Maximum Columns in ALV in Display and Hidden?

Hi,
Do anyone know how many number of columns that able to show in ALV report and also how many columns that ALV able to hide it?
As did i search and I found:
Re: columns in alv
but some said max is 90 and other max 254 columns?
Is there any document on this ALV function on max of columns in hide and displaying?
Cheers,
Aish

hi,
there is no such documnet.
but the maximun no.of.columns that an alv report can show is 90.
\[removed by moderator\]
Reddy.
Edited by: Jan Stallkamp on Sep 3, 2008 6:17 PM

Similar Messages

  • Maximum number of character we can print in a column uing ALV grid display

    Hi frnds,
    My requirment is to print 500 charcter data in a column using ALV grid display.
    Could any body tell me is it possible and the maximum character it can i print in a column using ALV grid dispaly.
    Regards,
    Sandipan

    Hi Sandipan,
    refer notes 857823, 910300 and 959775. All these say there is a limitation of 128 characters.
    857823 - ALV grid: Strings with a maximum of 128 characters
    Symptom
    Entries in cells of the type CHAR or string are truncated after 128
    characters in the SAP GUI.
    also refer,
    ALV Grid Control (cl_gui_alv_grid), function module (Full-screen) Grid
    (Reuse_alv_grid_display, SAPLSLVC_FULLSCREEN), SAPGUI, back end, front end
    Cause and Prerequisites
    The data table that is sent to the front end only allows character values
    with the length 128.
    Solution
    This is the standard system behavior and cannot be changed.

  • Want to display more than 300 charcters in a column using ALV grid display

    Hi Guru's,
    I am trying to display more than 500 charcters in a column using alv grid display but it in the output it is showing only 128 characters. Can you help me to display all the characters in particular column Or is there any limitation in maximum of no of charcters for a column?
    Thanks,
    Radha.

    Hi Paurl,
    Define a work area say
    wa_layout type slis_layout_alv.
    then fill this work area as
    wa_layout-zebra = X
    wa_layout-colwidth_optimize = X.
    wa_layout-max_linesize = 300.
    Then in FM 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    is_layout = wa_layout
    etc.
    you provided this for the field which is displayed in alv grid will have more than 128 characters.
    from this code i want,how it refers to particular field.
    when i mentioned field catalog-OUTPUTLEN = '300'.
    it is not displayed the field morethan 128 characters.
    it only displays 128 characters.
    please provide me clear and breif information with suitable code.
    i am trying what your sending but it is not displayed more than 128 characters.
    if you don't mind please spend for me some time for this and
    give me clear and breif information with suitable code.
    Thanks & Regards,
    Radhakrishna.

  • Dynamically assign value to a column in ALV LIST Display

    Hi all,
    How can I dynamically assign value to a column in ALV LIST Display without using classes and methods?
    Thanks,
    Ridhima

    Hi Vikranth,
    I am displaying one ALV list say with columns A and B.
    I have value in A but not in B. Now at runtime user selects one row, clicks on push button in application toolbar, then i have to display value in column B in the already displayed list.
    I searched and came to know it can be done with oops concept. but i am not using classes and methods.
    so how can i do this?
    Thanks,
    Ridhima.

  • How to insert the checkbox as a separate column  in alv grid display

    Hi
    How to insert the checkboxes as a separate column  in alv grid display with using the reuse_alv_fieldcatlog_mege.
    example
    matnr    maktx  ersda                 checkbox
    10        books  28/03/2009          checkbox
    Thanks
    chinnu

