MDB unable to listen anymore after remote JMS server crashed and restarted

I'm running Weblogic Server 8.1 SP4 on a Win 2k server. My remote JMS server is running Sonic 6.0 on a Win 2k server. Both are connected in the same network. My problem is that whenever I restart the JMS server after it crashes (improper shutdown), my MDBs will not be able to listen to any messages sent to the topic/queue. WL console does not display any error about MDB unable to connect to the topic/queue as if the JMS server was never down. I have to re-deploy my apps in order to get the MDBs working. Is there a workaround or patch for this 'bug'?

The options I can think of are:
          (1) Configure a WebLogic messaging bridge that runs in "synchronous" mode for forwarding messages from Sonic to a WL destination. Then change MDB to refer to the WL destination. Alternatively, if you haven't already, try using a transactional MDB - which may or may not use synchronous receives to get messages from Sonic (depends on the version of Sonic I believe). The reason I think this might help in either method is that I think the use of synchronous receives may yield a better chance of detecting failures in Sonic.
          (2) See if Sonic itself requires a patch.
          (3) Try out WL 9.2 instead of WL 8.1 (it may be that the Sonic work-around I vaguely recall isn't in 8.1???)
          (4) Contact customer support.

Similar Messages

Unable to start connection on remote JMS server

          HI
          I have a setup in which I try to connect to a remote JMS Server (running on a
          remote WLS 8.1 SP1). It is able to get the named QueueConnectionFactory, fails
          to start the connection. The stack trace is
          weblogic.jms.common.JMSException: Connection not found
               at weblogic.jms.dispatcher.InvocableManager.invocableFind(InvocableManager.java:136)
               at weblogic.jms.dispatcher.Request.wrappedFiniteStateMachine(Request.java:596)
               at weblogic.jms.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:153)
               at weblogic.jms.client.JMSConnection.start(JMSConnection.java:567)
               at uk.co.concise.payments.event.EventProcessorServiceAsynchBD.(EventProcessorServiceAsynchBD.java:82)
               at uk.co.concise.payments.state.ejb.ObjectStateServiceXDBean.ejbCreate(ObjectStateServiceXDBean.java:213)
               at uk.co.concise.payments.state.ejb.ObjectStateService_1th3um_Impl.ejbCreate(ObjectStateService_1th3um_Impl.java:135)
               at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
               at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
               at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
               at java.lang.reflect.Method.invoke(Method.java:324)
               at weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.java:172)
               at weblogic.ejb20.pool.StatelessSessionPool.getBean(StatelessSessionPool.java:110)
               at weblogic.ejb20.manager.StatelessManager.preInvoke(StatelessManager.java:140)
               at weblogic.ejb20.internal.BaseEJBLocalObject.preInvoke(BaseEJBLocalObject.java:229)
               at weblogic.ejb20.internal.StatelessEJBLocalObject.preInvoke(StatelessEJBLocalObject.java:54)
               at uk.co.concise.payments.state.ejb.ObjectStateService_1th3um_ELOImpl.createAndGetStateForObject(ObjectStateService_1th3um_ELOImpl.java:273)
               at uk.co.concise.payments.state.ObjectStateServiceBD.createAndGetStateForObject(ObjectStateServiceBD.java:123)
               at uk.co.concise.payments.submission.ejb.SubmissionServiceXDBean.createSubmission(SubmissionServiceXDBean.java:92)
               at uk.co.concise.payments.submission.ejb.SubmissionService_o0dxp8_ELOImpl.createSubmission(SubmissionService_o0dxp8_ELOImpl.java:162)
               at uk.co.concise.payments.submission.SubmissionServiceBD.createSubmission(SubmissionServiceBD.java:42)
               at uk.co.concise.payments.submission.webapp.SubmitPaymentFileAction.execute(SubmitPaymentFileAction.java:216)
               at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:446)
               at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:266)
               at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1292)
               at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510)
               at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
               at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
               at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
               at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
               at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
               at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
               at uk.co.concise.payments.logon.filter.LogonFilter.doFilter(LogonFilter.java:38)
               at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
               at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6316)
               at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
               at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
               at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
               at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
               at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
          Any ideas on what could be wrong
          thanks
          jaz


