"mDNSPlatformSendUDP sendto failed to send packet" Log Error

Hi y'all:
I am running Mac OS X Server as a standalone server in my netwrok, however, I keep getting this weird log on the Console:
Nov 16 00:31:25 server mDNSResponder: mDNSPlatformSendUDP sendto failed to send packet on InterfaceID 0180EE00 en0/4 to 224.0.0.251:5353 skt 19 error -1 errno 13 (Permission denied) 2078098704
I checked the ipfw log and it shows the following:
Nov 16 00:20:51 server ipfw: 65534 Deny UDP 192.168.0.100:5353 224.0.0.251:5353 in via en0
(((192.168.0.100 is a wifi workstation in my network)))
Can anybody explain to me what is going on on the server and client. There seem to be a network service (on both machines) that is trying to broadcase, if so, how to shut it down? what impact, if any, does it have on the system of both machines?
Regards,
Nawaf
Mini 1MB Mac OS X (10.4.8) Server Edition

Got it resolved!!!
I found a command-line to disable the Bonjour daemon (mDNSResponder) from both machines:
sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.mDNSResponder.plist
Of course, in doing so, services that utilize the Bonjour protocol, such as network printers, iChat, iTunes, etc., will fail to respond, and might crash.

Similar Messages

Failed to send Email: smtp errors

Since purchasing LR 5.6 earlier this year from B&H, I have been unable to email photos. When attempting to do this, I receive the following error message: Failed to send Email, Cannot establish a secure channel with the outgoing email server smtp-mail.outlook.com. Please provide me with detailed instructions re how I can correct this problem. I am using LR 5.6 to process Nikon D800E raw imaged @files on my Dell laptop computer. Except for this problem, LR works fine for me even if it is at times slow.

Since purchasing LR 5.6 earlier this year from B&H, I have been unable to email photos. When attempting to do this, I receive the following error message: Failed to send Email, Cannot establish a secure channel with the outgoing email server smtp-mail.outlook.com. Please provide me with detailed instructions re how I can correct this problem. I am using LR 5.6 to process Nikon D800E raw imaged @files on my Dell laptop computer. Except for this problem, LR works fine for me even if it is at times slow.

After the update before last (6.0.1 I think) Firefox crashed on resart and failed to send in the error report; I've had to roll back to V4 to use Firefox - any clues?

The update to 6.0, 6.0.1 or 6.0.2 will not run on my system. Th einstall goes ok, the restart starts, throws up a bunch of Java incompatabilities then crashes with the apology screen offering to send in a report if I hit restart or quit. No matter how many times I hit restart, the report submission fails and Firefox stays crashed. Looking at my crash reports, the problem seems to start on or around August 18th 2011 - the crash ID below is the last generated (not found at your end obviously, as it never reached you)

Thanks for the suggestion;
Complete uninstall (Bookmarks saved to X-Marks), re-install, same problem (minus the imcompatible Jave bits & bobs, 'cos they weren't there to be objected to).
So I'm back to V4 (might try hunting down a newer (pre V6) version)

Re: Keep getting "Failed to send email" "Server error" on outgoing emails from phone

I'm having the same issue. I'm using wifi, but it won't send from either yahoo or sbcglobal email. This issue started a few days ago.
Message branched as required by the Verizon Wireless Terms of Service
Message was edited by: Admin Moderator

I have a Galaxy Note 3

Keep getting "Failed to send email" "Server error" on outgoing emails from phone

I think this might have to do with blocking of port 25
How do I fix this?

I can understand how frustrating it is to receive errors when trying to check your email kriley1925. Emails are very important to me and I understand how it is needed for contact with friends and family. Let's work on getting this fixed immediately. What phone do you have? What email accounts are you using? Which email account are you having the issue with? Have you check the incoming and outgoing service settings? Have you had any other issues with your device or email? Please keep us posted and I look forward to hearing from you. ^KH

