Message mapping changes

Hi All.
I created a message mapping from a custom message type towards MATMAS_BAPI01.
I disabled the EDI_DC40 field and in the idoc communication channel I disabled "Apply control record values from payload".
When I check the final idoc message created, I noticed that some EDI_DC40 parameters were wrong.
<SAP:TABNAM>EDI_DC40</SAP:TABNAM>
<SAP:MANDT>200</SAP:MANDT>
<SAP:DOCREL>640</SAP:DOCREL>
<SAP:DOCNUM>0000000000037246</SAP:DOCNUM>
<SAP:DIRECT>2</SAP:DIRECT>
<SAP:IDOCTYP>MATMAS_BAPI01</SAP:IDOCTYP>
<SAP:CIMTYP />
<SAP:MESTYP>MATMAS_BAPI</SAP:MESTYP>
<SAP:MESCOD />
<SAP:MESFCT />
<SAP:SNDPOR>SAPCX1</SAP:SNDPOR>
<SAP:SNDPRN>host01</SAP:SNDPRN>
<SAP:SNDPRT>LS</SAP:SNDPRT>
<SAP:SNDPFC />
<SAP:RCVPOR>CFDCLNT200</SAP:RCVPOR>
<SAP:RCVPRN>CFDCLNT200</SAP:RCVPRN>
<SAP:RCVPRT>LS</SAP:RCVPRT>
<SAP:RCVPFC />
<SAP:TEST />
<SAP:SERIAL />
<SAP:EXPRSS />
<SAP:STD />
<SAP:STDVRS />
<SAP:STATUS>03</SAP:STATUS>
<SAP:OUTMOD />
<SAP:SNDSAD />
<SAP:SNDLAD />
<SAP:RCVSAD />
<SAP:RCVLAD />
<SAP:STDMES />
<SAP:REFINT />
<SAP:REFGRP />
<SAP:REFMES />
<SAP:CREDAT>2005-09-12</SAP:CREDAT>
<SAP:CRETIM>23:21:31</SAP:CRETIM>
<SAP:ARCKEY>2FE85D8023D311DA9BDB000D56B9D8A6</SAP:ARCKEY> </SAP:IDocOutbound>
In concrete
<SAP:SNDPRN>host01</SAP:SNDPRN> had to be changed into <SAP:SNDPRN>hostXX</SAP:SNDPRN>. I thought the value host01 came from the sld (logical system name of the technical system attached to the business system), so I changed that towards hostXX.
<SAP:RCVPOR>CFDCLNT200</SAP:RCVPOR> had to be changed into <SAP:RCVPOR>SAPCDD</SAP:RCVPOR>. I thought this value came from the rfc destination in the xi sytem, so I created a new one called SAPCDD and configured it into the idoc adapter.
However, this change in the sld/XI system did not affect the generated idoc (no, I did not forget to activate ).
I decided to do some more drastic changes:
- enable EDI_DC40 field in the message mapping
- enable "Apply control record values from payload" in the idoc communication channel
I now hardcode the wanted values.
After activating the changes, still the same idoc is send towards the R/3 system.
Can anyone tell me what I am doing wrong.
Is it a caching problem or am I doing something wrong.
Kind regards

hi Geert,
take a look at my weblog:
/people/michal.krawczyk2/blog/2005/09/01/xi-idoc-adapter--edidc40--demystified
it may answer some of your questions:)
Regards,
michal

Similar Messages

Dynamically change Receiver Business system in message mapping

Dear all,
I would like to change the receiver business system in the message mapping that is used in the interface determination. I do understand there is an enhanced receiver determination where I can use a mapping but that is not what I am looking for.
I think this should be possible if we can change the appropriate value in the SOAP(message) header.
Possible candidates I can think of by looking at the SOAP header in SXMB_MONI are
1. SOAP:Header- SAP:Main- SAP:Receiver- SAP:Service
2. SOAP:Header- SAP:OutboundBinding - SAP:OutboundBindingEntry - SAP:ToServiceName
Q1. Which one of the above is relevant while identifying the receiver agreement ?
Q2. What is the best way to access them from the mapping(preferably from a UDF) ?
Thanks in advance.
Cheers
danus
PS: I have tried to set "http://sap.com/xi/XI/System","ReceiverService" in Dynamic config & ReceiverService, BusinessSystemReceiver and ReceiverSystem in the Containers Transformation Parameters, but didn't get the expected result.

