Maximum number of songs to be stored in a reburnished Z-Xtra - New Hard disk of 100

My original hard disk of 60 Gb failed and I replaced it with a new one of 00 GbIs it possible to fill out completly the capacity of the new disk with songs . ( Nearly to 33.000 ) or is there a limitation for the firmware installed ?My actual firmaware is 2.0.03Thanks for your help

Well if you're going by Creative's?assumption that the adverage person?is still encoding there music at low bitrates of 28kbps (MP3) and 64kbps (WMA), then you might be able to get additional songs on there than? a normal person who uses encodes of 92-320kb
ps.
Having said that, I remember that the original?firmwares?(before PlayforSure), had a limit to the amount of tag information it could hold. So figurati'vely speaking you may be able?get 33,000 songs on there if you didn't tag your music, but less songs will fit if you fully tag your music. I have not heard if this limitation still exist with the PlayforSure firmware though.Message Edited by TimT on 03-06-200707:02 PM

Similar Messages

Is there a Maximum number of songs you can have in iTunes library?

I have reached what I believe to be the Maximum number of songs that iTunes will allow. That number is 37,562 songs. Since reaching this plateau I have since split my iTunes library into two seperate libraries using the program Libra but am wondering what happened to all the songs I either downloaded off my own CDs or purchased from the iTunes store after I reached that maximum number. It's not a matter of hard drive space as I was originally told by several Apple Employees...I have a Terabyte drive that I have my libraries going to that has over 700GB still free. I'm concerned that songs may have been deleted and wonder how I found out which ones were deleted or what happened to songs as I reached the 37,562 level and continued to add songs until I finally realized that the song count wasn't going any higher. I am on a Mac, using a G4 desktop under MacOSX 10.4.8. Any help would be appreciated...Tks

popeyetsm
If there is a limit, you've got a long way to go. Check out these guys:
http://discussions.apple.com/thread.jspa?threadID=812614&tstart=0
So whatever your problems, that ain't the cause.
Regards
TD

Maximum number of songs for muvo tx

I thought it would be impossible, but i managed to fit probably close to 2 hours of music on my muvo tx fm 52 mb. However, My muvo tx fm will only play a certain number of songs... it just won't see the rest. (for example, i have 7 folders full of music. my muvo tx fm only sees 6 of them.. even then in the sixth folder the muvo tx fm will only play one song.) Because of this i rule out a maximum number of folders. Will the muvo tx fm only play a certain number of songs or only play so many hours of music? I am currently converting about 20 mb of my songs to wma, as all my songs save one are in the mp3 format, and i am seeing if having maybe half of my songs in another format would help. I'll also try upgrading the firmware to see if this may fix it. But if someone has an answer now, it would be greatly appreciated. Thank you for your time.

I too am experiencing the same problem. I have a gig tx fm and the player will only recognize 50 folders. Anything beyond that is lost; however I can play the files thru WMP0 when the player is plugged in via usb. Furthermore, 3 or 4 of the 50 folders that are visible on the player just get skipped; the files contained in them won't play. These files aren't corrupt or anything, they too will play thru WMP0. I have tried the firmware update .3.03 which lists--[*]Displays recorded tracks accurately when the player contains more than 50 folders.</LI>
as one of the included fixes. This problem is really bugging me as I have maybe a handful of songs by a variety of different artists and would prefer to keep them in separate folders by artist. If, in fact, it is true that the MuVo will only support 50 folders my whole plan for music organization is out the window. Any ideas out there since last post?

How to copy songs that's already in the ipod into the computer hard disk?

I had some "music" mp3 files, so I put them into my ipod by using iTune. I pick a mp3 file and I drop it into the "MUSIC" section under the "iPOD" section, in iTune. After this, I didn't make any backup, for exemple, place them into the iTUNE's "MUSIC LIBARY" or copy them, place them into a file and store them into the computer's hard disk, because I only had one computer and I don't want to make to much spaces into the computer's hard disk, because the computer's hard disk did not have alot of memories available to use, it's almost fully loaded. Then I discovered that "I could't copy the existence files from the iPod and put them into the computer's hard disk", and I found this is ridiculous. So... can someone please telle me "how to copy or take the mp3 files out from the iPod and place theme into the computer's hard disk?"

