
how can you update the service broker stored procedure. when i update the stored procedure the changes dont come into affect. i have tried to alter the queue, waited for all jobs to finish, but some how still the old stored procedure is running. is there any
way i can force changes to the stored procedure.
i have tried sql profiler tracing but that didnt show any changes.
I cannot alter the service broker stored procedure, when I update the stored procedure it does not show any error and successfully gets updated but the changes does not come into affect.
Is it because I need to stop the queue of the service broker on both databases before the changes could come into affect?
Note: the service broker stored procedures produce and read xmls.Presumably, this is because the procedure is executing when you alter the procedure. And if the procedure never exits, the old code will keep on running. One way to address this is to have the procedure to return if a new message has not been picked up in,
say, 1000 milliseconds.
Here is a repro to shows what I'm talking about.
------------------------------- Service Broker Objects ------------------------------------------
CREATE MESSAGE TYPE OrderRequest VALIDATION = NONE
CREATE MESSAGE TYPE OrderResponse VALIDATION = NONE
go
CREATE CONTRACT OrderContract
(OrderRequest SENT BY INITIATOR,
OrderResponse SENT BY TARGET)
go
CREATE QUEUE OrderRequests WITH STATUS = OFF
CREATE QUEUE OrderResponses WITH STATUS = ON
go
CREATE SERVICE OrderRequests ON QUEUE OrderRequests (OrderContract)
CREATE SERVICE OrderResponses ON QUEUE OrderResponses (OrderContract)
go
-- Procedure to send a message and receive a response.
CREATE PROCEDURE send_and_get_answer AS
DECLARE @handle uniqueidentifier,
@binary varbinary(MAX)
SELECT @binary = CAST (N'Kilroy was here' AS varbinary(MAX))
BEGIN DIALOG CONVERSATION @handle
FROM SERVICE OrderResponses
TO SERVICE 'OrderRequests'
ON CONTRACT OrderContract
WITH ENCRYPTION = OFF
;SEND ON CONVERSATION @handle
MESSAGE TYPE OrderRequest (@binary)
WAITFOR (RECEIVE TOP (1)
@handle = conversation_handle,
@binary = message_body
FROM OrderResponses)
SELECT cast(@binary AS nvarchar(MAX)) AS response
END CONVERSATION @handle
go
-- Procedure to process a message
CREATE PROCEDURE ProcessOrders AS
SET NOCOUNT, XACT_ABORT ON
DECLARE @DialogHandle uniqueidentifier,
@MessageType sysname,
@binarydata varbinary(MAX)
-- Get next message of the queue.
WAITFOR (
RECEIVE TOP (1) @DialogHandle = conversation_handle,
@MessageType = message_type_name,
@binarydata = message_body
FROM OrderRequests
SELECT @binarydata = CAST( reverse( CAST( @binarydata AS nvarchar(MAX) )) AS varbinary(MAX))
; SEND ON CONVERSATION @DialogHandle
MESSAGE TYPE OrderResponse (@binarydata)
END CONVERSATION @DialogHandle
go
-- Make this an activaton procedure.
ALTER QUEUE OrderRequests WITH
STATUS = ON,
ACTIVATION (STATUS = ON,
PROCEDURE_NAME = ProcessOrders,
MAX_QUEUE_READERS = 1,
EXECUTE AS OWNER)
go
-------------------------------- Send a message -------------------------------------------
EXEC send_and_get_answer
go
------------------------ Change the procedure --------------------------------
ALTER PROCEDURE ProcessOrders AS
SET NOCOUNT, XACT_ABORT ON
DECLARE @DialogHandle uniqueidentifier,
@MessageType sysname,
@binarydata varbinary(MAX)
-- Get next message of the queue.
WAITFOR (
RECEIVE TOP (1) @DialogHandle = conversation_handle,
@MessageType = message_type_name,
@binarydata = message_body
FROM OrderRequests
SELECT @binarydata = CAST( upper( CAST( @binarydata AS nvarchar(MAX) )) AS varbinary(MAX))
; SEND ON CONVERSATION @DialogHandle
MESSAGE TYPE OrderResponse (@binarydata)
END CONVERSATION @DialogHandle
go
-------------------------------- Send new message -------------------------------------------
EXEC send_and_get_answer -- Still produces a message in reverse.
