Message after update

Hi,
 after the update of the switch-3750X c3750e universalk9 tar.150-2.SE5  to  c3750e universalk9-tar.150-2.SE7 , I have a message
ADJ-3-RESOLVE_REQ: Adj resolve request: Failed to resolve x.x.x.x GigabitEthernet1/0/1
thank you!  if someone's solution,

Its a known issue for that software version  , implement this
no ip cef optimize neighbor resolution

Similar Messages

  • Experiencing issues sending/receiving MMS messages after updating to iOS 6

    I, like so many others, have been experiencing problems sending/receiving MMS messages after updating to iOS 6.  Other than that, I really do like the new update.  I have an iPhone 4S with Verizon.  I have been to Verizon, and the issue is not with my plan; it is definitely with the update.  My friend updated her phone also, but her phone is just the iPhone 4.  She does not experience these issues.  Is Apple aware and trying to fix the problem?  It is soooo frustrating!  I cannot send/receive picture messages, nor can I send/receive group messages.  ---  Has anyone come up with a solution to fix it yet, or is it something that Apple will have to do? 
    Thanks in advance. 

    I also am having the same problem. I can't send a pic to anyone who doesn't have iMessage. Also, I don't always get the alert when I have a new message. I never had this problem before I updated to IOS 6. I have AT&T & an iphone4. It's isn't jail broken. I've been reading forums for a couple weeks now and apparently it has something to do with the apn. And I don't know how or even if I can change it. Then I also read it might have something to do with a damaged SIM card. And it might have been damaged when we updated. But those are just theories.

  • Unable to send or receive text messages after updating iOS to 7.0.2

    I am unable to send or receive text messages aftering updating to iOS 7.02. I have an iPhone 4S. I have run all the suggested troubleshooting still can't text. I have been to my carrier, AT&T, there is no issue with my account. AT&T suggested resetting the phone to factory defaults (thereby wiping it clean). I am trying to avoid that as I had issues with transferring data & contacts before. Any one have a work around?

    Try this iMessage workaround
    Look for a fix by Apple by the end of the week.....

  • Issues with sending text messages after updating to 8.1

    I having problems sending text messages after updating to 8.1, get a message saying Message Send Failure. I have an Iphone 5s.

    Hi CWH52,
    Thanks for visiting Apple Support Communities.
    If you have not been able to send text messages after updating to iOS 8.1, you can find some helpful troubleshooting steps in the "If you can't send and receive SMS" section of this article:
    iOS: Troubleshooting Messages
    The steps found here can help resolve many issues that affect your ability to send text messages.
    All the best,
    Jeremy

  • HT1338 debugger called panic message after updating computer is now stuck?

    debugger called panic message after updating my macbook pro...computer is stuck

    Attempt to boot into Safe Mode If it does, download and run this app: http://www.etresoft.com/etrecheck
    Post the results.
    Also, open Console, click on System Diagnostic Messages in the log list, and see if the Kernel Panic log is there. If so, copy and paste the results here.

  • Ive lost all contacts and messages after updating to ios5 ??? Help

    Ive lost all my Contacts and messages after updating to ios5 ??? Help
    How can I get them all Back ???

    Have had the same issue - and conflicts between PC, Ipad and Iphone.  Gained 6000 names and lost contacts or contact contents.  Have had to edit on PC.  Spoke with Apple Express and was advised to do editing only on PC and then sync.  Was also told not to use Icloud until problems had been solved.  Have spent last two weeks recreating my contacts list.
    Haven't yet bothered to reclaim my missing paid ring tones.

  • Adobe Photoshop CS2 Error messages after update to mac os 10.4.6

    After updated to mac os 10.4.6 everytime I use Photoshop CS2 I receive an error message "Could not complete your request because of a program error"
    I did all the workarounds that were described in document 331627 from Adobe's website and nothing worked.
    I also subscribe to maxosx.com support and someone suggested removing the legal.localized/Tien...file from the photoshop cs2/legal directory, but everytime I tried to select the directory "legal" from within the finder view, it disappeared and closed the finder window.
    HELP!

    Did you upgrade from a previous version of OS X like 10.3.x or 10.2.x or from a prior version of 10.4.x? If the former, there are probably some files in your previous system folder that need to be restored.
    Otherwise, double click Photoshop when it's closed, and then IMMEDIATELY hold Command + Option + Shift. You'll get a box for resetting the settings. Select Yes and maybe that will help.
    --Ryan

  • I cannot search through messages after updating to IOS 6.1.2

    After updating to IOS 6.1.2 i cannot search for messages

    Hello jrobbertse,
    I use the search feature in Messages often, and I would be concerned if it wasn't working as well.  I found some steps you can take to help resolve this issue:
    Frozen or unresponsive iPhone
    http://www.apple.com/support/iphone/assistant/phone
    The article is for a frozen and unresponsive iPhone, so the step to recharge the iPhone is not relevant to you.  All the other steps in the article would apply to your situation though.  Before you go through the step to "Restore iPhone," you should definitely back up the contents of your iPhone:
    iOS: How to back up
    http://support.apple.com/kb/HT1766
    I hope this helps! 
    Best,
    Sheila M.