    Hi,
        Check the following code.
    TYPE-POOLS: slis.
    TYPES:
          BEGIN OF ty_output,
          chk TYPE c,
          number TYPE i,
          name(20) TYPE c,
          END OF ty_output.
    DATA: gt_output TYPE STANDARD TABLE OF ty_output,
          gs_output TYPE ty_output.
    DATA: wa_layout           TYPE slis_layout_alv.
    DATA: it_fieldcatalog TYPE slis_t_fieldcat_alv,
    After you populate the data, build the field catlog like shown below.
    wa_fieldcatalog TYPE slis_fieldcat_alv.
    wa_fieldcatalog-fieldname = 'CHK'.
      wa_fieldcatalog-outputlen = '3'.
      wa_fieldcatalog-col_pos = '1'.
      wa_fieldcatalog-seltext_m   = 'CHK'.
      wa_fieldcatalog-checkbox = 'X'.
      wa_fieldcatalog-edit = 'X'.
      APPEND  wa_fieldcatalog TO it_fieldcatalog.
    wa_fieldcatalog-fieldname = 'NUMBER'.
      wa_fieldcatalog-outputlen = '10'.
      wa_fieldcatalog-col_pos = '2'.
      wa_fieldcatalog-seltext_m   = 'NUMBER'.
      APPEND  wa_fieldcatalog TO it_fieldcatalog.
      CLEAR  wa_fieldcatalog.
      wa_fieldcatalog-fieldname = 'NAME'.
      wa_fieldcatalog-outputlen = '10'.
      wa_fieldcatalog-col_pos = '3'.
      wa_fieldcatalog-seltext_m   = 'NAME'.
      APPEND  wa_fieldcatalog TO it_fieldcatalog.
      CLEAR  wa_fieldcatalog.
      wa_layout-box_fieldname     = 'CHK' .
      wa_layout-box_tabname       = 'GT_OUTPUT' .
    Now call the FM
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
    *   I_INTERFACE_CHECK                 = ' '
    *   I_BYPASSING_BUFFER                = ' '
    *   I_BUFFER_ACTIVE                   = ' '
          i_callback_program                = sy-repid
          i_callback_pf_status_set          = 'PF_STATUS'
          i_callback_user_command           = 'USER_COMMAND_GRID'
    *   I_CALLBACK_TOP_OF_PAGE            = ' '
    *   I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
    *   I_CALLBACK_HTML_END_OF_LIST       = ' '
    *   I_STRUCTURE_NAME                  =
    *   I_BACKGROUND_ID                   = ' '
    *   I_GRID_TITLE                      =
    *   I_GRID_SETTINGS                   =
          is_layout                         = wa_layout
          it_fieldcat                       = it_fieldcatalog
    *   IT_EXCLUDING                      =
    *   IT_SPECIAL_GROUPS                 =
    *   IT_SORT                           =
    *   IT_FILTER                         =
    *   IS_SEL_HIDE                       =
    *   I_DEFAULT                         = 'X'
    *   I_SAVE                            = ' '
    *   IS_VARIANT                        =
    *   IT_EVENTS                         =
    *   IT_EVENT_EXIT                     =
    *   IS_PRINT                          =
    *   IS_REPREP_ID                      =
    *   I_SCREEN_START_COLUMN             = 0
    *   I_SCREEN_START_LINE               = 0
    *   I_SCREEN_END_COLUMN               = 0
    *   I_SCREEN_END_LINE                 = 0
    *   IT_ALV_GRAPHICS                   =
    *   IT_HYPERLINK                      =
    *   IT_ADD_FIELDCAT                   =
    *   IT_EXCEPT_QINFO                   =
    *   I_HTML_HEIGHT_TOP                 =
    *   I_HTML_HEIGHT_END                 =
    * IMPORTING
    *   E_EXIT_CAUSED_BY_CALLER           =
    *   ES_EXIT_CAUSED_BY_USER            =
        TABLES
          t_outtab                          = gt_output
    * EXCEPTIONS
    *   PROGRAM_ERROR                     = 1
    *   OTHERS                            = 2
      IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.

  • Max number of columns in Alv grid display.

    Is there any limitation on number of fields that can be displayed using alv grid display.
    Please tell how i can display 199 fields using ALV.
    Thanks in advance.

    I am not sure of the maximum of columns possible.
    If you see the col_pos field in the field catalog table it can have only 2 digits. so i would assume it would be only 99 columns, but not sure.
    Would get you more information soon.
    Thanks,
    Balaji

  • Sub columns in alv grid display

    hi everyone,
        can anyone tell me the way in which we can include sub-column headings in alv grid display. i.e., for example as shown below.
        column1             column2              column3 
    scol1   scol2         scol3   scol4        scol5   scol6........................
    thanks in advance. Here we are generating the column headings by using fm field catalog merge.
    regards,
    rajsekhar.k

    check this thread, check the sample code in my post
    Re: multiple headers in ALV.

