Memorex 52 max CDRW burns but does not playback after installing 7.0

I have a Memorex 52 MAx CDRW which worked fine with version 6.0, but after installing 7.0 and all recent upgrades it will burn the playlist ok but when attempting to playback recorded or regular cd music, it will skip from one song to the next on the cd without playing it. If i install the 6.0 version it will play ok, but 7.0 and up will not. Any suggestions?

bump

Similar Messages

HT1386 My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?

Hi, My iOS device (Ipad mini) only appears in iTunes while cable-connected, but does not appear after diconnect the cable. How can I Wifi sync ?
Documents say
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it....
But I can't see my iPad Mini in iTunes.
And my Ipad (Settings, General, iTunes Wifi Sinc) shows a message :" Sync will resume when xxx(my PC with iTunes) is available "...
Both are in the same network,
Ipad mini is is plugged in to power
. iTunes is open on the computer
what can i Do ???

Hi Skydiver119, and tks for four interest.
I have done exactly as you say, but it does not work for me.
You indicated " Navigate to the info tab and scroll down. There'll be a check box for 'sync over wifi' or something to that effect. Check that box and sync to affirm your choice."
I navigated to Summary tab (not Info Tab) and checked "Sync with this ipad over Wi-Fi"
I disconnect the wire,
and my iPad disappears from my iTunes screen.
in my iPad ->Settings -> General -> iTunes Wi-Fi Sync -> says " Sync will resume when (my PC) is available.
So, I can not sync via wi-fi
I appreciate if you can help me.

Flash Player 10 ActiveX, installed perfectly on FireFox but does not want to install on IE8

I tried to install Flash Player 10 ActiveX but no luck
operating system VISTA 32bit
web browser and version IE8 32bit
Flash Player version WIN 10,1,82,76
is there anything in the security needs to be adjusted?
It was running perfect before I do the latest upgrade
It is running perfect on Fire Fox
It is just not working on IE8
Flash Player 10 ActiveX, installed perfectly on FireFox but does not want to install on IE8

Hi, You might want to review the Troubleshooting Guide as it has been updated and a lot of new information is now included. If you prefer you can use the Manual Installer for IE which you'll see there. A lot of the questions that I would ask are listed also.
http://kb2.adobe.com/cps/191/tn_19166.html
Hope this is helpful for you.
Thanks,
eidnolb

My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Fastdial does not work after installing version 7.0.1

Fastdial does not work after installing version 7.0.1

'''this will fix your problem with FF 7.01 '''
'''http://dl.dropbox.com/u/10199236/fast_dial-3.5.1-fx-modified.xpi '''
'''''This link will fix Fast Dial for Firefox 8.0.1'''''
'''http://dl-web.dropbox.com/u/12466346/speedfox.org/addons/fast_dial-3.5b1fixed2-fx.xpi '''

Mp600r does not work after installing mavericks 10.9 what do I do now ?

Canon Mp 600r does not work after installing Mavericks 10.9 What do I do now ?

This thread should help:
https://discussions.apple.com/message/19407500#19407500?ac_cid=tw123456#19407500

Successfully downloaded os x lion, but does not show as installed

Bought and successively downloaded os x lion on my Mac, but does not show as installed

That's one of the confusing things about the App store. The app you purchase there is the Installer.
If you've successfully run the installer then your Mac is on Lion but the last step of the install proceedure deletes the Installer from your apps directory. The App store then reflects that the Installer is not installed on the system.. which is true.
You can redownload the installer from the app store if needed. If the installer is still in the Apps directory then you probably haven't installed Lion yet, just downloaded it.
Regards,
Captfred

Hp scanner software does not open after installing 10.4.8

Your help, please...since installing OS 10.4.8 my HP scanner software (5370c) does not open. It appears to begin opening and the icon appears briefly on the Dock, but does not stay there.
Also, the keyboard does not light up in low-light conditions as it did previously. Yes, I have the box checked in the keyboard section of system preferences. (It is a brand new keyboard, recently replaced, but the lighting worked under OS 10.3.9.
Any ideas?
Thanks for your help,
Dean

yes, it seems to almost complete the installation and then tells me that I do not have the right permissions.