So... can someone please telle me "how to copy or take the mp3 files out from the iPod and place theme into the computer's hard disk?"
To prevent auto sync, connect the iPod whilst holding down the 'control+shift' keys and do not let them go until your iPod appears in iTunes.
If you see a message that your iPod is associated with a different library and asks if you want to link to new one, make sure you press "Cancel".
If you should click on "Erase and Sync" will erase all the content currently on your iPod and it will be replaced with the content of the iTunes library you just connected to.
When you've pressed cancel your iPod should appear in the iTunes source list under "devices" and allow you to change the update setting to manage the iPod content manually, and that will let you use your iPod for the time being without the risk of accidentally erasing the contents.
Then do any of the following to transfer your music from iPod back to the computer/iTunes.
For iTunes version 7 or later, then you can transfer purchased iTunes store music from the iPod to an authorized computer by using the "file/transfer purchases from iPod" menu. Note that the maximum of 5 authorized computers applies here.
Find out how to do that here.
How to copy iTunes purchases from an iPod or iPhone to a computer.
For all other non purchased content (your own CDs etc), check out the instructions/suggestions here.
Music from iPod to computer (using option 2). This a manual method using "hidden folders" and although it works, it is a little more involved than other methods.
Much easier ways are to use one of the many 3rd party programs that copy music from the iPod to the computer.
One of the most recommended is Yamipod. This is a free program that transfers music from iPod back to the computer. However, it does not transfer playcounts/ratings etc.
Other free programs are Pod Player, SharePod and Floola and iDump.
If you want to recover just the structure of playlists from the iPod (and not the actual song files themselves), there's iRepo for Windows. which I understand has this feature along with all the standard features for these programs.
iPodRip also has the feature enabling you to reconstruct playlists.
There is also CopyTrans. This does preserve ratings/playcounts etc if those are important to you but this program is not free. It also supports video transfer.
More information is contained here.
Copying content from your iPod to your computer - The Definitive Guide.

Maximum number of parameters sent to stored procedure

I have a web form from where I insert data to Oracle. There are at least 20 fileds on the form. For INSERT I want to use Stored Procedure. But in this case for VALUES section of the INSERT statement I need to send that many- in this case 20 parameters. Is this normal for a procedure to receive 20 parameters? If it's not, then what way should I follow to perform this? I know technically there's no problem but is this normal programming or database managementwise? I think this is the basic thing all web developer do all the time.

He's got 20 fields on a web form and you think using SQL*Loader is a good idea ?because I do not believe that he has to enter these fields once time.
You want him to write the values to a flat file, generate a control file, then invoke SQL*Loader ?I know that the first time you create all those files can be a problem, but when you have all , the next times its just change the information into flat file.
Did you read the question ?Yes, i did
It's only my opinion, He can accept it or not.
any other question not related to help him to solve his problem?

HT1766 How do I load music on new hard disk from Ipod Classic or old hard drive without doing it manually song by song?

How do I load music from IPod Classic onto new HDD without having to load each song separately?

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

I am waiting for a new iMac with two drives: SSD conventional hard drive. How can I transfer only a certain number of applications to the SSD and the rest to the physical hard disk drive?

I am expecting a new iMac (i7 with SSD). How can I transfer only certain applications along with the system, library etc. to this limited (space) HD and other applications to the conventional disk HD in order to save space on the SSD?
Thank you,
Gilles

Tom Lassiter wrote:
I have the same scenario, using an SSD for my start-up drive. I have copied my Applications folder to a mechanical hard drive and created symbolic link to it. The symbolic link resides on the SSD and works properly.
That may not be the best solution. Many updaters expect apps, especially Apple apps, to be in the /Applications folder on the OSX drive; if there are updates, the apps may not be found, thus may not be updated. I don't know if the installers/updaters will follow a symbolic link or not.
DItto some apps, especially Adobe apps, won't even work if they're anywhere else. Again, I don't know if they'll follow a symbolic link, either.

