Mediainfo wont give me the Max Bit Rate Capability all the time. Is there other information I can use to convert to obtain this? Thank you

Below is the information I received from Mediainfo. Is there a way I can figure out the the maximum Bit Rate Capability with this? Lately I have have had movies stop half way through and I think I think the MBPS is too large on some of them. On some moveies Mediainfo will give me the MBPS.
Thank you
Video
ID : 0
Format : MPEG-4 Visual
Format profile : Advanced Simple@L5
Format settings, BVOP : 2
Format settings, QPel : No
Format settings, GMC : No warppoints
Format settings, Matrix : Default (H.263)
Muxing mode : Packed bitstream
Codec ID : XVID
Codec ID/Hint : XviD
Duration : 1h 54mn
Bit rate : 2 060 Kbps
Width : 720 pixels
Height : 304 pixels
Display aspect ratio : 2.35:1
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.314
Stream size : 1.65 GiB (90%)
Writing library : XviD 64

Hi, I just watched the video for the Microcell and you have to use your broadband connection to get it to work and the problem is my broadband connection is down the times I'm using my 3G. That's why I use it, because my broadband connection is not working so much of the time.
Any other suggestions? :-)
Martha

Similar Messages

How to see the multi bit rate streaming on the player

Hi.
I am using flash media server 4.5 .
I am able to stream rtmp as well as http streaming.
Now i want so stream multibitrate streaming. i am able to send the stream to the server, but i don't know how to acess it on the player.
I want to know that is there any flash var tag that i can use in my code to see the diffrent streams or i have to make a new swf file to see the streams.
Thanks
Ravi Mishra

Hi Kanwal,
Thanks for your quick reply,
I've already tried this but it didn't work. The problem is that I don't manage the proxy servers so I rely on their skills to see the logs.
The Proxies are Squid. Do you know if they need to do something else on the servers to see that field of the HTTP header?
But I'll try again tomorrow and let you know how it goes.
Thank you again.

Compressor: setting max bit rate for VBR audio

Hi,
I am using Compressor 3 to transcode DV to H.264. I want to encode the audio to AAC VBR wtih a max bitrate of 256. Under the Settings tab, under audio, for VBR there is a slider from good to best. what does this mean in terms of max bit rates? How can you use this slider in a meaninful way?
There is a setting for Average Bit Rate, where you can select a value. do we konw what the max bit rate would be?
thanks
dan

Good question about the slider…and I really don't know the answer. Why don't you try a test: crank it to one extreme and then the other with a representative source file and see what impact it actually makes on the properties of the respective output files.
Good luck.
Russ

Best average bit rate & max bit rate for DVDs playing on laptops...

I encode and burn many DVDs for use in regular DVD players....usually in the half hour range and have been encoding with Compressor 3 using these specs:
6.6 average bit rate
7.8 max bit rate
Those same DVDs, which play flawlessly in the DVD players, can occasionally hiccup when played from a laptop. Should I change the max bit rate from 7.8 to 7.7. or lower? Is that the biggest part of the equasion that may affect a laptop's ability to play without choking?
Many thanks,
John

Thanks for all your help, David S, but the point is
that I have tried many different bit rates, from 4.0
to 7.0, and I don't have time to waste all day trying
different bit rates for an 8-minute project.
My main question is: Why would it work fine on all
of my other short projects, including the 8-minute
one, and then when I cut out 20 seconds of that same
project, it starts screwing up!?!
I am going to try trashing my preferences. It is
starting to seem like a corrupt pref file to me.
It turned out to be a corrupt pref file, as I thought. Thanks for your many, many questions, David S.

Max Bit Rate of Audio and Video supported on iPod?

Hey
I've been having issues putting certain videos on my ipod... I've made sure the video bit rate is under the max.
However, I'm not sure... does the max bit rate of the audio played during videos have to be under 160 for the acc audio?
I have it at 192... which has worked with other videos, but not some.
If this is true, let me know. Thanks
n

Yes, but it's vague. Is it:
Mpeg4
2.5mbps Video Max
160kbps Audio Max
They're doing weird things with semi colons, I don't know which format it belongs to.

Bit rate for all computer?

