MBP at Snow Leopard - Can's Access Files?
I know I need to upgrade my MBP - but mine is a 17" model under Snow Leopard. I have a new iPod touch in iOS 8.xx that gets me to iCloud.
So I can upload to iCloud the photos and stuff from it. But is there any way I can access iCloud files with my MacBook Pro? I can log in manually to icloud.com and see my mail ... And actually created a new folder for files.
Many thanks.
Attach an external hard drive to the iMac. Boot from the Snow Leopard disc again, launch Disk Utility, go into the Restore tab, select the internal drive as the source, select the external drive as the destination, and restore. Then partition -- do not merely erase -- the internal drive, and see whether you can install onto it. If you can, use Migration Assistant to restore your data from the backup.
Not backing up = inevitable data loss.
Similar Messages
-
I have a mac os 10.5.8, i want to upgrade to mac os snow leopard, can i keep all my files (documents, music on itunes) without backing up all the files first on a external device prior to the upgrade?
I strongly advise against upgrading the OS without first making a backup. Were something to go wrong you would lose all your files without the backup. See:
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s). -
Snow leopard can't be installed on my machine.
Alright, here goes. Thank you in advance.
BACK STORY:
I have an Intel iMac. I've had it for a few years and it's always been awesome. I was running Leopard, and it was all gravy. So much so, that I even took it in to my Apple store to see if there was anything I needed to do to protect my machine, or if there were any updates for my machine that I should purchase. Dude at genius bar said yea, there is an iLife update and a new version of OS, Snow Leopard. He told me he would update my macbook (which was getting a new hard drive put in) for me and show me how to do it, so that when I got home with my iMac, I could do the same update to it. iLife 11 and Snow Leopard installed perfectly on my Macbook (my secondary computer). I tried to installed Snow Leopard verbatim what the Apple associate showed me, with his written directions. Popped in my disc, selected English, install began, got about 1/3 of the way through the progress bar and an error message came up reading "Snow Leopard can't be installed on this machine". Interesting. Apple store guy said I was good to go?
DIAGNOSIS FROM APPLE STORE:
I took my iMac back to the apple store the next day, with my macbook incase I needed to run a firewire from iMac to Macbook to transfer files. Dude tried to save some of my data but couldn't access it. He told me there was a OS conflict and he was unable to archive and install. He gave me a card with all the information for a data recovery service and told me I was SOL. Great. I took my mac in to make sure it was good to update, he said yes, and then I did it, in turn frying my main computer into a useless paperweight.
FUNCTIONALITY:
When I try to turn on my iMac now, it goes to a grey screen with an apple and a spinning gear. This screen stays up for about 45 seconds and then the computer shuts off. I've connected a firewire to the iMac and my Macbook and held the T key down in an effort to save my photos and music etc. The firewire symbol comes up on the iMac, but nothing appears in my finder on my Macbook like an external hard drive would. If I put the Snow Leopard disc in, and hold the T key, the Snow Leopard disc will show up in my Macbook's finder/desktop. If I put the Snow Leopard disc in the iMac and boot it up the computer just shuts down, even if I hold the C key. If I boot with the Leopard disc and hold C, the disc will mount and I can re-install Leopard, but I get a warning that all of my data will be erased in doing so. Obviously I don't want to part with 200+ GB of data. My last back up was about a month before all this so it won't be the end of the world but there are photos and other things that are recent to my hard drive with no back up and that I'd rather not lose if I don't have to.
BASIC INFORMATION:
I'm 24 with a bachelors degree and I am very comfortable with my mac. AKA you don't have to reply like you're teaching your grandma how to email.
My iMac IS an Intel iMac.
I have 47 GB of free space on it, plenty of room for an OS update.
Firewire ports are FW400 on both computers.
I had to archive and install Leopard once about a year ago on my iMac. Not sure why there was issue, but the problem was fixed when I did this.
So, do I have any options here besides erasing my hard drive? Has anyone ran into this before. Sorry for the rant. Thank you again.Attach an external hard drive to the iMac. Boot from the Snow Leopard disc again, launch Disk Utility, go into the Restore tab, select the internal drive as the source, select the external drive as the destination, and restore. Then partition -- do not merely erase -- the internal drive, and see whether you can install onto it. If you can, use Migration Assistant to restore your data from the backup.
Not backing up = inevitable data loss. -
After upgrade my MBP from snow leopard to mountain lion all my smb connections stop to work.
After upgrade my MBP from snow leopard to mountain lion all my smb connections stop to work.
Now iám using mac os 10.8.2
I can see the server, I can choose the drive, but when try to open a folder the message on Finder is: You don't have permissions to see the content.
I already delete the key and try to connect again, but the problem persist. Already try change the ip from file server. Already try differents users. (admin, guest, etc...)
I have a windows server 2008 and a NAS working with SMB protocol. Both with the same problem.
That problem occurs only on Finder, if I try see the folder by Terminal, is possible to see my files.
Any Solution ?
Any Tip ?
