MEREP_MON log error question on SYNCBO default values
Hello All,
I am getting some errors when I sync the MI Client on the Mobile DSD execution.
Error says the following :
"Default value missing: Value ID=MBLID, depends on=1, exclusive="
Default value missing: Value ID=USER, depends on=1, exclusive=
Looks like we need to give some default values for the DSD* and SPE* SYNCBO's What values we need to give over there. I think we cann't hardcode our Mobile device id and Mobile user id over there.
Please advise.
Thanks,
Greetson
Hi Greetson,
You are right when you say that you can't just go and manually add those values. They are setup when SyncBo is created, for userID, for example, it will be something like ME-SYNC_USER.
If you uploaded DSD SyncBos properly thse values should have been imported as well.
Try to upload SAP delivered set of SyncBos again (normally, there should be a SyncBo definition file in your application package).
If you have exported a SyncBo definition file yourself and then used this file to upload SyncBos in the other system - you didn't export "default values". There is a button "advanced" that has to be clicked on and then all checkboxes checked to get a complete SyncBo definition exported in a file.
Cheers,
Larissa Limarova
Similar Messages
-
Error while saving some default value in excel file
Hi,
I have been trying to accomplish a very simple task. I am trying to save values used in “PARAMETERS DESCRIBING PATH” of "Photo_Diode_N_Motors_DAQ" and want to reload the same values in “PD_Display_From_Spreadsheet”. There is a function named “Display to Motor” in “PD_Display_From_Spreadsheet” which will use four of those values namely y_intial, y_step_size, z_intial, z_step_size. Needless to say that I am not able to do successfully. Each time I am trying to run, I am getting following error:
“Error 1 occurred.
Possible reason(s):
LabVIEW: An input parameter is invalid.
NI-488: Command requires GPIB Controller to be Controller in Charge.”
However, if I remove the part where I am saving those values, it works fine.
You may like to have look at frame 1 of "Photo_Diode_N_Motors_DAQ" as well as use of “Display to Motor” in “PD_Display_From_Spreadsheet”.
Thanks,
Dushyant
Attachments:
Program.zip 418 KBHello,
No problem about the help, I am glad to have helping you get rid of the problem! I think I see the dialog your are referring to now. Is it the one that asks the user to replace the file? If so, this is because when the file already exists, the default behavior of the File Open/Create/Replace funtion (used inside the Write to Spreadsheet File.vi) is to show "advisory dialogs." You can turn those off though, if you'd like, by wiring the boolean input within the Write to Spreadsheet File.vi. I have attached a version of that Write to Spreadsheet File with Advisory Selection.vi called, and used it in a new version of the test VI you sent. Together, they give the behavior of writting a file you choose (say MyFile.txt) with the front panel control, as well as a file named with _new appended to it (say MyFile_new.txt). By exposing the underlying advosory boolean, we can supress or expose such dialogs in all instances you wish.
Was that the dialog problem? Try the VIs attached in the zip file!
Best Regards,
JLS
Best,
JLS
Sixclear
Attachments:
slightly modified VIs.zip 32 KB -
USOBT_C almost empty after changing default values with SU24
After the implementation of OSS Notes 0001378328, 0001382895 and 0001404093 I performed a change in SU24 on the default values of authorization object (2nd tab) S_ALV_LAYO for all transactions involved.
I filtered all transactions with default value u2018Yesu2019 for this object and selected all these entries and changed them to u2018Nou2019.
When creating new roles afterwards I noticed that no objects were pulled in in PFCG and when checking table USOBT_C I noticed that, apart from the 328 records I changed to No for S_ALV_LAYO the whole table was empty! In the development client there are now just 328 records in this table whereas in de acceptance client there are 233,124 entries!
Could you please find out the following:
- How could this happen?
- What can I do to restore table USOBT_C?
I reported this bug also on OSS but maybe someone of you has had the same experience and can share the causes and solutions.
Thank you!
Lodewijk Borsboom> > To read such a huge text in the above suggested notes may become tiresome of not ofcourse worthless.
> What is the use of posting a list of links or randon OSS note hits, when you are not sure whether they are usefull or not?
>
hmm.... though I am not sure and agree with the raise of OSS message for this issue, but when I read these notes after reading the query I found them to be notified to op.
> Lodewijk can do that simple search himself. I always assume that the person asking a question has done a search before hand...
>
Agreed again. But not sure of his search result. May be his string missed some of these notes and can help him to check the program errors rectified in couple of Notes in 2009. But of course I confess about the uncertainty of the exact solution from my side.
