Memtest Memory lock failed
Hi,
I've just ran memtest for some new RAM on my iMac. In the logs i got this:
"ERROR: Memory lock failed - reason unknown."
What does this mean? And Is it bad?
Thanks
Hi fred,
This question is asked in the rember support page at the bottom and the answer is there as well.
http://www.kelleycomputing.net/support/rember/
Whilst technical yes, bad no.
Similar Messages
-
Hello,
after upgrading the 2 servers in server pool from 2.1.2 to 2.1.5 using yum, all vms throw:
Error: Acquire running lock failed: 256
when trying to start them. HA-infrastructure-check works well from OVMM 2.1.2 (not upgraded yet) and if we disable HA for the server pool, the vms come up. Shared storage is on NFS
We have the following in /var/log/xen/xend.log:
[2009-06-26 14:52:21 2649] DEBUG (XendDomainInfo:87) XendDomainInfo.create(['vm', ['name', '470_vm215'], ['memory', '1024'], ['on_reboot', 'restart'], ['on_crash', 'restart'], ['vcpus', 1], ['on_xend_start', 'ignore'], ['on_xend_stop', 'ignore'], ['uuid', '14205f6a-12cc-42da-a32e-06f30b6288d4'], ['bootloader', '/usr/bin/pygrub'], ['bootloader_args', '-q'], ['image', ['linux']], ['device', ['vbd', ['uname', 'file:/OVS/running_pool/470_vm215/system.img'], ['dev', 'sda'], ['mode', 'w']]], ['device', ['vif', ['bridge', 'xenbr0'], ['mac', '00:16:3E:32:CD:FC'], ['type', 'netfront']]], ['device', ['vkbd']], ['device', ['vfb', ['vncunused', '1'], ['vncpasswd', 'XXXXXXXX'], ['vnclisten', '0.0.0.0'], ['type', 'vnc'], ['display', 'localhost:11.0'], ['xauthority', '/root/.Xauthority']]]])
[2009-06-26 14:52:21 2649] ERROR (XendDomainInfo:452) VM start failed
Traceback (most recent call last):
File "/usr/lib/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 430, in start
self.acquire_running_lock();
File "/usr/lib/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 2891, in acquire_running_lock
raise XendError('Acquire running lock failed: %s' % status)
XendError: Acquire running lock failed: 256
[2009-06-26 14:52:21 2649] DEBUG (XendDomainInfo:1881) XendDomainInfo.destroy: domid=None
[2009-06-26 14:52:21 2649] ERROR (XendDomainInfo:92) Domain construction failed
Traceback (most recent call last):
File "/usr/lib/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 90, in create
vm.start()
File "/usr/lib/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 430, in start
self.acquire_running_lock();
File "/usr/lib/python2.4/site-packages/xen/xend/XendDomainInfo.py", line 2891, in acquire_running_lock
raise XendError('Acquire running lock failed: %s' % status)
XendError: Acquire running lock failed: 256
[2009-06-26 14:52:21 2649] DEBUG (XendDomainInfo:1881) XendDomainInfo.destroy: domid=None
and in /var/log/xen/xend-debug.log:
ha_set_dlm_lock ['14205f6a-12cc-42da-a32e-06f30b6288d4', '470_vm215'] =>
failed: <Exception: create lock('/dlm/ovm/4205f6a12cc42daa32e06f30b6288d4') failed. <OSError: [Errno 26] Text file busy: '/dlm/ovm/4205f6a12cc42daa32e06f30b6288d4'>
StackTrace:
File "/opt/ovs-agent-2.2/OVSXHA.py", line 371, in ha_set_dlm_lock
fd = os.open(lock_path, os.O_CREAT | os.O_NONBLOCK)
>
StackTrace:
File "/opt/ovs-agent-2.2/OVSXHA.py", line 379, in ha_set_dlm_lock
raise Exception("create lock('%s') failed. %s" % (lock_path, errmsg))
Any ideas?
