Md5summing the database ends up in integrity failure

What might cause this? I clean out the cache before i did this, I don't know if it has anything to do with it.
# pacman-optimize
:: Md5sum'ing the old database                                           [DONE]
:: Tar'ing up /var/lib/pacman                                            [DONE]
:: Making and md5sum'ing the new db                                      [DONE]
:: Checking integrity                                                    [FAIL]
:: ERROR: integrity check FAILED, reverting to old database
Last edited by theringmaster (2007-11-09 02:17:35)

This is probably due to not having the diff program installed (pacman -S diffutils for it). There's a few tickets for it in the bug tracker, and it will be fixed when pacman 3.1 is released.

Similar Messages

  • What  is self referential integrity? How does it effect the Database?

    Hello Gurus,
    What is self referential integrity?
    How could it is achieved and implemented?
    and what is effect on the Database?
    Thanks in advance.
    ~ SubbaReddy .M

    Self referential integrity simple means that the parent end of a foreign key constraint is in the same table as the child end. Consider the SCOTT.EMP table. Every manager is also an employee. Hence there is a foreign key between the MGR column and the EMPNO column.
    rgds, APC

  • Failure to retrieve data from the database (Vendor Code 6550)

    I am having a trouble with two of the 6 reports that I have created. I am using Crystal XI and Oracle 10g. The underlying database object is a stored procedure that accepts as input a start time as a TIMESTAMP, an end time as a TIMESTAMP and a furnace number as a number. I have a cursor ref as a return parameter.
    When I run the stored procedure in Oracle I get the selected records and can view them on the screen.
    When I refresh data on the report in Crystal XI developer, the designer asks me for the start and end time and furnace number. When I input these values the report displays properly.
    When I launch the report from my VB .NET 2005 application I am asked for the username and the password for the database (this is another problem I need to solve as this information I put into the program seems to be ignored in my program) then I receive the following failure message:
    Failure to retrieve data from the database (Vendor Code 6550)
    When I launch the other reports, they only ask me for the username and password then they display the proper data.
    The main difference between my other reports and the two that are returning the above failure code is that the other reports are to either tables or views. The two that don't work are tied to stored procedures. I there any way that I can solve this problem or at least get more information?
    Any help would be greatly appreciated. Let me know if you need any other information.

    I have a similar problem, the only difference is that the crystal report error is only thrown when I try to load the sub reports at my web application. When I deploy my report to the Web application the main report loads up fine but when I try to launch the sub reports from the main report it can no longer load.
    But when I use the Crystal report developer I am able to load the main report and it's associated sub reports without any issues.
    My issue only occurs when I try to load the sub report in the web application. The following sections shows how my reports look like both in my .NET web application and also at the Crystal Report Development IDE.
    Failure: Loading my Reports from .NET Web Application
    1) When I load from the web application I am able to load the main report as per the print screen below.
    2) When I try to click on the hyper links to enter the sub reports I am now able to load them, both sub reports cannot load and will throw the same error "
    Failed to retrieve data from the database. Details: [Database Vendor Code:
    6550 ] Failed to retrieve data from the database. Details: [Database Vendor
    Code: 6550 ] Failed to retrieve data from the database. Error in File OAWR3011A
    {CEC8A94A-4490-4640-95FB-2739A679978B}.rpt: Failed to retrieve data from the
    database. Details: [Database Vendor Code: 6550 ] "
    Success: Loading my Reports from Crystal Report Development Tool
    1) This is my Main Report Loaded from the Crystal Report Development Tool, the first two hyperlinked fields are links to my sub reports, step number 2 and number 3 shows my sub reports when I load it using Crystal Report Developer
    2) Sub Report 1 Loaded Successfully, when I click on the fields in the first link
    3) Sub Report 2 loaded successfully when I click the second field hyper link

  • To avoid writing database code in the front end

    Hello,
    I am working on a database application using 10g database as backend and dotnet as front end. I wish to execute only oracle stored procedure for all the select (to avoid hard parse and use of bind variable), DDL and DML operations; just to avoid writing database code in the front end. Can anyone please give me a little examples of :
    1.Select query's output to be return as resultset by stored procedure.
    2.DML example by stored procedure.
    3.Any DDL example by stored procedure.
    using scott.emp, so that i would just call the stored procedure, rather than giving select,DML and/or DDL commands in the front end. Even though i have read in the documentation, but a clear cut examples will help me to get into clear concept as well.
    Thanks & Regards
    Girish Sharma

    Hi...
    -->Select example
    create or replace procedure get_emp(rc out sys_refcursor)
    is
    begin
    open rc for select * from emp;
    end;
    -->DML example
    create or replace procedure do_dml_emp(pempid in number,
    pempname varchar2,
    result out number)
    is
    begin
    insert into emp(empid,empname) values(pempid,pempname) returning empid into result;
    exception
    when others then
    result:=-1;
    end;
    -->DDL example
    create or replace procedure ddl_emp(colname varchar2,
    coltype varchar2,
    result out number)
    is
    begin
    result:=-1;
    execute immediate 'alter table emp add column ' || colname || ' ' || coltype ;
    result:=1;
    end;

  • Can't install Oracle XE on Windows 7 : the install ends fine but no database created and error in log file

    When i try to install Oracle XE 64bit 11g on a windows 7, the installation ends correctly, but no database is created (no datafiles) and in the log file I find :
    Oracle Database 11g Clusterware Release 11.2.0.2.0 - Production Copyright 1996, 2010 Oracle. All rights reserved.
    2015-03-24 15:24:14.733: [ default][3316]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\olr cannot be opened. error 2
    [ CLSE][3316]clse_get_crs_home: Error retrieving OLR configuration [0] [Error opening olr registry key. Le fichier spécifié est introuvable.
    What's the problem?