> If it is a basic requestion and easy answer with a link, then I delete it. It has no value to SDN. You are just attempting to do someone else's work for them, and that it not the case here.
>
> Please read the question carefully and answer specifically.
>
read and then posted the message. Also as I was not sure of solution to this particular error I surrendered in advance [mainly for you ]. Still I would like op to view the following notes on SAP Default value maintenance and if he has already done then that is great and I am just not helping with proper suggestion.
[Note 1287998 - Problems when you maintain default authorization values|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1287998]
[Note 1378328 - SU24: Error after deleting authorization default values|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=1378328]
Note 1382895 - SU24|Default value maintenance for authorization objects
Note 1235912 - SU24|Display and maintenance of authorization default values|
Hi Lodewijk,
Did you check the change header for USOBT_C in CDHDR and CDPOS? Also let us updated with the reply from OSS please.
regards,
Dipanjan -
Default value for variable are not within permitted value range (precalc)
Hello BW community
Issue:
I have created a variable (Characteristic Value/ Manual input-default value) and use the precalculated value set (details-basic settings). In the further variable definition I could select the precalculated value set in 'Default values', which I have defined beforehand in the broadcaster..
The precalculated value set in the broadcaster settings is just based on a master data query on 0CUSTOMER.
Error:
The variable gets the error E991/R9E Errors: Default values for variable 'XXX' are not within permitted value range.
The detail description of the error is: You defined default values for variable 'Sold-to party precalc value set for manuel input' that are not appropriate for the variable type; for example, a range is defined as a default value for a variable that only permits a single value.
So please has someone had the same issue and found out how to solve it? It would be excelent to get good solution for this issue.
Best regards and thanks
Christian
PS-1: System BW 701 / SAPKW70105
PS-2 : there has been a SDN entry with the same topic but not resolved too.
link: /thread/980839 [original link is broken]Hello,
Thanks for your response.
I should have mentioned that in my post. I tried this very first time. I thought that this is the place where you provide default value. But I got following exception at that time, so I thought, may be this is used for something else.
<LifecycleImpl> <_handleException> ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6
javax.faces.FacesException: javax.servlet.ServletException: OracleJSP error:
oracle.jbo.NameClashException: JBO-25001: Object viewAllInd of type Control Binding Definition already exists.
at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:415)Do I need handle something else when you put the default value?
Thanks,
Jai -
To maintain default values in generation of operation
HI Experts
While converting planned orders co41 planned orders are not getting converted to production orders.The error is no default values maintained for generation of operation
1)There are different order types hence in OPPQ we cannot maintain single order type
2)There is routing for the material but why the error is showing "no default values maintained for operation generation"
Any suggestions to resolve the issue
Regards
venkatHi experts
Thanks all for ypur suggestions and prompt replies.The issue is resolved
The problem is there are 3 operations in routing and there is object dependencies for the operations and since there is error in procedure and based on that the routing is getting selected when we convert planned order to production order.Since there is error in selection condition the system could not pick up the routing and planned order is not converting to production order and hence the system is throwing message no defaut value maintained for operation generation.
venkat -
Default value at Account Object Field setup
Hi,
How to give default value as ‘On Demand’ for the Source field at the time of Account creation and also we need to bypass this default value if the channel is web service and data import. This default should only effect if it is being done from OD UI.
I added below expression in DefaultValue
([<IndexedPick5>] = LookupValue("OCC_INDEX_CUST_LOV_ACCOUNT_5","On Demand")) AND (ExcludeChannel(‘Web Services’)) AND (ExcludeChannel(‘Import’))
but it giving an error as below when clicking New button in Account Object:
1] An error occurred calculating the default value for field 'Indexed Pick 5' in business component
'Account'.(SBL-DAT-00412) [2] Could not evaluate expression 'Expr: 'LookupValue([<IndexedPick5>],"On Demand") OR (ExcludeChannel(‘Web Services’))'' for field 'Indexed Pick 5' in business component 'Account'.(SBL-DAT-00394) [3] CSSString doesn't support operator 'OR'(SBL-DAT-00479)
Thanks
BobTry the following.
IIf(ExcludeChannel(‘Web Services’) or ExcludeChannel(‘Import’), 'On Demand', '')
Cheers!
Shilei G -
How we can find out the default value of the initialization parameters
Hi All,
How we can find out the default value of the initilization parameters from oracle database.
