Maximum number of interfaces to implement

I was searching for the maximum number of interfaces a class can implement.
The only references I found, was "more than one", "a two-byte count of the number of interfaces implemented by the class (or interface) defined" and the maximum number for the Java Card VM (15).
Does this mean that I can implement as much interfaces as I want (as long as the count of the total fits in a two-byte field - whatever that field is)?
Can anyone tell me how much exactly?
TIA,
Mylene

This compiles fine:
interface I0 { void doit(); }
interface I1 { void doit(); }
interface I2 { void doit(); }
interface I3 { void doit(); }
interface I4 { void doit(); }
interface I5 { void doit(); }
interface I6 { void doit(); }
interface I7 { void doit(); }
interface I8 { void doit(); }
interface I9 { void doit(); }
interface I10 { void doit(); }
interface I11 { void doit(); }
interface I12 { void doit(); }
interface I13 { void doit(); }
interface I14 { void doit(); }
interface I15 { void doit(); }
interface I16 { void doit(); }
interface I17 { void doit(); }
interface I18 { void doit(); }
interface I19 { void doit(); }
interface I20 { void doit(); }
interface I21 { void doit(); }
interface I22 { void doit(); }
interface I23 { void doit(); }
interface I24 { void doit(); }
interface I25 { void doit(); }
interface I26 { void doit(); }
interface I27 { void doit(); }
interface I28 { void doit(); }
interface I29 { void doit(); }
interface I30 { void doit(); }
interface I31 { void doit(); }
interface I32 { void doit(); }
interface I33 { void doit(); }
interface I34 { void doit(); }
interface I35 { void doit(); }
interface I36 { void doit(); }
interface I37 { void doit(); }
interface I38 { void doit(); }
interface I39 { void doit(); }
interface I40 { void doit(); }
interface I41 { void doit(); }
interface I42 { void doit(); }
interface I43 { void doit(); }
interface I44 { void doit(); }
interface I45 { void doit(); }
interface I46 { void doit(); }
interface I47 { void doit(); }
interface I48 { void doit(); }
interface I49 { void doit(); }
interface I50 { void doit(); }
interface I51 { void doit(); }
interface I52 { void doit(); }
interface I53 { void doit(); }
interface I54 { void doit(); }
interface I55 { void doit(); }
interface I56 { void doit(); }
interface I57 { void doit(); }
interface I58 { void doit(); }
interface I59 { void doit(); }
interface I60 { void doit(); }
interface I61 { void doit(); }
interface I62 { void doit(); }
interface I63 { void doit(); }
interface I64 { void doit(); }
interface I65 { void doit(); }
interface I66 { void doit(); }
interface I67 { void doit(); }
interface I68 { void doit(); }
interface I69 { void doit(); }
interface I70 { void doit(); }
interface I71 { void doit(); }
interface I72 { void doit(); }
interface I73 { void doit(); }
interface I74 { void doit(); }
interface I75 { void doit(); }
interface I76 { void doit(); }
interface I77 { void doit(); }
interface I78 { void doit(); }
interface I79 { void doit(); }
interface I80 { void doit(); }
interface I81 { void doit(); }
interface I82 { void doit(); }
interface I83 { void doit(); }
interface I84 { void doit(); }
interface I85 { void doit(); }
interface I86 { void doit(); }
interface I87 { void doit(); }
interface I88 { void doit(); }
interface I89 { void doit(); }
interface I90 { void doit(); }
interface I91 { void doit(); }
interface I92 { void doit(); }
interface I93 { void doit(); }
interface I94 { void doit(); }
interface I95 { void doit(); }
interface I96 { void doit(); }
interface I97 { void doit(); }
interface I98 { void doit(); }
interface I99 { void doit(); }
interface I100 { void doit(); }
interface I101 { void doit(); }
interface I102 { void doit(); }
interface I103 { void doit(); }
interface I104 { void doit(); }
interface I105 { void doit(); }
interface I106 { void doit(); }
interface I107 { void doit(); }
interface I108 { void doit(); }
interface I109 { void doit(); }
interface I110 { void doit(); }
interface I111 { void doit(); }
interface I112 { void doit(); }
interface I113 { void doit(); }
interface I114 { void doit(); }
interface I115 { void doit(); }
interface I116 { void doit(); }
interface I117 { void doit(); }
interface I118 { void doit(); }
interface I119 { void doit(); }
interface I120 { void doit(); }
interface I121 { void doit(); }
interface I122 { void doit(); }
interface I123 { void doit(); }
interface I124 { void doit(); }
interface I125 { void doit(); }
interface I126 { void doit(); }
interface I127 { void doit(); }
public class uu implements I0
,I1
,I2
,I3
,I4
,I5
,I6
,I7
,I8
,I9
,I10
,I11
,I12
,I13
,I14
,I15
,I16
,I17
,I18
,I19
,I20
,I21
,I22
,I23
,I24
,I25
,I26
,I27
,I28
,I29
,I30
,I31
,I32
,I33
,I34
,I35
,I36
,I37
,I38
,I39
,I40
,I41
,I42
,I43
,I44
,I45
,I46
,I47
,I48
,I49
,I50
,I51
,I52
,I53
,I54
,I55
,I56
,I57
,I58
,I59
,I60
,I61
,I62
,I63
,I64
,I65
,I66
,I67
,I68
,I69
,I70
,I71
,I72
,I73
,I74
,I75
,I76
,I77
,I78
,I79
,I80
,I81
,I82
,I83
,I84
,I85
,I86
,I87
,I88
,I89
,I90
,I91
,I92
,I93
,I94
,I95
,I96
,I97
,I98
,I99
,I100
,I101
,I102
,I103
,I104
,I105
,I106
,I107
,I108
,I109
,I110
,I111
,I112
,I113
,I114
,I115
,I116
,I117
,I118
,I119
,I120
,I121
,I122
,I123
,I124
,I125
,I126
,I127
public void doit(){}
}

