Maybe an obvious question about organizing...

OK... all my photos are in the library. So I make an album called "2008 Beach Photos" and carefully pick out the best photos and put them into my new album. I get it.
But a few months later and my library has grown too big, I need to trash some of the photos. But I don't want to trash any of the "good ones" that I've been organizing into albums (like "2008 Beach Photos").
Is there a way to look at the main library and know which photos have been put into albums so I don't trash the wrong ones?

Several ways
Rate the good ones and delete unrated ones
flag them and delete unflagged ones
Assign a key word to them and delete the ones without that key word
Etc
LN

Similar Messages

Maybe a simple question about M2T ?

Hi
I record in HDV on the JVC GY 101.
I store on the Focus Enhancements DR HD100 Hard disk recorder.
The footage I have is in HDV 25frames Progressive.
The hard disk stores as m2t file and I seem to need to use Mpeg streamclip to convert for Final Cut Pro HD.
I have a few questions about this.
1) What should i convert to with mpeg streamclip ? mov, dv m2v etc etc
2) What setting should I have on FCP with regards to screen size ? The converted clips are 1280x720. When I choose this setting on the sequence, I end up with small black bars left and right of the video on the canvas ???
3) I will also later have to add some digi beta footage which will be PAL, 720x576 Anamorphic.
4) What is the best resolution for me here ?
5) And will the quality of the original m2t file be downgraded by the mpeg streamclip ?
Thanks so much for your help
All the best
Simon

HDV isn't an "edit-friendly" format, meaning: HDV uses inter-frame compression, combined with a long group-of-pictures (GOP) of 15 frames (12 frames in PAL-equivalent). In intra-frame compression (as in DV, DVCPRO HD, etc.), each video frame is a complete image that stands alone. Inter-frame compression (which is also used in DVDs) uses only a limited number of complete image frames, the GOP determines that number. So, in HDV for example, with a GOP of 15 frames, 1 second of 30fps video contains only 2 complete frames, while the other 28 frames are determined by calculations used in conjunction with the Bi-directional ('B') and Predicted ('P') frames, which contain partial information on the changes in the video in between the 'I' frames which contain whole images. This process, of course, requires much more computer processing power than when editing DV, DVCPRO HD, Uncompressed, etc.
Editing video streams such as HDV (and XDCAM HD) is made difficult by the reduced number of I-frames. For example, if you make a cut in between the I-frames in the video clip, the computer has to then recalculate new I-frames that are placed at both sides of the cut. Converting on capture/after import to an intra-frame codec like DVCPRO HD, ProRes 422, or Uncompressed will reduce processing power and increase real-time performance, as well as give better performance when adding effects and performing compositing like chroma-keying.
A common rule of thumb in professional applications is to acquire in HDV, XDCAM HD, etc., but capture and edit in DVCPRO HD, ProRes 422, or even Uncompressed. Native HDV editing is not taboo by any means; it's just not as easy or robust -- especially with the LONG render times. Depending on what kind of work you do (and of course personal preference), you may not see much benefit by transcoding to another format.
Are you suggesting i have to convert each clip after capture?
Unless you have an HDV deck with HD-SDI and a capture card, you would have to convert each clip. Batch-conversion would be very useful for that.
Hope that helps.
tim

