Message Branching Incorrect payload

Hi
Im using message branching by passing the 2 different PO numbers to two different idocs
For this im using two mapping programs and obviously 2 interfacing mappings. Now when im running the scenario both the mappings are taking the first PO number only.. the second PO number is being discarded..
In the MM test tab both the mappings are successful with different PO number. But at runtime during message branching the second PO is being discarded.. I've checked "Maintain Order at runtime" in Interface determination too
But no use .. did i miss anythig
-keerthi

Wat I suggest is:-
Create two message type and inbound message interface.
In message mapping go to message tab - provide both the message type in target message.
Now go to Design tab and put the below logic at root node of both the mapping.
if PO value( take all PO value in one context) Equals constant value -> pass the output to If then function and map it to root node.
do the same for other message type.
And do the enhance configuration in Interface mapping.
chirag

Similar Messages

Incorrect payload in receiver adapter

Hi everybody!
We came across following situation.
We have a PI scenario IDOC->File. We have one ERP as a Sender and a couple of Receiver FTP systems. There are 3 inbound interfaces for each Receiver system with different message types and mappings for each type and Service interface accordingly. So we send one IDOC from ERP and get 3 different files on FTP with different content. Everything worked fine on Development server.
Then we moved the scenario to QA Server using CMS. And there we got issues with the scenario. We start getting 3 files on Receiver FTP with different names but same content inside. It seems like they are using same Service interface. But in SXI_MONITOR everything is fine on every step! Proper service interfaces are used, proper mapping is called, proper receiver is determined and communication channel is right too. And payloads after each step are correct! But in Communication channel monitoring in Runtime Workbench we see incorrect payloads for incorrect service interfaces. So the system behavior is very strange.
We tried to clear cache, restart PI, recreate Interface determination and Receiver agreement but nothing seems to help. We are still getting wrong payload in end file.
Did anybody experience similar issues? Or maybe any ideas on that point. Any thoughts are much appreciated.
Thanks in advance,
Andrew

Hi Andrew,
Here are my check list which might help to re think on the issue.
1. Have you even transported the configuration objects(i.e., Sender, receiver agreements..)?
If not, it is better to re configure the scenarios.
2. I think the problem might be at your communication channel, have a check at this.
3. Majorly i believe the problem might be at Receiver Determination and Interface Determination.You have to again go through this thoroughly
By giving my above thoughts i might not able to solve your problem, but i might help you to re-check these and find the solutions.
Hope this helped
Regards
Ramesh

What is payload, xi-soap message and xml payload....

can any 1 explains abt What is payload, xi-soap message and xml payload....

Hi Shiva,
see this abstract from messages file:
"The SOAP header of a message contains all the important information that the Integration Server requires to forward the message, while the payload contains the actual business data (such as <PurchaseOrder> in the example above). <b>You can also append an unlimited number of attachments to the message before it is sent. Attachments typically comprise non-XML data, for example, pictures, text documents, or binary data."</b>
Check this link for more info:
http://help.sap.com/saphelp_nw04/helpdata/en/b6/0b733cb7d61952e10000000a11405a/content.htm
Regards,
Subhasha

IDOC to File (BYpass)-- Error or Warning : " Message Branched. "

HI all,
Iam trying idoc to file scenario(bypass)
my idoc is triggered succesfully and it is reaching to the receiver system.
but the problem is in SXMB_MONI ,it is not showing my Receiver service details and showing with different symbol like " <b>>></b> " with message as " MESSAGE BRANCHED".
what might be the problem....???
Also Idoc reaching to the receiving system very lately.
Pls suggest me ASAP..
Thanks in Advance.
Regards,
Vijji

In the receiver determination, do you have multiple receivers, i.e , is the same idoc being sent to multiple receivers ?
If yes, then the message branch is used to split the source message so that it can be send to differetn targets. You will find multiple entires below the Slit Message Entry one for each receiver.
Regards
Bhavesh

