ME59N ...Auto PO from PR issue

Hi,
I have two purchase req with two different vendors say vendor x and vendor y.when i run auto Po ME59N n the po is created it is a single PO with vendor X covering itmes of PR 1 and PR 2.Why is two POs not created since in PR both PR are having differnt fixed vendor i.e x and y.
Vicky..

You need to check few things
- did your source list is fixed to one vendor, if it is please remove
- do you have quota arragnement created for this two vendor. If quota arra is created than it will generate the PO based on that
-when you run the ME59N - make sure you have check the check box of Per requisition otherwise it will combine into one PO.

Similar Messages

  • Bridge auto expands from one monitor to two when accessing folders

    When I try to rename a folder Bridge auto expands from one monitor to two monitors and doesn't let me change the name. If I try to delete a photo it auto expands, lets me delete the photo but remains expanded across two monitors. This is a new experience I have had Bridge CC for about a year and this activity started on Friday. How do I prevent Bridge from automatically expanding across the two monitors?

    A lot more information about your hardware and software is needed.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    a screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Auto switch from LAN to WIFI

    I am looking for some software or a way to auto switch from LAN to WiFI if there no internet connection.
    This history of this is we have a XP machine that runs a process and its just left on for this and nothing else, with no keyb or mouse connected and we just remote to it if needed.  Our internet connection has issues and quite often drops out, but local
    LAN obviously stays up, we have a WiFi connection to another site opposite that is ok, question is does anyone know any software that will for example ping a external host every so often and if there is no response will auto switch from LAN to WiFi connection
    automatic.
    Thanks. 

    Please see: 
    What is wireless AutoSwitch?
    Carey Frisch

  • How to take Auto backup from External Network Drive to Mac pro internal Dri

    Hi,
    I have a External Network Drive (Buffalo 1TB) which i use as a server, now i need to take auto backup from that external drive to the Mac i am working on, which has 2TB Internal hard Disk.
    Please could anyone help me on this.....
    Thanks in advance

    If you are looking to actually integrate what you have on the external one terabyte hard drive with the 2 TB hard drive you're using inside the Mac the best move for you if you want access to that data when using the Mac Pro server is going into utilities click on the top bar where it says go fall that down to the utilities told them that folder quickly once you are there you will see migration assistant click on that you will be asked to type your admin password to that. It will ask you "how do you want to transfer your information" then select from a Time machine backup or other disk when it asks you will be transferring information to your Mac Pro from your 1 Tb backup external hard drive once it's finished eject the drive or reformat it and use it again if your objective was to infect keep compress the data on the external so you have more space but do not have access to it I strongly recommend Carbon Copy Clone 3.3.1 is 100% free and does a fantastic job here is the link http://www.pure-mac.com/downloads/carboncopyclonerdl.html of copying every block to create an exact replica of your source hard drive. If you want something different and don't mind paying SuperDuper! is a great product as well this WebSite will have many options I would stick to carbon copy clone http://www.pure-mac.com/backup.html I also like EMC Retrospect backup and recovery software for the Mac it is a great product but very much on the expensive side for backup utilities although if you need word offers this might be right up your alley.
    I hope I wasn't help,
    Sincerely,
    Thomas

  • HP Laserjet P4014dn won't auto print from tray 1

    HP Laserjet P4014dn stopped auto printing from tray 1. Can't manually print from there either. Now it always pulls from tray 2 (bottom tray) even if paper is loaded in tray 1. Auto print is selected in software setting. SN [Personal Information Removed] CB512A. Help!

    There may be a couple of reasons why the printer will not auto print from Tray 1.
    The following references the User Guide for the printer which you can obtain from here:
    http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01295101/c01295101.pdf
    Page 18 of the User Guide has the section "Paper Handling Menu".
    This section defines the menu items that can be used to set Size and Type for Tray 1.
    Page 85 of the User Guide has the start of the Configure Trays Section.
    In this section there are two notes.  If Tray 1 is set to ANY SIZE and ANY TYPE, the printer will pull from that tray whenever media is loaded in that Tray.  If Tray 1 is set to a specific size, it will act like a Cassette.  This means that it will follow the paper handling model of Trays 2, 3, etc..
    Example:  Tray 1 is set to Letter, Tray 2 is set to Letter.  When a job is sent from the PC requesting Letter and the Sources is Auto, the printer FW will look for the highest number tray that has letter installed and pull from that tray.  Thus, Tray 2 will always be used unless Tray 2 doesn't have paper.
    Page 86 has the section "Configure a tray by using the Paper Handling menu".
    Follow the steps in this section to validate that Tray 1 is set to ANY SIZE and ANY TYPE.  If not set to ANY SIZE, ANY TYPE then change the setting to be ANY SIZE and ANY TYPE.  You may have to scroll through the list of sizes and types to find what you are looking for.
    Once possibility is that the printer is not detecting that paper is loaded in Tray 1.  One method to verify this is to remove all paper from Tray 2 and lower trays if there are more than just Tray 2 installed. This will force the printer to pull paper from Tray 1 if paper is present.  If paper is present and the Tray 1 menu items are set to ANY SIZE and ANY TYPE and the printer prompts for you to load Tray 1 with paper, it is possible that the printer is not detecting that paper is in the tray.
    In this case, I would recommend you contact HP Support as the media presence sensor may no longer be working properly.
    Kazman
    I am an HP Employee
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Do the latest iMacs (new slim version) still support auto-switching from 220V to 110V?

    do the latest iMacs (new slim version) still support auto-switching from 220V to 110V?