          Thanks Tom
          It fixed the problem.
          Jaz
          Tom Barnes <[email protected]> wrote:
          >Hi,
          >
          >I think "Connection not found" may be a symptom of a name
          >conflict. Make sure:
          > All JMS servers are named differently
          > All WL servers are named differently
          > All JMS stores are named differently
          >All three above are needed for various reasons, although I think
          >it is only first that fixes your particular problem.
          >
          >A google search of this newsgroup would likely have yielded this
          >same answer.
          >
          >Tom
          >
          >jasmeet wrote:
          >
          >> HI
          >>
          >> I have a setup in which I try to connect to a remote JMS Server (running
          >on a
          >> remote WLS 8.1 SP1). It is able to get the named QueueConnectionFactory,
          >fails
          >> to start the connection. The stack trace is
          >>
          >> weblogic.jms.common.JMSException: Connection not found
          >>      at weblogic.jms.dispatcher.InvocableManager.invocableFind(InvocableManager.java:136)
          >>      at weblogic.jms.dispatcher.Request.wrappedFiniteStateMachine(Request.java:596)
          >>      at weblogic.jms.dispatcher.DispatcherImpl.dispatchSync(DispatcherImpl.java:153)
          >>      at weblogic.jms.client.JMSConnection.start(JMSConnection.java:567)
          >>      at uk.co.concise.payments.event.EventProcessorServiceAsynchBD.(EventProcessorServiceAsynchBD.java:82)
          >>      at uk.co.concise.payments.state.ejb.ObjectStateServiceXDBean.ejbCreate(ObjectStateServiceXDBean.java:213)
          >>      at uk.co.concise.payments.state.ejb.ObjectStateService_1th3um_Impl.ejbCreate(ObjectStateService_1th3um_Impl.java:135)
          >>      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
          >>      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
          >>      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
          >>      at java.lang.reflect.Method.invoke(Method.java:324)
          >>      at weblogic.ejb20.pool.StatelessSessionPool.createBean(StatelessSessionPool.java:172)
          >>      at weblogic.ejb20.pool.StatelessSessionPool.getBean(StatelessSessionPool.java:110)
          >>      at weblogic.ejb20.manager.StatelessManager.preInvoke(StatelessManager.java:140)
          >>      at weblogic.ejb20.internal.BaseEJBLocalObject.preInvoke(BaseEJBLocalObject.java:229)
          >>      at weblogic.ejb20.internal.StatelessEJBLocalObject.preInvoke(StatelessEJBLocalObject.java:54)
          >>      at uk.co.concise.payments.state.ejb.ObjectStateService_1th3um_ELOImpl.createAndGetStateForObject(ObjectStateService_1th3um_ELOImpl.java:273)
          >>      at uk.co.concise.payments.state.ObjectStateServiceBD.createAndGetStateForObject(ObjectStateServiceBD.java:123)
          >>      at uk.co.concise.payments.submission.ejb.SubmissionServiceXDBean.createSubmission(SubmissionServiceXDBean.java:92)
          >>      at uk.co.concise.payments.submission.ejb.SubmissionService_o0dxp8_ELOImpl.createSubmission(SubmissionService_o0dxp8_ELOImpl.java:162)
          >>      at uk.co.concise.payments.submission.SubmissionServiceBD.createSubmission(SubmissionServiceBD.java:42)
          >>      at uk.co.concise.payments.submission.webapp.SubmitPaymentFileAction.execute(SubmitPaymentFileAction.java:216)
          >>      at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:446)
          >>      at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:266)
          >>      at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1292)
          >>      at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:510)
          >>      at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
          >>      at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
          >>      at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
          >>      at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
          >>      at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
          >>      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
          >>      at uk.co.concise.payments.logon.filter.LogonFilter.doFilter(LogonFilter.java:38)
          >>      at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
          >>      at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6316)
          >>      at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
          >>      at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
          >>      at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
          >>      at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
          >>      at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
          >>      at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
          >>
          >>
          >> Any ideas on what could be wrong
          >> thanks
          >> jaz
          >