Similar Messages

Maximum number of interfaces in Port Channel on Nexus 5596

Let me preface this by saying I am not a network expert....
I noticed that our customer had configured a port channel on their Nexus 5596 comprised of 16 interfaces. I thought the maximum number of interfaces in a port channel was 8 interfaces? I see in the Nexus 7000 documentation that if you configure 16 interfaces, the remaining 8 will be in "hot standby." Is this the same behavior on the Nexus 5000 series?
Thank you.

Same behavior on the 5500 series and other Cisco switches like 3750, 3850 , etc..
HTH

Maximum number of interfaces per vrf

hi, is there a limit or maximum number of interface / sub-interface which I could associate to a single vrf? The box is Cisco 10000..thanks..

Hi,
The limit is the max number of (sub)interfaces or idb the box can handle.
HTH
Laurent.

SG300 Cannot enable IPv6 on the interface - the maximum number of interfaces 3 has already been used.

The Sg300 is currently in L3 mode
Why is it that only 3 IPv6 interfaces are being allowed?
No where in the device specifications or in the documentation did I ever see this limitation when I purchased the switch!

That message it means that you will not be able to create another iCloud account on your device as the maximum number have already been created. Your only options are to either re-use one of the accounts previously created, or create your new account using on a different iOS device or Mac, if you have one.

SG300 Cannot add IPv6 address on the interface- the maximum number of addresses 3 has already been used.

First I ran into this brick wall on the number of IPv6 interfaces
SG300 Cannot enable IPv6 on the interface - the maximum number of interfaces 3 has already been used.
Also, it appears that there is no IPV6 routing in Layer 3 mode
SG300 L3 IPv6 routing does NOT work
And now this, I cant use more than 3 IPv6 addresses

Good Article
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph

APEX 4.0.1: restriction on maximum number of dynamic actions on a page?