Comprehensive overview/question about organizing videos and movies

I've made a few movies here and there in the original iMovie, have made a fair amount of home movies using FCE. I have 20 years worth of videos scattered around on HI-8 formatting and some videos I downloaded from a hand held digital cheapo-movie cam. I'm to the point of trying to figure out the big picture on importing, structuring, storing, and sharing these files between iMovie, FCEHD 3.5.1, mobileme, my iPhone, etc.
I'm now wanting to start uploading movies to gallery.me.com. I started doing some of this before I got cancer last year. I'm basically restarting this whole process now that I'm beyond the rigors of chemotherapy and I'm trying to make a systematic approach to managing video files and already made movies. I have a lot of questions and would appreciate any insight you can offer in this discussion forum or if you recommend I copy this over to another discussion forum. I'm not sure to even begin hot to explain all this, so be patient as I try to start this process.
#1 - I've tried using iMovie 8 in the past. I ended up, somehow, with clips here, there, and who knows where. The original iMovie seemed rather straight forward and seemed to work in conjunction with iPhoto rather seamlessly. As iMovie made that big change some time back, I quickly backed out of using that program to manage clips as I couldn't find where they were stored and more importantly, they seemed to start disappearing after time. Is iMove 08 a good resource to manage clips or is it a bit of a dead end for people who are using various programs such as FCE and so forth? Seems the transparency of how the newer iMovie manages files is a bit not-so-transparent to me anymore and I simply am not finding many of the files in iMovie 08 that I can easily spot in iPhoto. Not sure what has happened there, but I can find the files in iPhoto and browse them, but NOT in iMovie 08. Help?
#2 - the only real reason I'm asking about iMovie at all is that I want to start uploading files from HI-8 tapes into my computer rather quickly and make simple basically unedited videos of what is on the Hi-8 tapes, then perhaps transport onto mobileme and/or make some DVD's. I did a few of those somehow before the cancer/chemo deal, but can't really recall the exact steps I took. Rough bout with cancer last year and my brain is a bit fried to be honest, not to mention all of this is a big hard to grasp deal for a RN who isn't trained in video stuff at this point in his life. Besides, I ended up having to reinstall my entire OS - long story. Bottom line, the few movies I do have on mobileme are in .m4v format. Not a big deal when using my mac at home, but notice that it causes iTunes to load onto my pc's at work or when visiting friends. Slow, clunky, and not sure how it wound up in that format. I'm thinking I did that somehow through iMovie or Quicktime 7 Pro. Before I go that route again, I need to ask about #3.
#3 - I just exported my first high definition video from FCE. I did so because we got our first new TV in 22 years, nice HD flat screen. I'm wanting to start understanding options for exporting videos onto mobileme. I got Quicktime Pro 7 and used the H264 or some option like that (file>share). It was able to take 1.5 gig high def video I did over my cancer journey and put it seamlessly onto mobileme. But it is in the .m4v video option which seems to cause some people and computers problems because of the whole proprietary iTunes angle. Is there a way around this being forced to use iTunes and simply share to mobileme gallery using .mov? I tried the file>export option, seems to want to use movie folder and I'm guessing that is another iTunes deal.
#4 - as I load files into my computer from HI-8 format and the newer cheap little HD dual SD card camera I got, those seem to either want to go into iMovie's folders (which I mentioned my confusion about above) or I can manually put them into a file structure that I'm slowly learning to build using FCE. I don't mind the FCE option and it seems logical. I still run into the problem of how to share web based content of the videos. Using iDVD is rather straightforward, but I'm wanting to use some kind of web centric approach to sharing my videos on the output and have one big file structure for organizing my files/videos on the input.
I notice that iMovie has many exporting/sharing options in its menu. Are they really any different/better/worse than what I have with quicktime Pro 7? Should I even try to utilize iMovie at all or simply go with the capture option on FCE? I at least can find the files and organize them with FCE.
I'm not sure how to further word this at the moment as I'm trying to better understand all this as I'm moving forward.
Any suggestions you might have at this point would be most beneficial. I'm sure as I get further into this, I'll start clarifying my own questions and thoughts.
Any resources you can point me to for newer (but not totally new) to video structure input/exporting on the mac?
Thanks,
Robert

Robert,
A lot of questions, perhaps to much to go into detail but,
I can second the views of AppleMan
Since iMovie 08 I finally am able to organize and categorize my clips in an easy way. Just recently I made a DvD for one of my grandchildren containing a selection of events from over the last to years. Really a joy (not only the kid ). This would have been a much larger job without that.
When I like to do real "sophisticated" movie editing I use FCE and pick up the clips from the eventsfolder from iMovie.
Of course if you are happy with FCE for organizing (I found that a bit hard), you always can use the File->export-> quicktime movie feature and use Quicktime for uploading to mobileme or use the File->export->Quicktime conversion function.
Also within iMovie you can use the: share ->export with Quicktime, and use that to export your movie in the format you prefer.
HtH
Ben
Message was edited by: Ben Bloks

Maybe a dumb question, about which power connectors to use, but....

This may sound like an incredibly dumb question, but here goes anyway....
I upgraded my system a few weeks ago, and will be slapping in a new ATI X850 Pro AGP card in a few days. My current graphics card is a p.o.s. Radeon 9550, so it doesn't have its own power connector or even a fan. My PSU is a dual-rail Antec model, and I'm wondering if it should matter any about how many or which devices I have connected to each power cable set. My psu came with cables to attach, only 2 of the 4 though are the 4-pin molex - the other 2 are pci-e power connectors I believe. Should it make a difference which or how many devices I connect to each cable? For ease of plugging in, I believe my DVDRW and CDRom are using 1 cable, and my ide drive and floppy are using the other cable. Also, I have a pci fan and a case fan running off 1 or the other. I'm likely to jump the power cable for the video card off the one the hard drive is using, unless someone has some suggestion to offer to the contrary.
If it makes a difference, can anyone recommend how they would have them connect?
My list of devices to plug in would be:
1)IDE HDD
2)Floppy
3)CDRom
4)DVDRW
5)Case Fan
6)PCI Fan
7)Video Card
Thanks for any thoughts! SAB - you seem to be the man on builds.....any ideas?

Well, I put the new card in and connected it on a cable with the optical drives. Also, I had unwittingly connected my cdrom on the same ide channel as my hdd , so I changed that so both optical drives are on the secondary ide.
So far, so good. 3dMark03 jumped up from 3300 with an overclocked Radeon 9550 to 10570 with the stock Radeon 850 Pro
I wish I could find some local source to purchase additional molex cords for my Antec SmartPower 2.0 psu, though - I've got 2 more 'outlets' just sitting there on the psu doing nothing, because the other cables are for pci-e, and I'm not using pci-e...... If I could buy some additional molex cables to plug in like the ones that came with it, I could have the vid card on its own cable....

