Message details not getting displayed in Message monitoring of RWB

Hi,
I am trying to see how many messages in Message Monitoring by selecting Integration Engine option, Message counts are getting displayed like how many has been processed successfully,processed with errors as well.
When I click on message count a pop up screen opens and gives me no messages are not available even for the same day messages.
Can any body give me an idea like where i can set any parameter to display in detail of messages in integration engine for one week back as well.
Thanks...

>When i click on count of messages which got processed with in one hour then it shows details of that messages, but when i select other messages which got processed on the same day but more than one hour then its not displaying any details of the messages.
I guess in this case your retention period is set to zero in SXMB_ADM. And this is the reason you cannot see the message even if they are an hour old.
>Is there any where where we can set parameters or any oss note to be implemented in order to see details of any messages with in a week or 10 days.
In XI run tcode SXMB_ADM and then follow "Integration Engine Configuration ---> Specific Configuration". Now check the Archive & Deletion Current & Default Values and set the Retention period as per you need.
For more information see page 11 of this document.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50?quicklink=index&overridelayout=true

Similar Messages

Support messages not getting displayed in Messages Tab - Solar01/02

Hi,
I am having an issue in displaying the support messages under the message tab of Solar01 and Solar02. If I try to create a new message, the notification pops up and also gets saved. But the message does not get displayed under the tab.
I can find that the message is properly created through transaction monitor.Even if I try to manually assign the support message number in Messages tab it gives an error saying the number does not exist.We are using SOLMAN 4.0 SP 11.
Please help. Points will be awarded for useful answers.
Regards,
J.Prabananth

Dear Prabanath,
       I am not too sure you will be able to assign numbers to support messages. Run the report CRM_DNO_MONITOR and get the full number from the report and insert the ticket number in issue messages tab and click on save and go back one screen, it will ask you if you want to save, select yes.
   That worked for me. Recently I have strugged to resolve this. We are on Solman 4.0 SP12. Check if you have all necessary permissions for you and do you have any thing in sm21 or st22 by any chance if the issue is related to support pack ?
     Let me know if there are any issues. I might be able to help you.
N

Message is not getting displayed.

Hi all,
I have a form with KEY_COMMIT Trigger with the code below:
DECLARE
cls_date DATE;
Duration NUMBER;
int_rate NUMBER(3,2);
PA_AMT    NUMBER(10,2);
TRMS      NUMBER;
I_RATE    NUMBER(4,2);
pl_id ParamList;
usernm VARCHAR2(20);
OLD_FDR_NO NUMBER;
BEGIN
PA_AMT:=:KEC_FDACCT_MSTR.AMOUNT;
TRMS:=SUBSTR(:GROUP_TYPE,1,2);
commit_form;
SELECT INT_RATE INTO I_RATE FROM FDSLAB_MASTR WHERE GROUP_TYPE=:GROUP_TYPE AND FDSLAB_NO=:KEC_FDACCT_MSTR.ACCT_TYPE;
DUARATION_DTL(PA_AMT,TRMS,I_RATE);
message('3- I want this message to be displayed.This is not getting displayed');
message(' ');
SELECT sap_code INTO :KEC_FDACCT_MSTR.sap_code FROM FDSLAB_MASTR WHERE GROUP_TYPE=:GROUP_TYPE AND FDSLAB_NO=:KEC_FDACCT_MSTR.ACCT_TYPE;
commit_form;
END;
In the above code, you can find DUARATION_DTL(PA_AMT,TRMS,I_RATE);
DUARATION_DTL is a Procedure which is coded in the Program Unit with the below code.
PROCEDURE DUARATION_DTL(PAMT NUMBER,QTR NUMBER,RATE NUMBER) IS
.........SOME variables declared..........
BEGIN
SOME IF ELSE statements
SOME INSERT statements
SOME UPDATE statements
COMMIT;
message('FDR No Saved Successfuly'||:KEC_FDACCT_MSTR.ACCT_FD_NO);
message('');
END;
When I run the form, Message('3') that is the message marked is not getting displayed.
Only the message in procedure DUARATION_DTL that is in green is getting displayed.
Can you let me know why?
Is there anything i should do to display this message,
Or is it because its buggy??
Help me please.
Thank You.
Oracle Forms 6i.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production