Error sending emails to Internet: Failed to connect. Winsock error code: 10051

Our exchange 2013 CU2 (CAS+MBX, Win2012) was sending emails to Internet using another server (a kerio email server) and outbound internet email was working as expected.
We have now removed the Kerio server, I also removed the kerio_Send_Connector I was using to send emails to internet and I also changed the email domain in Exchange to be authoritative. I created a new Internet send connector with default values, but the same
bad behavior is present.
Our Exchange 2013 receives emails internally and externally with no problems. The problems are sending emails to Internet. I am suspecting something in the firewall but i need to do some more research.
If from the same Exchange server I telnet to an Internet email host:25 I do get the smtp banner but as soon as I start typing HELO/EHLO I get disconnected and errors are logged.
Errors when sending emails to any emails address (this is from an email sent to google, all others are the same):
Remote Server at aspmx3.googlemail.com (74.125.136.26) returned '400 4.4.7 Message delayed'
7/1/14 9:52:44 a. m. - Remote Server at aspmx3.googlemail.com (74.125.136.26) returned '441 4.4.1 Error encountered while communicating with primary target IP address: "Failed to connect. Winsock error code: 10051, Win32 error code: 10051." Attempted
failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 74.125.136.26:25'
I cannot find any references from such Winsock error that are related to Exchange 2013.
So far all email is being queued at the Exchange Server 2013. I am afraid to install CU3 and make things worse.
Thanks for your comments.

Just check if the receive connector settings are set to fine
check the send connector properties and see whether it is set to use DNS to route emails through external DNS/Internal DNS or smart host .
Do a telnet to external domain like hotmail,yahoo and see at what transaction you are getting an error
Enable verbose logging, restart the transport service and check if you get the same error in the verbose logs as well
Get in touch with the ISP and see if the port 25 for Outbound SMTP is opened.
YOu can check if SMTP Proxy is enabled in the firewall. If so disable the SMTP proxy in the firewall and check.
Good Luck!!
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.
That will encourage me - and others - to take time out to help you.
Regards,
Sathish

Failed to send batch after max errors - Snapshot

I have been replicating happily between 2008 R2 SQL Servers for some time using Transactional replication.
Replication stopped yesterday with the following messages on the source server:
MSSQL_ENG 10054
Communication link failure
MSSQL_ENG 10054
TCP Provider: An existing connection was forcibly closed by the remote host.
MSSQL_ENG Failed to send batch after max errors
MSSQL_ENG Unspecified error
MSSQL_ENG An existing connection was forcibly closed by the remote host.
MSSQL_REPL 0
The process could not bulk copy into table '"pro"."ZZM012X"'.
In the Event Viewer on the target server this message appears:
"A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 10054, output error: 0)."
So this happened after it had been replicating for some time. I get the same error now when I try to restart it or if I rebuild the publication/subscription completely.
There are 7 tables in the publication - 6 of them bulk copy and then replicate without issue. The error is specific to one table. The table has a column in that is varchar(132) and it contains recipe instructions to our manufacturing plant. If
I replicate the table and exclude this field, it doesn't fail. I initially thought it might be spurious characters in the text column but I have removed these and still get the same error. I have set up a test version of the table and publication/subscription
to enable me to test outside of the live environment. Same errors occur.
Does anyone have any clues or pointers to what might be causing it?
Many thanks
Les

Hi - Thanks for the response.
I have tried numerous tests to try to pinpoint the issue but I am still unable to resolve it. The source server is in Connecticut and the target is in the UK. I have successfully bulk copied and replicated the problem table from the source server
to a new database on the same server. I get the same error if I bulk copy and replicate to another server here in the UK. I have backed up and restored the table in a new database on one of the UK servers and can bulk copy and replicate here to
a second UK server. I have traced the issue to one column, varchar (132) on the problem table. If I exclude the column the table will bulk copy and replicate US to UK. I have created new tables and inserted a subset of the data - no change.
We have looked at network issues also: We have switched off the TCP Global Parameters like Chimney offload and NETDMA - on the adapter and in the OS - as these are reported as a potential problems. We have looked at settings in SonicWall and
tried disabling Intrusion Prevention Service, Anti Virus, Application Control and Anti Spyware. Our next option is to look at MTU packet size to see if that is a possible cause.
We are stumped on this one and have had to exclude the table completely from our manufacturing software which is not ideal but at least keeps us working.
Any further ideas, suggestions or solutions would be gratefully received.