I cannot sign in to my icloud with my old account it is saying maximum number of free accounts

i am not tring to recreate an icloud. my iphone had to be reset by ntelos and clear all my data off my phone. so now when i try to sign in to my icloud it will not let me sign in with my account that i used before my phone was reset. it is saying it has the maximum number of icloud accounts. but im not trying to make a new one . in am simply tring to sign in with the one i already have.

You can't delete an account, you can only stop using it. If you're getting that error message you won't be able to create a new account on your device. Your only options are to re-use one of the accounts previously created, or create a new account on a different iOS device or Mac (running OS X Lion or higher), if you have one.

Maximum number of generic report columns

Clicking the "Use Generic Column Names (parse query at runtime only)" radiobutton makes the "Maximum number of generic report columns" a editable field with a default of 60.
This seems to be a new feature in 2.0, right?
So, is 60 columns not the hard maximum number of columns in a report anymore? What is the new limit? What if I type 200 in that text box?
Thanks

and then use the column names as headings. We will
improve the usability of the report attributes page
in the next version of HTML DB and let users edit all
column attributes.While we are on the subject...
Re-ordering columns on the report attributes page is a huge pain. Doing them one at a time and page refreshing after each up/down arrow is very very slow.
Why dont you guys use some of the nifty drag-n-drop features from the Query Builder to do this re-ordering? That would be spiffy.
Another option is to just add a editable text field on each row to represent the column sequence #. I could just re-order a bunch of columns by changing this sequence number and click Save and the page refreshes and re-orders the list by this sequence number. Of course, there would need to be some Javascript to ensure that I dont give the same sequence number to more than 1 row.
[Netflix uses both the techniques above to let customers reorder movies in their queue]
Thanks,
Vikas

My Hard disk crashed and I didn't have all the songs backed up

I had to replace my hard disk and only had 3,000 or so songs backed up - I have a total of about 5,000 songs on my 30 Gig Video iPod. Many of the songs I didn't have backed up were purchased songs from iTunes. Is there a way to move those songs from my iPod to my new hard disk?
Dell Dimension 8250 Windows XP Pro 2.65 gigahertz Intel Pentium 4
Dell Dimension 8250 Windows XP Pro 2.65 gigahertz Intel Pentium 4
Dell Dimension 8250 Windows XP Pro 2.65 gigahertz Intel Pentium 4

This is what you will want to do, you will want to go into the tools menu in your windows explorer. Select folder options, click on the view tab. Once you are on the view tab, click on the folder that says hidden files and folders. On the hidden files and folders click show hidden files and folders. Then click ok on the folder options window. When you open the ipod now you will see the ipod control folder. In that folder there will be a music folder. Open that. There will be a number of folders that will begin with F00 you will want to go into the folder and you will see a bunch of song files with coded names. You will want to drag them to where it says library in itunes. The songs will automatically rename themselves to the correct name. Go through each one of the folders like this and your library will be restored.
The only thing that I would tell you is that this will duplicate all the songs in your library. So I would clear your entire library before you start this process

Please Help,how do i get my iphone 4 to play all my songs from icloud, it is currently only playing just a smal number of songs from my library which is stored in icloud.

Please Help,how do i get my iphone 4 to play all my songs from icloud, it is currently only playing just a smal number of songs from my library which is stored in icloud.

There are a number of OS X apps, many free, that will save your messages, allowing to view and print them.
http://www.softwarebbs.com/wiki/How_to_transfer_SMS_from_iPhone_to_Mac,_backup_i Phone_SMS_message_on_Mac
Google, for other options
Your "other" of 6 GB may include corrupted data or file sytem errors. If after removing the messages there is still >2GB, you will need to restore the phone in iTunes, first using a backup (made after deleting the messages) and if needed as a new iPhone.
iTunes: Restoring iOS software

Maximum number of cookies that can be stored

hi,
i would like to know what is the maximum number of cookies that can be stored in a browser or in a client machine? moreover i would like to know the disadavantage of using cookies?
can anybody please help me in this.
thank u in advance.
Fazlina