EXEC send_and_get_answer -- Now we get the expected result.
go
DROP SERVICE OrderRequests
DROP SERVICE OrderResponses
DROP QUEUE OrderRequests
DROP QUEUE OrderResponses
DROP PROCEDURE ProcessOrders
DROP PROCEDURE send_and_get_answer
DROP CONTRACT OrderContract
DROP MESSAGE TYPE OrderRequest
DROP MESSAGE TYPE OrderResponse
go
Erland Sommarskog, SQL Server MVP, [email protected] -
Hello gurus,
I have done generic extraction on table OSMON,
the feild which i have included in are,
SERVER(Server name)
1,ADATE(Date of analysis)
2,CPUMAX(Max. CPU usage for 1 day (percent), av. value for 1 hour)
3,CPUAVG(Av. CPU usage in percent)
4,PAGEINMAX(Memory paged in (KB), maximum for 1 day, av. value 1 hour)
5,PAGINAVG(KB paged in, av. value for 1 day)
6,DRESPMAX(Max.disk response time (ms) for 1 day, av.value for 1 hour)
7,DRESPAVG(Av.disk response time (ms) for 1 day, av.value for 1 hour)
8,CPUUSRAVG(User CPU utilization in percent)
9,CPUSYSAVG(CPU system utilization in percent)
10,CPUIDEAVG(Idle CPU time in percent).
and I have to make it as delta,and for this have taken ADATE object for delta,
my question is am i right to take delta on Date object or should i go for another object and why.
as my requirement is to show in BW report how much USER are utilizing system.
Help me on this
Thanks & Regards,Hi,
from 'how to generic delta' doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
Implementation of a Generic DS with Delta.
1.The system does not handle the delta mechanism by itself. You will have to implement it in your function module.
2. To enable delta, you will have to define a delta identifier.
3. Sure, the generic extractor on an infoset works correctly, if you had declared the timestamp as delta identifier.
The 3 options given there indicates the type of the field which indicates change. "material Number" is wron this field wont give you when the material changed. select changed at or some other field. and specify the field type is it a date field or time stamp.
Only 3 field types timestamp,date and Numeric Pointer can be used for delta.
You would choose a field which captures the time when the record was changed/inserted. That is what is referred to as time-stamp field.
The timestamp field is in format YYYYMMDDTHH:MM:SS(+/-)HH:MM -
PCI-6013 intermitant bad counts good after hardware reset
I am using a PCI-6013 board to two edge separation counting into 10 bins over 1 second. Most of the time the counter works great but some of the time I get garbage data eg 0,6050955,6050951,0,6050944,6050954,0,6051007,0,6050951. The counts are coming from a PMT that has a max linear response of 1,000,000 counts per second. Each data point represents 100ms of counting. Powering the PMT off and then on has no effect. After restarting my program the reponse returns to normal until the counts freak out again maybe 20 minutes later. Does any one have any ideas why this is happening?
What two signals are your trying to perform a two edge separation measurement on? What do you mean by bins? What language are you doing this in and can you post your code?
Matt
Applications Engineer
National Instruments -
Hi All,
Wer are facing very serious performance issues with one of our apps server.......at the time when system was behaving slow ....I am sharing the various parameter values -:
app server is on windows platform
CPU
User %: 9
system%: 1
idle%: 89
system calls 9113
Interrupts: 528
memory
physical mem avail: 16604440 kb
page in/s 0
page out/s 15
SWAP
COMMIT CHARGE LIMIT (kb) 65145060
COMMIT CHARGE FREE (kb) 32083152
max swap space :49152000
actual swap space: 49152000
LAN
Packets in/s : 2140
Packets out/s : 1507
At this point of time report which was taking max dialog response time:
ZLOGTRPL :90268 (ms) dialog response time
There is there anything which could be the cause of slowness.......
but same time overall dialog response was showing around >95227(approx)
idealy this value should be less that 1200
In st02:
swap for export/import is coming in red mark with value > 100000
Regards,
Prashant
Edited by: Prashant Shukla on Sep 16, 2008 4:13 AMDear Prashant,
It seems you are facing this problem since long time and we even discussed on this few days back.
I asked you to open a customer message to SAP.Is there any problem with that?
Whats they say?
Regards,
Ashutosh -
IGMP on 891 running 15.4(3)M1
Are there any special tricks to get IGMP running on an 891?
I've done some packet captures and the workstations are sending IGMP reports for their interested streams.
However the router never adds it to the IGMP group list.
IGMP is enabled on the interface as is snooping.
Interestingly .. PIM works fine I can see local multicast senders in my mroute table .