What is this error fatal: Write failed: Broken pipe in log of N7K

<186>: 2015 Mar 24 08:29:27 HKT: %DAEMON-2-SYSTEM_MSG: fatal: Write failed: Broken pipe .Client is 75.121.220.251,length of packet causing error 84 84 - sshd[684]
what is this error fatal: Write failed: Broken pipe in log of N7K
i find many brute force guessing login,
what can we do next?
[7m--More--[27m
iled for user root#02# from 222.186.30.115 - sshd[23714]
[7m--More--[27m
2015 Mar 24 07:17:25 xxxx %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication fa
[7m--More--[27m
iled for user root#02##02# from 222.186.30.115 - sshd[23714]
[7m--More--[27m
2015 Mar 24 07:17:28 xxxx %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication fa
[7m--More--[27m
iled for user root from 222.186.30.115 - sshd[23715]
[7m--More--[27m
2015 Mar 24 07:17:28 xxxx %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication fa
[7m--More--[27m
iled for user root#02# from 222.186.30.115 - sshd[23715]
[7m--More--[27m
2015 Mar 24 07:17:28 xxxx %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication fa
[7m--More--[27m
iled for user root#02##02# from 222.186.30.115 - sshd[23715]
[7m--More--[27m
2015 Mar 24 07:17:31 xxxx %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication fa
[7m--More--[27m
iled for user root from 222.186.30.115 - sshd[23717]
[7m--More--[27m
2015 Mar 24 07:17:31 xxxx %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication fa
[7m--More--[27m
iled for user root#02# from 222.186.30.115 - sshd[23717]
[7m--More--[27m
2015 Mar 24 07:17:31 xxxx %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication fa
[7m--More--[27m
iled for user root#02##02# from 222.186.30.115 - sshd[23717]
[7m--More--[27m
2015 Mar 24 07:17:33 xxxx %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication fa
[7m--More--[27m
iled for user root from 222.186.30.115 - sshd[23718]
[7m--More--[27m
2015 Mar 24 07:17:33 xxxx %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication fa
[7m--More--[27m
iled for user root#02# from 222.186.30.115 - sshd[23718]
[7m--More--[27m
2015 Mar 24 07:17:34 xxxx %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication fa
[7m--More--[27m
iled for user root#02##02# from 222.186.30.115 - sshd[23718]
[7m--More--[27m
2015 Mar 24 07:17:36 xxxx %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication fa
[7m--More--[27m
iled for user root from 222.186.30.115 - sshd[23719]
[7m--More--[27m
2015 Mar 24 07:17:36 xxxx %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication fa
[7m--More--[27m
iled for user root#02# from 222.186.30.115 - sshd[23719]
[7m--More--[27m
2015 Mar 24 07:17:36 xxxx %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication fa

Restrict your vty line logins with an access-list to prevent Internet origin login attempts.

RH7 Error: Failed to read from log... Failed to generate WebHelp Pro

Installed RH9 trial on Windows XP PC. Then, generated an existing project using RH7 to a new C: drive directory location on the PC using the same name. Renamed the project files in that C:drive directory to a test name and opened the project's .xpj file in RH9. It converted cleanly.
Now, when I go to generate the RH7 original project from the original server directory, I receive:
Error: Failed to read from log (file name) .log.... Internal error encountered, Failed to generate WebHelp Pro.
Does the log file keep track of the previous generation (time stamp,etc), since this RH7 generation has a skip in it for the one generated to the C:drive? I've compared the log files from each run (.txt files) and don't see a difference. I even copied the log file from the C:drive run to the Server directory. No luck. Any ideas?

Hi John,
Thanks for the prompt response. I am trying to evaluate RH9 / RH Server 9.
When I generate RH7 projects, I’ve always put the server (RH7 Server) directory reference in the ‘Output Folder and Start Page’ field. This directory reference is where the compiled output ends up right? In my case, it’s in that field as:
PBSrobohelp\D$\RoboHelp <file:///
PBSrobohelp\D$\RoboHelp> Web Files\PBS Unit Processes Manual. I’m not aware of a C:Drive local copy of the files. Doesn’t it go out to the server output for the .log file in question?
For the test, I took an existing project in RH7 and replaced this server reference with a C:Drive local hard drive directory reference and ran the output to it. Then I went to the C:Drive directory and changed the project name, because there doesn’t appear to be a way to do a ‘save as’ on a project – RH7 wants to keep that name badly. I then, shutdown RH7 and started RH9. I opened the .xpj file from the new test project copy. It recognized that it was from an older release and it converted the test copy to RH9. It converted cleanly with about 2 inconsequential document warnings but did not create a TOC. I looked it over and saved it in RH9 – it was already my test name.
The original RH7 project opens fine in RH7 and the Test RH9 project opens fine in RH9. So I think I have a good test copy. It’s just that when I point the RH7 original to the Server Output folder (which has its files) it gets the error on generation.
We are evaluating RH Server 9 but I haven’t attempted to publish anything to it yet. I’ve stayed purely on my desktop.
Hope this clears it up.
Jim
Jim Dages
Business Professional Technician III
University of Colorado, Payroll & Benefit Services
1800 Grant St, Suite 400
Denver, CO 80203
t. 303-860-4230
f. 303-860-4299
   Please consider the environment before printing this e-mail.
CONFIDENTIALITY NOTICE - This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain information that is confidential or legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner. Thank you.