Hello,
I would like to know if there is a restriction on the number of dynamic actions on a page.
I have a page with 29 dynamic actions. All works fine on the page.
If I create another dynamic action that only display an alert or does anything else, I have the error message HTTP 404 when I try do display the page.
If I delete an old dynamic action and create a new one then the page works fine.
So after several tests, it seems that there is a maximum number of DA on a page but can someone confirm that?
Environment:
APEX 4.0.1
Embedded PL/SQL Gateway
Regards,
Sddc

I stand corrected in that some limits are acknowledged:
http://download.oracle.com/docs/cd/E17556_01/doc/user.40/e15517/limits.htm
Where are people getting these ideas that normal form or "Codd" said that there was a
limit on columns and if you had more columns than a database product found convenient to implement that it was a 'design defect'? I took database management as an undergrad and in grad school and there was NO rule about number of columns. Anyone who says there is is shoveling pure bs. Even if there were such a rule, and there isn't, it is very inadvisable for a vendor who allows 1000 columns in a table in their database product to impose a limit that is 1/10 of that in an interface to their database. (And btw you can create a table (A 'wide' table, in sqlserver with 30,000 columns according to this:
http://msdn.microsoft.com/en-us/library/ms143432.aspx )
Artificially dividing up data instruments that were administered/collected at one time into pieces in separate tables, just to make a vendor's developers' life easier and more convenient, or just to keep the product from competing with the extremely extremely expensive "enterprise" products the vendor sells, is not acceptable.
Splitting highly related data into separate tables for no reason other than the
interface is not capable of handling it, creates a load of problems that would not otherwise
exist. What if the user enters less than all the parts? Then someone has to figure out if the parts not entered had no data recorded in the source or if they were simply accidentally skipped. Basically someone or a program would have to enter those pages and denote they had no content if that were the case. Much more logic, much more opportunity for error vs keeping data that was highly associated together.
A software vendor can apply whatever limits they want and no one can stop them, that's for sure. But what would be better here is making these more clear up front. This is a "rad" development tool for very small and not hugely complex forms and reports. Be clear and there will not be people royally steamed over spending their time and money evaluating a product that is not designed to do much of what people need it to do. This stuff should be in an FAQ and the top of the forum.

How to set up the maximum number of messages on a queue programmatically

Hi,
I am using IMQ 3.5 to implement a message layer for one of my projects. I created a "Job Status Queue", which receives job status report from a java application every minute. But I just want to keep the most current status report instead of all the job running history. How can I restrict the maximum number of messages to 1 programmatically?
Any suggestion or help will be appreciated.
Xiaoyun Tang

You can't limit the destination size programmatically, but you can do it administratively and associate a behavior to occur when the limit is reached. In your case it sounds like you want a queue, 1 message deep, and to discard the oldest message when the queue is full. When you create the physical queue on the broker you can specify these attributes (you can also update them on an existing queue). For example:
imqcmd create dst -t q -n StatusQ -o maxNumMsgs=1 -o limitBehavior=REMOVE_OLDESTFor more information see Chapter 6 of the Message Queue Administration Guide. In particular the "Managing Destinations" section:
http://docs.sun.com/app/docs/coll/MessageQueue_35_SP1
Joe

