Measurement Computing USB-DIO96H driver issue with Labview 2012 SP1 on Windows 7 x64

Is anyone else having issues with measuremetn Computing's USB-DIO96H driver in Labview 2012 SP1. It throws warnings in Labview when loaded that are unresolvable as you can't save to the DLL driver file. Also it regularily crashes Labview randomly. I am not impressed with their driver. Anyone have any suggestion other than replacing with NI-DAQ solution, which I am working on?

I've taken a look and I don't see any drivers available for that device on ni.com. There are two potential workarounds that would both involve building your own driver:
1. Write a LabVIEW application that calls functions on the DLL you downloaded from Measurements Group
2. Write a LabVIEW application that addresses the device using NI-VISA and serial communication.
Some resources if you choose to go down that path:
http://www.ni.com/devzone/idnet/development.htm
http://www.ni.com/white-paper/3271/en/
http://www.ni.com/white-paper/3009/en/
Hope this helps!
Rob B
FlexRIO Product Manager

Similar Messages

USB External Drive issue with 10.5.7

Just as infos : i have experienced a weird issue regarding my external USB Lacie Drive. It has been recognise by 10.5.7 as a SAMSUNG drive. I use this external drive with time Machine for backup. Everything dispite that seems to work, but can't take the risk as i didn't noticed improvement in my system of Logic with the new OS, i have decide to downgrade.

thank you everybody for your replies, but as i said i went back to 10.5.6 and everything works perfectly here. Yes under USB (system profiler) the drive is well recognise by the system, it's only under 10.5.7 that that drive was listing as a SAMSUNG. Anyway, i will give another try to 10.5.7 in few weeks, as i am in a middle of the projet (CD for a local artist), it might be wise i stay under 10.5.6 as it works well on my system.
PS (as i said earlier the drive was working well under 10.5.7 but just listed as a Samsung drive). I am not be the only one ?

USB flash drive issue with photoshop.

For some reason when i try to save .psd files from photoshop CS3 to my usb flash drive I always get The disk is full error, even when the disk is empty. I try to save to the disk, and I can save to the desktop but cannot drag and drop it in. It's a 1 gig flash drive.

Hi Skwertz: Have you tried plugging in the USB Flash drive and emptying the trash? Just be sure that the items in the trash are really meant to be thrown out.
Good Luck
Stedman

BSOD with labview 2009 sp1 on windows xp on dual core intel computer stop code F4

I have 14 test stations with the Labview runtime engine installed. These stations run 24 hours a day, or are supposed to, Every week, on average, one of the computers gets a blue screen of death, with a stop code of F4. It seems fairly random which computer it is.
Some other details:
Labview version 2009 sp1, and visa 5.02 installed
The computers are brand new Intel D510MO computers, with wester digital solid state hard drives. (Fanless)
XP service pack 3.
The computers aren't overheating, The ram is good, to power is stable and filtered.
The computers seem to run fine without ni software installed.
The only other thing installed is a serial port driver for a usb serial port converted.
We've caught one blue screen with no Labview executable running.
I've run a batch to turn off all non-essential Labview services, but it still seems to happen.
I've been working this problem for months. Any ideas?

John@ge wrote:
I have 14 test stations with the Labview runtime engine installed. These stations run 24 hours a day, or are supposed to, Every week, on average, one of the computers gets a blue screen of death, with a stop code of F4. It seems fairly random which computer it is.
Some other details:
We've caught one blue screen with no Labview executable running.
I've run a batch to turn off all non-essential Labview services, but it still seems to happen.
I've been working this problem for months. Any ideas?
If I am reading this correctly you have ruled out your LabVIEW program as the cause and you think it is one of the non-essential services. Which ones are still running?
Have you looked in the Windows error logs?
Edit: I forgot to add the link I was going to give you.
=====================
LabVIEW 2012

Issue with SCCM 2012 SP1 U5 upgrade and client published version

Recently we upgraded our SCCM server to SP1 U5, and our published and available client version is still at 5.00.7804.1000 instead of 5.00.7804.1600. We ran the hotfix to upgrade it and it looked like everything had went through. Does this not also
upgrade the client? It doesn't seem like you can run the hotfix again after you've already installed it once to repair either. Is there another way to update the published version inside the console? We have it as a package right now to deploy to all the systems
but I was hoping we could upgrade the internal one and let it run more automatically. Any advice would be greatly appreciated.