DB_ACCESS_ERROR in the pipeline Message Branch

Hi, all.
In the IDoc -> XI -> File Scenario, sometimes(twice in this week) DB_ACCESS_ERROR occurs and the corresponding message shows System Error - Manual Restart Possible.
The error message in SXMB_MONI shows like the following and the trace shows similar error message.
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">DB_ACCESS_ERROR</SAP:Code>
<SAP:P1>SXMSQEUE_RCV</SAP:P1>
<SAP:P2>INSERT</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error accessing table SXMSQEUE_RCV method INSERT</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
When we rerun the message by using SXMB_MONI - Restart button, the message is executed without any problem. And our Database(SQL server) shows no error at all and XI system doesn't show any error.
Is there anyone who bumped into this trouble? Please give me some advice.
Best Regards.

This problem was solved by applying the following note.
Note 871891 - DB_ACCESS_ERROR
Best Regards.

Installed sync on Firefox 3.6.8. I receive error message: Server Incorrectly Configured. How to fix it?

I installed Sync on Windows XP Home Edition, Firefox 3.6.8, with Zone Alarm and AVG anti-virus. Sync is not updating, instead it produces error message: Server Incorrectly Configured and hangs up. How to fix it?

You might want to also post on this Google Group dedicated to Sync (formerly known as Weave), since it's such a new add-on.
http://groups.google.com/group/mozilla-labs-weave

TS3367 Why do i get an Error message of incorrect username or password at every try.

I upgraded to ios6 but face time and IM won't let me sign in. I can download sign in to iTunes but only these two refuse to accept my password. Error message of incorrect username or password at every try.
So the tech reset it, did some hard reset I think also checked the date n time setting and still nothing.

You should always indicate the line of code where the error occurs. Also, the value of the variables in that line, as that tells you what the problem is.
There are several places where you use '+' instead of '&' with mixed types which can cause this error.
However this line:
Dim orderid As Integer = (ds.Tables(0).Rows(0).Item(0)) + 1
is most likely the problem if you haven't checked first that there is a valid order ID returned from the query. If the table is empty then you should initialise the ID to an arbitrary value instead of trying to calculate it.

HT1695 What is an Exchange account? When I open the email app I get the message "Password Incorrect. Enter the password for the Exchange account "Exchange""

What is an Exchange account? When I open the email app I get the message "Password Incorrect. Enter the password for the Exchange account "Exchange""

An Exchange account is an e-mail account serviced my a Microsft Exchange server... Typically a corporate e-mail account. It used to be possible to configure a free gmail account as an Exchange account, but it is no longer possible to set one up that way.

HT1212 message "password incorrect enter voicemail password"

I keep getting the message "password incorrect enter voicemail password". I never set up a voicemail password and this message comes up every time I do anything on my phone. I need it to stop!

contact your carrier to reset your password for voice mail

Message "Customizing incorrectly maintained" in IW42

Hi All,
Our client system has been recently upgraded to ECC 6.0. And after that when i am executing transaction IW42, i am getting this message "Customizing incorrectly maintained". Though i am able to successfully complete and save the whole process but still this message is being displayed. I am not getting this kind of message in IW41 or IW44. I have checked configuration settings, but dint find anything missing. Has anyone encountered such type of message. Am i missing out on any configurations. Please help
Looking forward to your reply.
Regards,
Shobha

Hi
I saw your reply to shoba_pillai25.
Nice solution
what is the need of setting profile and maintaining tables in SM30?
What it will do exactly?
What are the other profiles to be maintained during configuration?
Regards,
Alagesan.M

Cannot access the iCloud mail for some reason I don´t know. Worked perfect until Nov 28th, but a message with "incorrect ID/password" popped up. Contacts and iCal is accessible. Have tried from iPad, Mac, iPhone and PC. Any recommendations?