I asked a question about organizing bookmarks in my toolbar bookmark. I'm not happy with the "help" I got. I'm very frustrated. I need to talk to a technician. How can I get in touch with one? Do you have contact information?

Can't find out how to organize my bookmarks. can't do it after updating. Person tried to help, we had long conversations, I sent lots of images, it got to where I think the answer given were not related to the problem. I asked for help from a technician or to give my emails to one. She won't do it and I can't get help. So I'm starting over. It shouldn't be this hard. I need someone else to help me.

re: How do I organize and delete bookmarks in my short toolbar list.
* https://support.mozilla.com/en-US/questions/884877
You say you have a lot of duplicate bookmarks, and want to know how to organize bookmarks, but from the pictures shown, I really only see a news subscription, some sample bookmarks in the bookmarks toolbar that you don't display on the toolbars so I don't see point in deleting anything there most of it are reports from the database or from a news subscription nothing of much concern, really. I would dump the news subscription if you don't use it.
How do you want to arrange your bookmarks, but you must keep within some boundaries of what was expected of the three major folders.
Bookmarks Menu -- this is your folder categorized bookmarks, originally all bookmarks were in this folder and the bookmarks toolbar was one folder within -- that has changed.
Bookmarks Toolbar -- intended to be visible on the toolbar with main bookmarks and folders spread out horizontally to save one level of drilling down into folders, with very few bookmarks and folders visible on the toolbar but quickly accessed. You can use the bookmarks showing essentially as buttons a few primary bookmarklets. You can have folder structure there so you could actually have thousands of bookmarks there within folders.
Unsorted Bookmarks (no folders within by intent not by restriction) -- new concept to not categorize bookmarks into folders because of bookmark tagging. Delicious.com will show you what they intended where you have lots of people. I think the concept of tagging breaks down with one person. The other reason bookmarks no longer had to be put into folders was the "AwesomeBar" feature of Firefox that is a great feature it will find bookmarks whatever folder they are in -- I hope you are familiar with it. You can throw bookmark separators into any folder but they are especially useful in the unsorted bookmarks folder, especially if you sort the folder. In other words a group probably within a date range.
So how do you see yourself categorizing your bookmarks ?
I'd like to get an idea of '''how many bookmarks '''you have altogether and how big your places.sqlite file is. To find out how many bookmarks you have all together bring up the Bookmarks Library list, place a colon (":") into the search field this will do a find on all of your bookmarks. At the bottom of the library window you will see the total number of bookmarks you may have to nudge the vertical scrollbar down, and as long as no bookmarks are selected you will see an '''item count'''.
Open your profile folder Help > Troubleshooting information... then click on "Open containing folder" then looking in bookmarkbackups folder and report size of last .json file in there -- hope you can see the extension the filenames have dates.
From the library list you can see if you actually do have a lot or any duplicated by eyeballing the list sorted by the location. You don't want to delete anything yet until you know what you want to do and what folders the bookmarks actually in, as you would not want to delete a categorized bookmark for an uncategorized one.
I have 1256 bookmarks, a bookmarks backup file (.json) is 1849 KB.
I have 750 of those bookmarks have a keyword shortcut -- most of my bookmarks may not actually be bookmarks to webpages.
Install the "Show Parent Folder" extension, it would be important for manually categorizing and deleting bookmarks.
*https://addons.mozilla.org/firefox/addon/show-parent-folder/
At some point you will want to install the "Sort Places" extension that allows you to sort folders recursively in a matter of seconds. Only sort when you want to sort, never automatically.
* https://addons.mozilla.org/firefox/addon/sortplaces/
Other extensions of interest for working with bookmarks are included in
* http://kb.mozillazine.org/Sorting_and_rearranging_bookmarks_-_Firefox
The columns in the bookmarks library list that I show are
:Name, Location, Parent Folder, visit date, visit count, Keyword, Description, Last Modified
The important columns for eliminating duplicates are
:Name, Location, Parent Folder, Keyword, Description
:if you have Tags then that column would also be important not to delete the bookmark
Sort on Location look for duplicates, expect you won't find as many as you thought you would, because Firefox makes it difficult to create duplicates if you use the bookmarks star. I wouldn't delete any until you really know what you want to do, if you have duplicate you would not want to delete one a primary location based on parent directory or the one you use with a keyword.
I don't really think you have much to delete in your toolbars list, they are basically examples. Would highly recommend you keep something in the bookmarks toolbar even though you are not displaying it.
The only case of having major duplicates are if you have imported bookmarks at the bottom of your bookmarks menu also named bookmarks menu or something similar. You would see that in the parent folder column -- you cannot sort on the parent folder column.

Question about organizing tab by url location.

Instead of just always opening all bookmarks and sorting by location I was wondering if I could set up an option were the bookmarks aren't just sorted by location but next time I go to the bookmark tab and hover over a folder that folder is sorted by location as well.
Don't know if there is a way to do this and I just think it's a preferable way to organize bookmarks to me. Hope anyone can help me out with this.