Thanks
ShijuHi,
you can find currently used parameter values v$parameter and v$parameter2.
if default values is different real values then you can see alert.log.
because in alert.log you will see non default values, rests is default.
Edited by: admin on May 8, 2010 3:41 AM -
Error 1406 : could not write value to key \software sql server installation
I've problems installins SQL Server with management studio
I tried different steps starting from
Changing permissions of the local user while running both registry editor and installer with adminstrator
i've checked most similar posts here in the forums and followed their steps but no progress ,
this is the error message
i couldn't resolve it till now , i'm in this problem for 4 days till now tried different suggestions but no progress , i'm in a hurry , so please help me
Regards,
OmarOverall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068052610
Start time: 2014-08-05 23:21:36
End time: 2014-08-05 23:29:12
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for Adv_SSMS: Use the following information to resolve the error, and then try the setup process again.
Next step for SSMS: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: OMAR
Machine processor count: 8
OS version: Windows 8
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2014 Client Tools Connectivity
1033 12.0.2000.8 No Yes
SQL Server 2014 Client Tools Backwards Compatibility
1033 12.0.2000.8 No Yes
SQL Server 2014 Client Tools SDK
1033 12.0.2000.8 No
Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: E:\Sources\SQL Server with management studio\SQLManagementStudio_x64_ENU\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SSMS, ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140805_232135\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Management Services
Component error code: 1406
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140805_232135\sql_ssms_Cpu64_1.log
Error description: Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40WriteRegistryValues%401406
Feature: Management Tools - Basic
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Management Services
Component error code: 1406
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140805_232135\sql_ssms_Cpu64_1.log
Error description: Could not write value to key \SOFTWARE. Verify that you have sufficient access to that key, or contact your support personnel.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40WriteRegistryValues%401406
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140805_232135\SystemConfigurationCheck_Report.htm -
Post Author: adriananderegg
CA Forum: Xcelsius and Live Office
Dear all,
I use a filter element with 3 elements. My question concerns the default value, the values which are selected after loading. I can't figure out any logic behind the values XCelsius uses.
Does anybody know which values are selected? I couldn't find anything in the manual.
Thanks, AdrianPost Author: srikanth kandukuri
CA Forum: Xcelsius and Live Office
Hello Adrian,
I could not get to your query correctly, can you just explain me with a small example and i hope i can get you the much better answer then.
thanks, bye. -
Hi All,
I am new to Siebel and installed Siebel 8.1.1.11 on RHEL 5.5 (64 bit). Everything is fine Siebel server and gateway server are up and running but i am unable to open login page.
Login Error : The server you are trying to access is either busy or experiencing difficulties. Please close the Web browser, open a new browser window, and try logging in again.[15:36:09]
Siebel Server log file error :
GenericLog
GenericError
1
00006c5c52eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6352eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6452eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6552eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6652eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c7152eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c8052eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c8152eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c9052eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c9152eb6e6f:0
2014-01-31 13:06:04
(sccitems.cpp (310) err=2555932 sys=0) SBL-SCM-00028: Key not found
GenericLog
GenericError
1
00006c9152eb6e6f:0
2014-01-31 13:06:04
(sccconfg.cpp (2149) err=2555932 sys=0) SBL-SCM-00028: Key not found
I can connect to Siebel Server manager using command as : srvrmgr /g 192.168.0.163 /e Sieb81 /u SADMIN /p SADMIN
ODBC connectivity is also ok and i can connect as : ./odbcsql /source Sieb81_DSN /u SADMIN /p SADMIN
While installing Siebel i had left one step i .e.. creation of siebenv.sh using CreateSiebSrvrEnvScript because i got error when executed this script as :
Execution command : ./CreateSiebSrvrEnvScript /u01/siebel/ses/siebsrvr 192.168.0.163:2320 ENU Oracle
Error : cp: cannot copy a directory, '/u01/siebel/ses/siebsrvr/locale/' , into itself , '/u01/siebel/ses/siebersrvr/locale/C/locale'
Please suggest me what to do because if i want to configure again the same issue with CreateSiebSrvrEnvScript.
Message was edited by: Prabhakar2991Hi Prameela,
You can see all application objects are online and running. One more thing I have also checked ODBC is also working fine. I mean , user SADMIN can connect using ODBC.
=====================================================================================================================================
[oracle@siebel163 siebsrvr]$ srvrmgr /g 192.168.0.163 /e Sieb81 /u SADMIN /p SADMIN
Siebel Enterprise Applications Siebel Server Manager, Version 8.1.1.11 [23030] LANG_INDEPENDENT
Copyright (c) 1994-2012, Oracle. All rights reserved.
