MBA CAN'T GET ON MS REMOTE DESKTOP DUE TO ACTIVEX

I typically used my Toshiba to access my office through MS Remote Desktop. I have upgraded to a MBA (after many years of suggestions from my children) but find that when I try to access my computer at work I get the message " This portion of Remote Web Workplace requires the Microsoft Remote Desktop ActiveX control. Your Browser's security setting may be preventing you from downloading ActiveX controls. Adjust these settings, and try to connect again."
I find no settings to adjust on Safari re ActiveX controls. Hence, trying again did not help. Obviously, I am missing something. Can anyone assist in allowing me to access my PC at work from the MBA?

I don't know about your work setup, but you might be able to use Microsoft's RDC http://www.microsoft.com/mac/products/remote-desktop/default.mspx.

Similar Messages

I have connected my new Macbook Air to my existing Samsung large external monitor with a VGA adaptor but I can't get the full mac desktop to display. No icons but then websites are coming up. Help!

I have connected my new Macbook Air to my existing Samsung large external monitor with a VGA adaptor but I can't get the full mac desktop to display. No icons but then websites are coming up. Help! Further info: I am a complete newbie to Mac. Had three macs prior to 2000 then four PCs. Just come back and struggling a bit with the unfamiliarity. On my old PC laptop I could simply switch from the laptop screen to the large external monitor (and back) with the F4 function key. While I can get the background image from my MBA to display, that's it. Until I noticed on the far left of the external monitor, the very edge of one of the web pages I was on. So Idragged it over to display in the centre. But that's all that's there. And now I have gone out of those web pages but they are still displaying on the monitor. There is some wierd disconnect. I'm sure it is just a setting thing. Will keep searching for answer but any advice welcome!

Your dsplay is getting extended onto the external monitor. Chcnage the setting to duplicate it or only display on the external monitor and you should be fine,
Let me know if this worked for you.

TS3112 I tried using sudo rm to get rid of remote desktops but the terminal responded as needing password and yet would not let me type in anything. help please.

I tried to type in details but unable to do so. we lived in a gated apt buildings in Hi with 24-hour security guards and cameras. This false sense of security led us to foolishly leave the computer on all the time, not log off even when out shopping. Never expect people would open our locks (three locks) and walked into our apt while we were out. We have dishes, clothes and corning vision cookwares missing. We have all our important docs including computer serial numbers. We noticed our computer not respond and files and applications move around. We know they are not done by themselves and looked into console log list. The person who remotely logs or links with our computer thought that we are old folks and knew little about how to discover their act. Tried many times to get rid of it but was not successful. Finally today we hauled our imac to the apple store and explained the need to get rid of remote desktop. All went well and we thought our computer is at a factory installed state. We forgot to start firewall, probably did not disconnect third party help status (apple store third party). Forgot to write down cable provider IP and resulted in using wi fi. Look into system log list and other diagnostics messages and found an mac book pro and went back to see if I can write down the entire message but this time it went blank. system log blank, library logs blank and /var/logs blank and so is user log. Activity monitor froze would not open. We had it clean up in apple store today november 18, 2013. We have an Imac and don't know anyone who owns mac book pro with log message dated on oct 22. The question is how it still hangs around after reset at the apple store and how to get rid of it and if it is possible? greatly appreciated.

The Terminal is letting you type it in. It just doesn't display anything when you do.
(92983)

How can i get a replacement remote for my apple tv

how can i get a replacement remote for my apple tv?

Welcome to the Apple Community.
You can purchase them from the on-line or bricks and mortar Apple Store.

Can't log on with administrator user by finding the message "The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on.