ORA-22290: operation would exceed the maximum number of opened files or LOB

i am getting this error in a procedure.
ORA-22290: operation would exceed the maximum number of opened files or LOBs
22290, 00000, "operation would exceed the maximum number of opened files or LOBs"
// *Cause: The number of open files or LOBs has reached the maximum limit.
// *Action: Close some of the opened files or LOBs and retry the operation.
NAME TYPE VALUE
session_max_open_files integer 10
Procuedure:
CREATE OR REPLACE PROCEDURE WMSOWN."PROC_WMS_XML_READ"
P_EVENT_KEY IN VARCHAR2,
X_STATUS_MSG OUT VARCHAR2,
X_STATUS OUT NUMBER
)AS
l_parser dbms_xmlparser.Parser;
domdoc xmldom.DOMDocument;
nodelist XMLDOM.DOMNODELIST;
node XMLDOM.DOMNODE;
n_child XMLDOM.DOMNODE;
elements XMLDOM.DOMELEMENT;
name_node_map XMLDOM.DOMNAMEDNODEMAP;
parent_seg varchar2(4000);
tag_name_bkp varchar2(4000); -- LOOK OUT BRAD IS CODING AGAIN
chile_seg VARCHAR2(4000);
p_seg VARCHAR2(4000);
p_seg1 VARCHAR2(4000);
p_seg2 VARCHAR2(30);
p_int_name VARCHAR2(50);
col_value VARCHAR2(100):=NULL;
len1 NUMBER;
cnt NUMBER;
seg_id_bkp NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
sequence_bkp NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
prev_sequence NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
prev_seq_set VARCHAR2(3); --brad coding
parent_id number; ---brad coding
valid_seg NUMBER; -- LOOK OUT BRAD IS CODING AGAIN
data_status VARCHAR2(10);
v_main_seg VARCHAR2(50);
v_seq_no NUMBER;
V_CLOBLOCATOR CLOB;
V_FILELOCATOR BFILE;
v_amount_to_load NUMBER;
dest_offset NUMBER := 1;
src_offset NUMBER := 1;
lang_context NUMBER := DBMS_LOB.DEFAULT_LANG_CTX;
warning NUMBER;
v_event_name USR_OUB_FILE_PROCESS_DETAILS.EVENT_NAME%TYPE;
v_file_name USR_OUB_FILE_PROCESS_DETAILS.FILE_NAME%TYPE;
DIRECTORY_PATH_INVALID EXCEPTION;
PRAGMA EXCEPTION_INIT(DIRECTORY_PATH_INVALID,-22285);
NO_PRIVILEGES EXCEPTION;
PRAGMA EXCEPTION_INIT(NO_PRIVILEGES,-22286);
INVALID_DIRECTORY EXCEPTION;
PRAGMA EXCEPTION_INIT(INVALID_DIRECTORY,-22287);
FILE_NOT_FOUND EXCEPTION;
PRAGMA EXCEPTION_INIT(FILE_NOT_FOUND,-22289);
P_DIRECTORY VARCHAR2(50) :='WMS_XML_DIR_OUB';
v_whid poldat_view.wh_id%type;
BEGIN
--NAME : PROC_WMS_XML_READ.PLS
--DESCRIPTION :
-- Procedure PROC_WMS_XML_READ search XML files from remote location.
-- Open,Parse and Read XML files. Store all XML values into tables.
-- Developed by Dharmesh Patidar(jw782)
-- History: New condition is added i.e. p_seg:=parent_seg to maintain PARENT and CHILD relationship
-- by Vishwanath Dubey(jl246) on 17-June-2011
-- BRAD_XML_DEBUG table removed for CLEANING Activity by DHARMESH PATIDAR(JW782) ON 29-JUNE-2011.
/*BLOCK FOR CAPTURING EVENT NAME BASED ON EVENT ID START*/
BEGIN
SELECT event_name,file_name,WAREHOUSE_ID
INTO v_event_name, v_file_name,v_whid
FROM usr_oub_file_process_details
WHERE event_id=p_event_key
AND process_flag='U';
EXCEPTION
WHEN NO_DATA_FOUND THEN
x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : Record is not available in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN TOO_MANY_ROWS THEN