  • Split columns in ALV Grid Display.

    Hi
    Currently we are displaying the output as below :
    currently :
    Docid | Created | Posted |
          |          |      |
    Needed :
    Docid     |     Created     |     Posted     |
             |X1     |X2     |X3     |X4     |
         |     |     |     |     |
    now some columns have to be splitted as above like Created is splitted into X1 and X2, Posted into X3 and X4 .I am using Set_table for_first_display method to display the current result, so is there any option in the method that can split the columns into two .
    Edited by: Varun on Jan 27, 2011 7:30 PM
    Edited by: Varun on Jan 29, 2011 2:25 PM

    I am not sure of the maximum of columns possible.
    If you see the col_pos field in the field catalog table it can have only 2 digits. so i would assume it would be only 99 columns, but not sure.
    Would get you more information soon.
    Thanks,
    Balaji

  • Display one or more rows for a particular column in alv grid display

    Hi,
    My requirement in the report is to display users for a particular workitem id.If a workitem is in the inbox of one or more users(approvers) i have to display all the user names in one field in alv grid output (output-approver id).There are other fields which display details of the workitem also.
    Is there a way to populate multiple rows for a single column or creating one more internal table for users in the alv output table.
    Please suggest.
    regards,
    Sravanthi Chilal

    ALV only can show flat internal table data.
    you should set a sort on the field which you want to show only once.
    Then on the output of the ALV, the field with the same value will show only once.

  • How to print check box in ALV list display and how to pick selected ones

    Hi
    i am displaying one ALV list dispaly. for that im adding one check box fields by filling the fieldcat as below:
      wa_fldcat-checkbox = 'X'.
      wa_fldcat-edit = 'X'.
    but the check box is showing disable mode only. i want to display that check box and if i select that check box i want pick that records. for ALV grid i found one FM to pick records of selectedones as below.
    DATA ref_grid TYPE REF TO cl_gui_alv_grid.
      IF ref_grid IS INITIAL.
        CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
          IMPORTING
            e_grid = ref_grid.
      ENDIF.
      IF ref_grid IS NOT INITIAL.
        CALL METHOD ref_grid->check_changed_data.
      ENDIF.
    but how can i do for list display to pick those selected one records.
    Can any one sugget regarding this.
    Thanks in advance.
    Rahul.

    Hi,
    Thanks. now it's enabled. but how can we pick the records from that list whichever i selected through that check box.
    i found this one for ALV grid:
    DATA ref_grid TYPE REF TO cl_gui_alv_grid.
      IF ref_grid IS INITIAL.
        CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
          IMPORTING
            e_grid = ref_grid.
      ENDIF.
      IF ref_grid IS NOT INITIAL.
        CALL METHOD ref_grid->check_changed_data.
      ENDIF.
    but how for ALV normal list display.
    Thanks.
    rahul

  • ALV GRID DISPLAY and a Parameter entry in the same screen how ?

    Hi,
    I am newbie to ABAP and I am trying to figure out ways to display an ALV grid along with the parameter field into which the user enters his/ her values in the same screen.To be clear,  when I have a parameter type specified, my screen just lets me display that one field into which the user is asked to enter a value but I want to display the table as well as the user input field in the same screen.
    Any help would be appreciated.
    Thanks a lot. I appreciate that.
    -V