Thanks, Olafsuk wrote:
1. To delete the database, which database are you referring to? I'm referring to the ovs-agent database:
1. Stop the agent: # /etc/init.d/ovs-agent stop 2. Delete the database: # rm -f /etc/ovs-agent/db 3. Start the agent: # /etc/init.d/ovs-agent start If you have Oracle VM Manager v2.1.5 (which you should have upgraded before your servers, btw), you can now try using the "Restore" option for the server pool. Click on the Server Pool in the manager and hit "Restore" -- this will send the configuration data back down to the agents in the pool. Alternatively, you may need to de-register the servers in your pool and re-register them.
2. To re-imported the guests, how?In Oracle VM Manager -- if you recreate the pool, you have the option of "Importing" both VM Templates and VM Guests. Deleting the pool in the Manager does not delete your guests as long as you ensure that you DO NOT select "Remove Working Directories". -
We have an Oracle SQL query which runs in seconds directly on the database but when we put it in InfoView it runs for several minutes.
We ran a trace on the query in InfoView and received thousands of lines of this:
**WARNING:CCDZMgr:Update memory info failed [cecdzmgr.cpp;1161]
Has anyone seen this before? Is it something we can repair or do we have to live with it?
Thanks
JoshHI Josh,
I have seen this in almost every 3.X log. We've looked into this and found that it's nothing to worry about. If things are running slow, you'll need to look in another direction.
Hope this helps.
Bill
Edited by: Bill Walker on Feb 7, 2009 3:17 AM -
Dear All,
Recently we had migrated BI Application from Oracle version 8.1.7.0.0
to 9.2.0.5.0 but we had Cache memory lock issues in production after
smoothly going through acceptance (for two months), that was
attributed to bug in Oracle version 9.2.0.5.0 and a patch was applied
as 9.2.0.6.0. But similar kind of issues can be still noticed (3 times
in last 5 months). It happens right at the beginning of the batch, to
be more specific, database goes to cache memory lock while most of my
jobs are running integrity violation checks.
Any inputs on this would be highly appreciated.
Regards,
MaheshHello again TexasBooster,
It is good to hear from you again!
To contact our technical support, please call at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Error: xcb_xlib_unlock:Assertion 'c- xlib.lock' failed
Please help me to resolve the following error.
Error: xcb_xlib_unlock:Assertion 'c->xlib.lock' failed
Our application has the reports module, where we are using the bar charts
to display the reports. For the charts we are using awt packages and jfreechart
libraries to display the reports.
When we deployed the application on fedora8 on any of the instance,when we try to click the link of the reports, the above error is occured and we are not able to display the reports. And also the server is getting down when this lock is obtained.
This is very serious problem we feel. Please provide us the solution for the problem.This error affects MANY programs which use java, including those that use a java environment for installation. OpenOffice is a prime example. Apparently this error is an internal bug or interaction between java and xcb and will never be patched in java 1.6.
I tried the various suggested fixes but none worked. The only one which works (yesterday!) is to upgrade to the latest build (b24) of the java 1.7 release candidate jdk.
I first attempted to install only the jre (28MB) but unfortunately, it uses the existing java 1.6 environment and so fails with the same error. The jdk (58MB) installed from the 'self-installing' Fedora bin file without problems and I was then able to install OpenOffice 2.3.1 without difficulty. This is on Fedora 8.
The page I found was: http://download.java.net/jdk7
Hope this helps.
Geoff Newbury -
Can some one please assist me to get rid of the below error when trying to bring up the SOA services in Weblogic?
"Locker failed to offer due to timeout.Please increase worker thread count by increasing DeferredWorkerThreadCount in mediator-config.xml"
We tested the agent, node manager and everything seems to be working fine. Its persistent in UAT environment which is a clustered environment. 1st managed server for SOA is having the issue while the second one is working fine. Below are the list of manages servers in the env:
2 managed servers for ADF,
2 managed servers for BAM,
2 managed servers for SOA,
2 managed servers for WSM.
