Measurement Doc creation and Transfer: Difference field is the basis for measurement reading, why?
Hello All
I have transfer supported measuring points. Whenever I create a measurement document for a measuring point, the measurement values are transferred to all its subsequest measuring points havin transfer supported check. The target measurement points gets readings from source measuing point and source document and creats a new document for this measuring point, . The measurement reading is calculated by adding the difference (as per the difference in the source document) to the last counter reading and creates the new Total reading. Can some one xplain why the system adds the difference value and calculate a total reading.
This approach leads to discrepancy between Source and Target measurment document reading as the reading of both the source and target can be different on same time stamp and also I observed that the Target reading can be greater than the Source reading which can never be true or logically exceptable.
How can we solve this? Is this right and standard approach.Please provide your views and solutions.
Regards
Murad.
Hi Murad Ahmed,
Examine these 2 cases.
Case1
A Measuring point (Counter) created for recording Distance Traveled by a Car.
Case2
A measuring point (again a Counter), used to record the Fuel consumption in the Car.
In Case1, you have a meter fitted in the Car itself, which gives the Total Distance traveled. This reading you record in the Counter Reading in IK12. The Difference field is automatically updated.
In Case2, you read the amount of Fuel filled in the Car, from the Meter at the Gas Station, This reading you should record in the Difference Reading in IK12. Then the Counter Reading is automatically updated.
I hope you understand, in Case1, you can not know the Difference and in Case2 You can not have the Total readings.
About other doubts regarding Transfer of Measuring points, hope all the Measuring point invovled in the process have the same characteristics used.
The following document might be able to help you further.
Measurement Reading Transfer – A useful functionality
Jogeswara Rao K
Similar Messages
-
T-codes for accrual doc creation and posting
Hi,
Anyone knows the T-codes for accrual doc creation and posting?
Thanks,
CWHi,
Try with T Codes:
FBS1 - Enter Accrual/Deferral Document
F.81 - Reverse Accrual/Deferral Document
Thanks
Chandra -
A cmr-field and a cmp-field on the bean are using the same name. The names
Hi:
I am using weblogic 8.1 and MyEclipse 5.1.1. I am deploying my ear application through MyEclipse 5.1.1 as an ear file.
When I ran the following EJB QL:
SELECT OBJECT(p) FROM Product p.category = ?1
I get the following error:
n relation Category-Product, a cmr-field and a cmp-field on the bean are using the same name. The names of cmr and cmp fields must be unique.
It is basically complaining that I have a field
<cmr-field>
<cmr-field-name>category</cmr-field-name>
</cmr-field>
in my ejb-jar.xml and also the same category in the
<cmp-field><field-name>category</field-name></cmp-field>
field. The problem is that if I changed the value of the cmr-field, I have to add a get and set in my productLocal.java and when you do that you have to do the same in the ejb-jar.xml.