Hi,
Now, my Windows 2008 R2 Enterprise server are running in the domain. It have problem about some one in my team have remote my server with the user administrator while I'm remote it now. It make my session loss. I tried to remote it again but I found
the message at the log on screen about "The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on."
Now, nobody can't remote with administrator user into this server. I have check the application log. I found the error message like this.
++++++++++++++++++++++++++++
Source: Desktop Window Manager
Event ID: 9003
Detail: None The Desktop Window Manager was unable to start because a composited theme is not in use
++++++++++++++++++++++++++++
Source: Microsoft-Windows-Winsrv
Event ID:10002
Detail: The following application was terminated because it was hung: mmc.exe.
++++++++++++++++++++++++++++
Source: Microsoft-Windows-Winsrv
Event ID:10002
Detail: The following application was terminated because it was hung: javaw.exe.
++++++++++++++++++++++++++++
Source: Microsoft-Windows-Winsrv
Event ID:10002
Detail: The following application was terminated because it was hung: Explorer.exe.
++++++++++++++++++++++++++++
Source:Desktop Window Manager
Event ID:9009
Detail:The Desktop Window Manager has exited with code (0x40010004)
++++++++++++++++++++++++++++
Source:Microsoft-Windows-Winlogon
Event ID:6005
Detail:The winlogon notification subscriber <Sens> is taking long time to handle the notification event (Logoff).
++++++++++++++++++++++++++++
In addition, I can log on this server with other user but I can't log off by it's showing the message "please wait for the system Event Notification service". Normally, the problem can solve by reboot the server. But how can be solve this problem
by we do not reboot the server?

Hi,
The cause of unable to remote back to the server seems to be services hung, please try to reset session as the article below guides to see if it works:
Windows Server: Remote Desktop Error: The task you are trying to do can't be completed because Remote Desktop Services is currently busy
http://social.technet.microsoft.com/wiki/contents/articles/28636.windows-server-remote-desktop-error-the-task-you-are-trying-to-do-can-t-be-completed-because-remote-desktop-services-is-currently-busy.aspx
If the issue can always be re-produced, then I would suggest you fully patch the system.
More information for you:
The task you are trying to do can't be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log on
https://social.technet.microsoft.com/Forums/windows/en-US/c58bfbd5-1d63-47e3-a489-6d8c8778b76b/the-task-you-are-trying-to-do-cant-be-completed-because-remote-desktop-services-is-currently-busy?forum=winserverTS
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

I am running OS X 10.5.8 and don't see an iCloud icon in my system preferences. I do see a Mobileme icon but I would like to have all my mac devices on iCloud. How can I get iCloud on my desktop?

I am running OS X 10.5.8 and don't see an iCloud icon in my system preferences. I do see a Mobileme icon but I would like to have all my mac devices on iCloud. How can I get iCloud on my desktop?

iCloud requires 10.7.2 or later. See the following about how to upgrade:
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Can you get lightroom on your desktop with the $9.99 a month creative cloud membership?

can you get lightroom on your desktop with the $9.99 a month creative cloud membership?

fliplip1 wrote:
hhmmm. possibility, buT why? It's there in black and white, it just takes a few more mins to read it.
I guess there are multiple ways in which people interpret the same sentence. Not everything is obvious to everyone.
If confused, people generally ask in the forums.

How can I get my apple remote to stop running my Mac when I am trying to use airplay?

How can I get my apple remote to stop running my Mac when I am trying to use airplay?

http://support.apple.com/kb/PH14076

How can I set up a remote desktop

I would like to log into my company server through their remote desktop VPN.
How do I get to the remote desktop set up.

http://www.microsoft.com/mac/downloads?pid=Mactopia_RDC&fid=68346E0D-44D3-4065-9 9BB-B664B27EE1F0#viewer

How can I get my iTunes remote to work on my laptop?

I have a remote for my desktop that controls iTunes on it, however I rarely use it because I recently got a Macbook Pro. How can I get the remote to control iTunes on my Macbook?

The desktop remote will only work with your desktop. If you purchased a new Macbook Pro, its remote is sold seperately.
At one time, the remote was included. Unknown when it all changed.

Apple TV, iPad, iPhone home sharing how to wake a sleeping mac from these devices? Can wake from iMac using remote desktop fine.

Hello all!
To give you an over view of system I have, iMac, Mac Mini, Apple TV 3, ipad 1, IPhone 4.
I have all music and video stored on the mac mini that is in the roof and I control it using apple remote desktop from my iMac. I can wake it no problem etc and I have now been using it with home sharing and it works fantasticly with the apple tv and ipad etc but the issue is as follows.
How can I wake the mac mini in the roof from the apple tv when it dissapears off the ipad / apple tv when it goes to sleep?
Its the only issue I can see in an amazing setup that I think apple needs to advertise more as its flipping brilliant!
I hope you can help me with this other wise I will have to leave the mini on 24/7 which is poor!
Please don't say turn wake fromlan on the mini as its on and working.
Thanks for any help!!
Spoony

This problem, for reasons unknown to me, has resolved itself on its own. After several attempts finally everything decided to work. How does stuff like this happen? Thank you.