Look at this extension:
* SortPlaces: https://addons.mozilla.org/firefox/addon/sortplaces/

Questions about Assumption of Liability and device to be used for unlimited data plan

This is my first post on here. I have an opportunity that someone I know is willing to transfer his smartphone plan with unlimited data to me. I have read extensively on here and other sites and gathered some information, and also heard of many complications and questionable losses of unlimited data plans when making various types of changes to devices or services. Some of what I read may be outdated as well if Verizon has made changes in their policies, so I will start with the most obvious question: as of this date, is an AOL possible while keeping the unlimited data plan intact?
If so, here are some other questions I have:
-Will I receive a new SIM card by mail or do I need to use my friend's old SIM card?
-If my ultimate end goal is to use laptop, do I have to connect through a smartphone (and is there any additional charge for that, or would it change the plan), or can I put the SIM card in a mobile hotspot such as the MHS291L and use only the data portion of the plan?
-After getting the plan, is there any way I can get TWO SIM cards - one for a mobile hotspot, and the other strictly for voice and text? If so, how much extra would that cost?
-If we went to a Verizon store to do this transfer or AOL, how can we be absolutely certain it goes smoothly, that no one makes any unauthorized plan changes and does not lose the unlimited data? I have unfortunately read some horror stories of it being lost in similar situations, no one seems to be accountable, and it winds up costing someone countless hours of struggle with Verizon to try to get it back (whether they are successful or not I don't know).
-If at some point the SIM card was lost (such as if I lost the device), can it be replaced without affecting the plan?
For what it's worth (especially for those working for Verizon), I am not looking for a way to hog up absurd amounts of data but simply to be able to do the basic stuff I need to online and maybe watch a movie once in a while without having really huge bills. Even if I used the internet without giving data consumption a second thought, I doubt I'd go much over 25-30GB most months.
Thanks to whoever can provide me with information.

Hi NicandroN_VZW, sorry i did not see your reply in time but thank you just the same. I called the number for the AOL department and they were able to help me with it pretty easily and answer most of my questions
I do have a couple other questions regarding the unlimited data plan on smartphones. I have seen various comments regarding these things online, and i can make a good guess about what "might work," but i'm really looking to know Verizon's official policy on these things, if one exists. In case any non-verizon employees are able to provide this information as well, if you have references to where i can find it in writing that would be helpful.
First, i realize there is an optional $30 fee for mobile hotspot use. But does Verizon have any policy about whether this fee must be paid if i connect only via a USB cable (since it would not actually be a "hotspot," and could not connect multiple devices)?
And my other question is, if i do opt to pay the $30 hotspot fee, is there any policy either for or against using that SIM card in a 4g hotspot such as the MHS291L?
PS i am asking these things here rather than by PM because, given the wide range of opinions which can be found online and that others have looked into similar things, i am sure other people could also benefit from knowing Verizon's policy regarding these things.

Question about Domain file size...

I have a dot Mac account, and my iDisk capacity is 1 Gb.
As I regularly back-up my Domain file from my G5 iMac to a FW external drive that sits on my desk, I have just noticed that the file size is now just over 1 Gb.
Can someone please explain to me why I still have almost 700Mb left on my iDisk, yet my Domain file size is over 1 Gb?? Obviously, there must be 'internal' files that aren't copied to the iDisk.
Thanks,
Rachel.

Wow, that's quite a discrepancy. 1gb Domain vs. 300mb site? Well suffice it to say that the Domain file contains all the information that is needed to generate your site. But it makes me curious too why you have such a large discrepancy. Do you have a lot of video on your site?
My site is only about 50-60mb and my Domain is roughly the same size. When I first started using iWeb, I used to poke around inside the Domain file quite a bit more than I do now. You can open up your Domain file by Control-clicking it and selecting "Show Package Contents." At one point early on when I was blithely dragging and dropping stuff into iWeb and publishing just for experimentation, I noticed that even after I deleted images or EVEN WHOLE PAGES, that sometimes the Domain file would still contain images and quicktime movies left over from the deleted pages. I didn't know what was going on and actually tried to delete the "old" items from the Domain file, but I ended up with a non-functional Domain file...lots of error messages saying it was missing this and that. So I started over completely with a new Domain file. I also noticed at the time that my Domain file was several megabytes larger than my site.
Since then, I have been very careful only to drag items to iWeb that will actually be used. The Domain-to-site size ratio has stayed pretty much 1:1. So I chalked up my earlier experience as a fluke. I don't know. Maybe there is an inconsistency somewhere. In fact, do a search here on "Domain file optimizing" or "Domain file bloat" and you may be able to find my questions about the issue. I never did get any responses, though.

Type of HDD in Edge E130 and question about msata SSD

I'm interested in thickness of HDD in E130. I read that in E125 was 7 mm HDD and there is troubles with 9 mm. So, is E130 similar to E125(E130 is next-gen of this type netbooks, but there is huge posibility that Lenovo Engineers decided not to change HDD type)? Or 9 mm hard drive will work?
Installing msata breaks warranty agreement, doesn't it? And i have some, maybe, obvious questions amout msata SSD(i've read about installing SSD in other Thinkpad notebooks), but I need some proves for Edge E130:
1)Speed is limited by SATAII interface?
2)mSata drive as bootable device will work?
Last questions are not such important, but i'll happy, if Edge E130/E135 users will share their experience
Solved!
Go to Solution.

