Members in the RecycleSet

I am seeing members added to the RecycleSet in the console but am unsure what it means and why it's happening. Can anyone enlighten me?
MasterMemberSet
ThisMember=Member(Id=2, Timestamp=2009-07-08 11:07:51.271, Address=10.232.97.61:8091, MachineId=33597, Location=process:[email protected])
OldestMember=Member(Id=5, Timestamp=2009-07-08 10:16:40.776, Address=10.232.97.61:8088, MachineId=33597, Location=process:[email protected])
ActualMemberSet=MemberSet(Size=4, BitSetCount=2
Member(Id=1, Timestamp=2009-07-08 10:18:56.237, Address=10.232.97.61:8090, MachineId=33597, Location=process:[email protected])
Member(Id=2, Timestamp=2009-07-08 11:07:51.271, Address=10.232.97.61:8091, MachineId=33597, Location=process:[email protected])
Member(Id=4, Timestamp=2009-07-08 11:08:57.763, Address=10.232.97.61:8089, MachineId=33597, Location=process:[email protected])
Member(Id=5, Timestamp=2009-07-08 10:16:40.776, Address=10.232.97.61:8088, MachineId=33597, Location=process:[email protected])
RecycleMillis=120000
RecycleSet=MemberSet(Size=1, BitSetCount=2
Member(Id=3, Timestamp=2009-07-08 11:08:36.641, Address=10.232.97.61:8089, MachineId=33597, Location=process:[email protected])
MasterMemberSet
ThisMember=Member(Id=2, Timestamp=2009-07-08 11:07:51.271, Address=10.232.97.61:8091, MachineId=33597, Location=process:[email protected])
OldestMember=Member(Id=2, Timestamp=2009-07-08 11:07:51.271, Address=10.232.97.61:8091, MachineId=33597, Location=process:[email protected])
ActualMemberSet=MemberSet(Size=1, BitSetCount=2
Member(Id=2, Timestamp=2009-07-08 11:07:51.271, Address=10.232.97.61:8091, MachineId=33597, Location=process:[email protected])
RecycleMillis=120000
RecycleSet=MemberSet(Size=4, BitSetCount=2
Member(Id=1, Timestamp=2009-07-08 11:44:33.099, Address=10.232.97.61:8090, MachineId=33597, Location=process:[email protected])
Member(Id=3, Timestamp=2009-07-08 11:35:05.516, Address=10.232.97.61:8089, MachineId=33597, Location=process:[email protected])
Member(Id=4, Timestamp=2009-07-08 11:43:01.089, Address=10.232.97.61:8089, MachineId=33597, Location=process:[email protected])
Member(Id=5, Timestamp=2009-07-08 11:44:03.317, Address=10.232.97.61:8088, MachineId=33597, Location=process:[email protected])
Edited by: WillyM on 09-Jul-2009 01:20

Hi,
I believe that a member ID can be recycled after that member has been dead at least RecycleMillis milliseconds. When a member leaves the cluster, it gets added to the recycle set after RecycleMillis has elapsed. Once added to the recycle set, that member's ID can be given out.
Thanks

Similar Messages

What happens on iCloud (ex. contacts) when multiple family members use the same Apple ID?

What happens on iCloud when multiple family members use the same Apple ID? For example if we all choose to use iCloud for contacts, are they all merged together? We use the same Apple ID so we can use find my iPhone to keep track of the whole family.

Of course if you are both connected to the same iCloud account you have the same contacts - what did you expect?. The contacts live on the server and are read from there by the devices; so as you've both managed to sync your contacts up to iCloud they are now inextricably mixed. You can only delete your contacts by deleting individual ones, and doing that will delete them from your phone as well.
You can only unravel this by
1. In the iCloud contacts page at http://icloud.com, select all the contacts, click on the cogwheel icon at bottom left and choose 'Export vCard'.
2. Sign out of System Preferences>iCloud
3. Create a new Apple ID and open a new iCloud account with it for your own use.
4. Import the vCard back into the iCloud contacts page.
5. Go to http://icloud.com and sign in with the original ID. This is now his ID. Work through the contacts individually deleting the ones you don't want him to have. When done sign out and advise him to change his password.
6. Go to the new iCloud account and delete his contacts individually.
Of course if you have also been syncing calendars and using the same email address there are problems with doing this.

I am using logic to record a podcast and using soundboard to use as a playback for music and sound effects. I'd like to soft patch sound board into logic, and still use my interface for recording audio from the other members of the podcast.

I am using logic to record a podcast. I have a presonus firestudio mobile for my interface so I can record several people at the same time. I'm also using Soundboard for a playback system for music and sound effects. I'd like to know how to soft patch Soundboard into Logic while still using the Firestudio interface to record the other members of the podcast. Does anyone know how to do this? and if so can you tell me how to do it? Thanks.

Thanks. Now, since Apple failed to provide an audio in jack for their new and improved iMacs (mine has one), all I can suggest is that you contact AppleCare, since you have 90-dqy free phone support. If need be, you might reconsider your purchase, but that's for you to decide.