    Oracle XE 64bit 11g on a windows 7
    Which edition ?

  • How to place an image in database and how to retrieve and display it in the front end

    how to place an image in database and how to retrieve and display it in the front end
    and to place an image in database and retrieve the image from database using xml
    please,help me out.

    Create a table with a Long RAW Datatype column for storing the Image Column Data.
    Create the form based on the table , which by defaults the column with LONG RAW atatype to a Image Item.
    You can use Forms Built in function READ_IMAGE_FILE to read a Image file stored on the file system in to the image item.
    A save on the form saves the image in the Image item in the long raw column.

  • Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 5

     
    Hi All,
    I'm still struggling with the same cube and this is my 3rd post and once i fix some thing the other breaks. Please forgive me. When i process my cube i'm getting the error:
    Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 5.
    My question is when the error says column 5 (is it the column 5 in the DSV?) or is it the column 5 in the DIMENSION list?
    My next question is the DSV Query works perfectly fine , so why this error in cube? This is what i have in the query in DSV.
    Please need help. In the below query both the column 5 (ArEASSIGNED TO VENDOR) in the CUBE and underlying table have the same data type and length VARCHAR(4000). Why is the process failing still?
    SELECT [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_0],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingsector]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_1],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseclosedflag]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_2],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casehasvendorinfo]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_3],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingstatus]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_4],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_5],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassignedtovendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_6],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentvendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_7],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoiced]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSInvoiced0_8],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatus]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_9],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casecloseddateid]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_10],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendordateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_11],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassigneddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_12],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentassigneddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_13],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingduedateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_14],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendormoweddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_15],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[captypename] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_16],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetype] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseType0_17],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumbersubgroup] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_18],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetownship] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_19],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casestatus] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseStatus0_20],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseopendateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_21],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casereferredtolegalflag]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_22],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casemacinitiatedflag] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_23],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseconversionstatusdesc]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_24],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reasonforinvestigation] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_25],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[investigationopendateid]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_26],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[receiveddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_27],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assigned_department_staff]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_28],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseinitiator] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_29],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendorinvoiceamount] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_30],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[inspection_result] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_31],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reason_for_complaint] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_32],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendor_action] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_33],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[complaint_source] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_34],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[contractcompliancevendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_35],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatusdateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_36],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_complaint_id] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_37],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_inspection_id] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_38],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumber] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseNumber0_39],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[parcelnumber] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_40],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[row_index] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSROW_INDEX0_41]
    FROM (SELECT CASE Isnumeric(
    accela_staging.dbo.fact_highweedsandgrassdetails.vendorinvoiceamount)
    WHEN 1 THEN Cast(
    fact_highweedsandgrassdetails.vendorinvoiceamount AS
    VARCHAR(
    10))
    END AS
    Total_Dollar_Amount,
    fact_highweedsandgrassdetails.casenumber,
    fact_highweedsandgrassdetails.row_index,
    fact_highweedsandgrassdetails.mowingsector,
    fact_highweedsandgrassdetails.caseclosedflag,
    fact_highweedsandgrassdetails.casecloseddateid,
    fact_highweedsandgrassdetails.maccomments,
    fact_highweedsandgrassdetails.lastfeeinvoicedateid,
    fact_highweedsandgrassdetails.casehasvendorinfo,
    fact_highweedsandgrassdetails.mowingstatus,
    fact_highweedsandgrassdetails.receiveddateid,
    fact_highweedsandgrassdetails.assignedtovendordateid,
    fact_highweedsandgrassdetails.assignedtovendor,
    fact_highweedsandgrassdetails.reassigneddateid,
    fact_highweedsandgrassdetails.reassignedtovendor,
    fact_highweedsandgrassdetails.currentvendor,
    fact_highweedsandgrassdetails.currentassigneddateid,
    fact_highweedsandgrassdetails.mowingduedateid,
    fact_highweedsandgrassdetails.vendormoweddateid,
    fact_highweedsandgrassdetails.invoiced,
    fact_highweedsandgrassdetails.invoicedstatus,
    fact_highweedsandgrassdetails.invoicedstatusdateid,
    fact_highweedsandgrassdetails.vendorinvoicenumber,
    fact_highweedsandgrassdetails.vendorcomments,
    fact_casedetails.captypename,
    fact_casedetails.casenumbersubgroup,
    fact_casedetails.casetype,
    fact_casedetails.township AS
    CaseTownship,
    fact_casedetails.casestatus,
    fact_casedetails.caseopendateid,
    fact_casedetails.referredtolegalflag AS
    CaseReferredToLegalFlag,
    fact_casedetails.macinitiatedflag AS
    CaseMACInitiatedFlag,
    fact_casedetails.conversionstatusdesc AS
    CaseConversionStatusDesc,
    fact_casedetails.assignedstaff AS
    CaseAssignedStaff,