More info:
How to update ConfigMgr clients automatically… in SP1
http://configmgrblog.com/2012/12/03/how-to-update-configmgr-clients-automatically-in-sp1/
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Bug report: on LabVIEW 2011 SP1 and Windows 8 'Open URL in default browser.vi'

Dear colleagues,
Here is a bug report.
Culprit: 'Open URL in default browser.vi'.
System: Windows 8, Professional. LabVIEW 2011 SP1.
Abnormal behaviour and steps to reproduce:
Above mentioned VI doesn't work when LabVIEW was started with administrator privilegies. And it works as expected when LabVIEW running in normal (non-administrator) mode.
Looking forward to see this fixed.
Best regards,
Igor Titov.
CLD.
=========================
Igor Titov, CLA
WebPager - put LabVIEW front panels into the web page
Labicom.net

Hi Igor,
Unfortunately LabVIEW 2011 SP1 does not support Windows 8. I tested this behavior with LabVIEW 2012 SP1 on Windows 8 and everything worked correctly.
Regards,
Jeff Peacock
Product Support Engineer | LabVIEW R&D | National Instruments

How to detect USB Flash Drive name in LabVIEW

Hi there
I was looking for how to detect a USB Flash Drive name in Labview
appearently every time i insert USB Flash Drive in a computer, windows assign it a different name
once "J:" and sometimes "M:"
Is there anyway to obtain USB Flash Drive name programmatically in Labview ?
Because in my program an user shouldn't be able to access HDD Drives except his USB Flash Drive (for inserting some file ...)
thank you and excuse me for my poor english

I was able to get the demo.vi to load, but it could not load the other two because there is no block diagram associated with those. I'm not sure why this is. I haven't had any issues with other llbs before.
Reese, (former CLAD, future CLD)
Some people call me the Space Cowboy!
Some call me the gangster of love.
Some people call me MoReese!
...I'm right here baby, right here, right here, right here at home

DasyLab spurious crashing - Measurement Computing USB Pods ?

Hi Team.
Am running a DasyLab (V12) program which accesses a pair of Measurement Computing USB Pods.
The intention is to run a research lab instrument continuously - 24/7 so to speak.
The system is essentially fine, and can run perfectly for as long as say 24 hours, but then halts with a" Sampling Error " stock message
referring to loss of visibility of one of our USB pods.
We are using a sensible and conservative timebase.
Now I do realise that we may be experiencing inductive interference in our control pathways.
The machine is ultimately a high voltage and high current distributed lab assembly.
We are paying good attention to good engineering practice and managing ground and earth returns as best we can.
The USB pods are quite some distance from the PC but we are using active drive USB cabling certified to the distance ( appx 15 m )
The PC is clean and not overburdened.
Any insight or similar experiences would be welcomed.
Thanks
Jack Sprat

You have provided insufficient information to diagnose a problem.
There is an updated MCC-DRV 12.1 on the Measurement Computing web site.
You should also be running the DASYLab 12.0.1 service pack update.
You should also be running a recent version of instaCal and the Universal Library (V6.23 or later, 6.25 is the current release).
For a 24x7 application, you have to agressively turn off power management. Microsoft does not configure your Windows computer for 24x7 operation.
You have to determine which USB hub your device is connected to (not that easy for the ones that use the HID driver), and disable power management. With the exception of allowing the screen to blank, you should not have any power management enabled... don't let the hard drive sleep, don't let the CPU sleep, and whatever else, don't let Windows put the USB hub to sleep!
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

Measurement computing USB-QUAD08

Hi,
Does anyone out there have any experience with Measurement Computing USB-QUAD08 board? I normally stick with NI DAQ only, but I was looking for a USB DAQ with 8 timer/counter channels and that's the only one I could find.
I'm trying to measure the period of a digital PWM signal. Specifically I want to capture 50-500 consecutive pulse periods into an array (measure period between falling edges) which are 100-10000us in duration.
At any rate, the example from their website (attached) utilizes .net references, which I am not familiar with, does not seem to do what I need.
If anyone out there has worked with this device and would like to modify the attached VI to accomplish what's needed, I would greatly appreciate your help.
-martin
Attachments:
Period Mode Scan Mode_v1.vi ‏33 KB

I don't have any experience with the module you listed, but I do use USB-1208 quite a bit. Have you tried using the labview vi's that come with the device?
Reese, (former CLAD, future CLD)
Some people call me the Space Cowboy!
Some call me the gangster of love.
Some people call me MoReese!
...I'm right here baby, right here, right here, right here at home

On windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

on windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?