    Yes. Apple power supplies work with voltages between 110 and 240 v.
    Allan

  • How do I stop iMovie 11 auto importing from external HD?

    Okay, I'm going crazy. I, the intrepid Googler, have so far been unable to find the answer to this question. Please somebody help me!
    I have hundreds of video clips stored on an external hard drive. However, when I crank it up, iMovie exceptionally irritatingly starts auto-importing every single clip back onto my MacBook's hard drive. No! No! NOOOO! That's NOT what I want! Stop it! Stop it! Stop it! I only want to import ONE video of MY choice at a time to edit and then save it back to the external drive, I don't have enough ROOM for ALL of them on the internal drive, you crazy machine!!!!
    So. I go into iMovie preferences, where I'd expect to see an option for turning off auto import. Nope. I cannot see anything there. Do I have menu blindness? Am I losing my mind?
    Then I Google 'how to stop iMovie 11 from auto-importing from external hard drive and find nothing. Am I alone in this? Surely not. Am I being a dunce? Possibly.
    Advice, anyone?

    Okay. Please ignore the above. I was being a dunce. Today, it appears not to be doing it any more. Bizarre. LOL!

  • Yoga 2 Pro - Wake From Sleep Issue

    Hey Guys,
    Just recently purchased a Y2P (i7 256gb) less than a week ago. The issue i am currently experiencing is when i wake the laptop from sleep, usually at least 15 mins of sleep, the laptop will come up but then the system is considerably laggy/slow & then becomes completely unresponsive so much to the point that it seems as if it freezes. I am not able to move the mouse (trackpad & usb mouse) & the keyboard buttons do not work/register anymore. Pressing the power button does not put the laptop back to sleep but i can still see everything on the screen from where i left off before closing the lid & the laptop goes into sleep mode. Only way i can recover from this issue is to do a hard reset by holding the power button until the machine powers off & then to boot it back up.
    Also, i have updated the BIOS & did all the windows updates from a clean install of Windows 8.1 (different from a factory reset) in order to avoid the Superfish vulnerability. All the drivers have been installed as well (confirmed by the Device Manager).
    Any other people experiencing the same problem & have any potential fix for this issue? Any help on this matter would be much appreciated.
    Solved!
    Go to Solution.

    You can try this -
    Go to Control Panel >> Power Options >> Change Plan Settings (For active plan)
    Click on Change Advanced Power settings
    Under Sleep option, Change the Hybrid Sleep option (to the opposite of whatever is set right now for both On Battery and Plugged In)
    Also, not sure if fastboot is enabled on your laptop but you can try disabling it. Google "Disable fastboot in win 8.1" and you will get the results.
    Let me know if any of those helped you.
    Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
    When your plans fail, your Real Story begins!!

  • HT201359 I had cancelled a auto withdrawal from a app I purchased months ago. The app is smule sing. I cancelled  the VIP on December 26,2013. Auto renewal was on 12/27/2013. On 1/7/2014 apple charged my account for this. How do I get my money back

    I had cancelled a auto withdrawal from a app I purchased months ago. The app is smule sing. I cancelled  the VIP on December 26,2013. Auto renewal was on 12/27/2013. On 1/7/2014 apple charged my account for this. How do I get my money back

    Use the Report a Problem link in the emailed receipt.

  • HT4628 How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)?  There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

    How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)?  There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

    How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)?  There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

  • Waking from sleep issues

    Hi, I have a 17" G-5 i-sight imac, running os 10.4.8, and have been having wake from sleep issues similar to what others have posted. These first showed up in late August. About 25 % of the time, when waking the computer from sleep the screen remains black, and after about 10 seconds the fan starts running at full speed, The only way to stop this is to hold in the power key until the computer shuts down, and then restart. What's interesting is that this only seems to happen using my apple wireless keyboard and mouse; when using a usb keyboard and mouse there is no problem. Could this be a bluetooth-related problem? The bluetooth settings are all correct (allow bluetooth device to wake computer, etc). The apple care guy basically said he didn't know how to help me, and it's driving me crazy! The only wired keyboard/mouse I have is from my 233 bondi blue imac, so just using that to avoid the problem is not a good option. Please help!
    Jerry

