MDG-Material and IS-Retail
Hi everyone,
My client is looking for a solution to easily create material master data, including Excel upload and they are running on ECC EHP4 with IS-Retail with only one domain. I am aware of the potential solutions LSMW, Winshuttle, and they are part of the evaluation that do not give governance capability, just data upload.
I was wondering if MDG material could be easily tailored for IS-Retail? I learned from SAPPHIRE that MDG is not tailored to Retail (just standard ECC) and it will need to be extended for the retail specific tables.
Has anyone considered MDG-material for IS-Retail?
Thanks,
Jenny
HI Jenny
Not sure if you are still looking for a governance solution for your article master data needs. There is content available now on the MDG platform for Article data governance, you can refer to this blog for more details, if you have further queries you can write to me....
http://scn.sap.com/community/mdm/master-data-governance/blog/2014/04/17/sap-master-data-governance-for-governing-retail-articles#comment-483401
Hope this helps
Dilip
Similar Messages
-
MDG - Material and Financial Data Models
Hi,
Can anyone help me to get standard business content as per latest version for MDG-Material and MDG-Financial Data Models.
Thanks,
NarendraPlease go through the below link it talks about all the latest updates.
Configuration and Enhancement of SAP Master Data Governance -
Any send is-retail material and transaction codes
Hi,
i am new to is-retail. i need is-retail material and transaction codes.
1.how can i found article hierarchy?
2.transaction code for article creation?
3.transaction for country, zone, state, city, store, concepts?
4.transaction code for product category?
Regards,
venkat.Please look at
Master Data in SAP Retail: Some deep hints
Regards
B -
Same material and customer but different prices for different regions
Hi all,
I have a scenario, wherein material and customer are same but different ship-to-parties. Prices vary for the material for different regions.
Kindly suggest how to maintain condition records in this scenario. I have tested for a material for different regions but with the same prices which is working fine, but now I have to do this with different prices.
Your suggestion will be very helpful as this is very important in this business.
Thanks and Regards
AdithyaSwapneal
I have right now only four key combinations for PR00;
1. Customer/Material with release status.
2. Pricelist Category/currency/Material with release status.
3. Material with release status.
4. Price group/Material.
Can this be done with the 2nd Key Combination?
Item data; Sales B tab shows Price List as Retail and Wholesale; here we have only Wholesale Business. Kindly suggest.
Thanks and Regards
Adithya
Edited by: Adi1976 on Jan 18, 2012 9:04 AM -
Report for material and their pricelist
Hi all
I want to create a report, which displays the material and their pirce, I know there is a t-coke vk13, but u know the end users......actually i want to have this pricing for only service dept, where sales org , div , pricelist type are fixed.
I am not able to find the tables which have these relations of material and price.
I got one table A961, which doesnt shows the price, and price I found in KONV, but there is no relation between them......can any body help me out.....
Kind regards
AJHi
i cant find the material desc there, also fields like divison , Price list type are missing, they are not there in both the tables, can u tell me which other table I can use , so that I can get all the fields
regards
AJ -
MB5L Report Discrepacy for Material and Stock Account Currency
I have found in the MB Report Discrepancy for Material and Stock Account Currency. Why is this happening? Why is there a variance between total price in materials and stock account? Anyone please help me. I'm abaper but now been pushed to do logistic. I need help for this issue.
Hi,
Here's some information from help. Variances can occur for the following reasons:
You have entered postings to the stock account manually.
The stock account includes not only stock postings, but also other postings. In this case, you should check the account determination in the Customizing for Valuation and Account Assignment. Make sure that the stock accounts are used solely for the transaction key BSX (stock postings).
Check Account Determination - OMWB
The account assignment for the stock accounts (transaction key BSX) was changed during productive operation; the respective stocks, however, were not deducted from the old account (movement type 562) and posted to the new one (movement type 561).
Cheers ! -
With holding tax report with material and qty fields
Dear All,
Is there any standard report available with with holding tax data with material and qty fields.
Thanks,
Sekhar.dear Friend,
Withholding tax will deduct on services. Hence Material and quantity is not relavent.
There is no report is available also.
reg
Madhu M -
Report showing Invoice number, vendor,material and qty
Hi Guys
Is there any report where we can take report for vendor, invoice number, material and qty.
RegardsDear
yeah! yau can check ME80FN with purchase order history setting.
full marks to me if solved
regdsd
dev...! -
Material and representative material in PCA
Hello all,
I have an issue concerning material numbers in Profit Center Accounting. My aim is to be able to report on material group (attribute on 0MATERIAL) in BW for both plan and actuals.
In R/3 PCA they plan on field "representative material". Furthermore they post actuals on "material" field.
Extractor 0EC_PCA_1 brings all postings (plan + actuals) to BW, but does not include the "material" field. It only includes the "representative material" field, so I'm missing the possiblity to see the actuals per material number.
Extractor 0EC_PCA_3 brings all actual postings to BW and includes the "material number". However the representative field is not filled (since this is only actuals)
So I get what I need into BW, but in two different extractors (and also on two different aggregation levels).
I somehow need to merge the information of these two extractors. Is it a multi cube I should use here? Or should I rather try to modify 0EC_PCA_1 by adding the material number in an append structure? I actually tried this, but I still couldn't find the new field in the extractor. So I guess this is not possible here and that I have to go for the multi cube solution?
I need to get both the "representative material" and the "material" into info object "0MATERIAL" since the material group is an attribute of that. Could this work if I modify the update rules in cube 0PCA_C01 (this is filled with records from 0EC_PCA_1) so that repr. material points at 0MATERIAL (for plan values) and at the same time use cube 0PCA_C03 (this is filled with records from 0EC_PCA_3) which uses 0MATERIAL as standard (for the actuals).