Hi all,
I'm burning a DVD in DVDSP 4, I burned and tried it in my MacBook Pro and on normal DVD player and It works perfect, the problem comes when I play it on some not so new PCs, in one of them the buttons (text and silver frame) in the menu seem to repeat in different positions, and in the other computer it plays fine but the audio doesn't work and sounds kind of static... does it have something to do with the encoding bit rate in DVDSP? maybe in Compressor??
HDV material / compressed with DVD best 90
SD DVD/PAL
Bit rate in DVDSP 5.0 Mbps
Max Bit rate 6.2
Appreciate your help!
Javier

Which Windows program was used to play the DVDs? Hopefully not Windows Media Player.
-DH

Target & Max Bit Rate - A Little confusing Need file to be 15 GB Blu-Ray Help????

I have a 2 and a half hour project on PPro CS 5.5 that I want to encode in H.264 Blu-Ray. I want to get it to 15 GB.
What woud be the best settings to do so?
The Target Bit Rate and Max Bit Rate have a lot to do with it, but I am a little confused on what each of them really do.
I just want to get it to 15 GB and make sure the Estimated file size somewhat accurate.
Is 15 GB too big for a Blu-Ray?
Thanks in advance
PPro CS 5.5
Media Encoder 5.5.
Thanks in advance

Hi Jeff,
I just started to build just my menus with my QT files inside of them as a "Build to Folder."
I think I know why it's saying 7.1 GB used.
Since the menus in Encore stop and loop after 30 seconds, I did not like that.
I like to play a full song on each menu and then when the song ends, it starts again. If I did that on a standard 30 second menu in Encore, the song would stop every 30 seconds and start again. This was not acceptable to me.
This does not happen in DVD Studio Pro. In DVD Studio Pro, I can put in a full song with Videos in Video Zones, change the loop time to the length of that song, and the menu would play that song, and loop again when it was over.
I wanted to do this in Encore, so I had to make the menus a little longer than the song I wanted to put in them. I did that.
1) I went into After Effects with the background of the menu I wanted to use.
2) It comes in as a .psd file.
3) I then stretched it out to a length a little longer than the song. (For exaample, I'm using a song that is 4 minutes and 50 seconds, so I stretched out the background of that menu to 5 Minutes.)
4) I then rendered out that newly made 5 minute menu out of After Effects, using H.264 1440 x 1080i, 29.97 High Quality.
5) I then brought that newly made 5 minute background back into Encore and placed it over the original 30 second background in Encore.
6) Now the song and the videos inside the "Video Drop Zones" will loop until the song is over, stop, then the song will start again and the videos keep on looping. Just like in DVD Studio Pro
For this particular job I did this 6 times (1 for each sub-menu) depending on the length of the song I am using for each menu.
1) The first sub-menu is a 5 minute menu which, when rendered in After Effects, came out to be 1.5 GB Big
2) The second menu is a 4 minute menu which came out to be 1.2 GB
3) The third is a 4 and a half minute menu which is 1.35 GB
4) The fourth is a 3 and a half minute menu which is 1.05 GB
5) The fifth menu is another 4 minute menu which is 1.2.GB
6) The sixth menu is a 7 minute menu which is 2.1 GB.
When you add them up it actually comes out to be 8.4 GB just the menus without any videos in them.
So Encore has already compressed them down a little.
It's not the videos that are taking up much space, but these menus.
Since I am building my job in Encore to a folder, I want to see what the actual size comes out to be after it's compressd. This will give me an idea of how big I can make my 2 and a half hour wedding. The Target and Max Bit rate.
I hope that sheds some light on why Encore is saying that the menus and QT files are taking up 7.1 GB already.
I wish there was another way that I can have my menus play for the length of any song without having to go into After Effects and stretch each menu to accomodate the length of a particular song. This takes up a lot of space, but it's the way I like to make my menus.
Thanks again

After I download a 256 kbps song using ITunes Match, how do I get it to play on my computer at the higher bit rate once I turn ITunes Match off again?

After I download a 256 kbps song from the cloud using ITunes Match, how do I get it to play on my computer once I turn ITunes Match off again? I have been using ITunes Match for awhile now to increase the bit rate on songs to 256 kbps. Once I download the songs at the new bit rate, I turn off Match because I want to eliminate duplicates. Usually there is no problem. This time, however, 278 of my songs lost their file association and were unplayable unless I locate the song files within my computer. These are songs purchased from Amazon. In order to play them again in ITunes (Match is now off), I must locate each song file individually (I've tried to do it in bulk but have not succeeded) but now the bit rate has returned to the lower number BEFORE I matched the song. I should have never used Match in the first place. Any ideas, anyone?