The affected SOA1 managed server was working fine till last week and there were no changes made to the environment. Please let me know if I can furnish any further info.
Thanks!
Nidhi Gangadhar.
WebLogic PortalSOA SuiteCan some one please assist me to get rid of the below error when trying to bring up the SOA services in Weblogic?
"Locker failed to offer due to timeout.Please increase worker thread count by increasing DeferredWorkerThreadCount in mediator-config.xml"
We tested the agent, node manager and everything seems to be working fine. Its persistent in UAT environment which is a clustered environment. 1st managed server for SOA is having the issue while the second one is working fine. Below are the list of manages servers in the env:
2 managed servers for ADF,
2 managed servers for BAM,
2 managed servers for SOA,
2 managed servers for WSM.
The affected SOA1 managed server was working fine till last week and there were no changes made to the environment. Please let me know if I can furnish any further info.
Thanks!
Nidhi Gangadhar.
WebLogic PortalSOA Suite -
Hi!
The system prompts the following problem when I try to modify an Entity with regard to its attributes :
"CDI 21602 : Lock Failed - Do you want to re-read the row?"
This error has something to do with the repository. But I tried all possible ways in vain.
Thanks.
PS: Kindly also mark a copy to [email protected]
nullDear All,
Please advise, if you have this problem before.
Thank You and Best Regards
Fernand -
My client is experiencing a strange problem on DB2 OLAP Server 8.1(Essbase 6.5.1). On checking the Cache Memory Locking box in Application Manager under Database ->Settings, the display under Database->Information-> Storage tab shows Disabled when the database is running and Enabled when the database is stopped. I am not entirely sure what's happening i.e is Essbase using the Cache Memory Locking feature and is this just a display problem? Has anyone experienced this before? Any insight into resolving this?Thanks
As far my Knowledge Essbase Should allow you to change cache settings at any Given point of time, But the effect will take place only when the database is restarted.I worked on unix and win Nt/2000 and i never experienced this problem.i Suggest you to open a ticket with Hyperion and let them look into this issue.Thankssreenivas
-
When I try to use the Java plugin in Firefox, I get the following error:
java_vm: xcb_xlib.c:50: xcb_xlib_unlock: Assertion `c._xlib.lock' failed.
Could not read ack from child process
Plugin: Java VM process has died.
plugin: java process died due to signal 6
Could not start JavaVM!
VM did not start up properly
Trying to start the Control Panel also makes it yell about the failed assertion.
I've tried using different versions of Java (1.5.0_01 and 1.4.2_13), and recompiling xcb, but nothing changes. This is pretty far out of my league. Any help appreciated... thanks in advance.I entered the bug a few days before Christmas. I haven't received a reply yet, but it's still within the three-week reply period... it's got about a week left.
The Gentoo blog you linked to had a comment mentioning a bug in libXi being the problem, but grabbing the latest version didn't work for me. Maybe it's time to take a pencil and start pointing at random libraries to try upgrading. -
Error: Acquire running lock failed: 256
Can anyone help me? I did everthing that documentation says,but can't start my Virtual Machine .The error below picks up
Error: Acquire running lock failed: 256VM server and VM manager both on virtual box
Oracle VM 3.1.1 -
Hi!!!
I buy MSI KT3 ULTRA 2 and I have this problem...
When I start computer D-bracket signals that memory detection failed.I hear long signals.I shut computer and I unplug from electrical network.When I after plug all be ok!!!! I don't understand.Where is problem?
Motheboard? or incompability memory.
I Changed memory but problem stay.
Sorry for my English!!! )
Thank you everyone for answer!!!!