Chidambaram,
You use an enhanced receiver determination to have a mapping program determine the receivers of the message dynamically at runtime. Instead of creating the receivers in the receiver determination manually, you assign a mapping to the receiver determination and this returns a list of receivers at runtime.
A typical usage case is if you do not yet know the names of the receivers at configuration time. In this case, you can define a mapping program, for example, which reads a list of receivers from a table or from the payload of the message at runtime.
Go through the following link:
[Receiver Determination enhancement|http://www.****************/Tutorials/XI/RecvDetermination/Enhancement.htm]
Hope your problem gets resolved.
Regards,
Kiran Bobbala
Edited by: kiran Bobbala on May 7, 2008 5:47 PM

Changing datatype, afterwards Message-Mapping cannot produce target element

Hi,
we use PI/700.
I changed a working system by changing a datatype of an existing message (adding a new element). My interface mapping contains two mappings: an XSL-Mapping and afterwards a Message-Mapping.
My interface mapping looks like this:
Message-Type A ->
XSL-Mapping ->
Message-Type B ->
Message-Mapping ->
Message-Type B
When I test each mapping alone everything works fine (with the new element I added).
But if I test my interface mapping in IBD with both mappings together, I'll get an error:
"Cannot produce target element /MT_EDM_OUTBOUND_LASTGANG_TO_SAP/LASTGANG/MASSEINHEIT. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd".
Is it possible that XI has problems in refreshing the XSDs?
I tried this:
(1) I changed my Message-Mapping and now all elements are mapped 1:1 -> no success!
(2) Later I changed my Message-Mapping and build in "exists" with "if" to check whether the element "MASSEINHEIT" is generated by the XSL-Mapping -> It doesn't exists (??? - WHY? - when I test it, everything works fine)
(2) Afterwards I changed my interface mapping and take only the XSL-Mapping (without the following Message-Mapping) -> the element "MASSEINHEIT" exists now!
I'm totally confused!
Any ideas?
Regards
Wolfgang Hummel

Hi,
If you have made structural changes to the data type..such as number of fields have decreased/increased..or some new fld altogether, then you have to activate the datatype..goto message mapping and then re-do the mapping...but if you have made "typo" changes like names have been changed, etc..then i think it should be alrite..i have sometimes made changes to my datatype, but after activating it, i had to redo the mapping..that was it!...the rest would fall into place:) No changes had to be made in the interface mapping..
Regards,
Sushumna

[RFC to File]Problem about Changing file name in message mapping.

Hi,
my problem:
    Type:RFC to File
    I change the file name in message mapping.
when I call the RFC to send the data twice at the same time, both of the output file names are changed while I only want to change the second output file name.
    thanks
Sam

In my MM, the input values to these variables (var1, var2 and var3) are (<ZZCOMBI>array,G499999,END_FIFC0029) ,
var1 is an array of input <ZZCOMBI> item list;
var2 is get from a property file by call another UDF;
var3 is constant value.
the test input data :
I send the data for the first time:
- <rfc:Z_IFCFR821_ZIFCTT82100010 xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <T_ZIFCTS82100010>
- <item>
<ZZCOMBI>G000002G000002</ZZCOMBI>
<ZZKYKBN>*</ZZKYKBN>
<ENAME_VE />
<ENAME_Z5 />
</item>
</T_ZIFCTS82100010>
</rfc:Z_IFCFR821_ZIFCTT82100010>
so the input values to these variables (var1, var2 and var3) are (G000002G000002,G499999,END_FIFC0029)
the output file name(File1) :END_FIFC002920090413-171534-053.dat
output record: G000002G000002
because the data what I send is the last record, the system send the dummy data for the second time by program.
- <rfc:Z_IFCFR821_ZIFCTT82100010 xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
- <T_ZIFCTS82100010>
- <item>
<ZZCOMBI>G499999</ZZCOMBI>
<ZZKYKBN />
<ENAME_VE />
<ENAME_Z5 />
</item>
</T_ZIFCTS82100010>
</rfc:Z_IFCFR821_ZIFCTT82100010>
so the input values to these variables (var1, var2 and var3) are (G499999,G499999,END_FIFC0029)
the output file name(File2) :END_FIFC002920090413-171533-928.dat
output record: G499999
I find that File2(20090413-171533-928) was ouput before File1(20090413-171534-053 ) from the time stamp.
I am not sure about that "XI will create a message ID for each message and the messages are independent." as you mentioned above.
Best regards
Sam
Edited by: YONGHE ZHOU on Apr 15, 2009 3:59 AM

No effect after changing the message mapping

Hi everybody,
i'm using PI 7.1. After changing the attributes in my message mapping i can no see any effect in my result.
Should it be a cache problem? Where can i delete the caches?
regards,
Sid