The Programs (which include both the software and documentation) contain
proprietary information; they are provided under a license agreement containing
restrictions on use and disclosure and are also protected by copyright, patent,
and other intellectual and industrial property laws. Reverse engineering,
disassembly, or decompilation of the Programs, except to the extent required to
obtain interoperability with other independently created software or as specified
by law, is prohibited.
Oracle, JD Edwards, PeopleSoft, and Siebel are registered trademarks of
Oracle Corporation and/or its affiliates. Other names may be trademarks
of their respective owners.
If you have received this software in error, please notify Oracle Corporation
immediately at 1.800.ORACLE1.
Type "help" for list of commands, "help <topic>" for detailed help
Connected to 1 server(s) out of a total of 1 server(s) in the enterprise
srvrmgr> list components
SV_NAME CC_ALIAS CC_NAME CT_ALIAS CG_AL IAS CC_RUNMODE CP_DISP_RUN_STATE CP_STARTMODE CP_NUM_RUN_TASKS CP_MAX_TASKS CP_ACTV_MTS_PROCS CP_MAX _MTS_PROCS CP_START_TIME CP_END_TIME CC_INCARN_NO CC_DESC_TEXT
siebelsrvr BusIntBatchMgr Business Integration Batch Manager BusSvcMgr EAI Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr BusIntMgr Business Integration Manager BusSvcMgr EAI Batch Not Online Auto 0 20 0 1 2014-01-29 02:48:30
siebelsrvr SCCObjMgr_enu Call Center Object Manager (ENU) AppObjMgr CallC enter Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr CustomAppObjMgr_enu Custom Application Object Manager (ENU) CustomAppObjMgr EAI Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr DQMgr Data Quality Manager Dqmgr DataQ ual Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr EAIObjMgr_enu EAI Object Manager (ENU) EAIObjMgr EAI Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr InfraEAIOutbound EAI Outbound Server BusSvcMgr EAI Batch Not Online Auto 0 20 0 1 2014-01-29 02:48:30
siebelsrvr EIM Enterprise Integration Mgr EIM EAI Batch Online Auto 0 5 2014-01-29 02:48:30
siebelsrvr FSMSrvr File System Manager FSMSrvr Syste mAux Batch Online Auto 0 20 1 1 2014-01-29 02:48:25
siebelsrvr GenTrig Generate Triggers GenTrig Workf low Batch Online Auto 0 1 2014-01-29 02:48:30
siebelsrvr JMSReceiver JMS Receiver EAIJMSRcvr EAI Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr MqSeriesAMIRcvr MQSeries AMI Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr MqSeriesSrvRcvr MQSeries Server Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr MSMQRcvr MSMQ Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr SMQReceiver SMQ Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr SServiceObjMgr_enu Self Service Object Manager (ENU) AppObjMgr CallC enter Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr ServerMgr Server Manager ServerMgr Syste m Interactive Running Auto 2 20 2014-01-29 02:48:20
siebelsrvr SRBroker Server Request Broker ReqBroker Syste m Interactive Running Auto 25 100 1 1 2014-01-29 02:48:20
siebelsrvr SRProc Server Request Processor SRProc Syste mAux Interactive Running Auto 2 20 1 1 2014-01-29 02:48:25
siebelsrvr SvrTblCleanup Server Tables Cleanup BusSvcMgr Syste mAux Background Running Auto 1 1 2014-01-29 02:48:25
siebelsrvr SvrTaskPersist Server Task Persistance BusSvcMgr Syste mAux Background Running Auto 1 1 2014-01-29 02:48:25
siebelsrvr AdminNotify Siebel Administrator Notification Component AdminNotify Syste mAux Batch Online Auto 0 10 1 1 2014-01-29 02:48:25
siebelsrvr SCBroker Siebel Connection Broker SCBroker Syste m Background Running Auto 1 1 2014-01-29 02:48:20
siebelsrvr WorkActn Workflow Action Agent WorkActn Workf low Background Online Auto 0 5 2014-01-29 02:48:30
siebelsrvr WorkMon Workflow Monitor Agent WorkMon Workf low Background Online Auto 0 5 2014-01-29 02:48:30
siebelsrvr WfProcBatchMgr Workflow Process Batch Manager BusSvcMgr Workf low Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr WfProcMgr Workflow Process Manager BusSvcMgr Workf low Batch Not Online Auto 0 20 0 1 2014-01-29 02:48:30
siebelsrvr WfRecvMgr Workflow Recovery Manager BusSvcMgr Workf low Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eChannelCMEObjMgr_enu eChannel Power Communications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eCommunicationsObjMgr_enu eCommunications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eCommWirelessObjMgr_enu eCommunications for Wireless Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eCustomerCMEObjMgr_enu eCustomer Power Communications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eEnergyObjMgr_enu eEnergy Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eMediaObjMgr_enu eMedia Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eEnergyOGCObjMgr_enu eOil Gas & Chemicals Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eSalesCMEObjMgr_enu eSales Power Communications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eServiceObjMgr_enu eService Object Manager (ENU) AppObjMgr CallC enter Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
37 rows returned.