My hardware:
Duron 1,3 GHz
MSI KT3 ULTRA 2
256 MB PQI 333MHz
Geforce 2MX 400 32MB TV-out
PCI Radiolink Mediaforte SF2-PCR
Realtek 8139
DART TV LIVE
Sound Blaster Live 5.1
TEAC DVD 16x48
TEAC 32x4x4Hi,
Suggestion:
1. try different DIMM slots I did but not changed
2. try different RAM (you did already, ok :P )
3. try different power supply unit new 350W
4. go into the BIOS and set "Load BIOS Setup Default", leave the RAM settings default. -
Hi. So I am trying to help a friend with her laptop. It's a HP Pavilion g6-2330dx.
Product #: D1C01UA#ABA
Serial #: [Personal Information Removed]
Windows 8
ADATA 4GB RAM
Toshiba 640GB HDD from the looks of it.
The laptop is unable to boot into Windows, so I suspect the hard drive. But I ran the hard drive test and it passed all the tests. The SMART test and both the short and long test. I ran the tests multiple times and it passed each time. I tried reseating the hard drive and still no go. I also removed the HDD and connected it to my desktop PC to see if it detects and it did. Ran the Windows 7 own HDD test and it passed.
Currently, there doesnt seem to be any operating system at all on the HDD. When I check, there is a C: drive of ~90GB partition that is ~90GB free, but inside there are Windows files/folders. There is also a D: drive Recovery partition that says ~26GB with only ~2GB free, but when I go inside there's only ~350MB worth of data.
So then I ran the memory test (in BIOS) and it failed immediately. I reseated the RAM module. I tried the other slot. It still failed. So is it safe to say the memory is the cause of this problem?
Pressing the F11 key that is supposed to take me to the System Recovery only leads me back to the black screen with "No Boot Device. Insert boot disk and press any key"
I even tried to install Windows 7 to see if it'll work. I was able to get the laptop to boot/read off the Windows 7. But when I click to install, it asks for a boot device driver or something like that.
My friend doesn't have the recovery disk either. I guess she lost it.
Anyway, is it as simple as replacing the memory or could it actually be the HDD (even though it passes)?
EDIT: This is what the System Log in BIOS says
0021 Time: 10/13/2014
03F0 Time: 10/13/2014
03F0 Time: 10/13/2014
The date was the first time I ran the tests. I havent received those numbers (error codes?) since.
EDIT: Just for kicks, I ran Memtest 2.11 just now (forgot I had the disc) and it immediately went red with thousands of errors, hah.Hi bghs,
Welcome to the HP Forums!
It is a fantastic place to find answers and information.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that you were unable to boot into Windows, and you suspected the hard drive and tested it, but it passed both short and long test. With that being said and the fact that it also passed leads me to believe the hard drive is fine.
You tested the memory and it failed. You tried reseating and swapping slots but they still failed the test.
I would test each card individual with the memtest to determine if it is just one or both cards that have an issue.
When you installed it in another computer, you did see the recovery partition. Once the memory issue is resolved, if you are still unable to boot into Windows, I suggest you do a recovery with the minimized image. Here is a link to Performing an HP System Recovery (Windows 8) to assist you with that process.
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! -
Memory upgrade fail - Kernel panic after put old memories back
I People, this is my first post here and unfortunately is to report a problem, not to help friends.
I did an memory upgrade last weekend. After this, he will not boot normally, only in safe mode.
I discovered that they sent me 1333Mhz memories, and my mac (mid 2009) supports only 1066Mhz.
I put the old memories again, however I believe that the system did not recognize.
As you can see below, the system recognizes two modules:
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334448302D4348392020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
It is not true, I' using now 2 x 2GB, DDR3, 1067 Mhz (stock)
I tried to reinstall the system, but when I try, I got crash again.
how can I solve this issue?