Here is my ejb-jar.xml:
<?xml version="1.0"?>
<!DOCTYPE ejb-jar PUBLIC
"-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN"
"http://java.sun.com/dtd/ejb-jar_2_0.dtd">
<ejb-jar>
<enterprise-beans>
<entity>
<ejb-name>CategoryEJB</ejb-name>
<local-home>com.CategoryHomeLocal</local-home>
<local>com.CategoryLocal</local>
<ejb-class>com.CategoryBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.Integer</prim-key-class>
<reentrant>False</reentrant>
<cmp-version>2.x</cmp-version>
<abstract-schema-name>Category</abstract-schema-name>
<cmp-field><field-name>categoryId</field-name></cmp-field>
<cmp-field><field-name>categoryName</field-name></cmp-field>
<cmp-field><field-name>picture</field-name></cmp-field>
<cmp-field><field-name>pictureWidth</field-name></cmp-field>
<cmp-field><field-name>pictureHeight</field-name></cmp-field>
<cmp-field><field-name>labelOn</field-name></cmp-field>
<cmp-field><field-name>labelOff</field-name></cmp-field>
<cmp-field><field-name>button</field-name></cmp-field>
<primkey-field>categoryId</primkey-field>
<security-identity><use-caller-identity/></security-identity>
<query>
<query-method>
<method-name>findCategory</method-name>
<method-params></method-params>
</query-method>
<ejb-ql>
SELECT OBJECT(c) FROM Category c
</ejb-ql>
</query>
</entity>
<entity>
<ejb-name>ProductEJB</ejb-name>
<local-home>com.ProductHomeLocal</local-home>
<local>com.ProductLocal</local>
<ejb-class>com.ProductBean</ejb-class>
<persistence-type>Container</persistence-type>
<prim-key-class>java.lang.Integer</prim-key-class>
<reentrant>False</reentrant>
<cmp-version>2.x</cmp-version>
<abstract-schema-name>Product</abstract-schema-name>
<cmp-field><field-name>productId</field-name></cmp-field>
<cmp-field><field-name>brandName</field-name></cmp-field>
<cmp-field><field-name>productDescription</field-name></cmp-field>
<cmp-field><field-name>purchasePrice</field-name></cmp-field>
<cmp-field><field-name>category</field-name></cmp-field>
<primkey-field>productId</primkey-field>
<security-identity><use-caller-identity/></security-identity>
<query>
<query-method>
<method-name>findProduct</method-name>
<method-params>
<method-param>com.CategoryLocal</method-param>
</method-params>
</query-method>
<ejb-ql>
SELECT OBJECT(p) FROM Product p.category = ?1
</ejb-ql>
</query>
</entity>
</enterprise-beans>
<relationships>
<ejb-relation>
<ejb-relation-name>Category-Product</ejb-relation-name>
<ejb-relationship-role>
<ejb-relationship-role-name>
Category-has-many-Product-numbers
</ejb-relationship-role-name>
<multiplicity>one</multiplicity>
<relationship-role-source>
<ejb-name>CategoryEJB</ejb-name>
</relationship-role-source>
<cmr-field>
<cmr-field-name>productNumbers</cmr-field-name>
<cmr-field-type>java.util.Collection</cmr-field-type>
</cmr-field>
</ejb-relationship-role>
<ejb-relationship-role>
<ejb-relationship-role-name>
Product-belongs-to-Category
</ejb-relationship-role-name>
<multiplicity>many</multiplicity>
<cascade-delete/>
<relationship-role-source>
<ejb-name>ProductEJB</ejb-name>
</relationship-role-source>
<cmr-field>
<cmr-field-name>category</cmr-field-name>
</cmr-field>
</ejb-relationship-role>
</ejb-relation>
</relationships>
<assembly-descriptor>
<security-role>
<role-name>Employees</role-name>
</security-role>
<method-permission>
<role-name>Employees</role-name>
<method>
<ejb-name>CategoryEJB</ejb-name>
<method-name>*</method-name>
</method>
</method-permission>
<container-transaction>
<method>
<ejb-name>CategoryEJB</ejb-name>
<method-name>*</method-name>
</method>
<method>
<ejb-name>ProductEJB</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
Here is my weblogic-cmp-rdbms-jar.xml:
<!DOCTYPE weblogic-rdbms-jar PUBLIC
'-//BEA Systems, Inc.//DTD WebLogic 8.1.0 EJB RDBMS Persistence//EN'
'http://www.bea.com/servers/wls810/dtd/weblogic-rdbms20-persistence-810.dtd'>
<weblogic-rdbms-jar>
<weblogic-rdbms-bean>
<ejb-name>CategoryEJB</ejb-name>
<data-source-name>ShoeStore</data-source-name>
<table-map>
<table-name>category</table-name>
<field-map>
<cmp-field>categoryId</cmp-field>
<dbms-column>categoryID</dbms-column>
</field-map>
<field-map>
<cmp-field>categoryName</cmp-field>
<dbms-column>categoryName</dbms-column>
</field-map>
<field-map>
<cmp-field>picture</cmp-field>
<dbms-column>Picture</dbms-column>