srvrmgr>
=======================================================================================================================================
Please suggest me what to do.
Thanks
Prabhakar -
I recently ported my project to a new PC. Everything seems to run fine uncompiled, and I am able to build an executable without issue. However, my build specification shows up in the project explorer with question mark next to it. When I try to build again or edit the properties I get a popup with the information below:
Error 7 occurred at Get LV Class Default Value.vi
Possible reason(s):
LabVIEW: File not found. The file might be in a different location or deleted. Use the command prompt or the file explorer to verify that the path is correct.
=========================
NI-488: Nonexistent GPIB interface.
Complete call chain:
Get LV Class Default Value.vi
AB_UI_Initialize_Framework.vi
AB_UI_FRAMEWORK.vi
AB_Item_OnDoProperties.vi
AB_Item_OnDoProperties.vi.ProxyCaller
LabVIEW attempted to load the class at this path:
<Empty Path>
I've seen messages from people getting the same error when trying to run a compiled executable, but mine actually runs fine. I am just unable to open the build specification to rebuild or edit its properties.This application is for a Windows machine, and I am not using the Report Generation Toolkit. However, I shut down my computer last night and when I booted it up this morning my Build Specification now opens fine and I am able to edit it. My only thought as to why it occured in the first place is that I had added several files to user.lib and instr.lib and restarted LabVIEW, but it appears that it required my computer to be restarted as well.
-
Runtime error with column default value settings
I have one SP2010 (enterprise) document library which gives me a runtime error if I click on "column default value settings" in the settings. Other document libraries' column default value settings are working fine. I use managed metadata
and created libraries from templates. I deleted all custom columns from the site, only title is left over (content types are document and link to a document) but runtime error still shows up. How can I fix this?
Server Error in '/' Application.
Description:
An application error occurred on the server. The current custom error
settings for this application prevent the details of the application error from
being viewed remotely (for security reasons). It could, however, be viewed by
browsers running on the local server machine.
Details: To enable
the details of this specific error message to be viewable on remote machines,
please create a <customErrors> tag within a "web.config" configuration
file located in the root directory of the current web application. This
<customErrors> tag should then have its "mode" attribute set to
"Off".
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes:
The current error page you are seeing can be replaced by a custom error page by
modifying the "defaultRedirect" attribute of the application's
<customErrors> configuration tag to point to a custom error page
URL.
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
Runtime ErrorThanks for your suggestions. I found the log but don't know what it means. Can anybody help?
System.ArgumentOutOfRangeException: startIndex cannot be larger than length of string. Parameter name: startIndex
at System.String.InternalSubStringWithChecks(Int32 startIndex, Int32 length, Boolean fAlwaysCopy)
at Microsoft.Office.DocumentManagement.MetadataNavigation.PerLocationViewManager.HumanReadablePath(SPList list, Guid fieldId, String uniqueNodeId, String pathDelimiter)
at Microsoft.Office.Server.WebControls.MetaDataNavTree.TreeViewDataBound(Object sender, EventArgs e)
at System.Web.UI.WebControls.BaseDataBoundControl.OnDataBound(EventArgs e)
at System.Web.UI.WebControls.HierarchicalDataBoundControl.PerformSelect()
at Microsoft.Office.DocumentManagement.MetadataNavigation.MetadataNavigationContext.OnTreeViewLoad(SPTreeView spTreeView)
at Microsoft.Office.Server.WebControls.MetaDataNavTree.PerLocationPageLoad()
at Microsoft.Office.DocumentManagement.Pages.ColumnDefaultsPage.OnLoad(EventArgs e)
at System.Web.UI.Control.LoadRecursive()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) -
MEMASSIN TCode, Error Message, Default values??
Hello SAPients!