Interval Since Last Panic Report: 5298 sec
Panics Since Last Report: 6
Anonymous UUID: EAEB74C4-4B23-BCC2-1A48-B6FEB255C9FF
Mon Apr 1 16:37:33 2013
panic(cpu 1 caller 0xffffff800e0876ab): "Spinlock acquisition timed out: lock=0xffffff8011bff270, lock owner thread=0x10d9fb0aa, current_thread: 0xffffff801f873000, lock owner active on CPU 0xffffffff, current owner: 0x10d9fb0aa"@/SourceCache/xnu/xnu-2050.7.9/osfmk/i386/locks_i386.c:363
Backtrace (CPU 1), Frame : Return Address
0xffffff80f54fbd10 : 0xffffff800e01d5f6
0xffffff80f54fbd80 : 0xffffff800e0876ab
0xffffff80f54fbdb0 : 0xffffff800e06256b
0xffffff80f54fbf40 : 0xffffff800e0b7f69
0xffffff80f54fbfb0 : 0xffffff800e0ce3d1
BSD process name corresponding to current thread: diskarbitrationd
Boot args: config="\OS X Install Data\com.apple.Boot" root-dmg=file:///OS%20X%20Install%20Data/BaseSystem.dmg
Mac OS version:
12A269
Kernel version:
Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64
Kernel UUID: 8D5F8EF3-9D12-384B-8070-EF2A49C45D24
Kernel slide: 0x000000000de00000
Kernel text base: 0xffffff800e000000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 8887270925
last loaded kext at 1689458563: com.apple.driver.AppleUSBTCButtons 235.4 (addr 0xffffff7f8f6c7000, size 20480)
loaded kexts:
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleIRController 320.15
com.apple.driver.AppleUSBTCKeyEventDriver 235.4
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.DiskImages.ReadWriteDiskImage 344
com.apple.driver.DiskImages.SparseDiskImage 344
com.apple.driver.DiskImages.UDIFDiskImage 344
com.apple.driver.DiskImages.FileBackingStore 344
com.apple.driver.DiskImages.HTTPBackingStore 344
com.apple.driver.DiskImages.RAMBackingStore 344
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.2.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleUSBHub 5.1.6
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AirPort.Brcm4331 600.15.20
com.apple.driver.AppleFWOHCI 4.9.5
com.apple.driver.AppleAHCIPort 2.4.0
com.apple.driver.AppleUSBEHCI 5.1.5
com.apple.driver.AppleUSBOHCI 5.1.5
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.DiskImages.KernelBacked 344
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.driver.AppleUSBMergeNub 5.1.5
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.driver.AppleMCP89RootPortPM 1.11
com.apple.iokit.IOAHCIFamily 2.2.0
com.apple.iokit.IOUSBFamily 5.1.6
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro7,1, BootROM MBP71.0039.B0E, 2 processors, Intel Core 2 Duo, 2.4 GHz, 8 GB, SMC 1.62f7
Graphics: NVIDIA GeForce 320M, NVIDIA GeForce 320M, PCI, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334448302D4348392020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353637334648302D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 11 devices, 0 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9500420AS, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0x24600000 / 2
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0x26100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06600000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8213, 0x06610000 / 7
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x06500000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0x06300000 / 2Hi BGreg,
I already reset the PRAM as you said.
I've cleaned the memory modules as indicated by Linc above.
Today I formatted my harddrive to try a clean install, but system crashs after 5%, 10%.
There is something making me worried:
In one of my tries, I opened the system view to check my actual hardware configuration, and to my surprise, the system shows me 8GB installed. Cannot be. I have 2 x 2GB.
Where my system stores this information? There is a way to reset it? I tried last hour install the snow leopard, that cames with my mac, by DVD, but does not worked too.
Thank you all so far.
Giuliano -
I have a WD 1TB external hard drive that I use as my time machine backup drive as well as to store a number of things including my iphoto library (due to its size of about 85 GB) as well as documents. I began using the WD 1TB external drive with my 2007 13" MacBook and when I purchased a brand new 13" MacBook Pro in 2013 I used the WD to transfer what I wanted to the new laptop. My new MacBook Pro is running OSX 10.8.4 (2.9 GHz Interl Core i7 with 8GB 1600 MHz DDR3) (not the retina display). The WD 1TB product # is WDBACX001... and it's only about one year old so I'm super bummed that it's failing and trying to take my life with it It has only ever been used with my two MacBooks, never with a PC.