I'd be extremely thankful for some ideas/help...
Thanks in advance!
best regards,
FredrikHi Fredrik,
Some questions:
Is there a 1 on 1 relation between repr. mat. and material?
Do you have PCA_1 as Totals or Line Items?
If you want to report on material group you somewhere have to have a relation between repr. material and mat. group.
Of course you can always map the rep. into 0MATERIAL, but you MD has to be correct too.
And: Adding in PCA extractors is difficult! -
Material and Service in a Single Line Req
Hi
We hv a requirement of material and service in a single line item, Exampls is client ordering some fabrication work to one vendor. It involves both matl and service changre.
For the matl cost we need to calculate VAT and for the service charge we need to calculate service tax.
For ex 1000 is the total amt for a line item. In this 600 to be calaulated for VAT 4% and for balance 400 to be calculated as serv tax 12.5%.
The same is happening in sales and they can be do this. How tro do the same in MM purchasing.
VijayHi
Can it be possible to make a PO only one line item. Say item 10 thats only one item. That line 10 have both matl and service.
Both matl tax and service tax need to be calculated for the line item 10.
Is this possible.
Client dont req these as 2 line items. Here the scenarion and req is like that.
Vijay -
No inspection lot can be opened for this material and vendor -QA228
Hi every one !
Iam getting Error while doing Migo -"No inspection lot can be opened for this material and vendor-QA228"
we analyze the issue asfollow -
1.checked Quality Lot-Available
2.Quality info record- Availble
3. Quality plan is exist.
But stil throwing above Error.Hi,
Check the below threads,
[No inspection lot can be opened for this material and vendor;
[No inspection lot can be opened for this material and vendor; -
A/R extractor - Material and Invoice Amount
Hi Gurus,
I just wanted to extract Material and Invoice amounts for Accounts Receivables from R/3 to BW?
Is there any standard extractor for the same.
I found 0FI_AR_4 but it doesnt have material field.
How can I link the BSID table with material.
Is it via Sales Document (VBELN)?
Regards,
SriniHi Srinivas ,
Invoice is part of AR but material (0material ) is not part of AR .It is part of SD .If you are looking for this field you may not find it .
You can check standart key figure and Characteristics available under it in this link :
http://help.sap.com/saphelp_nw70/helpdata/en/3b/eac53976b78867e10000000a11402f/frameset.htm
If you want material you need to use SD material .If you want these fields for a report then you can make a multiprovider with AR and SD cubes Having both material and Invoice .
Regards,
Jaya -
Query on material and quantity updation
I updated material and quantity updation for a particular material type and plant combination in development server. Before transpoting in transport request, when I View Cluster Maintenance: Data, I am able to see that in table T143M is also updated for some other plant and material types which I had not done in customising. Also note that for the entries in transport for all plant and material type combination other than intended one, there are no qunatity and value updating which had been activated. Can someone throw light as to whether is it a functional or techinal issue which is causing this?
Hi,
whenever your copping new material type from existing one it will copy all the setting ie screen reference , attributes and even quantity / value update also . so it will display like that . -
Need field and table for spare part material and price for a given material
Hi,
In need to create a report with following fields:-
Customer Material spare part material spare part description price currency.
From which table and field I can get all this information.Please guide me.
Hint. cl30n transaction for material managemant.
vk13 transaction for price maintenace.
Regards.CL30N is a general transaction that can be used for any classification, but material master maintenance is usually MM01/MM02 or MM41/MM42
Material description can be taken from table MAKT
customer from table KNA1
The question is what you are going to analyse? where do material and customer tie together? do you do the analysis on sales orders VBAK and VBAP ? or invoices VBRK and VBRP? or customer material info record KNMT?
or do you capture this info in classification? then you get the values from AUSP
Edited by: Jürgen L. on Aug 3, 2010 9:42 AM -
Projected Stock for a given Material and Location (System: SCM-APO)
Hello Experts,
Appreciate, if anybody can help me in getting a time-series key-figure data (Stock-On-Hand for a given Material and Location) for a given period.
I am working on a report to display the projected stock (Material & Location are known) for a given period (1 month).
I am able to view the above data in my planning book.
Thanks in advance.
Regards,
Prasanna
Edited by: Prasanna Gunji on Apr 9, 2010 3:42 PMHi Prasanna,
9ASOQMQTY - Stock in quality inspection
9ASOTRSQTY - Stock in transit
9AAVLSTCK - Projected Stock
Hope this helps
Regards
R. Senthil Mareeswaran.
Maybe you are looking for
-
Primitives and garbage collector
Hi everyone, Do primitives get garbage collected? Is it recommended to set all references to null in a classes finalize method? Thanks
-
I orginally sync my Ipad with another computer, now I want to sync with another computer
I originally synced my Ipad with another computer, now I want to sync with anohter computer, I don't want to erase my Ipad and sync with my Ipod.
-
Identifying application name using Portal API
Hi I have a Web Dynpro Java component that is being used in two different applications. I'm just wondering if there's a way to programmatically tell which application it was that called the component when a user enter certain input? Regards, Revathi
-
How to install Oracle Process Automation for Mobile
Hi I want to install Oracle Process Automation components for Mobile. I have downloaded the V20466-01.Zip file from Oracle Website, i dont find any setup file to intall OPA. Please let me know how to install OPA( i already installed Oracle Process Mo
-
Eliminating Junk Mail on Iphone using an IMAP mail server
Hello! Doesn't sound like there is a fix for this, but its always worth asking..., I currently have my own IMAP email server with my company on an XServe. When I receive mail on my Iphone it bypasses all my post-server junk mail rules on my powerbook