MC-q report is not updating the missing Sales Orders, Deliveries andInvoice

Hi Friends,
Before setting the configuration of MC-q report I have created some Sales orders, deliveries and Invoices
But I want to update the missing above documents in MC-q report sales report.
Could you please suggest me how can I update all the missing details in MC-q report report (Sales Orders, Deliveries and Invoices)
Thank you for your support
Best Regards
Amjathpasha

Hello Amjathpasha,
You will need to perform a rebuild of statistics with transactions OLI7, OLI8, OLI9.
I hope this helps.
Best regards,
Ian Kehoe

Similar Messages

Report or table for the changed sales orders

Hi Friends,
Does anyone know of the standard report with which we can track all the sales orders where the changes have been made in particular date range?
If not standard report then atleast the table or the structure where the value is stored.
I know that we can track the orders one by one but I am looking for a list of orders.
Thanks in advance.
Regards
Karan

Hi,
Try CDHDR for header and CDPOS for items.
The only trick here is finding the object.
Reward points if useful
Regards,
Amrish Purohit

Getting missed sales order no. Urgent

Hi,
I have a requirement like: in one internal table has all sale order numbers with some other fields around 10.and the other internal table has some sale order numbers with customer name,address(3 fields). I have to get all the missing sales order numbers into the internal table which has three fields.
Iam trying this with loop at and read but iam not getting all records.
Please help me how to write the code for this.
Thanks in Advance.
Regards,
Sri.

Hi,
Check this code.
Move corresponding itab1 to itab2.
delete adjacent duplicates from itab2 comparing sale_order.
itab2 is the one which has 3 fields.
Reward if helpful.
Regards.

Update LineNum in Sales Order line Details

Dear All,
I have imported a sales order into a database from another database on SAP B1 2005A using DTW. The sales order has only one line item.
However, after importing, the linenum of the target table RDR1 is 0 while the source has it as 1. All the other fields have been updated with the correct data.
I am trying to update the same sales order's LineNum to 1 using DTW with the 'update' option ticked and the process runs successfully. However upon checking the database I find out that it has added another line item with the same details. Can a linenum field be changed/updated? The reason behind my need to change the linenum is because after trying to import a sales delivery linking it to that sales order it gives me an error :[DLN1.BaseEntry][Line: 1] 'No matching records found [ODBC:2028]'.
Kind Regards,
Asif

Asif,
The number of lines in the Sales Order does not neccesarily co-relate to the line number.
Just a simple example:
Create a Sales Order....Add a line item..add Sales Order
Open the same sales order..delete the line item (delete row) and add the same item / another item. Though the Sales Order seems to have only one item..now if you check RDR1 the linenum would be 1.
The architecture of SAP B1 is to generate a new linenum each time you add a row.
Thats probably why you are seeing the difference.
If you want to match the target linenum. simply delete the row and add the same line item and Update SO.
DTW will not update the linenum as it is system managed.
My recommendation for your situation is - if you do not have the same item more than once on a Sales Order - then it is better to get the BaseLine from the Database you imported the Sales Orders to.
Let me know if you need any further direction with this.
Suda

Problem with ios certificate server not updating the CRL

Hi all,
The background is that i'm currently setting up a DMVPN solution with the ipsec tunnels between the spokes created using certificates.
I'm using a cisco 877 as the CA server (its running 12.4(6)T5) to provide the certificates to the spoke routers. This part is working fine - the spokes can request a certificate and get one issue all well and good.
The problem is on the CA, the CRL lifetime is set to 24 hours but the CA is not updating the CRL so when the spokes look for the revocation list (as set in their trustpoint) they are reporting an error that the CRL is out of date and won't connect.
If is do a '#sh crypto pki server' it lists a 'CRL NextUpdate timer. this has a timestamp that is 24 hours after the last certificate was revocked. The only way i can get the CRL to be re-generated is to revoke a certificate.
So, my question is, have i missed something here? I thought the CA would automatically generat a new CRL file every 24hours.
Can anyone help?
thanks.