x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : More than one Records found in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN VALUE_ERROR THEN
x_status_msg:=SQLCODE||':'||' Error while selecting event name and event id in Procedure PROC_WMS_XML_READ : Varibale length is small or data type mismatch while selecting event id and event name in USR_OUB_FILE_PROCESS_DETAILS table for event id '|| P_EVENT_KEY;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN OTHERS THEN
x_status_msg:=SQLCODE||':'||'Error in Procedure PROC_WMS_XML_READ while selecting event name and event id ';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END;
/*BLOCK FOR CAPTURING EVENT NAME BASED ON EVENT ID END*/
/*LOGIC TO READ XML FROM REMOTE LOCATION START*/
DBMS_LOB.CREATETEMPORARY(V_CLOBLOCATOR, TRUE);
V_FILELOCATOR := BFILENAME(P_DIRECTORY,V_FILE_NAME);
DBMS_LOB.OPEN(V_FILELOCATOR,DBMS_LOB.FILE_READONLY);
V_AMOUNT_TO_LOAD := DBMS_LOB.GETLENGTH(V_FILELOCATOR);
DBMS_LOB.LOADCLOBFROMFILE(V_CLOBLOCATOR,
V_FILELOCATOR ,
V_AMOUNT_TO_LOAD,
DEST_OFFSET,
SRC_OFFSET,
0,
LANG_CONTEXT,
WARNING);
dbms_lob.close(V_FILELOCATOR);
/*LOGIC TO READ XML FROM REMOTE LOCATION END*/
/*Temporary Code to help with debug Clear the table before populating it with new data*/
--delete table BRAD_XML_DEBUG;
cnt:=1;
seg_id_bkp:=0;
data_status:='N';
v_seq_no:=0;
prev_seq_set:='NO';
/*create new parser.*/
l_parser := dbms_xmlparser.newParser;
dbms_xmlparser.parseClob(l_parser, replace(V_CLOBLOCATOR,'&','1x2x3x4x5'));
/*Parse the document and create a new DOM document.*/
domdoc :=dbms_xmlparser.getDocument(l_parser);
/* get all elements in the DOM*/
nodelist := XMLDOM.getElementsByTagName(DOMDoc, '*');
len1 := XMLDOM.getLength(nodelist);
/* loop through elements of the DOM */
FOR j in 1..len1-1 LOOP --MAIN LOOP START
BEGIN
/*below sql will fetch Node from table to travel xml data*/
BEGIN
SELECT int_name,tag_name
INTO p_int_name, p_seg1
FROM usr_wms_tag_det
WHERE int_name=v_event_name
AND seq_no =cnt;
EXCEPTION
--PLEASE DO NOT HANDLE ANY EXCEPTION APART MENTIONED BELOW
WHEN OTHERS THEN
NULL;
END;
IF cnt=1 THEN
v_main_seg:=p_seg1;
END IF;
EXCEPTION
--PLEASE DO NOT HANDLE ANY EXCEPTION APART MENTIONED BELOW
WHEN no_data_found THEN
null;
WHEN OTHERS THEN
x_status_msg:=SQLCODE||':'||'Error in Procedure PROC_WMS_XML_READ while selecting interface name and tag name'||sqlerrm;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END;
/*LOGICS TO READ XML START*/
node:=XMLDOM.item(nodelist, j);
elements:=XMLDOM.makeElement(node);
parent_seg:=(xmldom.getTagName(elements));
tag_name_bkp:=(xmldom.getTagName(elements));
name_node_map:=xmldom.getAttributes(node);
n_child:=xmldom.getFirstChild(node);
col_value:=xmldom.getNodeValue(n_child);
/*get the sequence number from the interface hierarchy table */
SELECT count(1)
INTO valid_seg
FROM usr_wms_tag_det
WHERE int_name=v_event_name
AND tag_name = tag_name_bkp;
if valid_seg>0 then
begin
SELECT seq_no