    fact_casedetails.completedstaff AS
    CaseCompletedStaff,
    fact_casedetails.closedbystaff AS
    CaseClosedByStaff,
    fact_casedetails.initiator AS
    CaseInitiator,
    fact_casedetails.reasonforinvestigation,
    fact_casedetails.primaryaddress,
    fact_casedetails.parcelnumber,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE (fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.recordimportdatetime)) AS
    DECIMAL(6, 2))
    AS
    DaysOpen,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE
    (fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime)) AS
    NUMERIC(9, 2))
    * 24 AS
    HoursOpenToMow,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.assignedtovendordate,
    COALESCE
    (fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime)) AS
    NUMERIC(9, 2))
    * 24 AS
    HoursAssignedToMow,
    CASE
    WHEN mowingstatus = 'Mowed'
    OR mowingstatus = 'Closed' THEN 1
    ELSE 0
    END AS
    NumberComplete,
    fact_highweedsandgrassdetails.recordimportdatetime,
    fact_casedetails.macsiebelnumber,
    fact_highweedsandgrassdetails.mowingduedate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.lastfeeinvoicedate,
    fact_highweedsandgrassdetails.investigationopendatetime,
    fact_highweedsandgrassdetails.investigationopendate,
    fact_highweedsandgrassdetails.investigationopendateid,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    ( vendormoweddatetime IS NOT NULL
    AND vendormoweddatetime <=
    fact_highweedsandgrassdetails.casecloseddate ) THEN
    fact_highweedsandgrassdetails.vendormoweddatetime
    ELSE
    CASE
    WHEN (
    fact_highweedsandgrassdetails.casecloseddate IS
    NOT NULL
    AND fact_highweedsandgrassdetails.casecloseddate
    <=
    fact_highweedsandgrassdetails.recordimportdatetime )
    THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(9, 2)) * 24 AS
    AbatementDurationHoursOLD,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate) IS
    NOT NULL THEN COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate)
    ELSE
    CASE
    WHEN ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
    AND fact_highweedsandgrassdetails.casecloseddate <=
    fact_highweedsandgrassdetails.recordimportdatetime ) THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(9, 2)) * 24 AS
    AbatementDurationHours,
    fact_casedetails.assigneddepartment,
    COALESCE (fact_casedetails.assignedstaff, '[null]')
    + '/'
    + COALESCE (fact_casedetails.assigneddepartment, '[null]') AS
    Assigned_Department_Staff,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.receiveddatetime,
    fact_highweedsandgrassdetails.assignedtovendordate,
    fact_highweedsandgrassdetails.vendorinvoiceamount,
    fact_highweedsandgrassdetails.invoicedstatusdate,
    fact_highweedsandgrassdetails.complaint_source,
    fact_highweedsandgrassdetails.inspection_result,
    fact_highweedsandgrassdetails.reason_for_complaint,
    fact_highweedsandgrassdetails.contractcompliancevendor,
    fact_highweedsandgrassdetails.vendor_action,
    fact_highweedsandgrassdetails.date_of_complaint_id,
    fact_highweedsandgrassdetails.date_of_inspection_id,
    CONVERT(INT, Replace(Replace(fact_highweedsandgrassdetails.casenumber,
    'HWG', 0)
    , '-', 0)) AS compliancejoin,
    fact_highweedsandgrassdetails.maccomments AS Expr1,
    dbo.dim_highweedscensustracts.b1_census_tract
    FROM dbo.fact_highweedsandgrassdetails
    INNER JOIN dbo.fact_casedetails
    ON fact_highweedsandgrassdetails.casenumber =
    fact_casedetails.casenumber
    INNER JOIN dbo.dim_highweedscensustracts
    ON fact_highweedsandgrassdetails.casenumber =
    dbo.dim_highweedscensustracts.casenumber
    GROUP BY fact_highweedsandgrassdetails.casenumber,
    fact_highweedsandgrassdetails.row_index,
    fact_highweedsandgrassdetails.mowingsector,
    fact_highweedsandgrassdetails.caseclosedflag,
    fact_highweedsandgrassdetails.casecloseddateid,
    fact_highweedsandgrassdetails.maccomments,
    fact_highweedsandgrassdetails.lastfeeinvoicedateid,
    fact_highweedsandgrassdetails.casehasvendorinfo,
    fact_highweedsandgrassdetails.mowingstatus,
    fact_highweedsandgrassdetails.receiveddateid,
    fact_highweedsandgrassdetails.assignedtovendordateid,
    fact_highweedsandgrassdetails.assignedtovendor,
    fact_highweedsandgrassdetails.reassigneddateid,
    fact_highweedsandgrassdetails.reassignedtovendor,
    fact_highweedsandgrassdetails.currentvendor,
    fact_highweedsandgrassdetails.currentassigneddateid,
    fact_highweedsandgrassdetails.mowingduedateid,
    fact_highweedsandgrassdetails.vendormoweddateid,
    fact_highweedsandgrassdetails.invoiced,
    fact_highweedsandgrassdetails.invoicedstatus,
    fact_highweedsandgrassdetails.invoicedstatusdateid,
    fact_highweedsandgrassdetails.vendorinvoicenumber,
    fact_highweedsandgrassdetails.vendorcomments,
    fact_casedetails.captypename,
    fact_casedetails.casenumbersubgroup,
    fact_casedetails.casetype,
    fact_casedetails.township,
    fact_casedetails.casestatus,
    fact_casedetails.caseopendateid,
    fact_casedetails.referredtolegalflag,
    fact_casedetails.macinitiatedflag,
    fact_casedetails.conversionstatusdesc,
    fact_casedetails.assignedstaff,
    fact_casedetails.completedstaff,
    fact_casedetails.closedbystaff,
    fact_casedetails.initiator,
    fact_casedetails.reasonforinvestigation,
    fact_casedetails.primaryaddress,
    fact_casedetails.parcelnumber,
    fact_highweedsandgrassdetails.vendormoweddatetime,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE (
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.recordimportdatetime))
    AS
    NUMERIC(9, 2)),
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE (
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime))
    AS
    NUMERIC(9, 2)),
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.assignedtovendordate,
    COALESCE (
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime))
    AS
    NUMERIC(9, 2)),
    CASE
    WHEN mowingstatus = 'Mowed'
    OR mowingstatus = 'Closed' THEN 1
    ELSE 0
    END,
    fact_highweedsandgrassdetails.recordimportdatetime,
    fact_casedetails.macsiebelnumber,
    fact_highweedsandgrassdetails.mowingduedate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.lastfeeinvoicedate,
    fact_highweedsandgrassdetails.investigationopendatetime,
    fact_highweedsandgrassdetails.investigationopendate,
    fact_highweedsandgrassdetails.investigationopendateid,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    ( vendormoweddatetime IS NOT NULL
    AND vendormoweddatetime <=
    fact_highweedsandgrassdetails.casecloseddate ) THEN
    fact_highweedsandgrassdetails.vendormoweddatetime
    ELSE
    CASE
    WHEN (
    fact_highweedsandgrassdetails.casecloseddate
    IS NOT NULL
    AND
    fact_highweedsandgrassdetails.casecloseddate <=
    fact_highweedsandgrassdetails.recordimportdatetime )
    THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE
    fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(9, 2)),
    Cast(Datediff(ss,
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate) IS
    NOT NULL THEN COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate)
    ELSE
    CASE
    WHEN
    ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
    AND fact_highweedsandgrassdetails.casecloseddate <=
    fact_highweedsandgrassdetails.recordimportdatetime ) THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(18, 2)) * 60,
    fact_casedetails.assigneddepartment,
    COALESCE (fact_casedetails.assignedstaff, '[null]')
    + '/'
    + COALESCE (fact_casedetails.assigneddepartment, '[null]'),
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.receiveddatetime,
    fact_highweedsandgrassdetails.assignedtovendordate,
    fact_highweedsandgrassdetails.vendorinvoiceamount,
    fact_highweedsandgrassdetails.invoicedstatusdate,
    fact_highweedsandgrassdetails.complaint_source,
    fact_highweedsandgrassdetails.inspection_result,
    fact_highweedsandgrassdetails.reason_for_complaint,
    fact_highweedsandgrassdetails.contractcompliancevendor,
    fact_highweedsandgrassdetails.vendor_action,
    fact_highweedsandgrassdetails.date_of_complaint_id,
    fact_highweedsandgrassdetails.date_of_inspection_id,
    CONVERT(INT, Replace(
    Replace(fact_highweedsandgrassdetails.casenumber, 'HWG', 0)
    , '-', 0)),
    fact_highweedsandgrassdetails.maccomments,
    dbo.dim_highweedscensustracts.b1_census_tract) AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS]
    ORDER BY [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
    ASC
    SV