    Hi,
    I think the easiest way to do that is by means of docking container . I will assume you are using selection-screen, but you can also achieve that with normal screen.
    - first you need to place your field in selection screen which I believe you already have
    - now during AT SELECTION-SCREEN OUTPUT you check if something is entred to that field
    - if so you create instance of docking container (docking it at left hand side) then inside you place you alv with selected data for that field value
    So the code which fulfils that would be
    PARAMETERS pa_carr TYPE scarr-carrid.
    DATA: gr_dock_cont TYPE REF TO cl_gui_docking_container,
          gr_alv       TYPE REF TO cl_gui_alv_grid.
    DATA: it_spfli     TYPE TABLE OF spfli.
    AT SELECTION-SCREEN OUTPUT.
      IF pa_carr IS NOT INITIAL.
        SELECT * FROM spfli INTO TABLE it_spfli UP TO 10 ROWS
                                                WHERE carrid = pa_carr .
        IF gr_dock_cont IS NOT BOUND.
          CREATE OBJECT gr_dock_cont
            EXPORTING
              side                        = cl_gui_docking_container=>dock_at_left
              extension                   = 500.
          CREATE OBJECT gr_alv
            EXPORTING
              i_parent          = gr_dock_cont.
          CALL METHOD gr_alv->set_table_for_first_display
            EXPORTING
              i_structure_name = 'SPFLI'
            CHANGING
              it_outtab        = it_spfli.
        ELSE.
          CALL METHOD gr_alv->refresh_table_display.
        ENDIF.
      ENDIF.
    Regards
    Marcin

  • Calculating Totals for a column in ALV Grid Display

    Hi All,
      I frustrated with the problem of simple calculating total for a column. I wrote the following code:
      LW_CATALOG-TABNAME   = P_GV_STRUCT.
      LW_CATALOG-FIELDNAME = 'ZSUMMS'.
      LW_CATALOG-DO_SUM    = GC_X.
      APPEND LW_CATALOG TO G_FIELDCAT_TAB.
      CLEAR LW_CATALOG.
    It is not working. Could you please suggest the solution?
    It would be great help to me.
    Advanced Thanks,
    Phani Kumar

    Phani,
    Did u try playing around with any of these layout fields ?
    no_sumchoice(1),       " no choice for summing up
    no_totalline(1),       " no total line
    no_subchoice(1),       " no choice for subtotals
    no_subtotals(1),       " no subtotals possible
    no_unit_splitting  " no sep. tot.lines by inh.units
    totals_before_items,   " diplay totals before the items
    totals_only(1),        " show only totals
    totals_text(60) ,      " text for 1st col. in total line
    subtotals_text(60) ,    " text for 1st col. in subtotals
    b. Addtionally... not a solution.. but u know...
    just try the same code iwth reuse_alv_list_display and see if the total gets displayed properly ?

  • REGARDING ALV BLOCK DISPLAY AND GRID DISPLAY

    HI FRIENDS,
    I HAVE A TROUBLE IN DISPLAYNG TWO TABLES TOGETHER IN THE GRID DISPLAY, BUT I CAN DISPLAY USING BLOCKS. I DONT WANT TO  USE JOIN STATEMENT IN THE SELECT QUERY.
    HELP WITH BY DISPLAYING THE RESPECTIVE CODES FOR THAT.
    THANK U IN ADVANCE

    hi,
    type-pools  : slis,icon.
    data : gd_repid like sy-repid.
    data : d_fieldcat type slis_t_fieldcat_alv,
              d_fieldcat_wa type slis_fieldcat_alv.
    data : begin of itab_mara occurs 0,
             matnr like mara-matnr,
             ernam like mara-ernam,
            end of itab_mara.
    data : begin of itab_marc occurs 0,
             matnr like marc-matnr,
             werks like marc-werks,
             end of itab_marc.
    data : begin of itab_final occurs 0,
              matnr like mara-matnr,
              ernam like mara-ernam,
              werks like marc-werks,
              end of itab_final.
    gd_repid = sy-repid.
    loop at itab_emp.
    itab_final-matnr = itab_emp-matnr.
    itab_final-ernam = itab_emp-ernam.
    append itab_emp.
    clear itab_emp.
    endloop.
    d_fieldcat_wa-fieldname = 'MATNR'.
    d_fieldcat_wa-seltext_l = 'material number'.
    d_fieldcat_wa-col_pos = 1.
    append d_fieldcat_wa to d_fieldcat.
    clear d_fieldcat_wa.
    d_fieldcat_wa-fieldname = 'ERNAM'.
    d_fieldcat_wa-seltext_l = 'created by'.
    d_fieldcat_wa-col_pos = 2.
    append d_fieldcat_wa to d_fieldcat.
    clear d_fieldcat_wa.
    d_fieldcat_wa-fieldname = 'WERKS'.
    d_fieldcat_wa-seltext_l = 'plant number'.
    d_fieldcat_wa-col_pos = 1.
    append d_fieldcat_wa to d_fieldcat.
    clear d_fieldcat_wa.
    call function module 'REUSE_ALV_GRID_DISPLAY'.
    Reward with points if helpful.