And mutlicasdt to the workstations work if I hard-code a icmp join-group or static-group on my LAN interface on the router.
interface GigabitEthernet8
ip address 10.x.x.2 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip pim sparse-mode
duplex auto
speed auto
891F#sh ip igmp groups
IGMP Connected Group Membership
Group Address Interface Uptime Expires Last Reporter Group Accounted
224.0.1.40 GigabitEthernet8 22:16:55 00:02:45 10.69.254.2
891F#sh ip igmp interface g8
Load for five secs: 10%/3%; one minute: 10%; five minutes: 10%
Time source is NTP, 19:25:37.138 EST Wed Jan 28 2015
GigabitEthernet8 is up, line protocol is up
Internet address is 10.s.x.2/24
IGMP is enabled on interface
Current IGMP host version is 2
Current IGMP router version is 2
IGMP query interval is 60 seconds
IGMP configured query interval is 60 seconds
IGMP querier timeout is 120 seconds
IGMP configured querier timeout is 120 seconds
IGMP max query response time is 10 seconds
Last member query count is 2
Last member query response interval is 1000 ms
Inbound IGMP access group is not set
IGMP activity: 1 joins, 0 leaves
Multicast routing is enabled on interface
Multicast TTL threshold is 0
Multicast designated router (DR) is 10.69.254.2 (this system)
IGMP querying router is 10.x.x.2 (this system)
Multicast groups joined by this system (number of users):
224.0.1.40(1)
891F#sh ip mroute 239.193.128.1
IP Multicast Routing Table
Outgoing interface flags: H - Hardware switched, A - Assert winner, p - PIM Join
Timers: Uptime/Expires
Interface state: Interface, Next-Hop or VCD, State/Mode
(*, 239.193.128.1), 00:02:03/stopped, RP 10.255.255.252, flags: SPF
Incoming interface: Tunnel10, RPF nbr 10.69.1.1
Outgoing interface list: Null
(10.69.254.10, 239.193.128.1), 00:02:03/00:02:56, flags: PFT
Incoming interface: GigabitEthernet8, RPF nbr 0.0.0.0
Outgoing interface list: Null
Attached WIreshak screenshot showing that the IGMP report is being sent on the newtworkHi Wes,
Check for "ip option drop" in your global config. This will stop the IGMP snooping process from passing the join to the IGMP sub-process. This is why we are not building an OIL in your ip mroute. Remove the config and test your multicast application. This should build the correct OIL and allow multicast to flow now.
-Denny -
I have some question and iwant to clear it.
i am acquirig data from a flow meter it is giving current that i changed to volt by inserting resistor that ranges from 0 to 5 volts. it should be DC voltage i want to know how should i set the sapmling rate of this signal becaz according to theorm it should be twice the maximum frequecy but in this case it is DC voltage.my programming is doing fine it gives me the correct reading that i can check with tthe reading on flow meter.
my second question is where is sampling rate given i am using config.vi,AI.vi and Read.vi i am usingdefat values and in AI start .vi .further mmy data acquistion loop is executing at 1 sec should it bother to acquire data if yes what should i do.
my third question i read article about data sampling it says if sampling frequency is not correct than there could be data clipping how can i know my data is clipped becaz to myunderstanding this should be done by DAQ card,Iam usin g NI card E series.Of course the Nyquist theorem rather applies to AC voltages with given frequencies. On the other hand, what you want to measure probably is NOT pure DC current. If there were no changes in current there would be no need to measure them, right?
So there probably will be changes in DC current output of your flowmeter. You should check the manufacturer's data sheet for max frequency response or rise time of output signal, and set your sampling rate accordingly. However, you should do some oversampling to reduce the influence of noise and erratic readings. -
In the free plan it says
Max # of responses
50 per form
is it only 50 or is it 50 per month?Hi;
It is "50 in the View Responses tab at a time", as you approach the limit you can export responses and delete so that you can continue to collect more responses. There is no overall limit, just a limit on how many you can have in the View Responses table.
Thanks,
Josh -
Hi
I'm making a responsive Edge animate scene, which has a Vimeo video embedded inside, and will have images animated in front of and behind the video player for added wow actors. So far so good...
The problem is I would like the player to remain at a fixed scale (500 x 281) ...
Once that's working I'd like to also control over a few images in the scene as to whether they're responsive or not.
I've tried setting a Min and Max width to my container in which the Vimeo Embed code is being run but they don't stop the rectangle scaling at all.
Here's my example test project:
Dropbox - Edge02.zip
I'm adding the final code to Wordpress using the Wordpress plugin called 'Edge Suite' (Developer version) which is mentioned in an Adobe tutorial.
Also for reference.
Here's a site who have achieved exactly what I looking to do... Notice how the boatson the foreground layer are on a fixed scale and position. The embedded vimeo video a fixed scale but always centered. The mountains fully responsive position.