Hi AW, I actually don't want to display that message.
I want to know why is that message not getting displayed??
Is that because of the following Triggers??
Trigger:ON_MESSAGE:
if MESSAGE_CODE = 40400 then
message('FDR information saved successfully.');
message('');
else
message(MESSAGE_TEXT);
end if;
Trigger:ON_ERROR:
if ERROR_CODE = 40202 then
message('This field cannot be blank');
message(' ');
RAISE form_trigger_failure;
elsif ERROR_CODE = 41800 then
message('List of values is not available for this field.');
message(' ');
RAISE form_trigger_failure;
elsif ERROR_CODE = 40401 then
null;
else
message(ERROR_TEXT);
message(' ');
RAISE form_trigger_failure;
end if;
These above mentioned triggers are present in the form.
Is it because of these triggers , that the message is not getting displayed??
If yes, can you tell me why?

Dynamic mandatory field error message is not getting displayed in webui

Hi,
In Appointment if the importance is HIGH i made Location as mandatory.For this i enhanced BT126H_APPT/ApptDetails. In the get_p_location() method of BTACTIVITYYH i have written the code.
Now the problem is Error message for this dynamic mandatory field is not getting displayed in webui.
I debugged in DO_FINISH_INPUT error message is getting generated but it is not getting displayed in ui.
Can anybody tell where the problem is?
Thanks,
Hari.

Hi Hari,
Really sorry do not know how to convert this nug file to text
How ever quick solution for your problem would be just keep your validation in 'DO_VALIDATE_INPUT' method of the view controller.
Means even if the User clicks on SAVE , Since it fails here , it would not allow you to go further.
Thanks,
Rajesh P

Custom message is not getting displayed after raising do_not_save

Hi all,
In Order_save BADI, based some conditions, we were throwing custom messages.
FYI., code used,
CV_OWN_MESSAGE = 'X'.
MESSAGE 'xxxxxxxxxxxxxx' TYPE 'W' Raising do_not_save.
After Solman upgrade from 7.0 to 7.1, system is not displaying custom message and
system throwing message like "The document could not be saved" only after execution of above message statement.
How can I overwrite this system message.
Any help would be highly appreciated.
-Mahi

Hi,
Please check the below notes
1922870 - Raising DO_NOT_SAVE event from ORDER_SAVE BADI cause dump
1650635 - Work Center: problems when using BAdI ORDER_SAVE
Rg,
Karthik

Xpath field details not getting displayed

Hi all,
I am working on a idoc to file scenario, where I want to refer the receiver to be determined based upon certain condition or values that get populated for a particular field (using receiver determination). But the problem is that when I click on the condition tab on receiver determination I get a warning "Problem loading schema description"
with message as
"Message interface does not exist in any software components installed on this business system"
But since it is an Idoc at the source we dont have any msg interfaces, further if i neglect this warning message and go further, I am not getting the fields or details of the Idoc structure getting displayed in the xpath.
But the same when I use for a file scenario(file as sender) I get the details of the context object if any.. Let me know how to resolve this..
Thanks in advance
Regards,
Nithiyanandam

Hi,
Yes you coudl add the missing Software component as per below steps
Even if you open Business system in Integration Directory, at last tab "Other Attributes" --> you will find the list of software components.
Press the tab Third Party service to verify the list against SLD.
If its not avaialbel in SLD
1. Goto System Landscape Directory
2. select Business Landscape and slect the apporpriate Business system and open it. (Click the name of BS)
3. There you will get the list of Software components added in it.
4. Verify the technical system name.
5. Also verify if same technical system name is used after importing the software component in Integration Repository (IR).
Goto IR -- > Explore the SCV -->Double click on name of software component version -->Check Interface Import as Import of RFC and have the same details in Connection data as per technical system
If everything is setup just refresh the SLD_CACH and import the scenario once again in Integration Directoy and process it.
You will see the IDOC in Business system.
Thanks
Swarup
Edited by: Swarup Sawant on Feb 4, 2008 8:00 AM

There are no items to display!(message) - page not getting displayed...