How can I set up an SMS group so that all group members can dial a group number and have a text sent out to all members of the group

How can I set up an SMS group so that all group members can dial a group number and have a text sent out to all members of the group
This would be an SMS group similar to an email listserv but running on the SMS network
I have seen private individuals offering this service
It seems strange to me that no internet site like Apple, Yahoo or Google offers this as a free service much as the email group services are free services.
Steve

I think the app GroupMe might do what you want. You might also try contacting your carrier. My carrier offered some fancy group texting service for a while but they never really advertised it so, unless you asked, you never would have known. But, GroupMe is available in the app store. There are lots of other apps that also do group texting but it seems to be the one that gets recommended the most.

How can I increase the members in the chat groups?

The number of members in the cha groups is limited (3000)
How can I increase the members in the chat groups?

Elaborate.

I have my own icloud account separate from my family's apple ID for itunes. I need more storage for icloud...do I have to pay a separate $20/ month to get more storage or does the $20 include all members of the plan?

I have my own icloud account separate from my family's apple ID for itunes. I need more storage for icloud...do I have to pay a separate $20/ month to get more storage or does the $20 include all members of the plan?

Welcome to Apple Support Communities
If your iCloud account uses your family's Apple ID, you will pay $20/year for all your family members. If your iCloud account uses a different Apple ID than your family's Apple ID, you will pay only for you

Can songs uploaded using the iMatch service be accessed by other family members using the Family Sharing feature?

Can songs uploaded using the iMatch service be accessed by other family members using the Family Sharing feature?

No
Which purchased content can I share using Family Sharing - Apple Support

Account Dimension not showing all members in the cube in Analysis Services

Hi,
         In SAP - BPC 5.1 after processing account dimension all the members are created under account dimension in analysis services but the same cannot be found in the data cube. Hence the reports generated through SAP - BPC is not showing all the members.
         The issue looks very strange as we can see the members getting created but the same is not getting populated in the cubes. I am not able to visualize what exacly the issue is? Is it with the application or with the analysis services?
Thanks
Sharath

Your sixth sense is correct, there is definitely support in MSAS and BPC 5.1 for multiple hierarchies in the account dimension.
I'm also referring to parentH1 and parentH2, but perhaps we're still speaking of different things.
In the past, I faced a very similar problem as you, and the root cause was because I had one member, let's call it FancyParent, which, in H1, had children Child1 and Child2.
But in H2 it had children Child1, Child2 and Child3. I forget now if that was how I wanted the setup to be, or if it was a mistake on my part, but either way, MSAS doesn't allow this. The admin consol didn't complain when processing the dimension -- this was in Outlooksoft 5.0; perhaps validation has improved now.
But the cube was completely unworkable. Certain things were calculating correctly, but everything in the account dimension in the area around FancyParent (above and below it, in both hierarchies) was quite unpredictable.
By disabling first one, and then the other, of the two hierarchies, and disabling blocks of accounts, I was eventually able to pinpoint the problem. But it took days to figure out what was the problem. (The account dimension had 2500 members and 4 hierarchies, and it was not a pretty sight.)
A parent must have the same definition of children in all hierarchies. It can't, as another example, have children in H1, and be a base member in H2. Each member can have different parents in the two hierarchies, but must always have the same children in both.
To work around this problem, I had to create two separate accounts NetIncomeH1 and NetIncomeH2 (and PretaxIncomeH1, PretaxIncomH2, etc. all the way down to the point where they branched off), to get the two separate aggregations of the P&L in the two hierarchies. Once I did that, it made sense to me why, but I also swore off on frivolous extra hierarchies ever again.

Members of the Smart List aggregated in the FR report

I have a Hyperion Planning 9.3.1 application where one of the scenarios has SmartList associated with it. The SmartList is used on one of the forms, where accounts are in the rows and scenarios are in the columns. First value in the SmartList is “Yes”, second - “No”. The user may select one of these values or not to select anything.
I have a financial report that uses this Planning application as the data source. This report matches the form, with accounts in the rows and scenarios in columns.
Here what happens. Say I have two accounts – “Oil” and “Gas”. Both are children of account “Fuels”. Both have “Yes” selected on the form. “Fuels” has nothing selected on the form.
When I run the report, I see “Yes” for this two accounts, as I expect to, but I also see “No” for “Fuels”. If I change a form and put “Yes” for “Gas” and “No” for “Oil”, for instance, then in the report for “Fuels” I will see number “3”.
It looks like it sums up the values associated with the members of smartlist and present an aggregated number. “Yes” is equal to “1”, that’s why in the first case I get “No” which is an equivalent to 1+1. If I have “Yes” and “No” – I get 3 because it sums up 1 and 2. And as there is not member of the smarlist with value “3” it just shows this number.
Any way how I either suppress these aggregated values on the report or prevent the values for this scenario from aggregation?
Thanks!