    If your Mac happily goes to sleep but won't wake up--Hold down the power switch to force-reboot your machine and get it running again.
    Don't worry-your Mac isn't narcoleptic. Its Open Firmware system or NVRAM (nonvolatile RAM) is likely corrupt, and your Mac can't remember how to wake up.
    Restart your Mac and immediately hold down the Command-Option-O-F key combo until you see a somewhat intimidating command-line display that ends with the Open Fimware prompt. Type the following line:
    reset-nvram
    press the return key on your keyboard
    set-defaults
    press return
    reset-all
    press return
    Your Mac will reboot. Once it's running, put it back to sleep to test. If the problem recurs your Energy Saver preferences may be the culprit. Delete the com.apple.PowerManagement.plist file (go to Finder/Hard drive/Library/Preferences/SystemConfiguration)--don't worry, your Mac will regenerate a new one--and then restart to see if that rights the wrong.
    Still didn't work? Might be time to call AppleCare or see an Apple Genius or a technician.
    Cheers!
    DALE

  • Auto GR from Inbound Delivery

    Hi Alll...
    1. Is ther any std config or Master data checks involed for creating an Auto GR from Inbound Delviery ??
    2. Thru ASN i am going to get an Inbound Delivery Created & need an Auto GR for one scenarion & other it shd not create an Auto GR. Basically we need this since we recieve goods from two differenet Locations ( One Location very close by and other Location quite far)
    Thanks
    Balaji

    Please use BAPI_GOODSMOVT_CREATE for your requirement.That should allow you to differentiate between what you need a GR against and what not..

  • How to make a redirect without auto-redirect from the portlet "edit" mode?

    How to make a redirect without auto-redirect from the portlet "edit" mode?
    I use some sofisticated customizing with server-side validation of the form data. I want to redirect to the page of the portlet "show" mode and to the "edit" mode depending on the validation results. How can I do it?

    Heay.....this worked for me.
    I am able to change the mode programatically from edit to show.
    HttpPortletRendererUtil.handleEditAction(portletRenderRequest,"OK");
    I removed Apply , OK and Cancel buttons and applied my own Submit and Back button in Personalize mode and then change the mode to show on click of Back button using the above mentioned statement.
    Thanks
    ~Neeraj Sidhaye
    Try_Catch_Finally @ Y !
    ExtremePortal @ Gmail　Ｄｏｔ　Ｃｏｍ

  • Problem: Socket connection is not creating in machine, through utility program (MFC Dll), on ListDisplay service port - 3334 (on separate machine), while we are able to telnet on same ListDisplay service port - 3334 from same issue machine on same time

    Problem: Socket
    connection is not creating in machine, through utility program (MFC Dll), on ListDisplay service port - 3334 (on separate machine), while we are able to telnet on same ListDisplay service port - 3334 from same issue machine on same time
    Environment: -
    OS:
    Windows XP SP2/7
    Code:
    VC 6.0
    Dll: MFC
    Problem Description: -
    We have written a utility program which create socket (Using windows standard method [MFC]), and then make connection with another service (List Display) running
    on port 3334 in different machine and retrieve the required list data. This program was working fine in almost all the machines.
    But, we have received a severe intermittent issue on two machines. Client is facing issue in displaying the list data from port 3334.
    Attempt: -
    First we tried to debug code, and we come to know that socket is not creating in utility program. So we tried to telnet on ListDisplay service port 3334 and we were surprised that we were able to telnet, then we opened some more
    telnet window on same port 3334 around (6 to 8) window, and each cmd connected properly. But we were not able to create socket from utility program.
    Problem is severe because issue is intermittent.
    We have tried all the way, but we are not able to figure it out, that what can be the exact problem and what are the conditions, when utility program will not
    connect with ListDisplay service on port 3334.
    Kindly assist to resolve this issue. For any help, we would be really thankful.

    Hi,
    According to your description, it seems that you have created an utility program which is making connection with another service port 3334, however, two clients are facing issue in display the data list from port 3334.
    Port: 3334/TCP
    3334/TCP - Known port assignments (1 record found)
    Service
    Details
    Source
    directv-web
    Direct TV Webcasting
    IANA
    Since the port 3334 is used by directv-web service, I'd like to suggest check this service it is working well on the problematic clients.
    1. The client can be resolved in DNS well? Please run "nslookup" in the prompt command.
    2. Is there any 3rd party application interrupting? Do test in clean boot.
    2. Strongly suggest you run process monitor tool to analysis it.
    I am looking forward to your reply if you have any updated on your side.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Budget control in project WBS'e  while creating the auto PR from Sale order

    Hi experts,
    we are creating the auto pr from sales order for trading process with budget wbs element. but commitment is not posted in project wbs were as pr is created through sale order
    pls suggest if any additional setting is required  to post commitment while creating auto pr from sale order.
    rgds
    rajesh

    Check account assignement categories in SD for PR creation and See if you can make PR to be created with WBS as account assignement like we do in OPTT.

Maybe you are looking for