RegTask: Failed to send registration request message. Error: 0x80040231

Hi,
i am getting the below error ClientIDManager.log
RegTask: Failed to send registration request message. Error: 0x80040231
RegTask: Failed to send registration request. Error: 0x80040231
Error initializing client registration (0x80040222).
Please let me know how can i solve the error.
Regards,
Boopathi

Checked this ?
http://social.technet.microsoft.com/Forums/systemcenter/en-US/235b795b-442d-4d72-aff0-642d3714ee48/sccm-2007-sp2-mixed-mode-failed-to-send-reqistration-request-message-080040231
Arnav Sharma | Facebook |
Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread.

Failed to send an environment change notification to a log shipping partner node while revalidating the login???

Hi All,
Recently I received the following error message in my SQL instance (Microsoft SQL Server 2012 - 11.0.5532.0 (X64)) :-
23/02/2015 5:09:05 PM
Error: 18456, Severity: 14, State: 51.
Login failed for user 'webapp'. Reason: Failed to send an environment change notification to a log shipping partner node while revalidating the login. [CLIENT: 192.168.82.18]
23/02/2015 5:09:05 PM
Error: 18056, Severity: 20, State: 51.
The client was unable to reuse a session with SPID 98, which had been reset for connection pooling. The failure ID is 51. This error may have been caused by an earlier operation failing. Check the error logs for failed operations immediately before this
error message.
I am using database mirroring instead of log shipping actually but why there's some log shipping related error message coming out? Is it some kind of bug error message? I am just wondering and hope can get some little help about this.
Thanks and highly appreciated.
Best Regards,
Han

Hi Harn,
According to the error message, as my understanding, the issue could be due to that the login 'webapp' has no access to the default database which is configured in log shipping. The database is offline or removed. You could run the command (select * from
msdb.dbo.log_shipping_primary_secondaries) to verify if that database is configured in log shipping. Another cause is that parallel execution occupies multiple worker threads. When you have many parallel executions, the number of available worker threads might
run out and you fail to login. Please help to post complete SQL Server error log for analysis.
To work around the issue, you could follow the two solutions below.
1.Change the default database for the login 'webapp' according to the following article:
https://msdn.microsoft.com/en-us/library/ms189828.aspx
2.Reduce the 'max degree of parallelism' as the following example.
exec sp_configure 'max degree of parallelism', 4;
GO
RECONFIGURE WITH OVERRIDE;
GO
Regards,
Michelle Li

Failed to send request/response to peer. send() failed with error code 32?

hello, chris:
recently we check the tterros.log, we found the following erros:
2009-11-12 09:48:18.41 Err : REP: 893538: OCEDATA:transmitter.c(5762): TT16059: Failed to send request/response to peer. send() failed with error code 32
2009-11-12 09:48:18.41 Err : REP: 893538: OCEDATA:transmitter.c(3048): TT16121: Failed to flush transaction queue. Restarting log read loop
2009-11-12 12:08:14.19 Err : REP: 893538: OCEDATA:transmitter.c(5762): TT16059: Failed to send request/response to peer. send() failed with error code 32
2009-11-12 12:08:14.19 Err : REP: 893538: OCEDATA:transmitter.c(3048): TT16121: Failed to flush transaction queue. Restarting log read loop
what does these mean?? Does this have any effect on replication?? thank you ...