No. You have no alternative but to plug it into a computer running iTunes and restore it.

Install HID driver directly with labview

Hello,
it's possible to install a .inf driver directly with labview?
I would like to install a personal driver to a HID device that Windows set like a generic Human Interface.
Do you have an example cose? It's possible?

This is not something an application should or could do. Especially in modern OSes. You need a specific installer that does all the right things in terms of installing the inf file. And this installer needs to run with administrative rights in all Windows versions and with elevated privileges in Vista and higher. you don't want your user to have to enter the admin password dialog each time something like this happens.
Instead you need to have an installer that does all this. LabVIEW is NOT the program of choice to write installers. I never would do this and so would most others, so if you want to go that route you likely will have to implement it yourself.
You can include the driver installer as a post installation process to your LabVIEW application installer.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Req any examples of how to use a USB midi controller/keyboards with Labview TIA

Req any examples of how to use a USB midi controller/keyboards with Labview TIA

Hi,
To access the MIDI ports you will need to call the Windows SDK. To send MIDI commands is relatively easy, here is an example that shows you how to send data to a MIDI controller or keyboard.
As far as input goes, this is the hard part. There are a series of functions that you need to call to open up the device, set some buffers and and possibly a callback to get notifications on the incoming data.
Reading MIDI data will not be an easy task, your best bet will be to implement this in a DLL and call that DLL in LabVIEW, there should be some code available o the web.
= "http://msdn.microsoft.com/library/default.asp?url=/library/en-us/multimed/htm/_win32_multimedia_... is a link to the Windows multimedia functions that you could use for MIDI input.
Let me know if you have any further questions.
Regards,
Juan Carlos
N.I.

I had a Microsoft tech access my computer remotely to resolve issues with my hotmail acct. There were files that needed to be deleted and he also changed some settings. Later, when I tried to open InDesign I received the following error: AMT Subsystem

I had a Microsoft tech access my computer remotely to resolve issues with my hotmail acct. There were files that needed to be deleted and he also changed some settings.
Later, when I tried to open InDesign I received the following error:
AMT Subsystem Failure
The licensing subsystem has failed catastrophically. You must reinstall or call customer support.
I rebooted the computer and tried again:
Licensing for this product has stopped working.
You cannot use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contacting your IT administrator or Adobe customer support for help.
I can access Acrobat and MS Office programs, it's just the CS3 programs that I can't access. Can I uninstall and then reinstall CS3 without an access (un-lock) code?

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Has anyone else been having hard drive issues with 13" MacBook Pro barely a year old?

Has anyone else been having hard drive issues with 13" MacBook Pro barely a year old?

Yes, BUT...
... there are many problems that are really easy to eliminate by replacing the Hard drive, including ones that have nothing to do with actual Drive Hardware failure. These include corrupted install of Mac OS X, its EFI partition, clobbered partition tables, or the appearance of Bad Blocks in a critical area.
Any of these problems can sometimes be eliminated by re-initializing the entire drive and writing Zeroes, and re-installing from scratch. The trouble is, this process takes hours to complete, and is not guaranteed to be successful -- you may still need a new drive after all that effort.
I learned from my Plumber that consumers have no appetite for solutions that might work, and detest return visits for any related problems whatsoever. You or your friend may have had your drive replaced, not because it actually failed, but because the situation was troublesome, and the provider thought you would not tolerate anything less than a crisp, complete fix on the first attempt. And based on the cost of technician time, it may have even been cheaper that way.

Audio driver issue with my HP Compaq DC7800 Convertible Minitower

Hello,
I am having an Audio driver issue with my HP Compaq DC7800 Convertible Minitower desktop PC.
A few days ago I have formatted my desktop PC and installed a new Windows XP Service pack 3. As I needed driver for my device I have managed to find all drivers except the one for my audio device. As I saw I have integrated audio on my motherboard, but drivers that I have found on a support site of HP (drivers download) none of them work and there are too many (I have also needed to download drivers for other devices form intel site but this is another issue). So, now I was hoping that someone can help me to find (finally) and install audio device so I can finish with installation process. I would be veeeeeerrrry thankful for that Thanks in advance.
This question was solved.
View Solution.

It does not matter . I have found the driver that I needed: ADI High-Definition (HD) Audio Driver - Sound Max
thx anyway

Measurement Computing USB-DIO96H driver issue with Labview 2012 SP1 on Windows 7 x64

Similar Messages

Maybe you are looking for