  • ALV grid display the subtotal not getting for one column at the output

    Hi,
    I am working one report ALV grid display and subtotal is not getting for one paricular coulumn.
    Eventhough that column has some values.
    So can anyone give the proper solution.
    Waiting quick response.
    Best Regards,
    Bansi

    Hi
    see this link .
    https://wiki.sdn.sap.com/wiki/display/ABAP/SUBTOTALinALV
    or try this program.
    REPORT zalv.
    DATA:
    t_sflight TYPE TABLE OF sflight,
    fs_sflight TYPE sflight.
    DATA:
    r_container TYPE REF TO cl_gui_custom_container,
    r_grid TYPE REF TO cl_gui_alv_grid.
    *FIELD CATALOG
    DATA:
    t_fcat TYPE lvc_t_fcat,
    fs_fcat TYPE lvc_s_fcat.
    *SORTING THE BASIC LIST
    DATA:
    t_sort TYPE lvc_t_sort,
    fs_sort TYPE lvc_s_sort.
    fs_fcat-fieldname = 'PRICE'.
    fs_fcat-do_sum = 'X'.
    APPEND fs_fcat TO t_fcat.
    fs_sort-spos ='1'.
    fs_sort-fieldname = 'CARRID'.
    fs_sort-down = 'X'.
    fs_sort-group = '*'.
    fs_sort-subtot = 'X'.
    APPEND fs_sort TO t_sort.
    SELECT * FROM sflight INTO TABLE t_sflight.
    CALL SCREEN 100.
    *& Module STATUS_0100 OUTPUT
    MODULE status_0100 OUTPUT.
    SET PF-STATUS 'SCREEN1'.
    SET TITLEBAR 'TITLE1'.ENDMODULE. " STATUS_0100 OUTPUT
    *& Module USER_COMMAND_0100 INPUT
    MODULE user_command_0100 INPUT.
    CASE sy-ucomm.
    WHEN 'BACK'.
    LEAVE TO SCREEN 0.
    ENDCASE.
    ENDMODULE. " USER_COMMAND_0100 INPUT
    **& Module HANDLER OUTPUT
    MODULE list OUTPUT.
    CREATE OBJECT r_container
    EXPORTING
    container_name = 'CONTAINER'.
    CREATE OBJECT r_grid
    EXPORTING
    i_parent = r_container.
    CALL METHOD r_grid->set_table_for_first_display
    EXPORTING
    i_structure_name = 'SFLIGHT'
    CHANGING
    it_fieldcatalog = t_fcat
    it_outtab = t_sflight
    it_sort = t_sort.
    ENDMODULE. "list OUTPUT
    Regards
    Hareesh Menon

  • Hide columns in report on screen and display all in excel

    I am very new to this application. Can anyone please tell me how to hide certain columns on the screen display and dump everything in excel.
    Right now if I uncheck show for some columns in report attributes, it's not displayed in excel either. I would appreciate any help on this.
    Thanks

    I am very new to this application. Can anyone please tell me how to hide certain >>columns on the screen display and dump everything in excel.
    Right now if I uncheck show for some columns in report attributes, it's not displayed in >>excel either. I would appreciate any help on this.Use htmldb_application.g_excel_format method.
    for the items that you dont want in the report but want in CSV, just select that item and in its conditional display select PL/SQl expression and put htmldb_application.g_excel_format.
    for items you want in report but not in CSV put - not htmldb_application.g_excel_format.
    Else for columns that you want both in report and CSV, keep it blank.
    Hope it helps.
    Ameya.

Maybe you are looking for