I generally have all my SmartList members with the consolidation member "Never". This ensures that the member doesn't get aggregated for any dimenson.
Cheers,
Abhishek

To bold the descriptions for the structure members in the BEX Query

HI Experts,
Could any one please advise on how to BOLD the descriptions of the structure members in the BEX query.
Thanks in advance,
Jeswanth

Are you looking at making the same BOLD in the web display ..?
To do this :
Execute your query - go to display source for the page and you will see the structure members identified with a particular CSS class.
Open the CSS file from the MIME repository and then identify the class that is used for the structure elements and then change th CSS to make it bold and then upload the changed CSS into MIME .
Refresh the HTTP global cache from SMICM and then run your report again - you should be able to see the structure elements in BOLD.

DataSource or Crosstab -- List of all Members in the current selection

Hey Design Studio Experts,
i need a collection of the >>current<< member list of a datasource,
Example: i have the Datasource DS_1, which is filtered by 2-3 filters, so the number of lines, that is delivered by the DS_1 is less than the number of lines in the Query of the DS_1.
I have checked already the built-in Methods: getData delivers only a Sting (single value), but i need all members of the current selection.
Thank You in advance.
Alex

Nikhil ,
There are many IDs in the selection, and i need the complete list of them,
i repeat my requerement again:
1) WE have query that delivers following lines:
ID          Color                    Amount
a               red                              3
b               blue                            3
c               Magenta                     1
d               blue                            10
2) We set a filter : Filter_1 (Color) = Blue.
3) After the upper filter got active, we see only two lines:
ID          Color                    Amount
b               blue                            3
d               blue                            10
As i said im interested in the IDs of the selected lines. So i need a list of values = (b, d)
meanwhile i think there is now suitable method that delivers the needed result.

Why don't VIs created from VITs automatically class members if the VIT is a member?

I have an .lvclass that contains a VIT that I use to create methods. The VIT is a member of the class so that it can access the data members. However, the new VIs that I create from the template are not automatically members of the class, so I have to save them and add them to the class when they are complete.
Is there anything I can do to save the extra steps?
Solved!
Go to Solution.

New... opens this (I actually keep them on a pallate under favorites too with Place Contents enabled) 1 click to place this including documantation
Now if only New... was available in Projects...
Jeff

Is it possible to call the members of the CFMapping dimension from a EVDRE?

Hello experts,
I am working with the application Cashflow. This application uses the dimension CFMapping to match the dimension CFAccount with the dimension Account, when the package "Cash Flow Recalculation" is run. I would like to know how could I call the members of the CFMapping dimension from a report. When I try to do this,the EVDRE shows the following error message: #ERR: Invalid CFMAPPING, col# 1.
Thanks in advance,
Álvaro

Hi Mehul,
I have already checked this but it still doesn't work. The dimension CFMapping is not contained in any application, in BPC administration I checked this in the application folders. I think that the CFMapping dimension is only used to support the execution of the package I mentioned in the first message, and that is why I have problems to call it's members from a report using the normal procedure.
Regards,
Álvaro

Compare two members from the same dimension in HFR

Hi,
Is it possibe to compare two members from the same dimension in HFR? The requirement is to compare Year and Week members from the same dimension. The Week date will be selected from POV. The corresponding Year date should be displayed in the report. Week dates are in the format W2008-03-07 and Year dates are in YTD2008-03-07.
The dates are same except the preceding character.I am unable to compare these two. In my understanding there's no substring or replace functions in HFR.
Kindly help. Thanks in advance.
Regards,
Uma

Hi,
How is your database structured? it may be possible to use the 'RelativeMember' function if it will always be the same number of steps between the 'W' member and the 'YTD' member, e.g. if your hierarchy is something like:
Time
.Weeks
..W2008-03-07
..W2008-03-10 etc.. for 52 weeks
.YTD
..YTD2008-03-07
..YTD2008-03-10 etc.. for 52 weeks
In your report select 'Current Point of View for Time' in one row/column and in the other use:
RelativeMember set up as follows:
Member: Current Point of View for Time
Offset: 52
Hierarchy: Time
RelativeMemberList: Lev0, Time
UseFirstDescendant: leave unselected
Hope this helps
StuartGame
www.analitica.co.uk

Update membership is taking too long to update members in the collection - SCCM 2012 R2 + CU1

Hi,
We have a standalone primary site server hierarchy (SCCM 2012 R2 + CU1), Not only with this upgrade.starting from the SCCM 2012 SP1, We had an issue that members in the collections are not being updated as expected (like SCCM 2007).
I have created about 20+ query based collections with the normal with the "Full schedule" option but not used "Incremental update" option. Also i have observed that after a day or so..members are appearing.
anyone had solution to this, why this collection update membership in SCCM 2012 is improper?
Thanks.
srkr

Hi Torsten,
We have about 25 machines in each collection, My collection condition is based on the package (Ex:if the package is not installed on the machine, it will appear in the collection to target the package),
WQL query looks good, I have used the same logic for all the collections with different package.
I did not see any error in colleval.log, all the collections are evaluating properly,but I can see .CEP files in COLLEVAL.BOX which has 0 KB size.
Any Idea?
srkr

Members in the RecycleSet

Similar Messages

Maybe you are looking for