Maximum Number of Nodes 10000 reached

Hi Im using a loop condition for deadline rendering with system time then the worlkflow showing error with the message
"Maximum Number of Nodes 10000 reached" where im going wrong
im checking my dealine requirement for every 3 minutes by using loop condition original requirement is to check for every 3 days
im confused over here where im going wrong
Thanks

Hi Prasad,
As suggested by our friends, there is no termination condition in the loop , and it has become an infinite loop.
To elaborate this error description, find extarcts from help :
Maximum number of nodes that can be processed at runtime before the workflow runtime system assumes an endless loop and cancels the current workflow.
The presetting for this value is 10000.
Regards,
Akshay

Similar Messages

Maximum number of nodes reached

Hello all,
I am currently trying to explain a problem with one of our WF run and I just found out, under the "Step History" tab of a Work Item, the error message "Maximum number of nodes reached" was logged. That certainly explains the problem but I have some questions regarding such a message:
1) If WF-A calls a subworkflow WF-B, does this limit of 10,000 nodes apllies for the whole WF run (i.e. WF-A nodes + WF-B nodes) or is it 10,000 nodes for WF-A and 10,000 nodes for WF-B?
2) In our situation, the error was logged within the WF-B (subworkflow) work item which I beleive caused WF-A to fall into an error status. Some people have tried to re-execute the WF-B workitem without any success... Always the same error was reported. Is there anyway to re-start a WF that is in Error if it has reached this limit of nodes?
Thanks.
José

Hello Rick,
You are right, this worfwlow run was started back in May 2010 and yes, it is for the creation of a new point of sale. I understand when you say that obviously, the business managed to survive and we should cancel and restart and this is exactly what we are investigating at the moment but this customer wanted us to try to restart it considering, I suppose, the amount of work already completed in this workflow (which contains many subworkflows that are also in progress and stopped because of this problem).
To your question "How come this error didn't affect other wokflow instances?", I would say that the customer have been lucky so far because there was a design issue in this workflow definition but the "context" required to create this error happened only once since its implementation. However, they are still at risk and this WF definition requires a modification for sure to prevent this from happening again in the futur.
Concerning this 10,000 value, I've asked myself the same question since the change in the customizing made no differences, it has to be kept somewhere inside the workflow instance but where?. I have chekced all the elements of the WF container but, not there!
I will investigate with SWI2_DIAG, thanks for the hint and I will let you know through this thread.
Merci ! (Thanks)
José

Workflow erro: maximum number of nodes for a session reached

Hi
a number of workflows went into error with message maximum number of nodes for the session reached 11000 . what can be the reason . is there some settings thats need to be made in production . because it is working in dr3 and qr3

Hi,
Check the condition on the loop for you workflow. It seems its getting into infinite loop.
Also check for the possibility FM which might be triggering your workflow is getting executed in an infinite loop. So it might trigger multiple instances of the same workflow.
Regards,
Niraj

GUI connection error MAXIMUM NUMBER OF CONNECTION HANDLES REACHED

Dear Experts
while logging on to GUI7.10 I am getting following error
MAXIMUM NUMBER OF CONNECTION HANDLES REACHED'
'MAXIMUM NUMBER OF HANDLES REACHED'. 'NO MORE MEMORY IS AVAILABLE'.
'DO YOU WANT TO SEE DETAILED ERROR DESCRIPTION?'
When i click on yes to the question above, i get the following:
'COMPONENT = DPTM'
'RELEASE = 7.10'
'VERSION = 10'
'RETURN CODE= -16'
'Counter = 3
This error is not allowing me work.
Does anyone have a solution?

Hi,
I am having the same issue. Did you resolve the issue.
Please let me know
Regards

Maximum number of nodes in Multimaster Replication

Has anyone setup a multimaster replication environment on 8.1.7 with more than 11 nodes?
What could be the maximum number of nodes for reliable operation?

Hi,
With Oracle 8.1 you can have upto 9; but I think you can have under one of the replicated DB another replicated DB. tree like tructure.
Best,
EA

Error Message-"Maximum number of internal sessions reached"

Hi,
   In one of the User defined screen , we are getting error as
"Maximum number of internal sessions reached".
   This error is not coming each & every time.This screen is used to store the values in Z-table.
   This error is coming after entering 6-9 entries.
   What may be the problem.
   The code is as follows :
   when 'save'.
        INSERT zmmt001_grn_gate FROM wk_zmmt01.
        INSERT zmmt002_grn_item FROM TABLE it_zmmt02.
        IF sy-subrc EQ 0.
          COMMIT WORK.
          MESSAGE I002 WITH wk_sno.
          CLEAR wk_lifnr.
          CLEAR wk_ebeln.
          CLEAR wk_name.
          CLEAR wk_appval.
          CLEAR wk_chal.
          CLEAR wk_form38.
          REFRESH it_temp_tc1 .
          CALL TRANSACTION 'ZMMI001'.
        ELSE.
          ROLLBACK WORK.
          MESSAGE e000 WITH text-006.
        ENDIF.
Whether CALL TRANSACTION 'ZMMI001' statement having problem..
Pls give your suggestion on this.
Thanks in Advance,
Best Regards,
Pavan.