    I just counted the columns from the top:
    1) compliancejoin, 2) mowingsector, 3) caseclosedflag, 4) casehasvendorinfo, 5) mowingstatus, 6) assignedtovendor.
    I see now that your subject line talks about column 6, but you say column 5 in body of your original post.
    I don't know anything about cubes, but apparently there is some mapping problem when you run it from SSAS. (I assume it is SSAS, a part of the product I'm entirely ignorant of.) I figured that if you had got tripped by the zero-based numbering, you
    might be staring on the wrong column.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 6.

    Hi All,
    I'm still struggling with the same cube and this is my 3rd post and once i fix some thing the other breaks. Please forgive me. When i process my cube i'm getting the error:
    Errors in the back-end database access module. OLE DB was unable to convert a value to the data type requested for column 5.
    My question is when the error says column 5 (is it the column 5 in the DSV?) or is it the column 5 in the DIMENSION list?
    My next question is the DSV Query works perfectly fine , so why this error in cube? This is what i have in the query in DSV.
    Please need help. In the below query both the column 5 (ArEASSIGNED TO VENDOR) in the CUBE and underlying table have the same data type and length VARCHAR(4000). Why is the process failing still?
    SELECT [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_0],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingsector]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_1],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseclosedflag]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_2],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casehasvendorinfo]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_3],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingstatus]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_4],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_5],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassignedtovendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_6],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentvendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_7],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoiced]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSInvoiced0_8],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatus]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_9],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casecloseddateid]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_10],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assignedtovendordateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_11],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reassigneddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_12],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[currentassigneddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_13],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[mowingduedateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_14],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendormoweddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_15],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[captypename] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_16],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetype] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseType0_17],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumbersubgroup] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_18],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casetownship] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_19],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casestatus] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseStatus0_20],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseopendateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_21],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casereferredtolegalflag]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_22],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casemacinitiatedflag] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_23],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseconversionstatusdesc]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_24],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reasonforinvestigation] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_25],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[investigationopendateid]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_26],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[receiveddateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_27],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[assigned_department_staff]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_28],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[caseinitiator] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_29],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendorinvoiceamount] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_30],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[inspection_result] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_31],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[reason_for_complaint] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_32],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[vendor_action] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_33],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[complaint_source] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_34],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[contractcompliancevendor]
    AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_35],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[invoicedstatusdateid] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_36],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_complaint_id] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_37],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[date_of_inspection_id] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_38],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[casenumber] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSCaseNumber0_39],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[parcelnumber] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS0_40],
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[row_index] AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTSROW_INDEX0_41]
    FROM (SELECT CASE Isnumeric(
    accela_staging.dbo.fact_highweedsandgrassdetails.vendorinvoiceamount)
    WHEN 1 THEN Cast(
    fact_highweedsandgrassdetails.vendorinvoiceamount AS
    VARCHAR(
    10))
    END AS
    Total_Dollar_Amount,
    fact_highweedsandgrassdetails.casenumber,
    fact_highweedsandgrassdetails.row_index,
    fact_highweedsandgrassdetails.mowingsector,
    fact_highweedsandgrassdetails.caseclosedflag,
    fact_highweedsandgrassdetails.casecloseddateid,
    fact_highweedsandgrassdetails.maccomments,
    fact_highweedsandgrassdetails.lastfeeinvoicedateid,
    fact_highweedsandgrassdetails.casehasvendorinfo,
    fact_highweedsandgrassdetails.mowingstatus,
    fact_highweedsandgrassdetails.receiveddateid,
    fact_highweedsandgrassdetails.assignedtovendordateid,
    fact_highweedsandgrassdetails.assignedtovendor,
    fact_highweedsandgrassdetails.reassigneddateid,
    fact_highweedsandgrassdetails.reassignedtovendor,
    fact_highweedsandgrassdetails.currentvendor,
    fact_highweedsandgrassdetails.currentassigneddateid,
    fact_highweedsandgrassdetails.mowingduedateid,
    fact_highweedsandgrassdetails.vendormoweddateid,
    fact_highweedsandgrassdetails.invoiced,
    fact_highweedsandgrassdetails.invoicedstatus,
    fact_highweedsandgrassdetails.invoicedstatusdateid,
    fact_highweedsandgrassdetails.vendorinvoicenumber,
    fact_highweedsandgrassdetails.vendorcomments,
    fact_casedetails.captypename,
    fact_casedetails.casenumbersubgroup,
    fact_casedetails.casetype,
    fact_casedetails.township AS
    CaseTownship,
    fact_casedetails.casestatus,
    fact_casedetails.caseopendateid,
    fact_casedetails.referredtolegalflag AS
    CaseReferredToLegalFlag,
    fact_casedetails.macinitiatedflag AS
    CaseMACInitiatedFlag,
    fact_casedetails.conversionstatusdesc AS
    CaseConversionStatusDesc,
    fact_casedetails.assignedstaff AS
    CaseAssignedStaff,
    fact_casedetails.completedstaff AS
    CaseCompletedStaff,
    fact_casedetails.closedbystaff AS
    CaseClosedByStaff,
    fact_casedetails.initiator AS
    CaseInitiator,
    fact_casedetails.reasonforinvestigation,
    fact_casedetails.primaryaddress,
    fact_casedetails.parcelnumber,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE (fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.recordimportdatetime)) AS
    DECIMAL(6, 2))
    AS
    DaysOpen,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE
    (fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime)) AS
    NUMERIC(9, 2))
    * 24 AS
    HoursOpenToMow,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.assignedtovendordate,
    COALESCE
    (fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime)) AS
    NUMERIC(9, 2))
    * 24 AS
    HoursAssignedToMow,
    CASE
    WHEN mowingstatus = 'Mowed'
    OR mowingstatus = 'Closed' THEN 1
    ELSE 0
    END AS
    NumberComplete,
    fact_highweedsandgrassdetails.recordimportdatetime,
    fact_casedetails.macsiebelnumber,
    fact_highweedsandgrassdetails.mowingduedate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.lastfeeinvoicedate,
    fact_highweedsandgrassdetails.investigationopendatetime,
    fact_highweedsandgrassdetails.investigationopendate,
    fact_highweedsandgrassdetails.investigationopendateid,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    ( vendormoweddatetime IS NOT NULL
    AND vendormoweddatetime <=
    fact_highweedsandgrassdetails.casecloseddate ) THEN
    fact_highweedsandgrassdetails.vendormoweddatetime
    ELSE
    CASE
    WHEN (
    fact_highweedsandgrassdetails.casecloseddate IS
    NOT NULL
    AND fact_highweedsandgrassdetails.casecloseddate
    <=
    fact_highweedsandgrassdetails.recordimportdatetime )
    THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(9, 2)) * 24 AS
    AbatementDurationHoursOLD,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate) IS
    NOT NULL THEN COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate)
    ELSE
    CASE
    WHEN ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
    AND fact_highweedsandgrassdetails.casecloseddate <=
    fact_highweedsandgrassdetails.recordimportdatetime ) THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(9, 2)) * 24 AS
    AbatementDurationHours,
    fact_casedetails.assigneddepartment,
    COALESCE (fact_casedetails.assignedstaff, '[null]')
    + '/'
    + COALESCE (fact_casedetails.assigneddepartment, '[null]') AS
    Assigned_Department_Staff,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.receiveddatetime,
    fact_highweedsandgrassdetails.assignedtovendordate,
    fact_highweedsandgrassdetails.vendorinvoiceamount,
    fact_highweedsandgrassdetails.invoicedstatusdate,
    fact_highweedsandgrassdetails.complaint_source,
    fact_highweedsandgrassdetails.inspection_result,
    fact_highweedsandgrassdetails.reason_for_complaint,
    fact_highweedsandgrassdetails.contractcompliancevendor,
    fact_highweedsandgrassdetails.vendor_action,
    fact_highweedsandgrassdetails.date_of_complaint_id,