</field-map>
<field-map>
<cmp-field>pictureWidth</cmp-field>
<dbms-column>PictureWidth</dbms-column>
</field-map>
<field-map>
<cmp-field>pictureHeight</cmp-field>
<dbms-column>PictureHeight</dbms-column>
</field-map>
<field-map>
<cmp-field>labelOn</cmp-field>
<dbms-column>LabelOn</dbms-column>
</field-map>
<field-map>
<cmp-field>labelOff</cmp-field>
<dbms-column>LabelOff</dbms-column>
</field-map>
<field-map>
<cmp-field>button</cmp-field>
<dbms-column>Button</dbms-column>
</field-map>
</table-map>
<automatic-key-generation>
<generator-type>SQL_SERVER</generator-type>
</automatic-key-generation>
</weblogic-rdbms-bean>
<weblogic-rdbms-bean>
<ejb-name>ProductEJB</ejb-name>
<data-source-name>ShoeStore</data-source-name>
<table-map>
<table-name>PRODUCT</table-name>
<field-map>
<cmp-field>productId</cmp-field>
<dbms-column>productId</dbms-column>
</field-map>
<field-map>
<cmp-field>brandName</cmp-field>
<dbms-column>brandName</dbms-column>
</field-map>
<field-map>
<cmp-field>productDescription</cmp-field>
<dbms-column>productDescription</dbms-column>
</field-map>
<field-map>
<cmp-field>purchasePrice</cmp-field>
<dbms-column>purchasePrice</dbms-column>
</field-map>
<field-map>
<cmp-field>category</cmp-field>
<dbms-column>categoryId</dbms-column>
</field-map>
</table-map>
<!-- Automatically generate the value of ID in the database on inserts using sequence table -->
<automatic-key-generation>
<generator-type>SQL_SERVER</generator-type>
</automatic-key-generation>
</weblogic-rdbms-bean>
<weblogic-rdbms-relation>
<relation-name>Category-Product</relation-name>
<weblogic-relationship-role>
<relationship-role-name>Product-belongs-to-Category</relationship-role-name>
<relationship-role-map>
<column-map>
<foreign-key-column>categoryId</foreign-key-column>
<key-column>categoryID</key-column>
</column-map>
</relationship-role-map>
</weblogic-relationship-role>
</weblogic-rdbms-relation>
</weblogic-rdbms-jar>
Here is my productLocal.java:
package com;
import javax.ejb.CreateException;
import javax.naming.NamingException;
import java.util.Date;
import java.util.Vector;
import java.util.Collection;
public interface ProductLocal extends javax.ejb.EJBLocalObject
public Integer getProductId();
public void setProductId(Integer productId);
public String getBrandName();
public void setBrandName(String brandName);
public String getProductDescription();
public void setProductDescription(String productDescription);
public Double getPurchasePrice();
public void setPurchasePrice(Double purchasePrice);
public CategoryLocal getCategory();
public void setCategory(CategoryLocal category);
Here is my ProductBean.java:
package com;
import javax.naming.InitialContext;
import javax.ejb.EntityContext;
import javax.ejb.CreateException;
import javax.naming.NamingException;
import java.util.Date;
import java.util.Collection;
import java.util.Iterator;
import java.util.Vector;
import java.lang.Integer;
public abstract class ProductBean implements javax.ejb.EntityBean
public Integer ejbCreate(Integer id)
this.setProductId(id);
return null;
public void ejbPostCreate(Integer id)
//public abstract Integer getCategoryId();
// public abstract void setCategoryId(Integer categoryId);
public abstract CategoryLocal getCategory();
public abstract void setCategory(CategoryLocal category);
public abstract Integer getProductId();
public abstract void setProductId(Integer productId);
public abstract String getBrandName();
public abstract void setBrandName(String brandName);
public abstract String getProductDescription();
public abstract void setProductDescription(String productDescription);
public abstract Double getPurchasePrice();
public abstract void setPurchasePrice(Double purchasePrice);
public void setEntityContext(EntityContext ec)
System.out.println("ProductBean setEntityContext");
public void unsetEntityContext()
System.out.println("ProductBean unsetEntityContext");
public void ejbLoad()
System.out.println("ProductBean ejbLoad");
public void ejbStore()
System.out.println("ProductBean ejbStore");
public void ejbActivate()
System.out.println("ProductBean ejbActivate");
public void ejbPassivate()
System.out.println("ProductBean ejbPassivate");
public void ejbRemove()
System.out.println("ProductBean ejbRemove");
What do I needed to do to fix this problem.