Hi,
I guess there can be two things.
before going to the tcode sxi_cache...
Please go to the IR, Click Environment, Cache Notification and then select author as your id.
Now see if any are in red status. if so click on the change and click Repeat Cache Notification.
Now press refresh.
I guess this will resolve your problem

Changes done in message mapping is not reflecting in output

Hi all,
i have created one scenario XML to XML and i before i had done 1 to 1 mapping, i got the output also.
but when i changed few calculation in the message mapping
there is one node "name" and "Description" in source and target in both places.
i am having name in SOURCE XML as "something" but i want to change this name to "Xsomething" and in description i have something in source but i want to pass constant value "ZSUBHODIP".i did mapping in message mapping, and when i did the testing in message mapping then in target in message mapping
i got "XCOPC_C03" and "ZSUBHODIP" but when it takes the XML file which is in my system then in output XML name value "XCOPC_C03" and description "ZSUBHODIP" is not coming.
i activated it too.
even i tried with the same FILE to FILE scenario also but in this scenario also problem is same like one one mapping only then when i changed it in message mapping then previous output is coming.
is there server problem, if yes then how to fix it??
please tell me what to do
thanks

Hi,
can you test it like this:
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
Regards,
Michal Krawczyk

Change Queue name in Message mapping

Hi
We want to change the queue name dynamically in the message mapping.
We refered the post
Re: EOIO queue name change
http://help.sap.com/saphelp_nw04/helpdata/en/6e/ff0bf75772457b863ef5d99bc92404/frameset.htm
But as said in it, we are not able to access the parameter QUEUE_ID or QUALITY_OF_SERVICE.
Other than these two parameters, we can access all parameters.
Below is the code to access one of them.
while compiling, the message mapping gives error as below.
cannot find symbol
symbol : variable QUEUE_ID
Any pointers.
///// CODE
MappingTrace trace;
String constant;
java.util.Map map;
trace = container.getTrace();
// get constant map
map = container.getTransformationParameters();
constant = (String) map.get(
StreamTransformationConstants.QUEUE_ID);
trace.addInfo("QUEUE ID:" + constant);
return constant;
Regards
Anandan

Hi Anandan,
As given in help you can only get queue Id if you have Quality of service as ExactlyOnceInOrder. So make sure you have selected that option.
http://help.sap.com/saphelp_nw04/helpdata/en/6e/ff0bf75772457b863ef5d99bc92404/content.htm
Regards,
---Satish

Message Mapping - Initialize counter every context change

Hi all,
is there any way to develop a counter customer function in a graphical message mapping so every context change of a field the counter initializes?
Imagine i have the following structure:
1 DATA
1.1 DETAIL
1.2 DETAIL
2 DATA
2.1 DETAIL
2.2 DETAIL
and i wanna count DETAIL fields but initialize the counter every DATA field. Is there any way to do it?
Thanks a lot.

Hi,
If your Source structure is
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_DATA xmlns:ns0="http://yash.com.YH1309">
   <DATA>
      <DETAIL/>
      <DETAIL/>
   </DATA>
   <DATA>
      <DETAIL/>
      <DETAIL/>
      <DETAIL/>
   </DATA>
</ns0:MT_DATA>
and You want the Target as
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_DATA xmlns:ns0="http://yash.com.YH1309">
   <DATA>
      <DETAIL>COUNTER=1</DETAIL>
      <DETAIL>COUNTER=2</DETAIL>
   </DATA>
   <DATA>
      <DETAIL>COUNTER=1</DETAIL>
      <DETAIL>COUNTER=2</DETAIL>
      <DETAIL>COUNTER=3</DETAIL>
   </DATA>
</ns0:MT_DATA>
Create the below UDF with one argument (DETAIL) and select Execution type all values of a Context
for (int i =1;i<=DETAIL.length;i++)
result.addValue("COUNTER=" + i);
but if you want Your Target as
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_DATA xmlns:ns0="http://yash.com.YH1309">
   <DATA>
      <DETAIL>1</DETAIL>
      <DETAIL>2</DETAIL>
   </DATA>
   <DATA>
      <DETAIL>1</DETAIL>
      <DETAIL>2</DETAIL>
      <DETAIL>3</DETAIL>
   </DATA>
</ns0:MT_DATA>
So please Follow abhishek salvi's reply

Change message mapping

Dear experts,
As i am very to XI,to some this question might seem a little absurd.
But it is alway better to work safely so i am asking.
I am asked to change Fix Values in one of message mapping.At the same time i am asked to insert a new value also.
I did so in fix values list matching key to a value.Then i used MessageMapping ->Save.Change become persistent showing
a pencil icon on that message mapping.
I did this activity in DEV.Is this right way or i still further need to activate this mapping or any other step.I just want to confirm
whether the required change is done ?