Can iPads and Smartphones Access Remote Desktop Through "Access Anywhere" RDWeb?

Is Remote Desktop Gateway required to log into a Windows 7 workstation remotely or can you connect from a mobile device using only the "Acess Anywhere" features built into Essentials Sever 2012 R2 using the Microsoft Remote Desktop App in downloaded
from the app store?

Hi,
Thank you for posting in Windows Server Forum.
Yeah we can access RD Web by using MRD for MAC, IOS and Android. Just we need to install the application on respective device and can access by Remote Resource. Please follow TechNet article where you can find the details.
Microsoft Remote Desktop Clients
http://technet.microsoft.com/en-us/library/dn473009.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

I've seemed to have deleted my iPhoto app and can't get back to my desktop. It had numerous pictures of mine included and can't find them in my hard drive where do i find it and restore it?

I've been trying to do some cleanup on my mac, and somehow have removed my iPhoto from my desktop and can't get it back, i don't know how to get it back. I've had years of pictures on it and am going to be pretty hot if i can't get it back up.

Is it in your Applications Folder?
If not
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.

I was installoing ML and it came up, ' Install Failed' Mav HD damaged and cant be repaired. I now can't get back to my desktop. What do I do? Desparate!

I was Installing ML and it came up, 'Install 'failed'. Mac HD is damaged and can't be repaired. I cannot get back to my desktop, this keeps coming up. What do I do, I'm desparate! Urgent.

After you resetted your router you should try adjusting the wireless settings on your router...
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
-Here select manual configuratioon...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Wide-40MHz and change the Wide channel to 9 and Standard Channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on save settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation...
Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...See if you get the desired speed...If not you should un-install and re-install the wireless adapter...

PSCS3 Mac: Can't get Applescript to open "desktop:folder:file.jpg"

I have Photoshop CS3 and am scripting a lengthy workflow, and part of it requires that I get Metadata out of files using Photoshop.
I can not get Photoshop to open a file. Once I have the file open, I can get the metadata out using UI scripting, but I have tried numerous approaches to open files and it has me stumped.
I am making it as a function that I can call from the main script which compares a new list of files with a list that is a few minutes old to determine which files are new and repeats with each file in the list. So the function will be getting a file name or a path.
Any help would be greatly appreciated!
Brian

I got it! It needs to be an alias class path, and I had to concatenate the path incrementally before finally the whole path is in one variable I could coerce into an alias.
Of course, this is just one segment of the whole workflow.
tell application "Finder"
activate
set fileList to name of (items of folder "to gallery" of desktop)
repeat
set newFileList to name of (items of folder "to gallery" of desktop)
if length of newFileList > 0 then
repeat with thisFile in newFileList
if thisFile is in fileList then
else
my PSInfoGalAdd(thisFile)
end if
end repeat
set fileList to newFileList
end if
delay 30 --This will eventually be 4 minutes
end repeat
end tell
on PSInfoGalAdd(thisFile)
tell application "Adobe Photoshop CS3"
activate
set desktopPath to path to desktop
set toGalPath to desktopPath & "to gallery:" as string
set wholePath to toGalPath & thisFile
set openIt to wholePath as alias
open openIt
tell application "System Events"
tell process "Adobe Photoshop CS3"
key code 34 using {command down, option down, shift down} --File info window
delay 4
repeat 12 times
key code 125 --down arrow to Origin
delay 0.2
end repeat
repeat 5 times
key code 48 --tab to credit
delay 0.2
end repeat
key code 8 using command down --copy
delay 0.3
set credit to the clipboard
repeat 3 times
key code 48 --tab to instructions
delay 0.2
end repeat
key code 0 using command down --select all
delay 0.3
key code 8 using command down --copy
delay 0.3
set headline to the clipboard
key code 48 --tab to transmission reference
key code 0 using command down --select all
delay 0.3
key code 8 using command down --copy
delay 0.3
set body to the clipboard
key code 48 --tab
key code 36 --return key to dismiss info window
end tell
end tell
end tell
end PSInfoGalAdd

MBA CAN'T GET ON MS REMOTE DESKTOP DUE TO ACTIVEX

Similar Messages

Maybe you are looking for