These messages indicate a loss of connectivity between the replication agents. This could be due to one some kind of failure (e.g. network issue). If the messages are infrequent and replication is otherwise working okay they are not a big cause for concern though if I were you I would check the network etc. for anything abnormal.
Chris

Failed to roll HTTP log file Error at Startup WL 8.1

Hi people, i´m having the following error on the Weblogic 8.1 console at startup , the applications works fine but i´m always having this:
####<Oct 19, 2004 6:44:12 PM CDT> <Error> <HTTP> <computerName> <portalServer> <ExecuteThread: '11' for queue: 'default'> <<WLS Kernel>> <> <BEA-101242> <Failed to roll HTTP log file for the Web server: portalServer.
java.io.IOException: Failed to rename log file on attempt to rotate logs
     at weblogic.servlet.logging.LogManagerHttp.rotateLog(LogManagerHttp.java:200)
     at weblogic.servlet.logging.LogManagerHttp.keepStatsAndRollIfNecessary(LogManagerHttp.java:349)
     at weblogic.servlet.logging.LogManagerHttp.log(LogManagerHttp.java:391)
     at weblogic.servlet.internal.HttpServer.log(HttpServer.java:1137)
     at weblogic.servlet.internal.ServletResponseImpl.send(ServletResponseImpl.java:1192)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2590)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
>
Does anyone know what do i need to do in order to solve this problem??
thanks a lot
Guillermo De La Rosa

I'm having the same error message. I also noticed that the server is running a bit slower and that beasvc.exe is using more memory that usual.Has anyone logged a technical support case??
Thanks.
####<Sep 20, 2005 10:15:28 AM EDT> <Info> <HTTP> <ddca2401> <myserver> <ExecuteThread: '44' for queue: 'weblogic.kernel.Default'> <<anonymous>> <> <BEA-101047> <[ServletContext(id=17209502,name=apps,context-path=/apps)] /*: Using standard I/O>
####<Sep 20, 2005 10:15:28 AM EDT> <Error> <HTTP> <ddca2401> <myserver> <ExecuteThread: '44' for queue: 'weblogic.kernel.Default'> <<WLS Kernel>> <> <BEA-101242> <Failed to roll HTTP log file for the Web server: myserver.
java.io.IOException: Failed to rename log file on attempt to rotate logs
     at weblogic.servlet.logging.LogManagerHttp.rotateLog(LogManagerHttp.java:200)
     at weblogic.servlet.logging.LogManagerHttp.keepStatsAndRollIfNecessary(LogManagerHttp.java:349)
     at weblogic.servlet.logging.LogManagerHttp.log(LogManagerHttp.java:388)
     at weblogic.servlet.internal.HttpServer.log(HttpServer.java:1153)
     at weblogic.servlet.internal.ServletResponseImpl.send(ServletResponseImpl.java:1197)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2574)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)

Send and Recieve Error code " Receiving reported error (0x80004005): The operation failed"

This is what is happening after installing 2010 on to a computer that was running 2007 Outlook. Currently using Office 365 so everything is on the cloud but when the user sends one or two emails the error on the bottom of outlook says send and receive
error. Then a pop up dialog box comes up with the following error
Receiving reported error (0x80004005): The operation failed
Does anyone know how to fix this
Nexusxox

Hi,
Glad to know that you have found the solution.
Thanks for your generous sharing. Have a nice day : )
Thanks
Mavis
Mavis Huang
TechNet Community Support

Fatal Error Acrobat failed to send a DDE command

Hello all. I have a fillable form I developed using word 2010. I am trying to convert it to a PDF form. I open acrobat and select star from wizard from the Forms menu. I browse to find the word document and open it. I save the PDF document and everything looks good. I get a progress bar that says "Please wait, reading Adobe PDF". This is very slow progress and then I get the Fatal Error message "Acrobat Failed to send a DDE command". I click ok and the progress bar continues still very slowly. I get the same message again. I click ok and the progress bar continues. The progress bar gets to the end and just stays there. Nothing happens. I waited for an hour and then cancelled it. When clicked cancel, the PDF document opens with my form but without any fillable fields or drop down menus. I tried to do it again a few times and I get the same error message. I am using Adobe Acrobat 9 pro version 9.4.2. Thank you in advance for your help.
Gonzalo

AA 9 will not work for anything but the print function from WORD 2010. The only version of Acrobat that is compatible with OFFICE 2010 for PDF Maker is AA X. Thus, open WORD and print to the Adobe PDF printer. Then open the pdf in Acrobat. Go to FORMS>Add or Edit fields. Since you have no fields at present, Acrobat will ask if you would like to detect form fields. Answer yes and you will get a first cut at the form fields. Yes, you will likely have to add some more and change the ones that Acrobat estimates, but you are on your way.
The other two options you have is to go back to WORD 2007 or earlier or upgrade to AA X (or find someone with AA X and WORD 2010). These methods are pretty much your options with the software combination that you have.

"mDNSPlatformSendUDP sendto failed to send packet" Log Error

Similar Messages

Maybe you are looking for