Hi
I agree on the reason of the problem, too. SAP limits the number of internal sessions. By calling the transaction with <b>"CALL TRANSACTION ..."</b> statement, you keep the current transaction's program data and open a new internal session. To handle things technically, SAP forces an internal session number limit.
The solution is to use <b>"LEAVE TO TRANSACTION ..."</b> which ends the current transaction session, rolls out the relevant program and then opens the new session.
*--Serdar
[email protected]

I can't enter a Site. Ihere is only a message: "Maximum number of open connections reached."

If i want to go to a Site, i recive this: "Maximum number of open connections reached.
" other Browser work. I have the Problem only with Firefox.

Check the connection settings.
*Firefox/Tools > Options > Advanced : Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then select "Use the system proxy settings" setting or select "No Proxy".
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

Maximum number of apple id reached how to solve it?

Hi,
When i tried to activate iphone it showing "Maximum number of apple id reached ! " How to solve this ? I dont have old id details.!
Thanks.

Have you recently purchased iPhone second hand ?

Maximum number of Sessions ever reached in the last two days

DB version:11gR1
We are studying the number of sessions created by one of our JAVA oltp application. We would like to know the maximum number of sessions reached in the last two days.
I can see max_utilization column from the query
select * from v$resource_limit where resource_name='processes'But i don't know the time interval (no of days) on which this value is based upon.

Hi,
One alternate option will be noting the value before you start the experiment using following statement.
select value from v$sysstat where name = 'user calls';
And running this SQL after you are done with making calls. Then you can subtract the two values to get the users calls made between the two times. Keep in mind that this will include all calls made to the database.
Regards

Maximum Number of line iten reached in FI

Hi All,
i ahve a question that wether the settings in OBYC is depends on sales organization / Plant? i mean, we have two sales orhganizations under one company code and orders in sales organization 1000 we are able to bill without any problem even for more number of materials. but for sales organization 7000 we are getting the subject error while doing PGI, i found that we should maintain / do the summerization of the documents in OBYC t-code. there i found for billing type VBRP and VBRK the settings sre maintained. what should i do? is there any other setting need to maintain?
Thanks & Regards
Ashwini

i have a question that wether the settings in OBYC is depends on sales organization / Plant?
To me, NO, it does not depend on sales organization. I assume your issue is based on the pricing procedure used by these sales organization. It looks you have two different pricing procedure for these two sales organizations. If pricing procedure are different, then check the number of pricing condition types and associated account keys. This will influence number of line items posted in the accounting. So you may need to summarize the line items. Take a look at OSS 1675235 - Error message F5727 "Maximum number of items in FI reached" when release SD billing document to accounting, Note 36353 - AC interface: Summarizing FI documents and/or 1483198 - Error F5 727 "Maximum number of items in FI reached" when releasing invoice to accounting
Regards,

Maximum number of nodes in a Weblogic cluster on RedHat Linux?

Is there a limitation of the number of nodes in a weblogic cluster
          running under RedHat Linux?
          Can I start with 5 nodes and in a year scale up to 500 or 5000 nodes?
          Thanks!
          Ralf.


Ralf,
          > Is there a limitation of the number of nodes in a weblogic cluster
          > running under RedHat Linux?
          A realistic limit, of course.
          > Can I start with 5 nodes and in a year scale up to 500 or 5000 nodes?
          If your app is completely stateless, then it can scale to 40 maybe 80
          servers.
          The problem is that stateless apps typically manage state that sits behind
          them, and there's basically no database in the world that can handle the
          load that 40 servers can put on it. Depending on the app, you can easily
          saturate 4 database CPUs per 1 app server CPU, but usually the factor is
          closer to 1:1, and with agressive caching in the app tier even less.
          Things like stateful session bean replication and HTTP session replication
          in a cluster ... well, YMMV ... but I would hypothesize that it won't scale
          up anywhere close to 40 servers under load.
          Peace,
          Cameron Purdy
          Tangosol, Inc.
          http://www.tangosol.com/coherence.jsp
          Tangosol Coherence: Clustered Replicated Cache for Weblogic
          "Ralf Reddin" <[email protected]> wrote in message
          news:[email protected]..
          >