    fact_highweedsandgrassdetails.date_of_inspection_id,
    CONVERT(INT, Replace(Replace(fact_highweedsandgrassdetails.casenumber,
    'HWG', 0)
    , '-', 0)) AS compliancejoin,
    fact_highweedsandgrassdetails.maccomments AS Expr1,
    dbo.dim_highweedscensustracts.b1_census_tract
    FROM dbo.fact_highweedsandgrassdetails
    INNER JOIN dbo.fact_casedetails
    ON fact_highweedsandgrassdetails.casenumber =
    fact_casedetails.casenumber
    INNER JOIN dbo.dim_highweedscensustracts
    ON fact_highweedsandgrassdetails.casenumber =
    dbo.dim_highweedscensustracts.casenumber
    GROUP BY fact_highweedsandgrassdetails.casenumber,
    fact_highweedsandgrassdetails.row_index,
    fact_highweedsandgrassdetails.mowingsector,
    fact_highweedsandgrassdetails.caseclosedflag,
    fact_highweedsandgrassdetails.casecloseddateid,
    fact_highweedsandgrassdetails.maccomments,
    fact_highweedsandgrassdetails.lastfeeinvoicedateid,
    fact_highweedsandgrassdetails.casehasvendorinfo,
    fact_highweedsandgrassdetails.mowingstatus,
    fact_highweedsandgrassdetails.receiveddateid,
    fact_highweedsandgrassdetails.assignedtovendordateid,
    fact_highweedsandgrassdetails.assignedtovendor,
    fact_highweedsandgrassdetails.reassigneddateid,
    fact_highweedsandgrassdetails.reassignedtovendor,
    fact_highweedsandgrassdetails.currentvendor,
    fact_highweedsandgrassdetails.currentassigneddateid,
    fact_highweedsandgrassdetails.mowingduedateid,
    fact_highweedsandgrassdetails.vendormoweddateid,
    fact_highweedsandgrassdetails.invoiced,
    fact_highweedsandgrassdetails.invoicedstatus,
    fact_highweedsandgrassdetails.invoicedstatusdateid,
    fact_highweedsandgrassdetails.vendorinvoicenumber,
    fact_highweedsandgrassdetails.vendorcomments,
    fact_casedetails.captypename,
    fact_casedetails.casenumbersubgroup,
    fact_casedetails.casetype,
    fact_casedetails.township,
    fact_casedetails.casestatus,
    fact_casedetails.caseopendateid,
    fact_casedetails.referredtolegalflag,
    fact_casedetails.macinitiatedflag,
    fact_casedetails.conversionstatusdesc,
    fact_casedetails.assignedstaff,
    fact_casedetails.completedstaff,
    fact_casedetails.closedbystaff,
    fact_casedetails.initiator,
    fact_casedetails.reasonforinvestigation,
    fact_casedetails.primaryaddress,
    fact_casedetails.parcelnumber,
    fact_highweedsandgrassdetails.vendormoweddatetime,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE (
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.recordimportdatetime))
    AS
    NUMERIC(9, 2)),
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.receiveddatetime,
    COALESCE (
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime))
    AS
    NUMERIC(9, 2)),
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.assignedtovendordate,
    COALESCE (
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.recordimportdatetime))
    AS
    NUMERIC(9, 2)),
    CASE
    WHEN mowingstatus = 'Mowed'
    OR mowingstatus = 'Closed' THEN 1
    ELSE 0
    END,
    fact_highweedsandgrassdetails.recordimportdatetime,
    fact_casedetails.macsiebelnumber,
    fact_highweedsandgrassdetails.mowingduedate,
    fact_highweedsandgrassdetails.vendormoweddate,
    fact_highweedsandgrassdetails.lastfeeinvoicedate,
    fact_highweedsandgrassdetails.investigationopendatetime,
    fact_highweedsandgrassdetails.investigationopendate,
    fact_highweedsandgrassdetails.investigationopendateid,
    Cast(Datediff([day],
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    ( vendormoweddatetime IS NOT NULL
    AND vendormoweddatetime <=
    fact_highweedsandgrassdetails.casecloseddate ) THEN
    fact_highweedsandgrassdetails.vendormoweddatetime
    ELSE
    CASE
    WHEN (
    fact_highweedsandgrassdetails.casecloseddate
    IS NOT NULL
    AND
    fact_highweedsandgrassdetails.casecloseddate <=
    fact_highweedsandgrassdetails.recordimportdatetime )
    THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE
    fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(9, 2)),
    Cast(Datediff(ss,
    fact_highweedsandgrassdetails.investigationopendatetime,
    CASE
    WHEN
    COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate) IS
    NOT NULL THEN COALESCE (vendormoweddatetime,
    fact_highweedsandgrassdetails.casecloseddate)
    ELSE
    CASE
    WHEN
    ( fact_highweedsandgrassdetails.casecloseddate IS NOT NULL
    AND fact_highweedsandgrassdetails.casecloseddate <=
    fact_highweedsandgrassdetails.recordimportdatetime ) THEN
    fact_highweedsandgrassdetails.casecloseddate
    ELSE fact_highweedsandgrassdetails.recordimportdatetime
    END
    END) AS NUMERIC(18, 2)) * 60,
    fact_casedetails.assigneddepartment,
    COALESCE (fact_casedetails.assignedstaff, '[null]')
    + '/'
    + COALESCE (fact_casedetails.assigneddepartment, '[null]'),
    fact_highweedsandgrassdetails.casecloseddate,
    fact_highweedsandgrassdetails.receiveddatetime,
    fact_highweedsandgrassdetails.assignedtovendordate,
    fact_highweedsandgrassdetails.vendorinvoiceamount,
    fact_highweedsandgrassdetails.invoicedstatusdate,
    fact_highweedsandgrassdetails.complaint_source,
    fact_highweedsandgrassdetails.inspection_result,
    fact_highweedsandgrassdetails.reason_for_complaint,
    fact_highweedsandgrassdetails.contractcompliancevendor,
    fact_highweedsandgrassdetails.vendor_action,
    fact_highweedsandgrassdetails.date_of_complaint_id,
    fact_highweedsandgrassdetails.date_of_inspection_id,
    CONVERT(INT, Replace(
    Replace(fact_highweedsandgrassdetails.casenumber, 'HWG', 0)
    , '-', 0)),
    fact_highweedsandgrassdetails.maccomments,
    dbo.dim_highweedscensustracts.b1_census_tract) AS
    [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS]
    ORDER BY [High_x0020_Weeds_x0020_and_x0020_Grass_x0020_FACTS].[compliancejoin]
    ASC
    SV