hi all,
        i have the leave request approval page linked to the workset and role Manager sel-service. im getting the preview of the page in the portal content administration. But when i login as MSS user, the role and workset are being displayed but the page is not being shown,im getting the following
"Critical error message" :
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: The running application consciously caused an abort with short dump., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
     at com.sap.xss.hr.lea.form.FcForm.getCustomizing(FcForm.java:1019)
     at com.sap.xss.hr.lea.form.FcForm.onInit(FcForm.java:417)
     at com.sap.xss.hr.lea.form.wdp.InternalFcForm.onInit(InternalFcForm.java:2053)
     at com.sap.xss.hr.lea.form.FcFormInterface.onInit(FcFormInterface.java:184)
     at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface.onInit(InternalFcFormInterface.java:1911)
     at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface$External.onInit(InternalFcFormInterface.java:2007)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:921)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:890)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1083)
     at com.sap.xss.hr.lea.worklist.VcWorkList.onInit(VcWorkList.java:267)
     at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkList.onInit(InternalVcWorkList.java:363)
     at com.sap.xss.hr.lea.worklist.VcWorkListInterface.onInit(VcWorkListInterface.java:164)
     at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkListInterface.onInit(InternalVcWorkListInterface.java:144)
     at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkListInterface$External.onInit(InternalVcWorkListInterface.java:220)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1288)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:355)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:548)
     at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:192)
     at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:754)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:289)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: The running application consciously caused an abort with short dump., error key: RFC_ERROR_SYSTEM_FAILURE
     at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
     at com.sap.xss.hr.lea.model.LeaveRequestAdaptiveModel.pt_Arq_Customizing_Get(LeaveRequestAdaptiveModel.java:392)
     at com.sap.xss.hr.lea.model.Pt_Arq_Customizing_Get_Input.doExecute(Pt_Arq_Customizing_Get_Input.java:137)
     at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
     ... 66 more
Please help me resolve this...
thanks,
nandan

if you leave configuration is done .
there will be some There was an incorrect data in your system . to do this please follow following process.
delete this request using
PTARQ> Delete documents (RPTARQDBDEl)
Please read the report documentation before
deleting the request but it should be safe as it is
a development system.
Please delete this with the above information or delete all
the records for the approver .
after there will be some incorrect workitem in appover inbox.
you need to clear that also by Tcode - SWWL.
Regards,
Vivek Jadhav

Error message is not getting displayed in customized subscreen

Hi Experts,
I have created customized sub screen for transaction BP. There are two fields namely CPS applicable and PPS applicable.
I am validating both fields against value if user enters same value as Y and Y . Then Error message should display
saying that 'It should not be same and please change the entry'. Its working fine when press enter on the sub screen.
But its not working where if users try to save the entries without entering enter button.
Please help me anyone regarding this issue.
Thanks
Ramesh Manoharan

Hi ,
you can do validations at Save Using BADI or Events ( please ref DEZ_'s Posting), in my case im using BADI to do validation , reason is...user was able to save witout going to the custom tab , thats y im using BADI and Screen(Custom) Validations.
regards
Prabhu

Data not getting displayed in SNI monitor Web-UI screen

Dear all,
We are running the program ROEMPROACT2 in ECC to transfer planned independent requriement entered in MD61, the message ProductActivityNotification_In is successful in ECC and SNC.
SLG1 shows warning message "Item 1: ShipFromLocation and VendorParty are both not specified" but we not able to see the planned demand in SNI Details - Product view.
Request please let us know if we have missed out on any config.
thanks,
mahesh.

Hi Mahesh,
currently i am facing the same issue as mentioned by you above. will you please let me know how it got resolved?
Thanks ain advance.
Regards,
aruna

Problem in BADI, error message not getting displayed

Hello Experts,
I am facing a strange problem in BADI.
The requirement is that the user should not be allowed to change the plant field
on the screen of standard MM transctions for PO/PR amendment.
I have written the code in separate BADIs for PO and PR.
I am displaying an error message if the user tries to change the field.
For PO, it is working fine.But for PR, the same code is not working.
The control is going over to the BADI for PR and rest of the code is working fine.
But the error message is not getting displayed for PR amendment.
Can anybody please suggest the possible cause of problem and some solution to it.
Thanks in advance.