Cannot access the iCloud mail for some reason I don´t know. Worked perfect until Nov 28th, but a message with "incorrect ID/password" popped up. Contacts and iCal is accessible. Have tried from iPad, Mac, iPhone and PC. Any recommendations?

Reset your password. Be sure your new one meets the requirements for length (8) and characters (at least one upper case and one number).

Ipad air email, unread message count incorrect

ipad air email, unread message count incorrect.
Exchange email account via activesync.
All messages are sync'd to the device.

Contact your exchange account administrator, they should be able to fix this for you.

Setting up mail get this message"password incorrect"

I am trying to set up my gmail account onto my ipad I followed the instructions per app start. Now I get thie same message password incorrect. I enter my passwrds and this message still shows up.

I've never seen this particular warning, but it's important to note that passwords for e-mail are always sent insecurely unless you are able to connect via SSL. You can set Mail to connect via SSL in the advanced account settings, assuming that your mail provider (AOL) allows such a thing, which some do not. Even if the password is sent encrypted, the rest of the e-mail is not, so you should never send any confidential information via e-mail, any more than you'd put it on a postcard.

After shutting down Firefox 3.68, an error message reading "Incorrect Function" pops up.

I upgraded to Firefox 3.68 about four days ago. After shutting down Firefox 3.68, an error message reading "Incorrect Function" pops up. I click "OK." Nothing seems to happen, either good or bad.
I installed Comodo Internet Security a few days before I upgraded to Firefox 3.68.
== This happened ==
Every time Firefox opened
== After I upgraded to Firefox 3.68.

I am the original poster. The problem seems to have nothing to do with my upgrade to Firefox 3.6.8 but with a configuration change I made to System Mechanic after I switched to Comodo Internet Security.

Unable to connect mac OSX 10.4.11 to wireless network (virgin media) even though iPad, iPhone and laptop ok. Get message 'password incorrect' even though it works with other devices. Keep getting message connect to BT unrestricted access.

Keep getting 'do I want to connect to BT unrestricted network' which I have never used before. I can get my ISP details input but get message 'incorrect password' even though it works with 3 other devices. My network provider, Virgin Media, sent an engineer but he couldn't solve the problem - said network was all ok so problem must be with my iMac (OSX 10.4.11). When I try to use internet I get BTWiFi is current wireless network - I've never used this! I've tried to change this and virgin media details are accepted, it's just the password stage that prevents me from connecting. I am not very knowledgeable with computers so I really need a step by step guide to solve this problem. PLEASE HELP!!!

Excuse me barging in on the thread, but I have a lot of experience with Telus, and roaming with my BlackBerry (currently a Z10). In short, you've been fed some outdated info by the Telus rep. Telus has become very Android-centric, and it seems like a good number of Telus CSR's are still reading from a Legacy BlackBerry trouble-shooting guide.
My Z10 is unlocked, and I periodically use an AT&T sim when traveling in the US. I have never had to change an email setting to get full email function -- including the SMTP settings. To put it simply, your device first connects to a network using credentials provided. At most hotels, for instance, your device will scan for and pick up a WiFi network. The hotel will tell you the WiFi network name and give you a password to use. You simply enter the password when prompted, then you may have to agree to certain conditions. That's it.
Your email settings are just that. Using whichever network to which you are connected, the user name and password give you access. The settings coincide with the email provider's server settings. These don't typically change with the location from which you are connecting.
I'd suggest you take a look at this very helpful email settings tool provided by BlackBerry, if you are having difficulty: http://helpblog.blackberry.com/2013/03/email-account-validation-tool/
It helps you determine the possible settings for connecting to your email provider. Different providers offer different connection options, sometimes more than one. Opinions vary, but my preference in descending order is: ActiveSync, IMAP, then POP if required. ActiveSync (aka EAS) and IMAP will offer 2-way sync.
Take a look at the tool and pop a message back here if you have any questions. Good luck. ~ecm

Message Branching Incorrect payload

Similar Messages

Maybe you are looking for