Any ideas on how they've implemented this are welcome...but obviously understand if that is beyond the scope of the Adobe forum.Ok I see we can't post weblink... handy...
The website I referred to that has achieved this is Kasra Design.
You don't need to look at it to help, just point in the right direction to stop an individual object being responsive. -
ISE max-login-ignore-identity-response
Hi forumers'
Greeting, I had a question regarding ISE login identity response.
In my POC deployment, i'm using a single testing domain user account at the testing Active Directory. I able to login to the testing's secure network using the same user credential over normal workstation and handheld device (Ex: iphone, ipad etc), SIMUTANEOUSLY.
How do i can strengthen the authorization policy where
1. ISE max-login identity response only allow to 2 concurrent connectivity on maximum one user per workstation and/or handheld device.
example:
AD user-A conencting to 1 unit of workstation and 1 unit of iPhone at the same time. If user-A trying to connect another iPad this time should make the connection fail.
Can i fine tune and strengthen on this, thanks
NoelI have had the same issue, the fault is caused by the time zone in the sponsor groups being set by default to UTC, so if you are in London the accounts wont become available until UTC time. The best practice is to add a local time zone and remove UTC at initial configuration
To resolve this create a new local time zone in Guest Access>Settings>Guest Locations and SSIDs then under Guest Access>Configure>Sponsor Groups amend the time zone properties in each sponsor group
One other problem is if you do not remove this at initial configuration you don't seem to be able to get rid of UTC, not really an issue unless you forget when creating new sponsor groups -
Hi all,
I have just configured ACE 4720 and started heavy test from a single source host to the group of http servers. All works fine and mean response time during all test is good (about 0.2 sec) but max response time grows from about 0.4 sec. to the 3 sec. after 30 sec the test starts and sometimes up to the 6 or 9 sec. How do I fix this?Try to check "sh resource usage all" to see if there is "Denied" count incrementing. It could be resource issue.
-
Difference between max response time of operation and service.
Hi All,
I am using ALSB to implement SOA.While monitoring the statistics for a proxy service based on WSDL (web service) ,noticed one thing that max response time of a service operation is different than max response time for that particular service.E.g max response time for one of the operation is 3462 (ms) where as max response time for that service was 4467 (ms).
Can any one help me to identify why there is difference between these two?I have also noticed this inconsistence. There is probably no explanation in OSB (ALSB) documentation, so I can only guess. Maybe OSB starts to measure response time for service earlier then for an operation. The reason for that could be that OSB can identify service (based on endpoint) earlier then operation (based on request data which have to be parsed first). This could cause a difference in response times. However, this difference should be much smaller than a second (your case). In my case it is usually a matter of few milliseconds.
Please remember that all of above is just my imagination. :-) -
WSMA Max Response time out issue ?
Hi,
I am requsting an mediatrace command from the application to router via WSMA.During that I gotta error "Max Response time 10 seconds exceed"
For that I dont find listener schema for setting the timeout event.In some article I found MaxWait is the tag where we can set timeout value.But could not find the tag in our schema ? Anyone please tell me how to fix this ?Finally I found it myself .... Actually maxWait is the attribute of execCLI tag . That works well
This link is really helpfull : http://developer.cisco.com/c/document_library/get_file?groupId=103519&folderId=2303210&name=DLFE-69112.pdf
Maybe you are looking for
-
IPhone not syncing with iTunes
I check all the correct boxes in itunes on my lap top when my iPhone is connected, the capacity bar shows the extent of the data to be synced including about 20G's of audio, but when the sync is completed the capacity bar in iTunes shows no memory us
-
My HP Mini has a setting called Splashtop or QuickWeb where I can just start using the internet without loading all of the windows software, however my homepage has recently started showing a message that my firefox browser is outdate and may be pron
-
Custom scripts not working in Illustrator CC (2014)
A couple of custom scripts that are part of my workflow don't work in the new CC; MultiExporter.jsx and Sprite CSS Generator.jsx. When I try to run either a titled modal window comes up as if the script is running but the actual window is only a coup
-
Even after consolidating, itunes library does not mirror music folder
i copied my itunes music folder from my old harddrive to my new computer. some of the songs in the library are not in the music folder. how could this be if i copied the folder? is there a way to make them exactly alike? is it even important for them
-
hi all, I have tried to set f4 help in the particular field in Ztable . My requirement is whenever i enter the value in field (Ztable) via table entries in databrowser i need f4 help. I know there is oneway to get this to set foreign key. but,I have