Hi Mark (?)
this seems to match this bug:
CSCsy95838    IOS CA: CRL not updated, update timer no started
However it does not mention if 12.4(6)T5 is affected, only that it was found in 12.4(15)T3 and resolved in 12.4(15)T10 and other more recent releases.
I would suggest trying the latest 12.4(15)Tx, 15.0(1)Mx or 15.1(4)Mx release if you can.
I supposed you've though of it, but just in case: as a workaround you can disable the CRL check on all the DMVPN routers, obviously they will still allow connections from routers with a revoked spoke.
As a (temporary?) replacement for a CRL, you could use a "certificate ACL" with which you can kind of create a "manual local CRL" :
crypto pki certificate map certACL 10
   serial-number ne
   serial-number ne
   etc.
crypto pki trustpoint myTP
   match certificate certACL
(note the "ne" stands for "not equal" so you are permitting any certificate whose serial number is not listed)
Obviously you would have to configure (and maintain!) this on each router participating in the DMVPN so this is cumbersome, but I suppose if you don't often revoke certs it might be an option.
hth
Herbert
If this post answers your question, please click the "Correct Answer" button

The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

Batch Split in OBD & billed for the entire Quantity .RG1 register does not update the excise values

Hi All,
I am new here . We have batch split in Delivery and 601 happens for the individual batches and billing we bill for the entire quantity . Hence the RG1 does not update the excise values for the batches and it is showing as zero (upon extraction in J2I6). Upon research through the program the latest note which i presume is patched
The latest note is N158234 which does not show in the program but seems have been patched considering we are using the Latest version of SAP .
As you see above in the billing we have billed for the whole quantity but RG1 does not update for the since the batches are zero .
My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split .
Now i have checked few other projects in my company and they all seems to be following the program . So i am wondering whether my process or some customization is missing .
Sales order (no batch determination) , in delivery the batches are picked through wm to and batch split happens in the delivery . Then billling for the whole quantity . We have automatic excise invoice creation enabled so no J1IIN .
Can somebody help me .
Thank you

My programmer says because of some note related to cancellation where it says about values H & J in vbfa table and due to which program does not go through the Note for the batch split
Which field (H & J) they were referring in VBFA ?
i have checked few other projects in my company and they all seems to be following the program
How about the other projects' values in VBFA where your techinical team is guessing some issue. Have you compared this?
Since you have already the note 158234 implemented in your system, ideally, you should not face any issue.
G. Lakshmipathi

MR 11 not updating the invoicing for services

Hi All,
I have a scenario where the client uses MR11 for clearing the invoices.
He does not use MIRO for invoicing.
During our observation it is found that using MR11 does not update the invoices for services but the invoices for the material received is updated while checking the reports like ME2N.
I have checked the Service based IV and the GR based IV in the invoice tab of PO.
Can you please advice me as to why this is happening only in case of services.
Thanks and Regards
Sridhar.

Hi Charlie,
Thank you very much for the response.
Actually I am looking for the IR reduction and not the GR reduction.
The note you have mentioned applies for GR reduction.
Also we are in the ECC 6 environment.
Please update me with further information.
Regards
Sridhar

How to update report when i update the table.......

Hi, iam very new to this group, presently iam using XML Publisher, in that i have some doubts, that is, i created one report, immediatly i update the oracle table then how to update the report in XML Publisher,how to do that one pls tell me its use full for me please,
another one how do we publish this Reports.
please tell me any body,
Thank you.
Ramana.

XML-Publisher can be called using an URL. This is described in the userguide.
What you could to is to create a db trigger on your table which will make a url call like you would do calling the Oracle reports server from the database using the event driven API.
Note that in order to have this work you will need to place the report you want to run in the guests folder of XML-Publisher