  • App Store update button displays bug message after updating, iOS 6.0

    In iOS 6.0, after updating an app in the App Store, a weird message appears on the update button.
    The button remains active giving the choice to update twice or more.

    Dude there are many bugs in ios 6 it is not safe to use.

  • Error message after updating Nokia Browser.

    In my Nokia X2-02, after updating Nokia Browser, it gave me an error message: Conflicting applications, Show items?
    Please fix this bug, as I have tried resetting all settings and updating the software via PC.
    Any Idea?
    Solved!
    Go to Solution.

    This is a known problem which happens sometimes: there's a new versio of browser available, but  the application get corrupted during the download/installation of the app and stops working. Updating the device SW with Nokia Suite does not unfortunately fix the problem.. The only sure way to have the issue fixed would be to take the phone to a Nokia Care service point for refurbishing. http://www.nokia.com/global/support/locations/
    Another possible workaround for the problem is to use e.g. Opera Mini instead of Nokia Browser. (you can install it with Nokia Suite even though the Nokia Browser on your phone is now non-working). 
    I have tried to push Nokia to release a new SW update for most device models which would correct the issue without the need to refurbish the device at a Care Point, but the latest conclusion was that the problem does not occur frequently enough to create such fix... Except for a few very latest devices should be getting it in near future
    http://www.microsoft.com/en/mobile/nokia-x-updates/
    http://www.microsoft.com/en/mobile/nokia-x2-update/
    http://www.microsoft.com/en/mobile/asha-software-update/
    http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/
    http://www.developer.nokia.com/Community/Wiki/Nokia_firmware_change_logs
    https://twitter.com/LumiaSWUpdates

  • Battery messages after update to firmware 4.2.1

    Hello. I've a question about the performance of the battery messages/icon after updating from 3.2.2 to 4.2.1 It worked fine in 3.2.2 (push notifications when reaching 20% of charge and icon changig from white to red); now it doesn't show the alert message and the icon keeps white. Something curious: if you install any iphone applications from iTunes, the icon is red when you run it (of course with the battery under 20%) but when you leave it turns white...
    Restored several times (in fact at least four times) and it's always the same. As I said, it did work with 3.2.2
    Anyone else?
    Thank you and regards

    Yes, the percentage is ok (that's why I know the battery icon is not working)
    Other ideas? Someone else with the same problem?
    Thank you

  • HT5654 message after update app. failed to start because MSVCR80.dll wasn't found

    I had a message to upgrade my version of Itunes so I clicked on the button to do this. During the download it stopped, coming up with an error message stating "This app failed to start because MSVCR80.dll was not found reinstall may fix problem" then after clicking on ok I get another box with the message "Error 7 (windows error 126)".
    I have tried uninstalling every apple application I have then reinstalling them and still get the same message. Can anyone help?
    Frustrated

    Solving the iTunes Installation Problems in Windows
    1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
    2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

  • Window - No Disk error message after update to iTunes 7.1

    I updated to iTunes 7.1. After turning on iTunes for the first time after the download, I get a box that says "Updating iTunes Library". During this process, I get the dreaded error message: "Windows - No Disk" I clicked on it a few times and it went away. Then it came back and no amount of clicking would make it go away. At this point, iTunes no longer responds. I have gone thru this process now about 5 times.
    What is the fix?
    Does Apple answer this issue anywhere or is it left to its customers to speculate about this stuff?
    Thank you fellow consumers.
    David
    dell laptop   Windows XP  

    Do you mean like it says Windows-No Disk in Drive, please insert a disk? That type of message?
    Rachyl

  • I lost all my text messages after updating to iOS6... PLEASE HELP!!

    I just upgraded to iOS6 on my iPhone 4 and all my text messages are gone. I always do a backup before any major OS update. Everything is there (Pictures, Contacts, Voicemail, etc.) except for my text messages. After searching around, it seems like a bug that many people are experiencing. I have still yet to find a fix? Anyone able to get them back?

    I dont think there is a fix available.
    Posted my response here - https://discussions.apple.com/message/19792359#19792359

  • Issue with lost messages after updating....