Hi Sharma,
1. Once you have done the changes then you have to activate that object.
2. Once the object is activated then we have to send that object to the PIQ (Quality) as well as PIP (Production) systems.
3. Update the technical spec (documentation) accordingly.
Regards
Ramesh

Change Message Mapping / Cannot change / Pen not active?!

Hi there,
i have a Problem. I have to change a Message Mapping.
SAP sended me a Note with a Word Doc where is described what i have to change..
But in the Integration Builder Design i cannot change a mapping.. cause the PEN in the Menu is greyed out...?!
Please help
Regards
Bjoern

Thanks
that was it

Help with Message Mapping - Context Change

I need help with the following message mapping. I am filtering by EMP_STAT in the Message Mapping. I have this working for the ROW structures, but I can get the HEADER/REC_COUNT field to calculate. I can do just a record count of ROW and get it to work, but I can't get it to work with the filter EMP_STAT = 'REG' added. I get a context error. Could someone send me the mapping code.
Sender XML----
<RECORD>
<ROW>
<EMPLOYEE>111</EMPLOYEE>
<EMP_STAT>REG</EMP_STAT>
</ROW>
<ROW>
<EMPLOYEE>222</EMPLOYEE>
<EMP_STAT>PT</EMP_STAT>
</ROW>
<ROW>
<EMPLOYEE>333</EMPLOYEE>
<EMP_STAT>REG</EMP_STAT>
</ROW>
</RECORD>
Receiver XML----
<RECORD>
<HEADER>
<REC_COUNT>2</REC_COUNT>
</HEADER>
<ROW>
<EMPLOYEE>111</EMPLOYEE>
<EMP_STAT>REG</EMP_STAT>
</ROW>
<ROW>
<EMPLOYEE>333</EMPLOYEE>
<EMP_STAT>REG</EMP_STAT>
</ROW>
</RECORD>

Hello,
You can use this mapping
For REC_COUNT:
EMP_STAT -> equalsS: constant:REG -> ifWithoutElse -> removeContext -> count -> REC_COUNT
                                 EMPLOYEE -> /
For ROW:
EMP_STAT -> equalsS: constant:REG -> ifWithoutElse -> removeContext -> ROW
                                 EMPLOYEE -> /
For EMPLOYEE:
EMP_STAT -> equalsS: constant:REG -> ifWithoutElse -> removeContext -> SplitByValue -> EMPLOYEE
                                 EMPLOYEE -> /
For EMP_STAT:
Constant: REG -> EMP_STAT
Hope this helps,
Mark

Error while activating any message mapping in IR: very strange

hi forum i m getting an error in IR while activating any messageMapping.
the error is too long to be posted....i m posting a few lines of that:
     Internal error while checking object Message Mapping MM_sdptestFileToFile | http://sdzpoc.com.test/sdptest (ZPOC_TEST, 1.0 of zpoctest); see details (CHECK_EXCEPTION)
     Internal error while checking object Message Mapping MM_sdptestFileToFile | http://sdzpoc.com.test/sdptest (ZPOC_TEST, 1.0 of zpoctest); see details (CHECK_EXCEPTION)
     /usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapdddd0cb0100311dca6090012799eddc6/source/com/sap/xi/tf/_MM_sdptestFileToFile_.java (No such file or directory (errno:2))
     /usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapdddd0cb0100311dca6090012799eddc6/source/com/sap/xi/tf/_MM_sdptestFileToFile_.java (No such file or directory (errno:2))

Sudeep,
Let we try this way. I'm sure you might have some existing mapping objects in IR.
Try to change that object(Description give some name) and activate again the object.
Reply your results whether you are getting the same error.
One sec before changing the object just test the mapping and change the object.
Best regards,
raj.