MDBs failed to connect to remote JMS server

Hi,
          We currently have 2 clusters: one is a regular cluster (cluster1) and the other is JMS cluster (cluster2). Our JMS server and filestore are targeted to a migratable server in JMS cluster.
          In our weblogic-ejb-jar.xml, we added element <provider-url> to the <message-driven-descriptor> to allow JMS remote connection as follows:
          <weblogic-enterprise-bean>
               <ejb-name>MyBean</ejb-name>
               <message-driven-descriptor>
                    <destination-jndi-name>MyTopic</destination-jndi-name>
          <provider-url>t3://myhost:19009,myhost:19011</provider-url>
          <connection-factory-jndi-name>MyConnectionFactory</connection-factory-jn
          di-name>
               </message-driven-descriptor>
          </weblogic-enterprise-bean>
          When we deployed our application, the Connection Status of MyBean showed "disconnected". I have tried different values (t3://myhost:19009;t3://myhost:19011) and
          (t3://myhost:19009) but got the same result.
          When I re-targeted the JMS server and filestore to a regular server (instead of migratable server), I was able to connect remotely. But because we want to be able to migrate our JMS server (auto and manually), I have to target it to a migratable server.
          I could not figure out why my MDBs failed to connect to a remote JMS server when it is targeted to a migratable server? Is there a restriction that we have to target to a regular server in order to connect remotely or I'm doing something wrong?
          Any help would be greatly appreciated.
          Thanks,
          Thao

I'm using WL9.2 and my migratable server is actually up and running (is that what you mean about booted?).                    I meant checking your log files to make sure that the JMS server itself actually booted, not checking that the host WL server was up. (For example you should see INFO messages indicating that the JMS server has loaded "X" records from its persistent store).
          >>> Could you elaborate on the known problem?
          9.x MDBs have special code for enhanced handling of remote distributed destinations. I'm guessing that this code is somehow causing problems when the remote JMS server is migratable. I don't have enough information to elaborate further than that.
          >>> What else I can try?
          Beyond contacting customer support, I'm not sure.
          Tom

JMS Adapter to remote JMS Server in ESB??

Has anyone successfully setup a JMS adapter in the ESB to talk to a JMS server on a remote host?
We are using OC4J JMS and so I followed the instructions in section 5.2.1.7 in the Adapters guide on this. I updated the oc4j-ra.xml file. The guide didn't state which version of oc4j-ra.xml to update, but I've been told to use the one in:
$ORACLE_HOME/j2ee/<oc4j>/application-deployments/default/
So, I added the XML block as specified in this section and made the JMS Connection JNDI name match that of my JMS Adapter. However, the Adapters guide then states the following:
In addition, you must have the file META-INF/application-client.xml in the
classpath. The contents of the file can be the following:
<application-client/>
To put this file in the classpath, put the specified contents into the file at Oracle_
Home\bpel\system\classes\META-INF\application-client.xml and
restart Oracle BPEL Server.
This is a problem for me because I have an advanced installation with ESB and OWSM on top of OC4J, but I do not have BPEL installed in this location. As such, the file $ORACLE_HOME/bpel/system/classes/META-INF/application-client.xml does not exist. I did a search and did find an application-client.xml at the following location:
$ORACLE_HOME/j2ee/oc4j_esbdt/connectors/JmsAdapter/JmsAdapter/META-INF
But at this point, I don't know what to do with it to ensure it is in the classpath. The Adapters guilde says to cycle the BPEL Server, so I cycled the ESB for good measure, then deployed my project, but no luck! It is still listening to the local jms server and not the remote one.
Has anyone successfully set this up? What am I missing or doing wrong?