    I was wondering if anyone could shed some light on the following....
    I recently (...regretfully) completed the software update to v 20.0.019 via PC suite...before the update I made a back up of ALL files onto my SD card, which according to my backup options should include settings, messages, contacts etc... I then removed my SD card to complete the update for safety measure...After the update was completed, all of my messages had been deleted from my inbox, and when I came to restore my files from the SD card, everything but my messages were restored!!! :'( They were non-existent!!!! Why?
    I've attempted setting the messages to store onto the E: Mass Memory drive then doing the restore from the memory card, but nothing...
    Also when I try to restore my messages, the restoration is incomplete and an error message pops up which says "unable to access the file. messages will be stored onto phone memory"
    My memory card is an 8GB card and my phone currently says that 1.7 GB of this memory is in use, but I have nothing else saved on the memory card so I think the data file from that backup is saved on there, but I can't seem to access it.......could it be due to the software being incompatible with the messages or vice versa??
    Is there any method of retrieving them? Please Help!!!

    dude if you rearrange the one app that's by itself onto a page that's not full, the iPhone will recorrect itself and delete the 'blank' page of non apps.
    To the left is the search page.. to the right its all your apps.

  • "server starting up" message after update

    Hi All,
    I've just updated my server from 10.6.5 to 10.6.7 and upon restart I can't connect to my wikis or blogs. I just get a grey screen and a spinning wheel saying "server starting up". I have tried the Apple solution listed here, as I do host my Collaboration folder on a sperate volume:
    http://support.apple.com/kb/TS3757
    and the post from Tarnyinc
    https://www.tarnyinc.com/groups/trainingcenter/weblog/03f55/Wiki__Blog_Surprise_ for_1064_Update.html
    but to no avail.
    Here is the last output from the wikid error log
    2011-05-26 14:15:19+0100 [-] Main loop terminated.
    2011-05-26 14:15:19+0100 [-] Server Shut Down.
    2011-05-26 14:15:55+0100 [-] Log opened.
    2011-05-26 14:15:55+0100 [-] twistd 8.2.0 (/usr/bin/python 2.6.1) starting up.
    2011-05-26 14:15:55+0100 [-] reactor class: twisted.internet.selectreactor.SelectReactor.
    2011-05-26 14:15:55+0100 [-] Current log level is warn
    2011-05-26 14:15:55+0100 [-] twisted.web.server.Site starting on 8086
    2011-05-26 14:15:55+0100 [-] twisted.web2.channel.http.HTTPFactory starting on 8087
    2011-05-26 14:15:55+0100 [-] Starting
    2011-05-26 14:15:56+0100 [-] Unhandled error in Deferred:
    2011-05-26 14:15:56+0100 [-] Unhandled Error
        Traceback (most recent call last):
          File "/usr/share/caldavd/lib/python/twisted/application/service.py", line 278, in startService
            service.startService()
          File "/usr/share/wikid/lib/python/apple_utilities/service.py", line 153, in startService
            mailLooper = self._mailingListFlushLooper.start(mailFlushInterval)
          File "/usr/share/caldavd/lib/python/twisted/internet/task.py", line 83, in start
            self()
          File "/usr/share/caldavd/lib/python/twisted/internet/task.py", line 114, in __call__
            d = defer.maybeDeferred(self.f, *self.a, **self.kw)
        --- <exception caught here> ---
          File "/usr/share/caldavd/lib/python/twisted/internet/defer.py", line 104, in maybeDeferred
            result = f(*args, **kw)
          File "/usr/share/wikid/lib/python/apple_utilities/MailUtilities.py", line 312, in flushMailingLists
            sharedMailingListManager().rebuildList()
          File "/usr/share/wikid/lib/python/apple_utilities/MailUtilities.py", line 247, in rebuildList
            self.updateListWithEntity(aGroup, rebuilding = True)
          File "/usr/share/wikid/lib/python/apple_utilities/MailUtilities.py", line 265, in updateListWithEntity
            users = groupExpander(entity.getAssociatedEntities())
          File "/usr/share/wikid/lib/python/apple_utilities/MailUtilities.py", line 604, in groupExpander
            return expandNames(shortNames)
          File "/usr/share/wikid/lib/python/apple_utilities/MailUtilities.py", line 602, in expandNames
            members.extend(expandNames([record.recordName() for record in aGroup.members()]))
        exceptions.ValueError: NSInvalidArgumentException - -[WPMultiValue lastObject]: unrecognized selector sent to instance 0x106f06630
    2011-05-26 14:15:56+0100 [-] in migration. repo version is: 23
    Any help would be appreciated.
    Mark

    I am having a similar issue as you marktech, with colaboration folder on a different drive.
    My temporary solution is to stop and start web services on the server, and the message goes away and users can log in.  Problem comes back on a server restart.
    Swamped here so have not been able to apply troubleshooting techniques.
    What I have checked is verifying permissions on collaboration folder.  Seems like I had to re-apply permissions after any significant update.
    My final resolution will be to migrate from the ssd hard drive (the extra speed is not any significant impact for us) to a 1TB hard drive and migrate data back over to a single drive in original directory locations.  appologies have not had ample time to research the issues....

Maybe you are looking for