Message Mapping error in UDF

I am receiving errors when trying to activate my MM. I believe the issues are in one of two UDF's. These UDF's do work in another MM without error. Below are the error's and UDF's.
ERRORS:
Activation of the change list canceled Check result for Message Mapping MM_WPDBBY_WPDBBY01_TO_POS_WAWAFILE | http://wawa.com/xi/erp/pos: Starting compilation Source code has syntax error: /usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map5420e070cabe11dcab4b00306ef38da9/source/com/sap/xi/tf/_MM_WPDBBY_WPDBBY01_TO_POS_WAWAFILE_.java:3291: cannot resolve symbol symbol : variable container location: class com.sap.xi.tf._MM_WPDBBY_WPDBBY01_TO_POS_WAWAFILE_ map = container.getTransformationParameters(); ^ /usr/sap/XID/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map5420e070cabe11dcab4b00306ef38da9/source/com/sap/xi/tf/_MM_WPDBBY_WPDBBY01_TO_POS_WAWAFILE_.java:3293: cannot return a value from method whose result type is void return constant; ^ 2 errors
UDF's:
public String getSender(Container container){
String constant;
java.util.Map map;
// get constant map
map = container.getTransformationParameters();
constant = (String) map.get (StreamTransformationConstants.SENDER_SERVICE);
return constant;
IMPORTS: com.sap.xi.mapping.parse.dom.;javax.xml.parsers.;java.io.;com.sap.aii.mapping.lookup.;org.w3c.dom.*;
public String getSeqNum(String fileType,String objNum,String Sender,Container container){
String request = "<ns0:ZRFC_NUMBER_GET_NEXT xmlns:ns0=\"urn:sap-com:document:sap:rfc:functions\"><NR_RANGE_NR>" + fileType + "</NR_RANGE_NR><OBJECT>" + objNum + "</OBJECT><QUANTITY/></ns0:ZRFC_NUMBER_GET_NEXT>";
InputStream isRequest = new ByteArrayInputStream(request.getBytes());
SystemAccessor accessor = null;
String num = null;
try{
     // 1. Determine a channel.
     Channel channel = LookupService.getChannel(Sender, "R_RFC_ERP");
     // 2. Get a system accessor for the channel.
     accessor = LookupService.getSystemAccessor(channel);
     // 3. Create a payload according to the data type which the adapter expects.
     //    Use service.getBinaryPayload() for binary payload,
     //    and service.getTextPayload() for text payloads.
     Payload payload = LookupService.getXmlPayload(isRequest);
     // 4. Execute lookup.
     Payload response = accessor.call(payload);
     //Parse response
     DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
     DocumentBuilder builder = factory.newDocumentBuilder();
     InputStream resStream = response.getContent();
     Document doc = builder.parse(resStream);
     Element sequence = doc.getDocumentElement();
     NodeList number = sequence.getElementsByTagName("NUMBER");
     //Extract Number
     num = DOMUtil.getSimpleElementText((Element) number.item(0));
} catch (Exception e) {
     return e.getMessage();
} finally {
     try {
          if (accessor != null) accessor.close();
     } catch (Exception e) {
          return e.getMessage();
GlobalContainer gc = container.getGlobalContainer();
gc.setParameter("Num", num);
return num;
Any help is appreciated.
Regards,
Darrell

Fauver,
Just to narrow down the problem first remove the first udf and only use the 2nd user defined function. Also in the 2nd udf you have to change this line:
try{
// 1. Determine a channel.
Channel channel = LookupService.getChannel(Sender, "R_RFC_ERP");
In the above line instead of Sender you use the business service or business system where R_RFC_ERP RFC communication channel is created in Integration Directory. So you are hardcoding it first.
Once you have done this changes do save and test it once again. If this works then you can change back to original and your first udf needs to be checked.
Regards,
---Satish

Error in message Mapping(file to file scenario)

Hi friends,
In file to file scenario i am getting error like this while activating standard change list in IR.
Activation of the change list canceled Check result for Message Mapping MM_file2filejuly27 | URN:file2fileJuly27.com:
Starting compilation
Compilation complete
Check result for Software Component Version praba.com | PRABA.COM | 2007 | 0:
The standard error type ExchangeLogData is not defined for the namespace URN:file2fileJuly27.com
Save the software component version definition again. The object is then saved automatically
could you help me out how to correct this error?

Prabha,
You should not delete any existing standard Data types provided by SAP. ExchangeLogData and ExchangeDaultData are standard data types get created when you create new namespace.
If you have already deleted then copy them from other Namespace to your namespace. Activate your default data type first and then your objects.
Hope this will solve your problem.
Nilesh

Error When Save Message Mapping

Hi evreybody,
I try to save my mapping. I did the test to check to know if everything is ok. The test is executed succesfully but when I try to save, I receive the following error message:
Internal error: Unable to transfer changes for object Message Mapping MM_Order_Idoc | http://accenture.com/PI01/Idoc to change list "Standard Change List" (348cd3a0-f384-11dd-c70e-003005989c0a) since object still in change list "Standard Change List" (faa66160-f699-11dd-8a1b-003005989c0a)
Thank you for your support,
Mohamed.

Release the lock by going to XI Admin page and check Integration repository and lock tab where you can see the objects locked ,release the lock and you can do the needed.
Rajesh

Message mapping changes

Similar Messages

Maybe you are looking for