Any Question ?Not knowing how much RAM is installed in your iMac, your iMac can take a total of 8 GBs of RAM.
Before upgrading to Mountain Lion, I would strongly suggest installing the maximum 8 GBs of RAM.
Correct and reliable Mac RAM can be purchased from online Mac RAM sources Crucial memory or OWC (macsales.com).
Here is OWC's link to your model iMac and the RAM modules you will need.macsales
http://eshop.macsales.com/item/Other%20World%20Computing/8566DDR3S8GP/
You can purchase and download OS X 10.8 Mountain Lion from the Mac App Store in the OS X dock.
Before installing, it would be prudent to make a backup copy of all of your important data or your entire current system. Either using, optical discs, USB flash drives or external hard drives.
This is too insure protection of your data in case something goes wrong with the install of OS X Mountain Lion.
Good Luck! -
Print to PDF - using Snow Leopard (Saving a PDF file when printing is not supported. Instead, choose
i have a PDF form that i created that is used as a custom proposal that my company sends out to potential clients. the form in its editable state is only used internally. we recently upgraded to snow leopard, but prior to the upgrade, we were able to fill the custom proposal form out using adobe reader, and, as you well know, we weren't able to save that edited document as a PDF with the custom form fields filled out. our work around using adobe reader was to print to a pdf using the adobe pdf printer in the printer dialog. with the addition of snow leopard, however, instead of choosing the adobe pdf printer, we were to choose PDF from the bottom left corner, then Save As PDF, and it would spit out an uneditable pdf that then allowed us to email it to the potential client without them being able to edit it as well as have an internal, digital copy for our records instead of having lots of paper floating around (i know this is also doable using security that disallows the client certain editing privileges, but printing to a pdf is much quicker and more efficient, and the pdf security isn't really that secure at its best).
in any case, i came across this gem of a post here on the support forums that installs another option from the PDF drop down on the bottom left of the print dialog menu that reads Save As Adobe PDF and is supposed to do exactly what i am trying to get it to do...print to a pdf file from adobe reader.
http://kb2.adobe.com/cps/509/cpsid_50981.html
once i updated to acrobat 9.2 (as the link above suggests 9.1), however, the Save As Adobe PDF does appear in the print dialog menu, but it still gives me the same error that acrobat 8 - 9 gave me while using Snow Leopard — Saving a PDF file when printing is not supported. Instead, choose File > Save — and as i've already explained, you can't save an edited pdf form in reader (as i am the only one in the office with acrobat) and still keep the fields as you've entered them in. the only work around is to print to a pdf but is apparently having some recent problems.
using acrobat, however, i know that i can save the editable pdf as a new file with the fields customized as i have left them, but it still saves it as an editable pdf and the print to a pdf option still remains the best option...that way we have digital copies internally that are uneditable that can be printed at any time or emailed to the client.
how can i do print to a pdf, based on what i've written above, using snow leopard and acrobat and reader?A simple way is to flatten the form fields, which converts the field appearances to regular page contents. You can do this with JavaScript or PDF Optimizer (Advanced > PDF Optimizer > Discard Objects > Flatten form fields). A very nice script that adds a custom menu item can be found here: http://www.uvsar.com/projects/acrobat/flattener/
-
Upgraded from tiger to snow leopard, can I go onto lion?
I have recently upgraded from tiger (I think) to snow leopard, can I go onto lion?
I have a imac 17" 2 GHz Intel Core 2 Duo, 1 GB 667 MHz DDR2 SDRAM, I think I bought it in 2007, I don't use it for much but a bit of browsing storing photos and music and maybe a couple of documents.
I have been told by some that if I go to Lion it would be a risk and slow the computer down, so just wondering what you all think.
Thanks in advance,
Rossihttp://www.everymac.com/systems/apple/imac/stats/imac-core-2-duo-2.0-17-inch-spe cs.html
According to unofficial sources, you can upgrade to 4GB RAM. I've done the same in my late 2006 iMac 20" which is offically upgradable to 3GB, but I stuck 2 x 2gb modules in anyway (mainly as I had one spare from my MPB). It's dead easy to do, I'm in the UK and bought Crucial memory which I've always trusted.
I believe the Mac will still only use about 3.3GB of the available 4GB RAM, however some people have reported better performance as both modules are the same size and this helps.
Probably worth getting 2 x 2GB given it's not that expensive. You can always keep your old RAM incase anything goes wrong.
I'd do this regardless of upgrading to Lion or not, the extra RAM will help.
BTW, regardless of a lot of the negativity, I love Lion, it speeded up my other 2007 MBP like it was a new machine. The iMac seems okay, although that is showing a few signs of some graphics glitches, but I don't think this is anything to do with Lion, more about overheating.
Best thing to do, is to clone your existing system (using Disk Utility or SuperDuper or CopyCloner) so that you can boot off that or restore it at anytime without losing anything of your setup.
