Maximum font size?
I am unable to get text larger than fontSize=127 with Flex.
This limitation doesn't exist in Flash, what am I missing with
Flex? This is a pretty huge problem for what I was doing.
The whole text/font system seems to be lacking. Many font
families don't seem to render with flex and default to one of the
serif/san-serif fonts. Several fonts suffer from clipping at the
end when fontStyle=italic. Neither the case in Flash.
Thanks
Hi,
Did any of you two got a confirmation that this is a
limitation in Flex?
I seem to be having the same problem, and since our interface
design requires a font size of 152 pixels, this looks like a
serious problem for us.
Regards,
Arjan
Similar Messages
-
Maximum font size for auto-sized form text
You need to let the user select a maximum font size for automatically sized text. If most of your fields are set at 10pt type, but you have one field for which you want the text to resize automatically, it looks stupid if that cell contains a small amount of text that’s set at 16pt or whatever. If you could set the maximum font size to 10pt for that field, then the text would be consistent with the text in the other fields unless there is so much text that it needs to scale down.
Can anyone please advise?
Cheers -
Is there a way that I can set the maximum font size? I want to limit the size of all fonts.
I found tinkertool, which did exactly what I wanted. I love it.
http://www.bresink.com/osx/0TinkerTool/download.php5 -
Maximum font size in a finder window
Hello,
I'm trying to increase the font size in ONE finder window, so that my wife with decreased mobility can read the text on a TV screen.
In view options, the maximum is 16 pt. Is there any way to increase this? I do not want to increase the size in other windows.AFAICT, no. You could try lowering the display's resolution and see if that'll help. Alternatively, turn zoom on in Universal Access prefPane, zoom, and see if that works.
-
Okay, I have a JTextField with wrap on. It's setEditable(false). The string in it is going to be changing constantly and the field has a fixed size. I'm trying to come up with a method that will determine the maximum sized font that will be able to fit in the TextField without requiring a ScrollPane.
I'm not quite sure where to start on this one. I'm sure I can come up with a calculation involving font point size and FontMetrics.stringWidth() but I can't figure it out. Any ideas would be helpful.hi
* Computes a correct font size to use for the text of this component.
private void computeFontSize()
int height = getSize().height;
int width = getSize().width;
if (current_font != null) //this will be the font the component is currently showing
// need to create a brand new Font everytime to see if the
// stringWidth fits into our current width.
// We can check height by pixels, but sadly need to create a new font
// for checking the width.
Font tempFont = new Font(current_font.getName(), current_font.getStyle(), height);
FontMetrics fm = getFontMetrics(tempFont);
if (fm != null)
int textWidth = fm.stringWidth(getText());
if (textWidth > getSize().width)
// Text doesn't fit horizontally; scale it down a bit.
// (stop div by zero errors)
if (textWidth < 1)
textWidth = 1;
int newFontHeight = (height * width) / textWidth;
if (newFontHeight != current_font.getSize())
current_font = new Font(current_font.getName(), current_font.getStyle(), newFontHeight);
else if (tempFont.getSize() != current_font.getSize())
current_font = tempFont;
tempFont = null;
fm = null;
}this code was taken from a homegrown label component that scales its own font based on its size.
There is enough here for you to work out what you need.
If it meets your needs, don't be shy with the dukes
nes -
Howdy all! Have a tricky question. Using LiveCycle ES 8.2
Working on a form, I've got a pair of linked text fields (global data linked).
These text fields are static in size, but I need the values typed into them to shrink when it fills up the visible area of the text field. I can't set the value font size to 0pt from the start. It makes the initial font size too big for the value. The font size needs to remain at 16 pt until the value fills up the field's visible area, then it needs to switch over to 0pt (hence triggering a full event).
I've tried using a full event with the following code;
this.font.size = "0pt";
But it won't fire. I wonder if there is a limitation to the what the full event can trigger. I can use the change event or even the exit event if I have to.
I've also tried a calculate event with the following script:
if (this.rawValue.length > 48) {
this.font.size = "0pt";
else {
this.font.size = "16pt";
But this did not fire as well. And yes, I have the scripting set to Javascript...not Formcalc.
Any suggestions?Hi,
Using ES3 and just a 0 font initially (with all scripting removed) I get the following, for a short name;
Which seems about the right.
And for a long name
My version of your form is here https://sites.google.com/site/livecycledesignercookbooks/home/bizcard_form.1.pdf?attredire cts=0&d=1
There have been some changes since ES8, including a default font size added to the form properties, but not sure that is a factor as the largest font used in this sample is still smaller than the default.
Is this what you are seeing?