Any hint or help would be greatly appreciated!!!
Yours,
Frustratedcmr field which is "category" in ur mapping , u can't use as cmp field in abstract schema mapping. just remove category from cmp field . and every thing is fine
-
HT201269 Can i set up a new iphone 5 on my mac running 10.5 and transfer my data to the new phone
Can i set up a new iphone 5 on my mac running version 5.0.6 and transfer my data to the new phone from my iphone 3
No, you need 10.6.8 for an iPhone 5.
You can purchase Snow Leopard by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The price is $19.99 plus tax. You will receive physical media - DVD - by mail.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
Snow Leopard General requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider; fees may apply.
6. Some features require Apple’s MobileMe service; fees and terms apply. -
When I download word docs my MacBook is adding the flv extension onto the doc extension and I can't open the doc. Any ideas?
Go to the main Library folder and look for a folder called Application Support / Microsoft.
There are a few folders in there, and you may have to do some digging. In one of them (mine is called MAU2.0), there should be a file called Microsoft Autoupdate. Open it.
It looks like this:
check the button for manual updates.
That should let you open the apps without triggering an automatic update. -
How can i add one field in the container for the standard task-90310004?
Hi,
Please let me know thw steps to add one field in the container for the standard task-90310004.
Usefull suggestions will be rewarded.
Regards,
Neslin.<b>Hi,
Containers are used for holding Application data for Workflow purposes.
Event container
Task container
Workflow container
Role container
Binding is the linking of data from one container to the other for making data available all across the workflow.
But you can get values from one container to another container like this
Container(Con)
1. WF Con to Role, Wf con to task con, Wf con to event
and
2. Event con to wf con, task con to wof con
and
3. Method con to task con
and
4. Task con to method con
So, we don't have direct possible binding from task con to task con.
Thanks and Regards,
Prabhakar Dharmala</b>
Message was edited by:
Prabhakar Dharmala
But you can do pass values from first task con to wf con and again from wf con to another task con -
hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA
Marco,
Here are some suggestions:
1) Check the manual the Keithley manual to see how to configure the RS-232.
On some models you need set Factory defaults to USER and turn on the RS-232.
Also there may be a setting for SCPI which you want on (probably on by default).
2) On your PC - open Device Manager. See if a COM port exists and is functional.
You must get this working before continuing.
You can set the COM port parameters by right clicking and selecting Properties.
(On some PCs the onboard ports can be disabled in the BIOS)
3) If step two was OK, open MAX (Measurement and Automation eXplorer).
On the left side, click on Devices and Hardware.
Click on Serial and Parallel.
Go to the COM port you found in Device Manager.
Open a VISA Test Panel.
Now I don't have one I can look at right now, so this is general idea:
Configure the COM port to match the Keithley settings (should be OK if step 2 worked)
Go to the (I think) Input Output tab (you want to send a command)
The command string input should already have a *IDN? entered, if not, type it in.
Click on the Query button to send the command and check the response.
If you get an ID string back (Company name, Model, FW Version ...) then it works.
(Disregard an error saying it did not get enough charcters back.)