    I just counted the columns from the top:
    1) compliancejoin, 2) mowingsector, 3) caseclosedflag, 4) casehasvendorinfo, 5) mowingstatus, 6) assignedtovendor.
    I see now that your subject line talks about column 6, but you say column 5 in body of your original post.
    I don't know anything about cubes, but apparently there is some mapping problem when you run it from SSAS. (I assume it is SSAS, a part of the product I'm entirely ignorant of.) I figured that if you had got tripped by the zero-based numbering, you
    might be staring on the wrong column.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Hello there, I am creating a database of all our companies press contacts. I would like to create a form that would act as the front end and feed the database which is obviously the back end. The database is in Access 2013. My question is to whether this

    Hello there, I am creating a database of all our companies press contacts. I would like to create a form that would act as the front end and feed the database which is obviously the back end. The database is in Access 2013. My question is to whether this is indeed possible?

    This forum thread appears to point towards the problem.
    Re: Unable to Switch Audio Sync Settings

  • An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. mail will not be sent.

    Hii all,
    I have a subscription which used to send report email daily 10 am morning 
    now today it does not sent an email the status i s showing above error message ..
    why this occurs ?? at the time of subscription running time ??
    i have checked there is not error of subscription it runs fine ..
    only today errored ..
    Kindly , help me
    Dilip Patil..

    Hi Dilip,
    Based on the error message "An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database." it seems the issue is caused by the Report Server catalog databases are
    corrupted.
    To fix this issue, I suggest that you use the Reporting Services Configuration Manager to recreate the Report Server catalog databases. In addition, please make sure report server instance can connect to the report server database. For more details about Configure
    a Report Server Database Connection (SSRS Configuration Manager), please see the following document:
    http://msdn.microsoft.com/en-IN/library/ms159133.aspx
    Besides, if the issue is caused by the connection to the SQL Server Reporting Services Report Server catalog database is timeout. Please refer to the following thread:
    http://social.technet.microsoft.com/Forums/en-US/db4ca6c2-5445-4ff9-9f63-e20f3859cc70/error-throwing-microsoftreportingservicesdiagnosticsutilitiesreportserverstorageexception-an?forum=sqlreportingservices
    If the problem is still existed, I would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • SSRS 2008: connection failure, timeout or low disk condition within the database. (rsReportServerDatabaseError)

    Hi,
    I have started getting this error since a week now when I try to schedule a report or change a schedule of a report. 
    An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. (rsReportServerDatabaseError) Get Online Help For more information about this error navigate to the report
    server on the local server machine, or enable remote errors 
    We have SQL Server 2008 installed along with SSRS running on the server. I have never seen this happening before for almost a year now but suddenly it appeared.  Along with this, report subscription is also messed up and some report are not been
    emailed as they have a error like:
    Failure sending mail: An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database.Mail will not be resent. 
    I am not sure what caused this but if anyone has any idea of what is going on it will be great. 
    Thanks you for your help. 
    Please reply soooon !!!

    Rich, hi, sorry for my english but I speak spanish...
    Well, I was tried to recreate this issue and is really hard to recreate, however and as a rain from the sky, one of my customers receive the same error that you have, reviewing Windows Logs and SQL Traces there is nothing.
    Just for discard security issues I decide to change permissions in my server.
    1. Go to SQL Server Reporting Services Configuration Manager
    2. Go to Databases
    3. Verify the credentials used to connect to the database server
    4. Go to your database server
    5. Look for the login or user that is being used to connect to the database server from SSRS
    6. Change the role of that user and convert it to Sysadmin (Relax, this is not the final solution)
    7. Try again (Is not necesary to restart ANYTHING)
    8. Now, your SSRS and Subscriptions must work fine
    9. If your SSRS and subscriptions are working ok, you have to give some permissions to the user
    10. Grant execute permissions on
    master.dbo.xp_sqlagent_notify
    master.dbo.xp_sqlagent_enum_jobs
    master.dbo.xp_sqlagent_is_starting
    msdb.dbo.sp_help_category
    msdb.dbo.sp_add_category
    msdb.dbo.sp_add_job
    msdb.dbo.sp_add_jobserver
    msdb.dbo.sp_add_jobstep
    msdb.dbo.sp_add_jobschedule
    msdb.dbo.sp_help_job
    msdb.dbo.sp_delete_job
    msdb.dbo.sp_help_jobschedule
    msdb.dbo.sp_verify_job_identifiers
    11. Grant select permissions on
    msdb.dbo.sysjobs
    msdb.dbo.syscategories
    12. Grant public role to the user in the MSDB and Master DB
    13. Remove the Sysadmin role to the user
    14. Try again, now, your SSRS is ready to work
    Regards
    Pls let me know if work for you
    Regards | John Bocachica | jboca.blogspot.com

  • An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database

    Hello
    We just had this error today. We did not do ANY changes to our existing ReportServer database neither to our reports.
    Our infrastructure - we have sharepoint 2010 and sql server 2008 r2 with reporting services installed. 
    I confirmed the following:
    -->Disk space on database server OK:
    -->ReportServer database not corrupted - I restored the database to my test server and ran DBCC CheckDB.
    I am now looking at the Activity Monitor and have noticed that several SPID executed by the ReportServer database are blocked by a SPID executed by the ReportServerTempDB.
    Would blocking be a possible cause to this problem?
    Thank you all in advance