INTO sequence_bkp
FROM usr_wms_tag_det
WHERE int_name=v_event_name
AND tag_name = tag_name_bkp;
seg_id_bkp:=seg_id_bkp+1;
p_seg:=parent_seg;--Modified by Vishwanath Dubey dated 16-jun-2011
end;
end if;
if prev_seq_set = 'NO' then
begin
prev_sequence := sequence_bkp;
prev_seq_set := 'YES';
end;
end if;
if sequence_bkp < prev_sequence then --you just moved up level(s) in the message structure
begin
select max(seg_id)
into parent_id
from usr_wms_global_xml_det
where seg_sequence = sequence_bkp-1;
prev_sequence := sequence_bkp;
end;
end if;
if sequence_bkp > prev_sequence then --you just moved down a level in the message structure
parent_id := seg_id_bkp-1;
prev_sequence := sequence_bkp;
end if;
/*end getting the hierarchy table sequence */
/*LOGICS TO READ XML END */
IF (parent_seg =p_seg1) or (parent_seg=p_seg2) THEN
if parent_seg=v_main_seg then
v_seq_no:=v_seq_no+1;
end if;
BEGIN
/* INSERTING DATA LOGICS TO READ XML END */
INSERT INTO usr_wms_global_xml_det values(p_int_name,tag_name_bkp,parent_seg,seg_id_bkp,sequence_bkp,parent_id,'','','',J,v_seq_no,data_status,cnt);
EXCEPTION
WHEN OTHERS THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ while inserting records in USR_WMS_GLOBAL_XML_DET table for interface name and parent segment '||P_INT_NAME||','||PARENT_SEG;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END ;
p_seg:=parent_seg;
p_seg2:=P_SEG1;
cnt:=cnt+1;
ELSE
chile_seg:=parent_seg;
BEGIN
/* INSERTING DATA LOGICS TO READ XML END */
INSERT INTO usr_wms_global_xml_det values(p_int_name,tag_name_bkp,p_seg,seg_id_bkp,sequence_bkp,parent_id,'',chile_seg,replace(TRIM(Col_Value),'1x2x3x4x5','&'),J,v_seq_no,data_status,cnt);
EXCEPTION
WHEN OTHERS THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ while inserting records in USR_WMS_GLOBAL_XML_DET table for interface name and parent segment '||P_INT_NAME||','||PARENT_SEG;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
END;
END IF;
END LOOP; --MAIN LOOP END
dbms_xmldom.freeDocument(DOMDoc);
x_status:=0;
EXCEPTION
WHEN DIRECTORY_PATH_INVALID THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ DIRECTORY PATH IS INVALID';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN FILE_NOT_FOUND THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ INVALID XML FILE NAME OR FILE DOES NOT EXISTS';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN NO_PRIVILEGES THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ Insufficient privileges on file or directory NAME- '||p_directory||' to perform FILEOPEN operation.';
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
RETURN;
WHEN OTHERS THEN
x_status_msg:=SQLCODE||' : Error in Procedure PROC_WMS_XML_READ '|| SQLERRM;
x_status:=SQLCODE;
proc_wms_error_trace(v_whid, --warehouse id
null , --event id
v_event_name , --event name
x_status, --error code
x_status_msg ); --error message
dbms_xmlparser.freeParser(l_parser);
dbms_xmldom.freeDocument(DOMDoc);
RETURN;
END PROC_WMS_XML_READ;
Edited by: user13427480 on Feb 8, 2013 7:08 PM