Game does not start after installing on mac pro

Game does not start after new install on mac pro ?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Bootcamp enabled on startup but does not startup after rebooting

Hi all,
My bootcamp is going berserk.
It hasn't been able to start-up for a few days and i've been searching for a fix.
I've found out to check whether bootcamp is enabled on startup. After i check on system configuration, it was enabled however after the reboot, it still doesn't startup!
Its frustrating as i can't everytime turning on my computer and going in to program files to on my bootcamp every single time i reboot.
Please anyone could help me?
I'm running on Bootcamp 4.0 on MacBook Pro 13" Windows 7 partition (Didn't check on what OS i'm using x.x)

For bootcamp within the windows OS, bootcamp is usually shown on the notification area icons
Like so.
But, now my computer does not have the symbol of the bootcamp panel when i boot up my windows. It thus, causes the function keys on the keyboard and th trackpad to not able to function.
So, for me to make my function keys and trackpad to function properly, i would need to go to control panel to redo the settings everytime i start up.
Without the startup of bootcamp control panel to support the keyboard and trackpad, it would fail to function on my Windows. However, booting in iOS would work perfectly.

Safari does not start after installing Mountain Lion

I installed Mountain Lion on my Imac. No problem. However after installing ML on my MacBook Safari doesn't open. I have installed ML again but still it does not work.
Help!

You haven't indicated if you have tried multiple DVD/CD's or just the one. Look under the "Apple > About This Mac > More Info.. > Disk Burning " do you see the Superdrive? If the system recognizes it but it doesn't work try a
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.

Iphone works but is not charging after installing new battery

Hi guys ,
I am going to do my best to clearly explain what has happened with my Iphone 5s. I noticed my battery was losing charge much quicker then normal so i went ahead and ordered a new battery from Ifixit. I consider myself pretty decent at hands on jobs so i went ahead and replaced the battery myself to try and save some money. The installation went as smooth as can be, No broken parts to my knowledge and the phone went back together no problem. I then powered the phone on , it came on just like normal and everything seemed to be ok , besides the fact the the battery they gave me was only charged 13%. This is when my problems started to happen , I grabbed my apple charger and plugged it in like i would do any other time to charge up the battery. I came back in a hour and noticed that it was still stuck on the same 13% and had not moved at all. It recognized the charger and even said it was charging and showed the lightning bolt but would not take the charge.
I started looking up things online about how to fix this and found a lot of people with similar problems after they changed there battery or lcd screen. I then unplugged it and thought maybe it needed to be calibrated so i let it run completely out of juice until the phone shut off completely. Plugged it in again and now it was stuck at the screen when your phone is dead and shows that it needed to be plugged in. I tried cleaning out the the charger port and that did not help. I then thought it might be the battery IFIXIT sent me so i took the phone apart again , and put my old battery back into the phone , put it all back together and it turned on no problem, I thought my issue was fixed but i was wrong. I went a plugged it in to charge it and the same thing happened again , would not take a charge just stayed stuck on the same percentage. I went through the phone and made sure all my connections were good and nothing was broken. The phone has been barley used over the last year and before i replaced the battery it had no problems what so ever and the charger port always worked fine.
Does anyone have any idea what my problem could be? I have read so many forums and spent hours trying to get to the bottom of this with no luck yet. Alot of other people seem to have this same problem happen when they replaced there battery or LCD but cant find a solution. I contacted IFIXIT and they thought it could be a bad battery and are sending me out a new one next day shipping. That was before i tested my old battery and found out it has nothing to do with a bad battery it just wont take a charge now. Any help will be greatly appreciated i no longer have apple-care so that's not a option. i was told to maybe clean all the connections with alchol but im a bit nervous that could cause more problems?