I'm an ABAP Developer, I don't know much about MM configuration but I have to solve this problem: We are using MEMASSIN TCode to massively update the Purchasing Info Records the problem is that in the end the system shows this error message "Enter a min. order qty. that is less than the standard order qty." and the Info Record is not updated, if I use ME12 I can see that the Min. Order Qty is defaulted to 10000 and the Standard Order Qty. is defaulted to 1, so, apparently it is correct for the system to trigger that error.
My question would be, Where are ME12 and MEMASSIN TCodes taking the default values from? How can I change those default values to something that allows MEMASSIN to update the Info Records correctly?
Thanks in advance for your kind help.MEMASSIN and ME12 are both change transactions, so the values are just the values that are already entered.
You should be able to see them in table EINE.
I dont know how you loaded/entered the info records...
Maybe it was loaded with own programs and these fields were not validated at that time, or it was a warning message that was turned into an error message after that info record was created.
The question is just: what do you want to do?
do you want it leave this way, or do you want to correct the standard order quantity to be at lease equal to the minimum order quantity.
If you want to leave it wrong and just mass change other fields, then you have to make the error message a warning only.
If yo want to correct the quantity, then you can do this directly in MEMASSIN.
You said you are an ABAPer, so it should be easy for you to populate a new standard value with a small coding, which can be entered behind when you click formula icon -
I have a program written which uses the print report function. Everything works fine in the uncompiled code, my report prints just fine. I can compile my project all the way to a full installer. When I run the executable I get the error:
Error 7 occurred at Get LV Class Default Value.vi
With the following text:
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
Complete call chain:
Get LV Class Default Value.vi
NI_report.lvclass:New Report.vi
print report.vi
EMS V3.0 streamline.vi
LabVIEW attempted to load the class at this path:
H:\InMotion\EMS\builds\EMS_01\Emissions Analyzer\EMS.exe\1abvi3w\vi.lib\Utility\NIReport.llb\Standard Report\NI_Standard Report.lvclass
"EMS V3.0 streamline.vi" is my main vi, "print report.vi" is the subvi that creates and prints the report based on all the information sent to it. I get no warning when I compile this to an executable. I already tried repairing both LV SP1 and the report generator toolkit. No change after I compile to an exe.
Any help would be appreciated. Thanks.
Garrett HerningOk, I tried that... and now I get an error when I try to compile to an executable... This is right at the end of the build and will not let me build an executable.
Error:
An error has occurred. Expand the Details section for more information.
Details:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 7 occurred at Invoke Node in AB_Build.lvclass:Copy_Files.vi->AB_Application.lvclass:Copy_Files.vi->AB_EXE.lvclass:Copy_Files.vi->AB_Build.lvclass:Build.vi->AB_Application.lvclass:Build.vi->AB_EXE.lvclass:Build.vi->AB_Engine_Build.vi->AB_Build_Invoke.vi->AB_Build_Invoke.vi.ProxyCaller
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS X, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Non-existent board.
Method Name: Linker:Write Info To File -
ORA-01400 error on a mandatory column with Default value
Hi,
I have got a mapping, which is loading from one view to a target table. In the target table there is a column which is marked as "NOT NULL" also has got Default value. But my mapping is failing with ORA-01400 error.
Could you please guide me which setting in the mapping will make it load the default value in the target column?
Regards,
Samujjwal BasuI should add - I guess I can always put my own custom process in to replace the DML. Just seems like a simple thing - if the value doesn't appear on the debug, isn't set with any default value... don't include it in the DML.
Maybe you are looking for
-
I have lost my install cd for the adobe acrobat 9 standard, and I need to order another one or download it online. I have my serial number. Where can I do one of these things? thanks Tom
-
Error on extend an internal table, but the required space was not available
Hi All, I am trying to retrieve cost data from COVP tables, as well as the quantity, cost centre, and price unit fields from MSEG / BSEG tables. Thing is, if the AWTYP value in COVP table = 'MKPF', i have to get the data from MSEG, otherwise, I need
-
Refreshing Library Contents and Thumbnails
After importing RAW photos into iPhoto, I made some changes and deletions in Adobe Photoshop CS2's Camera RAW program. These changes did not show up in the iPhoto library even though the photos are no longer in either the Originals or Modified folder
-
Am having issues with using Adobe Reader X. Have been getting the Runtime Library Error message box. What do I need to do to resolve this issue?
-
How can I undo a back up that combined the contact info from 2 different phones
how can I undo a back up that combined the contact info from 2 different phones.