when you post sql statement use also similar threads :
ORA-22290: operation would exceed the maximum number of opened files or LOB
https://kr.forums.oracle.com/forums/thread.jspa?messageID=10842417

Maximum number of files in a folder ?

Hello, what is the maximum number of files in a folder OS X can handle ?
I used a file recovery software called FileSalvage to save some files of an external 300GB with a corrupted disk directory (unable to repair with the usual repair/recovery programs).
FileSalvage recovered about 435,000 files and sorted them by extension in individual folders, unfortunately it does not recognize the file names and just sequentially names the files per extension.
The .jpeg, .gif and .html folders had up to 75,000 files. After recovery the external FW drives started to behave very strange, unresponsive, just hanging, time-out. I tried on a Mac Mini, iMac G5, an iBook and PowerBook, OS X 10.3.9 and 10.4.3, FW400/800 and USB 2.0 interface, they all had pretty much the same failure mode after a while.
Running Disk Utility on the drives with the recovered FileSalvage folders showed a corrupted directory (invalid file count) and unable to repair, although I could copy most of the folders of the disk (deleted the folders with more than 10,000 files per folder).
I suspect that File Salvage copies more files in a folder than OS X allows, causing unpredicable problems.
Any ideas ?

From "Mac OS X: Mac OS Extended Format volume and file limits"
"Maximum number of files (or files and folders) in a folder … up to 2.1 billion"
According to a note in the document, the above is subject to the drive's size (maximum 16 terabytes in "Tiger") and block size, ie. the number of available blocks.
So it would appear that the number of files you mentioned would be well within theoretical limits, although I suppose there could be a bug in some other part of OS X. Otherwise, maybe there is a problem with the drive...

Maximum number of line items in PO/SA....

Hi,
1.
What is the limitation on maximum number of line items in a PO/schedulling agreement/Contract.
2.
Also what is the maximum permissible number of lines in a single accounting document possible.As far as I know there is a limitation of counter 999 meaning if an aaccounting document is generated after GR then it will only allow max 999 lines.
Is there any other way to avoid this.Because in my case I have for several line items in PO and several pricing conditions with separate GL account.Now when I do GR and if a PO has many line items with about 4 to 5 conditions then for each line item there would be minimum 6-7 entries.
How can this best be handled in SAP.
I was being adviced to split the GR but is there any better way or is there any option like summerised acounting document ?
Please suggest as this is most critical for me.
Thanks in advance
Regards,
manOO

Hi,
There is no limitation in PO. But if you want, you can use following user exit;
<b>EXIT_SAPMM06E_012</b>
With regard to Maximum Number of items: There is a limit of (999) line items which can be posted per FI document. This is because the line item number (BSEG-BUZEI) field length is defined as (3) numeric positions, i.e., (999) line items.
The most commonly used workarounds are as follows:
(1) Implement FI summarization (per note 36353).
(2) Cancel the original billing document and split it into smaller documents using different payment terms but actually with the same terms, in case of invoice verification.
This will avoid the (999) line item limit for FI postings. Please also have a look at the note 117708 and 77161.
Bye,
Muralidhara

Maximum number of "Single values" accepted in "Multiple Selection"

Hello gurus. I wonder if you could help me with this.
You know how in transactions like the Data Browser (SE16), you want to look up records in a table, for example MARA.
If you want to list only individual values, then you can press the yellow arrow to the right of the fields, and this opens the "Multiple Selection" window. In it you can add single values, ranges, etc.
My question is, what is the maximum number of single values that you can put in here?
For example, sometimes if I put like 5000 lines, instead of getting a result I get an ABAP runtime error that reads:
Runtime errors DBIF_RSQL_INVALID_RSQL
Exception CX_SY_OPEN_SQL_DB
"Error in the module RSQL accesing the database interface".
But if I put around 1500 or less, then I don't have that problem. It lists the results just fine.
How do I know what the maximum number of lines these functions allow?

Hi
Yes even I had the same experience and based on my several tests I dont put more than 2000 valeues.
Please advice if you have any question.
Thanks

VL09 hit error 'F5 727 ("Maximum number of items in FI reached")'

Hi,
I have one user who is trying to cancel GI for DO using transaction VL09 and hit the error 'F5 727 ("Maximum number of items in FI reached")'. I know it is caused by FI document maximum item no is hit. Is there a solution to cancel this GI document? I have checked on SAP note: 0001353827 AC interface: Document split in FI for goods movements, but it does not solve my issue since the system release version is not compatible.
Please help.
Thanks in advance.
Regards,
Ling Ling

I need to use VL09 to cancel the document, because I need to change the currency on the preceding document (PO).
The case is a user created a Supply Chain PO, a DO created by reference to PO, then post good issue and post good receipt. Then user found out the currency in PO was wrong, so did cancellation on good receipt and good issue. Good receipt is cancelled successfully, but cancel good issue via VL09 hit error.
Instead of applying summarisation in FI, any suggestion for this issue?
Thanks.