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

Not Updating the Values in the JComboBox and JTable

Hi Friends
In my program i hava Two JComboBox and One JTable. I Update the ComboBox with different field on A Table. and then Display a list of record in the JTable.
It is Displaying the Values in the Begining But when i try to Select the Next Item in the ComboBox it is not Updating the Records Eeither to JComboBox or JTable.
MY CODE is this
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.DefaultComboBoxModel.*;
import javax.swing.table.*;
import java.sql.*;
import java.util.*;
public class SearchBook extends JDialog implements ActionListener
     private JComboBox comboCategory,comboAuthor;
     private JSplitPane splitpane;
     private JTable table;
     private JToolBar toolBar;
     private JButton btnclose, btncancel;
     private JPanel panel1,panel2,panel3,panel4;
     private JLabel lblCategory,lblAuthor;
     private Container c;
     //DefaultTableModel model;
     Statement st;
     ResultSet rs;
     Vector v = new Vector();
     public SearchBook (Connection con)
          // Property for JDialog
          setTitle("Search Books");
          setLocation(40,110);
          setModal(true);
          setSize(750,450);
          // Creating ToolBar Button
          btnclose = new JButton(new ImageIcon("Images/export.gif"));
          btnclose.addActionListener(this);
          // Creating Tool Bar
          toolBar = new JToolBar();
          toolBar.add(btnclose);
          try
               st=con.createStatement();
               rs =st.executeQuery("SELECT BCat from Books Group By Books.BCat");
               while(rs.next())
                    v.add(rs.getString(1));
          catch(SQLException ex)
               System.out.println("Error");
          panel1= new JPanel();
          panel1.setLayout(new GridBagLayout());
          GridBagConstraints c = new GridBagConstraints();
          c.fill = GridBagConstraints.HORIZONTAL;
          lblCategory = new JLabel("Category:");
          lblCategory.setHorizontalAlignment (JTextField.CENTER);
          c.gridx=2;
          c.gridy=2;
          panel1.add(lblCategory,c);
          comboCategory = new JComboBox(v);
          comboCategory.addActionListener(this);
          c.ipadx=20;
          c.gridx=3;
          c.gridwidth=1;
          c.gridy=2;
          panel1.add(comboCategory,c);
          lblAuthor = new JLabel("Author/Publisher:");
          c.gridwidth=2;
          c.gridx=1;
          c.gridy=4;
          panel1.add(lblAuthor,c);
          lblAuthor.setHorizontalAlignment (JTextField.LEFT);
          comboAuthor = new JComboBox();
          comboAuthor.addActionListener(this);
          c.insets= new Insets(20,0,0,0);
          c.ipadx=20;
          c.gridx=3;
          c.gridy=4;
          panel1.add(comboAuthor,c);
          comboAuthor.setBounds (125, 165, 175, 25);
          table = new JTable();
          JScrollPane scrollpane = new JScrollPane(table);
          //panel2 = new JPanel();
          //panel2.add(scrollpane);
          splitpane = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT,panel1,scrollpane);
          splitpane.setDividerSize(15);
          splitpane.setDividerLocation(190);
          getContentPane().add(toolBar,BorderLayout.NORTH);
          getContentPane().add(splitpane);
     public void actionPerformed(ActionEvent ae)
          Object obj= ae.getSource();
          if(obj==comboCategory)
               String selecteditem = (String)comboCategory.getSelectedItem();
               displayAuthor(selecteditem);
               System.out.println("Selected Item"+selecteditem);
          else if(obj==btnclose)
               setDefaultCloseOperation(JDialog.DISPOSE_ON_CLOSE);
          else if(obj==comboAuthor)
               String selecteditem1 = (String)comboAuthor.getSelectedItem();
               displayavailablity(selecteditem1);
               //System.out.println("Selected Item"+selecteditem1);
               System.out.println("Selected Author"+selecteditem1);
     private void displayAuthor(String selecteditem)
          try
          {     Vector data = new Vector();
               rs= st.executeQuery("SELECT BAuthorandPublisher FROM Books where BCat='" + selecteditem + "' Group By Books.BAuthorandPublisher");
               System.out.println("Executing");
               while(rs.next())
                    data.add(rs.getString(1));
               //((DefaultComboBoxModel)comboAuthor.getModel()).setVectorData(data);
               comboAuthor.setModel(new DefaultComboBoxModel(data));
          catch(SQLException ex)
               System.out.println("ERROR");
     private void displayavailablity(String selecteditem1)
               try
                    Vector columnNames = new Vector();
                    Vector data1 = new Vector();
                    rs= st.executeQuery("SELECT * FROM Books where BAuthorandPublisher='" + selecteditem1 +"'");
                    ResultSetMetaData md= rs.getMetaData();
                    int columns =md.getColumnCount();
                    String booktblheading[]={"Book ID","Book NAME","BOOK AUTHOR/PUBLISHER","REFRENCE","CATEGORY"};
                    for(int i=1; i<= booktblheading.length;i++)
                         columnNames.addElement(booktblheading[i-1]);
                    while(rs.next())
                         Vector row = new Vector(columns);
                         for(int i=1;i<=columns;i++)
                              row.addElement(rs.getObject(i));
                         data1.addElement(row);
                         //System.out.println("data is:"+data);
                    ((DefaultTableModel)table.getModel()).setDataVector(data1,columnNames);
                    //DefaultTableModel model = new DefaultTableModel(data1,columnNames);
                    //table.setModel(model);
                    rs.close();
                    st.close();
               catch(SQLException ex)
}Please check my code and give me some Better Solution
Thank you

You already have a posting on this topic:
http://forum.java.sun.com/thread.jspa?threadID=5143235

Work order should not update the fields in PR

Hi Gurus
My requirements is that workorder should not updates the purchasing data fields in PR do not go to the shoping cart. How can make it possible.
Thanks in Advance