Bruce -
Is there a way to set a text box so it keeps all the letters within the box at the maximum font size?
for example:
set a box 4x1 inch
type a 4 letter name and from the start of the first letter to the end of the last letter be 4 inches
then type an 8 letter name and from the start of the first letter to the end of the last letter be 4 inches again.
My Dymo label maker software can do this. surely illustrator can too!
if not, is there any scripts / alternatives?
Thanks!!Jamie,
Sorry, now I believe I understand.
Unless you actually need a box, you may create the text as noermal live Type, then in the Transform palette set the desired W (width) value and Ctrl/Cmd+Enter to keep proportions.
If you need a box, you may:
1) Create the Type normally;
2) In the Appearance palette flyout click Add New Fill/Stroke, depending on which kind of box you want;
3) Drag the new Fill and/or Stroke down beneath the Characters in the main Appearance palette window and set the desired Color(s) and possible Stroke Weight;
4) Effect>Convert to Shape and tick Rectangle, then set the Relative>Extra Weight/Height as desired (maybe 0), depending on how much you want it larger than the Bounding Box (you may set a positive value for Weight and 0 for Height);
5) In the Transform palette set the desired W (width) value and Ctrl/Cmd+Enter to keep proportions. -
I've multiple lined text fields in the pdf document. I want the input to be resized if it exceeds (selected auto font size in properties) but I also want the first font size to be '10 pt'.
When I select auto, it chooses the maximum font size to fit in the box, I want the upper limit to be fixed at 10 and it gets smaller if text exceeds the box size.
How can I do that ?
Acrobat Professional XIFor multiline text fields, it seems the initial size is 12 when the font size is set to Auto. You don't have control over this, unfortunately.
-
How to change font size, maximum column size in the result screen ?
hi All
That's great when using SQL Dev.
But I also have a trouble that how to change font size, maximum column size in the result screen ?
My users think that font in result screen is shown very small, and whenever the data in each colum is long then it's not shown full data in column, they must double click for extend the size. Have the option to default the max size for showing full data in each column ? I try but still not to do that .
Appreciate for anyone to help us.
Thanks all.
SigmasvnYou can't change the font for the results screen yet, however you will be able to select an auto-fit option for selected columns, so if some columns have slitghtly wider text you'll be able to set the column widths to handle these wider columns.
Also, there s the option of switching the layout of a record in the grid.
Sue -
The new update has screwed up my browser settings, I cannot get them fixed and Im pissed because my computer is an eye-sore to read until this is fixed! EVERYTHING in the browser is smaller, fonts, menus, icons, web page content, pictures, tables, etc. I have set the minimum font in the settings and the text is just to a point where it is easily readable at the maximum size setting, but all the menus and icons are still tiny and hard to read. The last version I had installed worked fine with no add-ons needed. Everything fit the screen fine and was easily readable without modification. I want this version off my PC and I want the last version I had back on but I dont know what version it was!!!!!!! ARARGGGG
In fact, this stupid troubleshooting window that I am in filling out this form doesnt fit the page right at all, and edges of the text are cut off, so Im not even sure what some of these boxes are asking for!!See [[Toolbars and page content appear too large after upgrading to Firefox 3]]
*Try to adjust the DPI setting, see http://kb.mozillazine.org/layout.css.dpi
*Try to set the pref layout.css.devPixelsPerPx to 2 on the about:config page.
To open the ''about:config'' page, type '''about:config''' in the location (address) bar and press the Enter key, just like you type the url of a website to open a website.
If you see a warning then you can confirm that you want to access that page.
If you need to increase (or decrease) the font size on websites then look at:
Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
NoSquint - https://addons.mozilla.org/firefox/addon/2592 -
Maximum text size for textFormat
Afternoon everyone,
I am working on an application in which text is created
dynamically. I seem to be experiencing a maximum size of 130 when
using textFormat. I cannot seem to find any references to this
limit. Is there a way to get around it?
So far my only resolution is to create a smaller text field
within a movieClip and then scale the movieClip. This moves the
text of the pixel location that I need it however.
Any help with this would be very much appreciated.
Cheers,
Michaelyou can making the text html and setting the text like this:
<font size="X">text</font>
Otherwise, if you can't set a font bigger tahn 130, you'll
have to resize movieclips.
You can create a custom class that embeds aTextField within a
movieclip so that you get transparent coding, just replace
TextField with CustomTextField. -
To increase font size in List Output in Report
Hi, I have to increase the font size of my report's list output. I dont have to print it. So, please dont suggest print control. Only it needs to be displayed as an output.....
Thanks.Sagar,
If you want the font size to be more you can do that using the SAP GUI settings .The output will then appear in the increased format as it is only a list output that you are trying to see.press ALT+F12.Choose New Visual Design and then increase font size to maximum.