Error "Maximum number of items in FI reached"

Hi All,
We are getting error "Maximum number of items in FI reached", if there are more than 999 items. We have found an SAP note "Note 36353 - AC interface: Summarizing FI documents".
This note seems to do more with customizing & doesnt need any code changes.
Our system is of release 4.6C, My concern is that, in the note it has been mentioned in the correction instruction 1258 that for release 4.6C the Valid Support Package is 46C-ALL SUPP. PACKAGES.
If this support package is not available in the system does this SAP note work. I mean is this the prerequisite.
Kindly suggest if this is the correct note as well.
Thanks & Regards
Abhii

Hi Abhii,
Please see following threads..
Re: Maximum number of items in FI reached
http://www.sapfans.com/forums/viewtopic.php?f=6&t=301319
Hope this helps...
Best Regards,
Archana

Message no. F5727:maximum number of items reached in FI sereen MI07

hi sap techies
Message no. F5727:maximum number of items reached in FI in screen MI07
when i try to post inventory difference in MI07(Physical difference posting) i give the difference amount and reason for movement and i try to save it.it gives me the error maximum number of items in FI reached please help
kind regards
sap fico
arman
Edited by: akausar on Oct 10, 2011 3:23 PM

Dear Akausar,
The error F5 727 is an error from the FI component side. This is
because FI cannot accept a posting document with more than 999 line
items.
There is a limit of (999) line items which can be posted per FI
document. This is because the line item number (BSEG-BUZEI) field
length is defined as (3) numeric positions, i.e., (999) line items.
The fact that an MM document contains X positions, doesn't
mean that the FI document will contain the same number. This is the
reason why in some occasions the error message is triggered when posting
an invoice in MM.
Please bear in mind the 'rule of the thumb' for this kind of scenarios
in which you have a large MM-Document: consider an average of 4 line
items created for each line: this is due to discounts, tax postings,etc.
Unfortunately, there are no immediate plans to expand the number of
line items beyond the current limit of (999) lines per document.
SAP's Development group is aware of this functionality change request;
however, the change is massive because BSEG is a cluster table which
is used in numerous R/3 programs. The most commonly used workarounds
are as follows:
1) Implement FI summarization (per note 36353).
2) Cancel the original billing document and split it into smaller
documents using different payment terms but actually with the
same terms.
This will avoid the (999) line item limit for FI postings.
br, Guido

Finding maximum number using methods

Hello, I am trying to calculate the maximum number given by the user using methods. Basically, i am learning the implementation of the methods.
Unfortunately, this code got some errors. Could you please help me to identify this?
import java.awt.*;
import javax.swing.*;
public class MaxNumber extends JApplet{
     public static Double main (String args[]){
          JTextArea outPutArea = new JTextArea ();
          String num1 = JOptionPane.showInputDialog("Enter the first number");
          String num2 = JOptionPane.showIputDialog("Enter the second number");
          String num3 = JOptionPane.showInputDialog("Enter the second number");
          double number1 = Double.parseDouble (num1);
          double number2 = Double.parseDouble (num2);
          double number3 = Double.parseDouble (num3);
          //varianle storing maximum number.
          double maxResult = maximum(number1, number2, number3);
          //Displaying output
          outPutArea.setText("First number is: "+number1+"Second number is: "+number2
                    +"Third number is: "+ number3+ "/n Maximum number: "+ maxResult);
          // Get the components GUI display area
          Container c = getContentPane();
          // Attach outputArea to container c
          c.add (outPutArea);
          //maximum class definition
          Double maximum(double x,double y,double z)
          return Math.maxResult( x,Math.maxResult( y, z ) );
}Thank you,

Do you have compilation errors or are you getting the wrong output? I could guess, but you need to learn to describe your problem better than "It's getting errors. What do I do?"
Your maximum(...) method should return a primitive double, not a Double, but that's not your problem (autoboxing will occur, which you probably don't even realize).

Maximum number of interfaces to implement

Similar Messages

Maybe you are looking for