Hi,
I am not sure of your requirement clearly but check up the below user exits :-
COZF0001 Change purchase req. for externally processed operation
COZF0002 Change purchase req. for externally procured component
or BADI :- IWO1_PREQ_BADI BAdI for Manipulation of P.Reqs from Orders + Networks ,SE18
regrds
pushpa

Login settings will not update the local testing server files

When uploading to web server from local testing server, changing login settings in the control panel does not update the local testing server Restrict Access to page files. Causing login on website not to function.
It does however update the Connections file and the login wizard form.
What is the best way to change login settings before uploading site to web server?
Thanks
Dan

Dan - I am having the same exact problem. I'm using the restrict access and user registration and login - when attempting to use the Update Record wizard to allow users to change their password or email address, it doesn't change the record.

DYNP_VALUES_UPDATE not Updating the Field on my Dynpro

Hi.
I want to create a dynpro where two fields are. Field 1 allows the user to enter a customer number, field two shall come up with a number that is calculated somehow. The calculation can last up to 20 seconds, so I dont want to make the user waite for this number.. .he shall be able to work with the rest of the dynpro.
Therefore I called the function that does the calcuiation like that:
MODULE user_command_0100 INPUT.
DATA: lv_guid_16 TYPE guid_16.
IF kna1-kunnr IS NOT INITIAL AND kna1-kunnr <> gv_kunnr
    CALL FUNCTION 'GUID_CREATE'
      IMPORTING
        ev_guid_16 = lv_guid_16.
    gv_taskid = lv_guid_16+8(8).
    CALL FUNCTION 'YDETERMINE_DEPOTDISTANCE'
      STARTING NEW TASK gv_taskid
      PERFORMING receive_depent ON END OF TASK
      EXPORTING
        i_kunnr = kna1-kunnr.
ENDIF.
ENDMODULE.
The next piece of code shall get the returning value if the function wants to return its results.
FORM receive_depent USING i_task TYPE clike.
TABLES: d020s.
DATA: dyname LIKE d020s-prog,
        dynumb LIKE d020s-dnum.
DATA: BEGIN OF dynpfields OCCURS 1.
          INCLUDE STRUCTURE dynpread.
DATA: END OF dynpfields.
IF i_task = gv_taskid.
    RECEIVE RESULTS FROM FUNCTION 'YDETERMINE_DEPOTDISTANCE'
    IMPORTING
      e_depent         = kna1-yydepent
      e_accuracy       = gv_accuracy.
    MOVE 'KNA1-YYDEPENT' TO dynpfields-fieldname.
    MOVE kna1-yydepent TO dynpfields-fieldvalue.
    APPEND dynpfields.
    dyname = sy-cprog.
    dynumb = '0100'.
    CALL FUNCTION 'DYNP_VALUES_UPDATE'
      EXPORTING
        dyname               = dyname
        dynumb               = dynumb
      TABLES
        dynpfields           = dynpfields
      EXCEPTIONS
        invalid_abapworkarea = 01
        invalid_dynprofield = 02
        invalid_dynproname   = 03
        invalid_dynpronummer = 04
        invalid_request      = 05
        no_fielddescription = 06
        undefind_error       = 07.
    ASSERT sy-subrc = 0.
ENDIF.
Problem is: The DYNP_VALUES_UPDATE does not update the field on my dynpro at all. If I hit enter another time, then the field is provided by the value as another PBO will be processed. What is my mistake here?
Regards
Manfred
Edited by: Rob Burbank on Oct 29, 2010 12:07 PM

Hi Manfred,
Replace all the DYNP_VALUES_UPDATE-related content by the following statement:
SET USER-COMMAND 'xxx'.
While DYNP_VALUES_UPDATE does update the fields, a roundtrip is not triggered so the content of the fields will not be refreshed. The SET USER-COMMAND does that.
Hope this helps you!
Cheers, Roel

Report is not fetching the data from Aggregate..

Hi All,
I am facing the problem in aggregates..
For example when i am running the report using Tcode RSRT2, the BW report is not fetching the data from Aggregates.. instead going into the aggregate it is scanning whole cube Data....
FYI.. Checked the characteristcis is exactely matching with aggregates..
and also it is giving the message as:
<b>Characteristic 0G_CWWPTY is compressed but is not in the aggregate/query</b>
Can some body explain me about this error message.. pls let me know solution asap..
Thankyou in advance.
With regards,
Hari

Hi
Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
GTR

MC-q report is not updating the missing Sales Orders, Deliveries andInvoice

Similar Messages

Maybe you are looking for