I bought the E130 as a travel computer, so I didn't have to travel with my X220T - which is a tank compared to this little fellow. I have the 3358-8dg model of the e130 (came with free-dos but I bought an extra 4GB Ram to up the total to 8GB). The HDD is the usual 7mm think ones as expected.
I've had my e130 for 2 days now and I removed the HDD it shipped with and installed a 64GB mSata instead.
Link to image
I then installed Win7 with SP1 from a USB in UEFI mode (see this thread: http://forums.lenovo.com/t5/Windows-7-Discussion/Prepare-an-usb-thumb-drive-to-boot-windows-7-or-8-i... - installed Lenovo System Update 5 and installed all drivers and software along with all windows updates.
So, running only an mSata HD and booting from it is not a problem at all.
My windows experience index is 4.9 due to the Graphics: Desktop performance for Windows Aero.
The HD transfer rate is 7.9.
The exact model of the mSata SSD I installed is: Crucial m4 SSD 64GB, mSATA 6Gb/s (CT064M4SSD3)
I hope this helps.
Moderator note: images totalling more than 50k converted to links per forum rules: Lenovo Community Participation Rules Also fixed broken link.

Question about opening a vi reference in a sub-vi in a loop

I have a weird question that has to do with a performance change I saw between Labview 7.1 and 8.2. Maybe someone knows something about this.
Basically when I upgraded to 8.2 I found a couple of memory leaks in my code. They didn't really cause memory to increase actually, but they caused labview to take several minutes to close if I hit the abort button. I tracked it down to a couple of spots where I was inadvertently calling a vi reference in a sub-vi in a loop.
So if I run this in either 7.1 or 8.2, I can call hundreds of thousands of instances of the vi ref in a loop.
But if I take the above code and sub-vi it like this:
Now if I run this for a couple seconds labview takes a long time to close, and if I run this for several minutes labview will basically hang entirely when I abort the vi.
But if I do the same thing in Labview 7.1 the performance is exactly teh same regardless of whether the open vi reference is in a sub-vi or not.
So what changed? I don't really care about the difference, as I probably shouldn't be doing this in a loop anyway, but what is different in 8.2 that caused the change?
-Devin
I got 99 problems but 8.6 ain't one.

Of course, but I am interested in knowing what changed, just for my own edification.
Obviously something changed between the two versions. And what is strange is that there is no problem at all opening millions of vi references as long as I am not passing the reference control out of a sub-vi terminal.
There is an openG function that did this exact function, and I was actually using it in one of the states in a state machine. So the state machine would continually go through a repeating cycle, and after several days I would start to notice labview would take forever to close if I stopped the vi. So its not like I did something as noticably dumb as the example I showed, but it is interesting to me what is actually occuring inside labview here, and why it didn't have a problem in 7.1. I find the more i know about the innards of labview's memory allocation and management, the easier it is to good-performing code.
-Devin
I got 99 problems but 8.6 ain't one.