Then clean install Lion (there are instructions about on how to do this, and create a bootable USB key). You can then migrate back your user settings from your clone to the Lion install. Or just upgrade Snow Leopard. Depends on whether you believe in fresh installing everything.
If you don't like Lion, or it's slow or whatever, you can always restore your snow leopard system from the clone. -
I'm trying to back up 10.6.8 (snow leopard) and all my files before upgrade to Mavericks. I have an old but sturdy external hard drive...how many GB available will I probably need to back up the whole thing? thanks!
You will need a separate partition unless you plan to use the entire drive. You will need an amount of space somewhat larger than the total space now used on your startup drive. If you select the startup drive's Desktop icon, then press COMMAND-I to open the Get Info window. Used space will be shown in the topmost panel. Add a GB or two to that number to determine how much space you'll need for the backup.
Do not backup on a drive that has any files you want to keep. You can make a bootable backup as follows:
Clone using Restore Option of Disk Utility
1. Open Disk Utility in the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive. -
Downloaded Snow Leopard and now mp3 files won't play or open.. help!
Once I updated my system to Snow Leopard, my downloaded mp3 files won't transfer to iTunes or even play in general, they used to automatically download into my iTunes. Is there a specific setting I need to change?
What happens when you try to play in iTunes? Do you get any error messages? Can you play the mp3s in Quicktime or VLC?
If you want iTunes to play your mp3s, the setting for that is inside iTunes Preferences.
Have you tried repairing permissions and restarting your computer? -
How can I access files from a flash drive that were previously saved using a Windows computer? When I attempt to open the file on MacBook Pro, it is asking to "convert file to"; none of the options I choose work. I also have Microsoft Office (with Word) installed on the Mac as well.
Format the external drive as FAT32 or ExFAT. Both computers will then be able to read and write to it.
-
How can I access files that I moved from an older MacBook Pro to a newer one via Firewire and Migration assistant? The files show up on the new MacBook but cannot be opened. Thanks!
Get info then check permissions then add your curent user name (it was probably different on old Mac) and give your username full read/write permissions.
-
have early 2007 MacBookPro, Intel core 2 duo, 2.16 GHz; six mos ago expanded memory to 3GB to upgrade software to Snow Leopard; can I install Mountain Lion on my hardware?
Supported
Models
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer) -
After trying to change permissions on my computer so others on my network can grab files, my external Hard Drive has a lock on it and I can't access files. I've tried repairing permissions, logging in under another Administrator account, using Terminal to fix the problem, downloaded BatChmod but nothing works… Any other suggestions? I have an Imac running OS10.6.8.
There is suddenly a lock icon on my external backup drive!
Custom Permissions -
ipod touch 4g 4.3 not detecting in itunes 10.1.2, i am using mac os x 10.3 snow leopard, can someone help?
You do not need Snow Leopord (10.6.X), but you do need Leopord (10.5.8) and iTunes 10.x for iOS 4.3. You need iTunes 10.5 for iOS 5
For the Current (iOS 5 iPod touch specs)
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.5.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.5 or later (free download from www.itunes.com/download)7 -
I want to upgrade my iMac to Snow Leopard, can I use the (DVD-Mac OS X 10.6.3) that I got with my purchase of the 15" MacBook Pro that totally died, and upgrade the iMac from that DVD that came with the laptop ? Thanks
No, that 10.6.3 DVD is system specific to the MacBook Pro.
You need a Snow Leopard Upgrade > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)
or if a MobileMe users > Apple throws MobileMe users a free version of Snow Leopard -
I want to install an old airport express, the ones which are directly plugged into the socket - but it does not work with Maverick or Snow Leopard - can I configure it with a windows pc?
The Mac running Snow Leopard should be able to configure virtually any version of the AirPort Express.
Tell us what steps that you are taking to configure the Express and what happens after each step.
Maybe you are looking for
-
QTpro no longer working with WMV3 video
Has anything changed with QT that would prevent me from working with video that is WMV3 video and WMA2 stereo? I worked with several files of this format in October of 2008 and saved them to my MacBook only to find today that QTpro (v.7.6) tells me t
-
I can't open some videos--they say I need Flash Player but Adobe says I have successfully installed the latest 64-bit version. It doesn't show in the list of all programs but it is on the "uninstall" list. I have uninstalled the old version Flash Pla
-
Can a trigger change a DROP to DELETE?
My company has software running our equipment that records information to a SQL Server 2005 database. I would like to back up this information via replication. I cannot do this at present because the information tables have no primary key. I canno
-
My firefox opens, but it won't search anything. At all.
Ever since it had asked me to update it, which I did, it hasn't been working. It doesn't search anything. I type things in the search bar, and it won't work. It won't search, the page stays at the home page. Nothing changes. I uninstalled it, adn re
-
Restored my ipod-stuck on wall outlet step
I had to restore my ipod and when it prompted me to plug it into a wall outlet I did not have the adapter so I had to wait until I bought one. Now I have one and I plugged it in but nothing happens. I have tried 2 different USB cables and have tried