konradsa wrote:
Ok, you go and pay that 80 bucks, I will go have a nice dinner with the money I saved.
Fair market value for a legitimate iPhone battery would be about $40-50. If you're paying anything less than that, then you're getting an inferior battery. How much did you pay for the replacement battery? Let's assume you didn't get scammed, and actually did purchase a quality (albeit unauthorized) battery.
So, you saved about $30-40. Okay, good so far. However, now you run the risk of:
A) The installation was performed incorrectly, and causes a problem down the road.
B) The battery or iPhone has a related issue within the next few months, and you pay for another battery and/or another installation, because the first one didn't fix the problem.
C) That battery wasn't actually a quality battery; it was just priced like one, and it leaks, expands, causes a fire, etc.
There's a phrase you need to learn; penny wise and pound foolish.
Depending on the context, it has various meanings. In this context, it means you are trying to save a little bit of money in the short term, but failing to see the possible long term costs.
Let's take a hypothetical:
I have an iPhone 6 Plus, 128 GB. Retail cost: $949 USD + tax.
My battery needs to be replaced. Apple quotes me $79 USD + tax. I find a place in the mall called 'iFix iPhones 4 U' that will do it for $40, parts and labor included.
"Heh, dumb Apple, they think I'm a sucker. I'm saving me $39 and taking my girl out to a fancy place, like Red Lobster!" (sarcasm intended)
About three months later, I notice that my iPhone 6 Plus is getting really warm. Like, toasty warm, almost enough to burn my skin.
I go back to the kiosk in the mall that replaced my battery. They tell me they don't warranty their work past five days, and they could replace the battery again for $40, if I want. Great. Now I've broken even, but at least I have that great Red Lobster dinner memory!
A few weeks later, the screen flashes red, and the iPhone locks up.
The kiosk guy tells me he's down, and to go somewhere else. He's sick of seeing me, because he's already got my money, and there's a sign that says 'All sales final'. What am I gonna do? Hire a lawyer over $80?
Maybe Apple can help. I go to the Apple Store, explain my case, they inspect my iPhone, and then tell me they cannot replace the battery because the device has had unauthorized service. Dang. Okay, but I've heard that I can get an iPhone 6 Plus exchanged, even if it's damaged, for $329. Surely they will do that, right?
Nope. Unauthorized modifications void ALL support options from Apple. Meaning I cannot get it replaced by Apple. So, what are my options?
A) Pay another $949 USD + tax to get another iPhone 6 Plus 128 GB.
B) Find another unauthorized shop and try my luck again... and again... and again.
Guess I'm not going to Red Lobster anytime soon.
“For the want of a nail the shoe was lost,
For the want of a shoe the horse was lost,
For the want of a horse the rider was lost,
For the want of a rider the battle was lost,
For the want of a battle the kingdom was lost,
And all for the want of a horseshoe-nail.”
TL;DR Version: Saving $30-40 bucks today might end up costing you 20x as much later on.
Instead of that nice dinner, chew on that instead.

Flash Player Does Not Work After Installing on Windows XP

I had been playing a shockwave game for several days and had completed 19 of 35 levels. When I went to play it again, I received a message that I need to update to a newer flash player. I downloaded it successfully, but it does not work. There is no file size and I uninstalled and reinstalled it several times. I also changed the internet settings as suggested. I am also the administrator of and only user of this computer. I can also play the same game on another computer that has windows 7 and have no problems. I have completed 33 of 35 levels with no problems. The computer with XP has a 32 system.
Any help would be appreciated.

I had been playing a shockwave game for about a week . When I went to play it again, it stated that I need to upgrade to a newer adobe flash player. I have windows xp with a 32 system and explorer 8 browser. After installing the flash player, it has no file siz for the player.. After I installed it, the page says it had been installed. The game still says I need to upgrade the flash player. I uninstalled it, reinstalled it, changed my internet settings as suggested, and it still does not work. I can play the same game on my other computer with windows 7 with no problems. It has a file size listed for the flash player. The computer that I am using now has windows 7 and a file size for the adobe flash player.
Any help with this matter will be greatly appreciated.
Ernestine W. Washington

My DotNet application does not work after installing Framework 4.0 on My client PC

HI
I created application in Visual 2010 therefore I need framework 4.0 to work my application on client PC but it is still not working.
I have few forms in my application.
Form contact has controls Textbox, labels, button on it. (This form works fine absolutely )
Form Invoice has DatagridView, textbox, label,button . (This form is NOT working at all, give me an error)
Any bright suggestion will help me to NOT install whole carp of visual studio 2010 on my client pc and also save Space.
Thank you in advance

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"Selected disk does not exist" after install using Unetbootin

Hello, I downloaed core iso file and use unetbootin to created a bootable usb disk, then I booted from the usb disk, installed the system as usual, then I rebooted the machine, the grub menu is shown, but when I selected archlinux, it shows:
Booting 'Arch Linux'
root (hd1,0)
Error 21: Selected disk does not exist
Press any key to continue...
if I press any key, it goes to grub menu again.
I noticed that when I installed the system, the usb disk is /dev/sda1, the harddisk is /dev/sdb1, /dev/sdb2 ... (several partitions), so I guess there is a problem here, and when I reboot, harddisk becomes /dev/sda1 sda2... so the system cannot find /dev/sdb1 2...
I read a post about unetbootin, it did not mention anything about the problem, so I think there is no problem install using unetbootin...

Try to change (hd1,0) pour (hd0,0). GRUB considers the disk from where he was loaded as hd0.
If you want more infos check with http://sourceforge.net/projects/bootinfoscript/
and post it's output.

Memorex 52 max CDRW burns but does not playback after installing 7.0

Similar Messages

Maybe you are looking for