Some questions about Muse

First of all, I would like to say that I am very impressed with how well Muse works and how easy it was to create a website that satisfies me. Before I started a daily updated website I thought I would encounter many problems I will not be able to solve. I have only had a few minor issues which I would like to share with you.
The most problems I have with a horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html). Marking and copying of a text is possible only on the last (top) layer of a document. The same situation is with widgets or anything connected with rollover state - it does not work. In the above example it would be perfect to use a composition/tooltip widget on the first page. Unfortunately, you cannot even move the cursor into it.
It would be helpful to have an option of rolling a mouse to an anchor (like in here http://www.play.pl/super-smartfony/lg-nexus-5.html and here http://www.thepetedesign.com/demos/onepage_scroll_demo.html). I mean any action of a mouse wheel would make a move to another anchor/screen. It would make navigation of my site very easy.
Is it possible to create a widget with a function next anchor/previous anchor? Currently, in the menu every button must be connected to a different anchor for the menu to be functional.
A question about Adobe Muse. Is it possible to create panels in different columns? It would make it easier to go through all the sophisticated program functions.
The hits from Facebook have sometimes very long links, eg.
(http://www.leftlane.pl/sty14/mclaren-p1-nowy-krol-nurburgring.html?fb_action_ids=143235557 3667782&fb_action_types=og.likes&fb_source=aggregation&fb_aggregation_id=288381481237582). If such a link is activated, the anchors in the menu do not work on any page. I mean the backlight of an active state, which helps the user to find out where on page they currently are. The problem also occurs when in the name of a html file polish fonts exist. And sometimes the dots does not work without any reason, mostly in the main page, sometimes in the cooperation page either (http://www.leftlane.pl/wspolpraca/). In the first case (on main page), I do not know why. I have checked if they did not drop into a state button by accident, moved them among the layers, numbered them from scratch and it did not help. In the cooperation page, the first anchor does not work if it is in Y axle set at 0. If I move it right direction- everything is ok.
The text frame with background fill does not change text color in overlay state (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html). I mean a source button at the beginning of every text. I would like a dark text and a light layer in a rollover, but the text after export and moving cursor into it does not change color for some reason.
I was not sure whether to keep everything (whole website) in one Muse file (but I may be mistaken?). I have decided to divide it into months. Everyone is in a different Muse file. If something goes wrong, I will not have any trouble with an upload of a whole site, which is going to get bigger and bigger.
The problem is that every file has two master pages. Everything works well up to the moment when I realize how many times I have to make changes in upper menu when I need to add something there. I have already 5 files, every with 2 masters. Is there any way to solve this problem? Maybe something to do with Business Catalyst, where I could connect a menu to every subpage independently, deleting it from Muse file? Doing so I would be able to edit it everywhere from one place. It would make my work much easier, but I have no idea jendak how to do it.
The comments Disqus do not load, especially at horizontal layouts (http://www.leftlane.pl/sty14/2014-infiniti-q50-eau-rouge-concept.html). I have exchanged some mails and screenshots with Disqus help. I have sent them a screenshot where the comments are not loaded, because they almost never load. They have replied that it works at their place even with attached screenshot. I have a hard time to discuss it, because it does not work with me and with my friends either. Maybe you could fix it? I would not like to end up with awful facebook comments ;). The problem is with Firefox on PC and Mac. Chrome, Safari and Opera work ok.
YouTube movie level layouts do not work well with IE11 and Safari 7 (http://www.leftlane.pl/sty14/wypadki-drogowe--004.html). The background should roll left, but in the above mentioned browsers it jumps up. Moreover the scrolling with menu dots is not fluent on Firefox, but I guess it is due to Firefox issues? The same layout but in vertical version rolls fluently in Firefox (http://www.leftlane.pl/sty14/polskie-wypadki--005.html).
Now, viewing the website on new smartphones and tablets. I know it is not a mobile/tablet layout, but I tried to make it possible to be used on mobile hardware with HD (1280) display. I mean most of all horizontal layouts (http://www.leftlane.pl/sty14/2015-hyundai-genesis.html), where If we want to roll left, we need to roll down. Is there a way to make it possible to move the finger the direction in which the layout goes?
On Android phones (Nexus 4, Android 4.4.2, Chrome 32) the fade away background effect does not work, although I have spent a lot of time over it (http://www.leftlane.pl/lut14/koniec-produkcji-elektrycznego-renault-fluence-ze!.html). It is ok on PC, but on the phone it does not look good. A whole picture moves from a lower layer instead of an edge which spoils everything.
This layout does not look good on Android (http://www.leftlane.pl/sty14/nowe-mini-krolestwo-silnikow-3-cylindrowych.html#a07). The background does not fill the whole width of a page. There are also problems with a photo gallery, where full screen pictures should fill more of a screen.
Is it possible to make an option of scroll effects/motions for a fullscreen slideshow widget thumbnails (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06)? It would help me with designing layouts. Currently, it can go from a bottom of a page at x1 speed or emerge (like in this layout) by changing opacity. Something more will be needed, I suppose.
Sometimes the pictures from gallery (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a06 download very slowly. The website is hosted at Business Catalyst. I cannot state when exactly it happens, most of the time it works ok.
I really like layouts like this (http://www.leftlane.pl/sty14/2014-chevrolet-ss%2c-rodzinny-sedan-z-415-konnym-v8.html#a03). On the top is a description and a main text, and the picture is a filled object with a hold set at the bottom edge. That is why there is a nice effect of a filling a whole screen- nevertheless the resolution that is set. It works perfect on PC, but on Android the picture goes beyond the screen. You can do something about it?
In horizontal layouts (http://www.leftlane.pl/sty14/dig-t-r-3-cylindrowy-silnik-nissana-o-wadze-40-kg-i-mocy-400- km.html) holding of a filling object does not work. Everything is always held to upper edge of a screen regardless the settings. Possibility of holding the picture to the bottom edge or center would make my work much easier.
According to UE regulations we have to inform about the cookies. I do not know how to do it in Muse. I mean, when the message shows up one time and is accepted, there would be no need to show it again and again during another visit on the website. Is there any way to do it? Is there any widget for it maybe?
The YouTube widget sometimes changes size just like that. It is so when the miniature of the movie does not load, and the widget is set to stroke (in our case 4 pixels, rounded to 1 pixel). As I remember ( in case of a load error) it extends for 8 pixels wide.
Last but not least - we use the cheapest hosting plan in Business Catalyst. The monthly bandwidth is enough, although we have a lot of pictures and we worried about it at first. Yet we are running out of the disk storage very quickly. We have used more than a half of a 1 GB after a month. We do not want to change BC for a different one, because we like the way it is connected with Muse. But we do not want to buy the most expensive package - but only this one has more disk space. We do not need any other of these functions and it would devastate our budget. Do we have any other option?
I’m using Adobe Muse 7.2 on OS X 10.9.1.
and I'm sending Muse file to <[email protected]>