I hope this helps,
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help. -
Make certain fields in the Account Detail Page Read-Only based on a Checkbo
Hello
We would like to make certain fields on the Account Detail Page Read-Only based on a checkbox that is on the Admin Account Detail Page. The fields we are looking to make read-only are Account Name, Primary Address, Phone Number.
ThanksBrian,
I think you'd need to use dynamic page layouts for this. Look at the Account type values, if you are already using it then replicate those values you have so if you have Business and Personal make it Business Read-only and Personal Read-only.
When you are ready to lockdown those fields change the Account type from Business to Business Readonly and have the page layout for this screen with Account type, Name, Primary address and phone number as read only. You will a separate page layout for yourself so that Account Type stays as writable for you.
You will need to check if you can have Account Name as read only as it is a required field.
cheers
Alex -
My airport turns off by itself and I have to restart the computer for it to work again and it only turns off again. I have Mac OS X version 10.6.8. What can I do to solve this problem?
Usually the HDD is the frist place to look. Use the original install disk and start up the MBP with the C key down. Go through the installation process until you see on the display a menu bar on top.
Click on UTILITIES.
From the drop down menu select Disk Utility.
Open Disk Utility>First Aid and run Verify and Repair.
What are the results?
Also look at these articles:
https://discussions.apple.com/docs/DOC-3521
http://www.thesafemac.com/mpg/
Ciao. -
Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?
Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201 -
I have an iPhone 5 and have just set up the iCloud for it. I also have an iPad with different content and I also want to connect it to iCloud. Will I lose everything that's on my iPad or iPhone or do they sync together without losing anything?
The problem is that all services are bundled with your Apple ID ([email protected]):
Your iCloud account (Mail, Contacts, Calendars, Reminders, Notes, Backups, etc.),
also iTunes & App Store purchases (Music, Movies, TV Shows, etc.),
and the iTunes Match services.
(I guess that all your devices - yours and your wife's are connected to one iTunes library, right?)
If you want that your wife gets her own iCloud account for Mail, Contacts, Calendars, etc. but gets also access to your media then you have two set up two things on her device:
iCloud (Settings > iCloud) with her account (e.g. [email protected])
and
iTunes & App Stores (Settings > iTunes & App Stores) with your account (e.g. [email protected]).
In this case she gets access to your library and could use the same iTunes Match account.
(See also: Using one Apple ID for iCloud and a different Apple ID for Store Purchases http://support.apple.com/kb/HT4895) -
My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?
I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it. -
I need to authorize my computer and I can't find the link for it. I looked under Itunes store and there are no links that say "advanced" or "authorize computer"
Authorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7. -
After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr
Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio -
I have a new computer and will I my adobe photoshop elements 12 downloading and installing, do you have the setup for me
I see only photoshop elements 13
ThanksDownloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
Maybe you are looking for
-
Someone put a password on my brand new ipod touch
I do not know password and it is disabled. How do I enable it with out having to put the unknown password in? Please help me this is the first time I have ever had an I Pod in my life!!
-
Getting music from mac fotmatted ipod to my itunes on windows
my friend let me borrow his ipod to get music from to put onto my computer then ipod...but it says its mac formatted and i have windows. i tried to change it but it said things will be erased and i dont want to mess up his ipod. how can i get his mus
-
Batch change cell from 12/28/2012 to 2012-28-12 date format
I have imported a long spread sheet and the date column is formated month/day/year. When I select cell format nothing happens. I soon reallized that by chaning the order to year/month/day the formating takes over. How can I apply this to an entire co
-
Is there a way i can add music from my iphone to itunes without paying
is there a way i can add music from my iphone to itunes without paying
-
10.6.5 allows rename of Public folder on Mac Mini but not on MacBook Pro
I have 10.6.5 running on a brand new Mac Mini and it lets me rename my Public folder so I can recognize it easily on my home network. My one year old MacBook Pro has this renaming option grayed out and I can't find how to enable it. I've looked at th