Hope this helps.
Cheers
Nishanth -
Hello folks:
This is my first post. I'm working on just my second project in iMovie, so I hope I'm not asking something obvious, but I didn't see it in the documentation or in several pages of posts here.
This is the first time I've experimented with written narration on a series of black screens. I'm trying to create a somber effect with the narrative transitions, but I notice that the fonts seem to be scaled automatically smaller when I write a longer sentence. This makes the text look very inconsistent as it passes.
Another thing I'm noticing is that in the Centered Title feature where you can stack several lines of text that fade in and out, the first line is always a larger size font than succeeding lines, even though I haven't adjusted font size for succeeding lines.
If I want to write just one sentence per clip, is there a rule of thumb that I can observe for maximum sentence length that will help ensure consistent font size from one clip to the next? And is there a way to stack sentences in a multi-line Centered Title so that the first line is the same size as the rest of the lines? Anyone else experiencing this problem?
The font I'm using now is Futura medium. I've tried selecting succeeding lines and moving the font size slider and it doesn't work.
Thanks for any help provided.
Rod
G4 Mac OS X (10.4.4) 800 mhz/1.25 ghz RAMI'm not sure what "plist " is, but that seemed to do the trick. I can't thank you enough!!!
-
How can I change the font size and placement of photo descriptions in an iPhoto slide show?
With an iPhoto slide show, how do I change the font size for titles and descriptions and position the text when preparing a slide show?
to change the pixels crop to 100x100 and export with maximum dimension of 100 - see the user tip on exporting foo details on Export options - Exporting From iPhoto
As to DPI - digital photos have no DPI since DPI is Dots Per Inch and digital photos have no inches hence no DPI - when you print a photo then DPI is a mathematical calculation - dots divided by inches - it is not a setting
Print a 480 pixel photos as a 1" square and the print it 480 DPI (480 / 1 = 480) and print the 100 pixel image as a 1" square it will be 100 DPI (100 / 1 = 100) - print a 480 pixel photo as a 4.8 inch square and it is 100 dpi (480 / 4.8 = 100) - just a calculation - not a setting
LN -
Slider not rendering font size of text on another page
I am using a slider to control the font size of the text. On one page, I have the slider setup as follows:
<Grid Grid.Row="3" Margin="10,4.5,0.667,0"> <Slider x:Uid="FontSlider" x:Name="FontSlider" Header="Select font size" HorizontalAlignment="Left" VerticalAlignment="Top" Width="165" Margin="10,40,0,0" Height="65" Minimum="16" Maximum="32" ValueChanged="FontSizeChanged" LargeChange="8" SmallChange="8" TickFrequency="4" /> <TextBlock x:Uid="SampleText" Margin="207,63,11,169" Height="45" Text="Sample text" FontSize="{Binding ElementName=FontSlider, Mode=OneWay, Path=Value}" VerticalAlignment="Center" HorizontalAlignment="Center" Width="171" Style="{ThemeResource ListViewItemSubheaderTextBlockStyle}" TextWrapping="Wrap"/> </Grid>
The slider is behaving as expected and the content binded to it in the above textblock is also rendering properly.
However, when I try to bind the slider value to similar textblock on another page as below, the font size of the text does not change.
<TextBlock FontSize="{Binding ElementName=FontSlider, Mode=OneWay, Path=Value}" DataContext="{Binding}" Style="{ThemeResource ListViewItemSubheaderTextBlockStyle}" TextWrapping="WrapWholeWords"/>
I tried this with/without Style binding, but that does not helped either. How can I fix this?Elements on a page cannot access elements on another page. You can do the binding through a view model. The Slider value will have a two-way binding to a property in the view model. The TextBlock in the other page will bind its FontSize to that view model
property.
It might be easier if you don't use binding on the other page. When the slider value changes (ValueChanged event), save the value to a global variable. In the other page OnNavigatedTo, set the TextBlock FontSize using the global variable.
Maybe you are looking for
-
Can I stream my Macbook air to AppleTV?
I know that I can stream from iPhone and iPad, but I like to know if I stream my Macbook Air's screen to the Apple TV. I want to use my HDTV as a monitor for the Macbook Air wirelessly. Any help is much appreciated.
-
How to know if the path given exists or not???
i have a string containing a path (of a directory or a file(.pdf) i want to test if the path given exist in the hard disc or not i have tested with file.canRead but there is no results please help???
-
Saving file object to current Directory.
Ok I did a file transfer thing, after I receive the file object, how do I save it to the current directory? Thanks.
-
Any apps for iphone/itouch that help u make apps, something like scratch?
anyone know?
-
My iphone has been scratch and i didnt notice that when i unbox it... Can you help me how can i fix this?