The above classpath requirement should only ensure that BPEL module can access the JMS adapter. Otherwise it should be OK.
I would reccommend to try to establish the JMS connection and see if some parts of the Oracle AS will throw any exception or something. It might start working as well.
As I understand, you are trying to access OC4J JMS from another server. As JMS is purely TCP level protocol there should be no problem accessing it from anywhere. Only the addresses and ports must be reviewed and ensure that they point to correct place, that usernames and passwords are correct and that there is a JNDI connectivity available as you use JNDI to get the connection factories.
Rein

MDB on OC4J consuming from a forign JMS Server

I would like to create MDBs and deploy them to OC4J. But these MDBs need to consume messages from non-AQ JMS Servers. We are currently using MDBs in OC4J that consume from Oracle AQ using resource adapters. But we now have a need to use other JMS servers such as OpenJMS and JbossMQ.
I have read documents that seem to indicate
Message-driven beans are supported only for Oracle JMS.
Does this mean I cannot create a resource adapter for JbossMQ and deploy a MDB to OC4J that consumes from this JMS Server?
Any help would be most appreciated!
Thanks, Paul.

Anybody has faced similar issue?

With Firefox 4 gmail stays logged in after Firefox is shut down and restarted

This is related to the post mentioned here: https://support.mozilla.com/en-US/questions/811479
with a twist.
In Firefox 4 if you shut down the browser without signing out of gmail you stay signed in, even after a full system shutdown and restart.
I HAVE NO APP TABS etc, and my security settings are also normal (viz. no stay signed in etc etc) I also always use HTTPS
(In earlier versions, if you didnt always use https, then shutting the browser wouldnt log you out. But if you always used https, you would be logged out)
Heres what happens: First let me make it clear that I have no app tabs, and all the other settings are correct (viz. no stay signed in etc etc). Now say one of the open tabs is my mail inbox. If I close and restart browser, I'll be in my inbox!! (Earlier versions of firefox took me to the login page).
Whats the issue here? Does everyone else also experience this?

This is a massive design flaw or bug and needs fixing; I can't recall a larger direct security issue than leaving people prepped for auto-login upon closing a browser, and to one of the most popular email providers in the world. Persisting since v.4 all the way up to current v7.0.1. Ridiculous.

HELP"apple application support not found when installing itunes after a hard drive crash and replace

HELP" error "apple application support not found" when downloading itunes after a hard drive crash and replacement????

Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I just had to reformat my pc after a massive system crash and luckly my ipod toch had all my music and vids my home pc had from my itunes account is there any way to put my stuff bac on my new system

i had to reformat my PC after a massive system crash and luckly all my itunes songs and vids were on my itouch is there anyway to restore my info one my newly wiped clean pc

If you backed up the iPod before restoring it then restore from that backup. See the restore topic of:
iOS: How to back up
Also, if yoo have that backup you can extract the photos by:
Recover iPhone, iPad or iPod photos from backups with Picturescue
If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
iOS: Importing personal photos and videos from iOS devices to your computer

All of my music was erased from my computer after my hard drive crashed and I don't want to spend the time uploading all of my old CDs to my computer. If I plug in my iPhone with all of my current music on it, will it sync to my computer?

All of my music was erased from my computer after my hard drive crashed and I don't want to spend the time uploading all of my old CDs to my computer. If I plug in my iPhone with all of my current music on it, will it sync to my computer?

This user tip should be helpful too.
Syncing to a "New" Computer or replacing a "crashed" Hard Drive

How to create a JMS queue linked to external (remote) JMS server?

Hello,
I'm trying to receive messages from a remote JMS queue. I found some information on the Internet on how to create an external JNDI resource (my remote JMS queue connection factory is bound to LDAP context on remote box). I was able to configure JNDI resource that points to remote queue connection factory, but I don't know what to do next.
How can I create a local JMS destination (queue) that will be the image of the remote queue? At least I'm guessing this is what needs to be done in order to deploy MDBs.
I would appreciate it if someone could tell me how to get this working. Maybe the steps I took were not in the right direction - the bottom line is that JMS queue and queue connection factory are deployed on a remote server, and I need to get messages sent to them on the local server. I'm using Sun App Server from J2EE 1.4.
Thank you,
Mark

Please refer to http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6377822, particularly the evaluation. Could your situation be the same too (i.e server ip address changing dynamically)? Also, which OS are you using and do you have any firewalls setup that prevents access to port 3700?