Unfortunatley, there is no way to get a code view in Muse. I know quite a few people requested it in the previous forum, but not really sure where that ended up. Also, you may not want to bring the html into DW unless you only have 1 or 2 small changes 2 make. Two reasons. First, it isnt backwards compatible, so if you are planning on updating that site in Muse, you will need to make those changes in DW everytime you update. Second, by all accounts the HTML that Muse puts out is not pretty or easy to work with. Unlike you, I am code averse, but there was a lenghty discussion on the previous forum on this topic. I know they were striving to make it better with every release, just not sure where it is at this point.
Dont think I am reading that second question right, but there was a ton of info on that old site. You may want to take a look there, people posted a ton of great unique solutions, so it worth a look.
Here is the link to the old forums- http://support.muse.adobe.com/muse

A question about the impact of SQL*PLUS SERVEROUTPUT option on v$sql

Hello everybody,
SQL> SELECT * FROM v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE    11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
OS : Fedora Core 17 (X86_64) Kernel 3.6.6-1.fc17.x86_64I would like to ask a question about the SQL*Plus SET SERVEROUTPUT ON/OFF option and its impact on queries on views such as v$sql and v$session. Here is the problem
Actually I define three variables in SQL*Plus in order to store sid, serial# and prev_sql_id columns from v$session in order to be able to use them later, several times in different other queries, while I'm still working in the current session.
So, here is how I proceed
SET SERVEROUTPUT ON; -- I often activate this option as the first line of almost all of my SQL-PL/SQL script files
SET SQLBLANKLINES ON;
VARIABLE mysid NUMBER
VARIABLE myserial# NUMBER;
VARIABLE saved_sql_id VARCHAR2(13);
-- So first I store sid and serial# for the current session
BEGIN
    SELECT sid, serial# INTO :mysid, :myserial#
    FROM v$session
    WHERE audsid = SYS_CONTEXT('UserEnv', 'SessionId');
END;
PL/SQL procedure successfully completed.
-- Just check to see the result
SQL> SELECT :mysid, :myserial# FROM DUAL;
    :MYSID :MYSERIAL#
       129   1067
SQL> Now, let's say that I want to run the following query as the last SQL statement run within my current session
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;According to Oracle® Database Reference 11g Release 2 (11.2) description for v$session
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_3016.htm#REFRN30223]
the column prev_sql_id includes the sql_id of the last sql statement executed for the given sid and serial# which in the case of my example, it will be the above mentioned SELECT query on the employees table. As a result, right after the SELECT statement on the employees table I run the following
BEGIN
    SELECT prev_sql_id INTO :saved_sql_id
    FROM v$session
    WHERE sid = :mysid AND serial# = :myserial#;
END;
PL/SQL procedure successfully completed.
SQL> SELECT :saved_sql_id FROM DUAL;
:SAVED_SQL_ID
9babjv8yq8ru3
SQL> Having the value of sql_id, I'm supposed to find all information about cursor(s) for my SELECT statement and also its sql_text value in v$sql. Yet here is what I get when I query v$sql upon the stored sql_id
SELECT child_number, sql_id, sql_text
FROM v$sql
WHERE sql_id = :saved_sql_id;
CHILD_NUMBER   SQL_ID          SQL_TEXT
0              9babjv8yq8ru3    BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;Therefore instead of
SELECT * FROM employees WHERE salary >= 2800 AND ROWNUM <= 10;for the value of sql_text I get the following value
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES);Which is not of course what I was expecting to find in v$sql for the given sql_id.
After a bit googling I found the following thread on the OTN forum where it had been suggested (well I think maybe not exactly for the same problem) to turn off SERVEROUTPUT.
Problem with dbms_xplan.display_cursor
This was precisely what I did
SET SERVEROUTPUT OFFafter that I repeated the whole procedure and this time everything worked pretty well as expected. I checked SQL*Plus documentation for SERVEROUTPUT
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Could anyone kindly make some clarification?
thanks in advance,
Regards,
Dariyoosh

>
and also v$session page, yet I didn't find anything indicating that SERVEROUTPUT should be switched off whenever views such as v$sql, v$session
are queired. I don't really understand the link in terms of impact that one can have on the other or better to say rather, why there is an impact
Hi Dariyoosh,
SET SERVEROUTPUT ON has the effect of executing dbms_output.get_lines after each and every statement. Not only related to system view.
Here below what Tom Kyte is explaining in this page:
Now, sqlplus sees this functionality and says "hey, would not it be nice for me to dump this buffer to screen for the user?". So, they added the SQLPlus command "set serveroutput on" which does two things
1) it tells SQLPLUS you would like it <b>to execute dbms_output.get_lines after each and every statement</b>. You would like it to do this network rounding after each call. You would like this extra overhead to take place (think of an install script with hundreds/thousands of statements to be executed -- perhaps, just perhaps you don't want this extra call after every call)
2) SQLPLUS automatically calls the dbms_output API "enable" to turn on the buffering that happens in the package.Regards.
Al