An extract from the web site http://www.ulct.org/resources/staff_notes/list/071201_cookies.html
- A maximum of 300 cookies can be stored on the user's system.
- No cookie can be larger than 4 kilobytes.
- No server or domain can place more than 20 cookies on a user's system. (One website can't hog all 300 cookies.)
- If you go beyond the maximum, the browser will just discard old cookies to make room for the new ones.
vj

Plsql dynamic region with more than the maximum number of items

Hi,
I need suggestions! :)
I have to make a page with many many items. We have a table storing the content of a SQL script, each statement is an individual row in the table. The page I'm trying to make must display each statement in an individual textbox/textarea (and two others items for different attributes).
In a dynamic plsql region, the maximum number of items seems to be 1990, after that, a "Page not found" is launched. So, after 643 statements, I reach the limit...! :(
A solution could be to generate "custom" textfield or textarea (htp.p('<input type=text name="stmt1" value="StmtText">');), but, is it possible to access their values when the page is submitted ?
Second solution is to make a pagination every 600 statements, but I don't like it!
Anything else ?
Thank you!
Jonathan

Anton,
at least to my knowledge there you will have the same limitation. Because the limitation is that the f procedure of APEX doesn't have more parameters to support more fields. It's not a limitation of the APEX Builder.
It would only work if you assign all your items to the same name, so that they are transfered in an array, like the tabular form.
Patrick
My APEX Blog: http://inside-apex.blogspot.com
The ApexLib Framework: http://apexlib.sourceforge.net
The APEX Builder Plugin: http://sourceforge.net/projects/apexplugin/

Maximum number of blocks for a bigfile datafile?

Hello,
In 10g, when using bigfile tablespaces, the maximum size of a datafile can be between 8TB to 128TB depending on the block size (2K to 32K). The formula given to calculate the max size of a bigfile datafile is:
Maximum datafile size = db_block_size * maximum number of blocks
So my question is how do you calculate the max number of blocks? Oracle documentation states that the max number of blocks is 4,294,967,296 (4 billion) 2^32. But where do they get this number from? I read, on a different site (not Oracle), that it is the addressing scheme used in ROWID that changed permitting the possibility of addressing 4 billion blocks instead of 4 million:
This is due to a new addressing scheme Oracle uses internally. Oracle ROWID, addressing a database object stored in a traditional SMALLFILE tablespace, divides the 12 bytes thusly: 3 bytes for the Relative File#, 6 bytes for the Block# and 3 bytes for the object. The same rowid addressing an object stored in a new BIGFILE tablespace uses the 9 bytes to store the Block# within the unique file, as there is no reason to use the 3 bytes for the Relative File# since there is only one file in that tablespace. Thus the new addressing scheme permits up to 4Gblocks (4,294,967,296) in a single data file and the maximum file size can reach 8 TB for a blocksize of 2K and 128 TB for a blocksize of 32K.
But, even with this explanation, 4 billion still makes no sense because using 9 bytes equates to 2^72 addressable blocks, not 2^32. Am I missing something?
Thanks,
Mark

Thanks for the answer.
I'm almost tempted to accept the explanation that the 4,294,967,296 addressable blocks is a 32bit platform limitation... Do you or anyone know of any official Oracle documentation explaining where they get this magic number from?

Maximum number of cards saved on account?

You've currently saved the maximum number of cards allowed for your account. To pay with a new card, remove one of your saved cards from your stored payment details. when his father put a new card says I have too saved the maximum number of cards and I deleted all the cards in Stored payment details
Post transferred from blog article;
subject/title edited accordingly.

SAME PROBLEM. I have no more saved cards yet I can't pay with a new one. So I have no more Skype number. Ahh, I can't help but be annoyed when Microsoft takes over things. Can someone provide a solution please? I need my Skype number and right now I can't receive calls at all.

Maximum number of songs to be stored in a reburnished Z-Xtra - New Hard disk of 100

Similar Messages

Maybe you are looking for