Hi
See the sample BADI code for PR which raises an exceptions and do accordingly
BAdI Name: ZPUR_RFQ (Implementation name) Purchase Requisitions
Definition Name: ME_REQ_POSTED
Interface Name : IF_EX_ME_REQ_POSTED
Implementing Class: ZCL_IM_PUR_REQ
Method :            POSTED
METHOD if_ex_me_req_posted~posted .
DATA : v_mtart TYPE mtart.
DATA l_s_eban TYPE ueban.
LOOP AT im_eban INTO l_s_eban.
    IF l_s_eban-estkz NE 'B'.
      CLEAR v_mtart.
      SELECT SINGLE mtart INTO v_mtart FROM mara WHERE matnr = l_s_eban-matnr.
      IF v_mtart EQ 'ZERS' OR v_mtart EQ 'FHMI' OR v_mtart EQ 'UNBW'.
        MESSAGE e000(zm_msg) WITH 'You are not allowed' 'to create PR for stock items'.
      ENDIF.
    ENDIF.
    IF l_s_eban-knttp NE 'F' OR l_s_eban-pstyp NE '9'.
      IF l_s_eban-knttp NE 'A'.
        IF ( l_s_eban-pstyp NE '9' AND l_s_eban-pstyp NE 'D' )
           AND l_s_eban-matnr EQ space.
          MESSAGE e000(zm_msg) WITH 'You cannot create'
            'a PR without material number'.
        ENDIF.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDMETHOD.
<b>Reward points for useful Answers</b>
Regards
Anji

Message not getting displayed in BTE 1030

I am displaying a message in functional module implemented for BTE 1030.
The message is not getting diplayed. I have changed the message tyto 'S, I. W, E but still it does not display. The sy-subrc is 0 after passing the messga statement.
(The functional module is called normally and not in background)

Just check your settings in transaction FIBF, and make sure you have choose the right Process Modules(Ususally we choose "of an SAP Application"), and if you have set some other limitation on Country ISO code or Application Indicator, pls make sure all of them have been satisfied.

I am using Windows XP. I have loaded Firefox, but it will not launch. I had success loading and launching on my other computer that is running Vista. I need help please? I do not get an error message.

I am running windows XP and have successefully loaded Forefox. My Firefox will not launch and I do not get an error message. When I click on the firefox icon I see an hourglass for two to three seconds and it still does not launch. Please help!
== Each time I try to launch Firefox. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Do you have NoScript or Flashblock or some similar Extension installed? If so, are you allowing the site, at least on a temporary basis, access by such an Extension?
Your Shockwave for Director is out of date. You can check here: http://www.mozilla.com/en-US/plugincheck/
To update it, use the link on the page below under "Installing Shockwave", download and save to your hard drive, close Firefox, click the file you downloaded, after the install, open Firefox and check on the above link again.
https://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox

I get a message the message " Can not get mail. Not connected to server" Yet I am connected with Wi-fi and can access all other websites. Can you advise? My iPad is only a month old!

Has any one experienced not being able to send mail and only receiving some? I get the message " can not get mail. No connection to the server! " Yet I get some mail but can not send out any. My iPad is only 1 month old! It worked perfectly for about 10 days.
Thx
Agnes

Hey agnesfromcopenhagen k,
Thanks for the question. I understand you are experiencing issues with Mail on your iPad. The following resource provides some troubleshooting steps. What kind of account are you using? Some internet providers require that you be connected to your home Wi-Fi (or for work accounts, inside your corporate Wi-Fi/firewall). Also, some email accounts require two-step authentication. For more information, see this resource:
iOS: Troubleshooting Mail
http://support.apple.com/kb/TS3899
Thanks,
Matt M.

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

Back up all data. Rebuild the mailbox.

I can't unlock the screen to access my macbook pro. When I enter the password it just jiggles. I'm not getting an error message, so I'm pretty certain that the password is correct. Any suggestions?

I can't unlock the screen to access my macbook pro. When I enter the password it just jiggles. I'm not getting an error message, so I'm pretty certain that the password is correct. Any suggestions?

I already checked that one.
I'm baffled, especially since it will usually give you the Invalid user name or password entered message. I'm not getting that. Instead the password field just jiggles back and forth. Very odd.

Message details not getting displayed in Message monitoring of RWB

Similar Messages

Maybe you are looking for