I discovered that the NEW 256 bit file does reside on my computer, in the ITunes files (My Music/ITunes/ITunes Media/Music. So I can bring the songs back as 256 kbps, and I have been successful now at locating more than one file at a time, by clicking on the "find other missing files" tab in the popup window. Previously, I'd been going back to my Amazon files, and not only was I unable to bring back a 256 version, but the popup window would not locate similar files. So while I wish ITunes Match would automatically associate the ITunes Match file, at least I can retrive the file association without hours and hours of work.

What is the max frame rate in depthFrame

In v1.8, I remembered the frame rate can be up to 30fps in depthFrme. what is the max frame rate in depthFrame in the v2.0? And how can i set it? thx!

Depth (and IR, body, face and HDface) frame rates are 30fps.
Color is 30fps unless low light mode is detected then it automatically switches to 15fps.
If you're using the multistream source it will stream at the lowest framerate from the chosen framesources.
When you're using separate sources they all stream at their own fps rate.
Frame rates can not be set by the user.
Brekel

The best Bit rate for a 1 hour film

Hi all
Just a quick question does anyone know the best bit rate to use to compress a 1 hour film. I want the best quality possible
Any advice would be gratfully recieved
Thanks

If you're using Compressor and it's a one hour encode then use the CBR setting with a bit rate of 6 or 6.5. Also encode your audio to the industry standard .ac3 file format. The combination of audio and video bitrate is always a compromise between quality and having consumer DVD players stalling or choking because the combined birate is too high.
However, the media content you're encoding will always determine how you should encode: video with lots of fast action needs the VBR setting, whereas the CBR setting can be used when there is little action. But generally, the CBR setting in Compressor will do an okay job with project durations of one hour or less, regardless of the action in your video.
Hope this helps.
- Don

What is the recorded bit rate of iTunes songs i buy?

What is the recorded bit rate of iTunes songs I buy? 192/24? Other?
Thanks!

Thanks for the prompt reply, Neil!
(For some strange reason the system is letting me reply , but won't let me award you a "This solved my question." I'll have to try again later.)

HT6162 Hi guys, I downloaded this new iOS7.1 but it always fails to install. It says I am not connected to the Internet while I have all the network and second excuse it gives is that the software update is currently unavailable. Please help.

Hi guys, I downloaded this new iOS7.1 but it always fails to install. It says I am not connected to the Internet while I have all the network and second excuse it gives is that the software update is currently unavailable. Please help.

Hi Romantilizer,
Hook your phone up to iTunes on the computer you sync with and do your update from there. This is a robust iOS release, and doing it OTA is not always successful. I tried on my iPhone a couple of times, and it aborted the update twice. Did it via the Mac, and it was fine.
It takes a bit of time, so hook it up, make sure it is updating your phone, and then find something else to do for a couple of hours.
Cheers,
GB

I inadvertently downloaded the 64-bit version and need the 32-bit version of Lightroom 6 upgrade.

I inadvertently downloaded the 64-bit version and need the 32-bit version of Lightroom 6 upgrade.
i go to the download page and i dont see a 32 or 64 bit option.
Please help! Thank you,
Carlos

lr 6 is 64bit only, System requirements
http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Will all of the 32 bit apps work in the new 64 bit iOS7?

Guys,
Will all of the 32 bit apps work in the new 64 bit iOS7?
Regards, Phil
Macintosh b'gosh

Yes, unless the app is a strangely coded one.

How to change the UWL refresh rate for all portal users.

Hi Portal Experts,
How to change the UWL refresh rate for all portal users?
Users can individually change the refresh rate through "Personalise View" in UWL.But we want this to set it for all users(we have 10k portal users).
It was defaultically set to 5 mins for all users.How to change this to 20 mins.
Thanks
Sony.

1.      Launch the UWL iView configuration page.
You can access the iView from the UWL administration pages (System Administration ® System Configuration). Navigate to the property editor as follows:
      From the Universal Worklist Systems, choose the system for which you want to edit the properties.
    Choose Edit.
may be you can get clear help from below help file
http://help.sap.com/saphelp_nw04s/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
regards
nagaraju

Mediainfo wont give me the Max Bit Rate Capability all the time. Is there other information I can use to convert to obtain this? Thank you

Similar Messages

Maybe you are looking for