Maximum number of lines 999 reached in FI - Post Goods Issue Vl02N

Hi
While doing PGI for more than 500 items, the FI line items have reached more than 999 and system issues the Msg " maximum no of items in FI reached."
As per Note 36353, we have maintained blank values for MKPF (reference transaction) in table TTYPV using transaction OBCY.
Now when we tried to post the PGI for more than 500 items, system has issued the foll. msg "Error in FI Data Compression".
Help us in solving this issue.
Thanks

Hi,
Were you able to solve this issue, we have around 708 lines in the Outbound Delivery, as it would create more than 999 FI lines it is failing.
Thanks.
regards,
Raj

Cost Component Structure (OKTZ) Issue - Max number of cost fields reached

Hello.
I'm having this issue in OKTZ when adding new cost component in an exisiting cost component structure. it says "maximum number of cost fields reached (40)".
not sure what to do with this.
please see screenshot
http://img39.imageshack.us/img39/1700/oktz.jpg

Hi Andrew,
When yo create the Cost Components in the Cost Component Structure, inside each Cost Component, there will be properties relating to whether the Cost in that Cost Component is Fixed / Variable, relevant to Inventory Valuation or not etc.
To view these options...Go to OKTZ, select the line of your Cost Component Structure, double click on "Cost Component with Attributes" in the left side navigation. Now, you will be able to see the list Cost Components on right hand side. If you double click on any Cost Component, you will see the properties of that Cost Component.
There, you can see ther radio buttons "Variable Costs" and "Fixed and Variable Costs".
Now, in Standard SAP, you will be able to create a maximum 40 Cost Components. The behaviour of the system goes like this.... If one Cost Component is only "Variable Cost", it will take the space of one Cost Component out of the maximum 40. If one Cost Component is of "Fixed and Variable Costs", then it will take the space of two Cost Components out of the maximum 40. That means, if all of your Cost Components are "Fixed and Variable", then you will be able to create only 20 Cost Components.
You can find the SAP explanation regarding this in the IMG Documentation...
SPROControllingProduct Cost ControllingProduct Cost PlanningBasic Settings for Material Costing--Define Cost Component Structure. Check the IMG Documentation there to find the following text...
Structure of the Cost Components in a Cost Component Split
The cost components are listed in a cost component structure that can contain up to 40 cost components (cost fields).
You can create up to 40 cost components that contain variable costs.
For cost components that contain full costs, the system creates a second cost field for the fixed costs. This means that you can create no more than 20 cost components that are full costs.
Revert back for further explanation...
Srikanth Munnaluri

Maximum Number of Items has been reached in FI

Hi All
We are working on MySAP ERP 2005.
We received the following error massage:
[Maximum number of items has been reached] we then updated table TTPYV using MATNR,MEINS,MENGE,PAOBJNR,POSN2,VBEL2,WERKS,ZEKKN
We had these same settings in R/3 4.7 and it worked very well.
1. What are MySAP ERP 2005 requirements in order to get SD billing items summarized in FI? our client wants one invoice with more than 10000 items
2. What are other IMG settings required in both FI/SD modules to get this working?
3. Are there any User Exits required?
4. Are there any CO settings required?
5. Are there any G/L account settings required?
Please assist
Regards,
Mutali

I don't think you can. We had the same problem and had a good look at sap notes and posts from SDN etc. and came to the conclusion that you can only invoice up to 9999 items. Not entirely sure about that number, might be 999 items. In any case we decided to break down the billing list by creating more than one billing documents.
You can do the same and then create an Invoice list, which is a document that will contain the values of all individual billing documents without posting any values to FI/CO

Maximum number of licenses reached error message on CCX agent's desktop

Intermittently CAD agents or supervisor are getting the error message "Maximum number of licenses reached". I have checked at the same time of error, still there are license available but users are getting this error message. Currently we have 50 seats licenses.I have noticed this problem reoccur when it's reaching the login agents between 40-50 agents. Is there any threshold value, we can modify to get rid of this error message.

We had a very similar issue last week. For us we had a couple of sessions that were stuck that didn't end properly even after a restart (probably because we have a HA cluster).
We have 35 seat licenses activated but only 33 agents could log in. Ended up raising a TAC case and doing the following -
1) From the command line run show uccx cad license usage to list the current license status - a list of IPs that are currently claiming a license.
2) Run the same command when the contact center is closed and see who is still claiming a license. Here I traced the computers down and made sure the Agent or Supervisor application was closed (forcibly if necessary).
3) Restart the Cisco Desktop License and Resource Manager Service on all nodes in the HA cluster to clear any stuck sessions.
Remember though that anyone logged into the Supervisor application also uses a seat license!

Maximum Number of Nodes 10000 reached

Similar Messages

Maybe you are looking for