WebDB 2.1 Listener connecting to remote WebDB server

Any pointers on connecting a dedicated WebDB listener to a WebDB server on a remote system. Directions are a bit obtuse.
Frank

We have solved this problem by using "Remote Link" to tables on Server and creating views on Listener system to tables on Server.
You have to copy/create your WEBDB forms to/on Listener System (as far as I know).
But be carefull some "standard buttons" like "Add New" does not perform/show at all.
Please let me know if you find a better solution.

Unable to connect to the remote ftp server using dreamweaver.

For the last one week I have been trying to connect to the remote ftp server using dreamweaver. I spoke to the technical support agency who manage our remote server but they are saying that there is no problem with the server adn they dont know anythign about dreamweaver so cant assist me.
I was suggested to check with adobe team directly and i spoke to a technical support person on the live chat but they said since the version is CS4 - education version, they cant assist me at all!! This is just ridiculous...I am constantly being sent from one place to the other without anything getting resolved!!
Please help somebody!!

I am having a similar problem... maybe. I was connected to my remote site all day yesterday, then out of the blue I tried to "put" an edited file... as I had been doing all day, and I received an FTP error: Cannot make connection to host. Your login or password is incorrect. That's odd, I've been connecting all day. So I went into my sites > manage sites and clicked the Test button on my remote server information and it returned Adboe Dreamweaver CS connected to your webserver successfully. I went back to my file and tried once more to "put" it on the remote server... again FTP Error: cannot make connect to host... So I reboot my computer and start Dreamweaver CS3 again. I reenter my remoter server information and click the Test button. "... connect to your webserver successfully". I try to put any file, FTP error again. So I call my server administrator, he checks the servers logs and says there are no errors and you've connected successfully several times today. I went through the trouble shooting steps listed here, though my FTP Logs are empty. I cannot stay connected or even see the remote folders to try to drag and drop. I tried to run ftp from a windows command prompt and it seems to connect me.
I downloaded an installed an SFTP client and was able to successfully connect to my remote server and upload the files. It's definately a Dreamweaver problem. Any suggestions?

Recovering after a hard drive crash and restore

I have a question before I sync my iPod again;
I had a operating system hard drive crash a little while ago, and I reimaged my drive with a three month old backup, basically I rolled back my computer's state a couple months, and with it, the state of my iTunes library.
Now, my library is going to be missing songs that my iPod has, does this mean when I sync my iPod again iTunes is going to delete those songs it doesn't know about anymore? I don't recall seeing the option to "manually manage" the iPod anymore, but even in that case does this mean I can't automatically sync again?
I understand that I can't use iTunes to pull songs off my iPod but thats not what I want. Essentially I want to rebuild my iTunes library list from what the iPod has, even if it can't find the songs on the local disk anymore, I just don't want them deleted.
Maybe I'm approaching this problem the wrong way..

Hi there,
I'm struggling with the exact same issue, so I'm hoping you get a response soon from someone who knows what the g-o may be... I did sync my iPod after my hard drive crashed, but I had iTunes already configured to 'manually manage' my music, so it didn't clear my entire iPod. I'm just scared of accidentally deleting certain music off my iPod playlist that I didn't burn onto disc & so I'd lose it for good.
Let's hope someone's got an idea...

Display drivers crashing and restarting after opening any image in Photoshop CS6. After that Photoshop CS6 doesn't respond.

I have just purchased Acer Aspire R7 (2nd Genre). I have installed Photoshop CS6 as trial. Now when I open any image or drag any image in Photoshop I get this error in the taskbar "Display driver stopped responding and has recovered". After that Photoshop doesnt respont and I have to force close it from task manager.
Can anyone guide me how to solve this issue?

Well, what more do you need to know? Update your graphics drivers and configure them suitably.
Mylenium

Recently subscribed to itunes match and every time i go on itunes match starts to load songs b ut after 5 mins it crashes and turns off please help as it cost me $35 and wont work

recently purchased itunes match .but now every time i turn on itunes it starts to load song ect but after 5min or so it crashes and turns off

Hi,
I suggest that you open iTunes and hold shift key whilst signing out of match. Now close iTunes and reboot computer. Launch iTunes and then turn on match. You will be asked to add this computer. Do so. Let match process complete.
Jim

MDB unable to listen anymore after remote JMS server crashed and restarted

Similar Messages

Maybe you are looking for