    Take a look into this  http://support.microsoft.com/kb/2146315
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Error Could not connect to the database - ora-12545: tns:name lookup failure

    Hi,
    I am a tech at a failing company. Unfortuneatly some users still need ADI installed and working with very limited resources to troubleshoot oracle. I am getting the error - ( Could not connect to the database - ora-12545: tns:name lookup failure )when the user tries to log on to ADI. Any suggestions? I would really appreciate it. We are on Windows NT on an NT network. Oracle 8.05 client installed and ADI 6.0.
    Thanks, Mary

    Copy the tnsname.ora file from Oracle Database serve onto the client PC.
    Path: %Oracle_home%\net80\admin\
    Send me a mail if there is any other issues
    Regards
    Oluseyi Funmi Oduberu
    Oracle Consultant
    Email:[email protected]
    Hi,
    I am a tech at a failing company. Unfortuneatly some users still need ADI installed and working with very limited resources to troubleshoot oracle. I am getting the error - ( Could not connect to the database - ora-12545: tns:name lookup failure )when the user tries to log on to ADI. Any suggestions? I would really appreciate it. We are on Windows NT on an NT network. Oracle 8.05 client installed and ADI 6.0.
    Thanks, Mary

  • I have been interested in how lightroom uses the catalog so was poking around a backup of the catalog. I found it rather concerning that although the database (catalog) is pretty well designed, there is no referential integrity defined or enforced.

    I have been interested in how lightroom uses the catalog so was poking around a backup of the catalog.  I am a database administrator and I found it rather concerning that although the database (catalog) is pretty well designed, there is no referential integrity defined or enforced. This is non-standard practice and could well be the source of corrupt catalogs I have seen many people complain about. I would strongly recommend the developers modify the catalog and adopt best practices if they want to improve the stability of Lightroom and the catalog.

    I would imagine that data integrity is not enforced for performance reasons. In a closed environment like LR where the application has complete control over the data, enforcing data integrity may not be worth the performance hit. Often what is done in an environment like this is to have data integrity on in test environments which would expose data integrity bugs but where the impact of performance is low. In "production" it is then turned off to get as much performance as possible. I would say there are many more complaints about performance than corrupt catalogs. And corrupt catalogs are more likely due to interruptions in writing to the catalog (like crashes, backups or dropbox activity while LR is running, etc). Data integrity would not help in these cases as they are outside the databases control.

  • Connection not closed in the database server end

    Hi,
    Our database server (sql server 2000) and java application are running in two different boxes. Because the java application sent to the db server quite a few queries that can not be completed (applications hangs there) due to huge amount of data (18 million records in one table and 1 million records in another table and there are joins among the three tables), we stopped the java program. However, in the db server end, the connections associated with these problem queries were not closed although the java app end already closed these connections by calling connection.close(). When this happened, we have to manually close the connection from sql server enterprise manager.
    Here are the questions.
    1)what could be the reason why db server does not close the connection?
    2)Is there any solution in the java end that could close the connection in the db server end when this situation happens? I say this situation happens, I mean in most cases when java application closes connection, db server closes connections in its end too.
    Thanks
    Mark

    mark.lin wrote:
    Thanks for your answers and questions.
    Here are the answers to your questions
    1)The jdbc driver is jturboJTurbo? Never heard of it. You mean this?
    http://www.newatlanta.com/products/jturbo/index.jsp
    Why pay for something when you have two options available that are free? One of them is from Microsoft itself. Whose idea was this?
    2)It's a desk top application.
    It seems to me that it should not be driver issue. I was this happened the Microsoft's own jdbc driver. By jdbc specification, although you don't close the connection explicitly in the program, the connection will be automatically closed in the java app end during garbage collection. Very bad - never depend on this. Always close your ResultSet, Statement, and Connection in reverse order of opening in a finally block, each one wrapped in individual try/catch blocks.
    One should never, ever depend on the GC to take care of resources like database connections or resource handles. Those should be cleaned up by your code.
    I tested this by intentionally not closing a connection. When I stops the application, the connection in the sql server end was also closed.
    But if you don't close the application and fail to close connections, you can see where eventually you'll exhaust the pool.
    It seems to me this is a sql server issue rather than a jdbc driver issue. I need way to prove this.
    Like I suggested, it's easy to swap in the jTDS driver and try it again. What do you have to lose?
    Or call Microsoft support and ask them. Or maybe JTurbo. You're paying for it - might as well use the support.
    %

Maybe you are looking for

  • Highlighting text in JtextArea

    I want to highlight text in a JTextArea each time the text changes and therefore i use a DocumentListener and also the following : public Highlighter.HighlightPainter redHighlightPainter = new DefaultHighlighter.DefaultHighlightPainter(Color.red); Hi

  • How to execute System command through Applet

    Hi all, How can I execute a System command through Applet. I have written a code Runtime.exec("ls") in my applet but it gives me this execption even if I certify the applet -> java.security.AccessControlException: access denied (java.io.FilePermissio

  • How to install software before user's logon?

    Hello! I have a problem. I want to install software before logon user to computer. I have applied a "Wait for network policy" to all our computers in 2003 domain, but on Windows 7 a script that installs software continues to work before and after log

  • IPhoto vs Aperature

    I am a long time user of iPhoto. There are some new "plug-ins" in the market now, that seriously excite me, but as a plug-in, they won't work in iPhoto. There are currently 35K+ photos in my library. If I switch over to Aperature, what should I expec

  • Multi-Currency and Multi-Language

    Hello, What issues does an ABAP developer need to be concerned about when programming objects that involve multiple currencies and multiple languages? Rae