Question about full cycle charges and battery life

So I've had the new iPad since day 1 and absolutely love it, though recently I've noticed that my battery life doesn't seem to hold up as well as it has in the past. I've done three full cycle charges since getting it however during my latest one I accidently brought along my iPod wall charger and not the one that comes with the iPad. My iPad was fully discharged and I plugged it in assuming that in the 7 hour window I had that it would be fully charged within 5 hours, but this was not the case due to me having the wrong charger. After about 7 hrs of charging it was only at around 60-70% so I had to unplug it, bring it home, then plug it in once more using the correct charger. Probably a fairly obvious question but does this not count as a full cycle charge because I unplugged it? Should I perform another full cycle charge even though this most recent one was not even a week ago. I know you're supposed to completely discharge your battery as few times as possible so it worries me having to do it again so soon.
About battery life, I've noticed lately that my iPad battery seems to be depleting quicker than normal, and was hoping that perhaps this was caused by being overdue for a full-cycle charge which I may have flubbed as seen above. I'm aware of a majority of the little tips and tricks to prolong battery life however I'm not so knowledgeable on the "do's and don'ts" of charging the actual iPad so any information on that would be helpful. I should also note that unfortunately I accidently left by iPad in a hot car for a little over an hour and was tremendously devastated knowing what this can do to the battery, so could this be the main cause for a seemingly weaker battery?
Thanks for any feedback!

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

General question about iTunes Match and multiple libraries

Hello to everyone,
I have a general question about the iTunes Match service, which is available since yesterday in my country (Italy). Currently my library situation is the following:
Computer A (desktop, Windows 7): "big" iTunes library (about 20 GB), at the moment not associated with my Apple ID
Computer B (MacBook Air 2011): "small" iTunes library (about 5 GB), associated with my Apple ID
At the moment, both my iOS devices (iPhone 4 and iPad 2) are synchronized with the smaller library on the MacBook Air.
Question is as follows: should I subscribe to iTunes Match, would it be possible to upload the "big" library (provided I associate it with my Apple ID) to iCloud while keeping my devices synchronized with the "small" one?
Ideally, at the end of the day, the situation should be the following: both iOS devices with music from the small library + possibility of downloading songs from iCloud (coming from the big one). Is this possible?
Maybe the question sounds stupid, but I want to be sure about this before paying for the service.
Thanks a lot.

Yes, you could also associate your larger library with iTunes match if you associated your Apple ID with it. However any purchases in the library made from another Apple ID will not be matched with iTunes much.
If both libraries are part of iTunes match, then all your devices will see all of the content from both libraries, which content you choose to have on those devices and which you have accessible via iTunes match is entirely up to you.

Question about using multiple iPods on the same PC

I've read the FAQs on this subject but I still have a couple of questions about multiple users with separate iPods using the same PC.
I want to use my family's desktop (A new Gateway with Vista, if it matters) for my new iPod Classic, but my father already has an iTunes account on there for his iPod. I know I can create a new user account on the PC and move iTunes to a shared folder so that we can share music, but will this second account be able to purchase music from the iTunes store or am I going to have to switch between Windows User accounts to make purchases and then move new songs into my separate iTunes account via the shared folder? Will it be its own separate iTunes account (separate user name, separate credit card used, etc.) or will it just be a second library that's dependant on the first?
I want to be able to have my own iTunes account, make my own purchases in it, and maybe occasionally share tv shows or something with my father.
If this can't be done, would I be better off just creating new playlists for our two iPods from the same library, or creating a second library on my Father's account?
Also, if I want to access things I've purchased from iTunes on this desktop in iTunes on my notebook, will I be able to?
I hope that made sense.
Sorry if these seem like silly questions. This will be my first iPod as I'm really excited about the 160gig and want to know if these things are possible.
Thanks in advance for any help

Hi, Wes.
Congratulations on your new iPod Classic and Welcome to the Apple Discussions.
For no particular reason, let's answer your last question first ...
... if I want to access things I've purchased from iTunes on this desktop in iTunes on my notebook, will I be able to?
The iTunes Store operates on a one download per purchase policy so you will have to copy the purchases from one computer to the other and make sure that you authorize the laptop to play the songs.
As to your first question ...
... will this second account be able to purchase music from the iTunes store or am I going to have to switch between Windows User accounts to make purchases ...
Whatever XP User Account you are logged in to doesn't really matter. What's important is which Apple Account you sign in to ... yours or your Dad's or - if you had my Apple ID and password - The Mimico Kid's for that matter. You can sign in to any Apple Account on any XP User Account. Or any computer for that matter.
Where the XP User Account comes into play is that it will determine where on your computer the purchases are downloaded. Files will be sent to the iTunes Music folder as specified in the iTunes Edit menu > Preferences > Advanced tab > General sub-tab. Default settings will have a different location for each User Account - C:\Documents and Settings\ user name \My Documents\My Music\iTunes - but if you've read this article in the Apple Knowledge Base, you will know you can change the location of the iTunes Music folder in each XP Account to a common location such as C:\Documents and Settings\All Users\Documents\My Music\iTunes.
Post back if all this hasn't been as clear as mud and you need anything clarified.

Maybe an obvious question about organizing...

Similar Messages

Maybe you are looking for