The external WD was working fine until this week when I noticed that it wasn't appearing on my desktop. I rebooted, unplugged and replugged the WD drive in each USB portal, and still nothing. I ran Disk Utility to verify and repair the disk, which did force it to show up on the desktop again, though it made everything painfully slow. After running the repair function Disk Utility told me that the drive couldn't be repaired, and that I should backup whatever is on it and restore the WD drive. I managed to pull off most of the documents before it decided to freeze up my laptop (I had a couple of folders with a few documents each left), but I wasn't able to move the iphoto library over before the drive disappeared again. I got it back by running the repair option in disk utility, with the same message that the WD drive is failing and to back it up, and tried to move the iphoto library. It told me it would take 180+ days, and kept going up. I left it up anyway for about a day to see if it would change, and instead it gave an error message, and moved nothing. I can't open the library in iPhoto- it tells me it's on a locked disk. I checked the permissions and it's set to Read & write by me (the admin user) but then under that it says read only for "everyone." I can't get into the library to pull out my pictures, which I cannot afford to lose.
I would appreciate any help or advice on how to crack into my iphoto library on this failing drive to remove the pictures. I read a lot about DiskWarrior but I also read that it won't work on newer macs (anything after June of 2012 supposedly), so I'm wondering if that's true or not, and if not is that a good program to use?
I can't afford to take it to a professional right now, so any help or advice would be so greatly appreciated! Also if anyone then could suggest the best way to back up in two places (digitally and perhaps a better brand of external drive) it would be amazing.
If you need more info let me know!If you're very lucky, you might be able to salvage the drive mechanism, and the data, by removing it from the enclosure and installing it in another one, or in a drive dock.
-
Not sure exactly how, but I managed to contracted several variants of the nasty Rovnix virus and now my system will not even boot into Safe Mode after trying to restore to several different restore points. Enabled bootlogging, but not sure how to retrieve the log.
Currently am able to get into HP Advanced Diagnostics and began Start-Up Test. Test failed on Memory Module:
Failure ID: Q0AE6C-5LS79T-MFH15G-406N03
Any next steps or directional assistance would be greatly appreciated. Thank you in advance!Hello @GarrettBishop,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook computer has failed a memory test in the advanced system, and I would be happy to assist you in this matter!
Since the Failure ID has come up with Q0AE6C-5LS79T-MFH15G-406N03, I recommend contacting our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!
Maybe you are looking for
-
No option to save files, content/file type missing from Applications list
I want to be able to click a link to a file and have the option to Open the file with a specified application. When clicking on the file I want to Open with a specified application, I only get a Save or Cancel option. When I look in Preferences > App
-
How to give the parameter in a single line
hi, i am working on reports, i have declared the parameter as radio button, how to have the radio button in a single line. somethink like this radiobutton1, radiobutton2, ....
-
Hello, I am using JDev 10.1.3 and would like to change skin in my adf application. Help -> Check for updates -> Open Source and Partners -> Additional Skins for ADF Faces _10.1.3.*05*_ I am using JDeveloper 10.1.3.4. IS THIS OK? or is it that I canno
-
Can I change computer client agent properties using the command line ?
I need to make a script that will change some settings in several configuration manager 2007. The settings I have to change are: - policy polling interval - mandatory reminders Is it possible to use cmdlets or WMI classes to change these settings in
-
When will the "new iPhone" be released?
When will the "new iPhone" be released? A.k.a iPhone 5, 5G, 5GS, 5S, whatever. And what about the "new iPod touch" a.k.a iPodTouch 5. Thanks in advance.