Message no. AK005 - Asset is investment measure, transaction type not allow
Dear All,
I am getting following error while transfering Investment AuC to Main Asset.
Message no. AK005 - Asset is investment measure, transaction type not allow
I searched the Forum and got some input.., but in that I have a clarification.
Please see my doubt and the forum input.
Internal Order as Investment Measure:
Can you explain me Step 10. Settle the amounts to Main Asset from AuC(Prcg type: Full) - KO88 once again.
How we can give the Receiver Main Asset master in KO88. In KO88 we can only provide the Internal Order. But that Internal Order is already settled to AuC in Step 8.
Please guide me.
Thanks.
Regards,
nms
Re: Settlement of cost center to final asset ?
Posted: Oct 27, 2009 11:40 AM
Hi,
Are you doing any settlement using the AUC asset ?
Normal practice is to Create an Auc Asset and settle cost to Auc. Once the asset is ready for use, finally settle the Auc to final asset.
This can be done in two ways like - line item settlement / investment measure.
Below are steps in two scenarios :
Internal Order as Investment Measure:
1. Define the AuC Asset Class (with investment measure) - OAOA
2. Define the Asset Class u2013 for Main Asset - OAOA
3. Define Investment Profile - OITA
a. Assign the AuC Asset Class (Step-1) in the investment profile
4. Assign Investment Profile to Model Order - OITA
5. Define Order Type (Investment) - KOT2
a. Settlement Profile - OKO7
b. Maintain Allocation Structures - OKO6
c. Planning Profile - OKOS
d. Budget Profile - OKOB
6. Create an Internal Order - KO01
a. With the Investment Profile (Step-2)
b. AuC automatically created by the system using Asset Class given in the Investment Profile
7. Post the amounts to IO - FB01
8. Settle the amounts to AuC from IO (Prcg type: Automatic) - KO88
9. Create the Main Asset - AS01
10. Settle the amounts to Main Asset from AuC(Prcg type: Full) - KO88
AuC using Line Item Settlement:
1. Define the AuC Asset Class (with Line Item Settlement) - OAOA
2. Define the Asset Class u2013 for Main Asset - OAOA
3. Define Order Type (Overhead) - KOT2
4. Create an AuC-Asset (using Step-1 Asset Class) - AS01
5. Create an Internal Order - KO01
a. Assign the AuC u2013 Asset in Settlement Rule in IO
6. Post the amounts to IO - FB01
7. Settle the amounts to AuC from IO - KO88
8. Create Main Asset (using Step-2 Asset Class) - AS01
9. Assign the Main Asset in IO (Step-5) - KO02
10. Settlement AuC u2013 Line Item List - AIAB
11. Settlement AuC - Receiver - AIBU
VVR
nms,
Your message is not very clear - while you have mentioned at what stage are you getting the above-mentioned error message, you haven't mentioned exactly what you were trying to do. The fact that you are getting this error is a straight-forward indication that you are attempting to do something that SAP does expect.
However, answering your query about how to use KO88, you have to settle the AuC to a FA (fixed asset, with asset class other than AuC ), as that will close the open AuC, transfer the value from the AuC to the FA and from this point onwards, all transactions will happen to this FA. Your statement "in KO88, we can only provide the Internal Order" is incorrect.
Hope this helps.
Regards
Gulshan
Similar Messages
-
Error at the time of PO creation - Asset is investment measure, transaction
Hi all,
When am assigning the Investment Order (order for AUC) against Asset at the time of creation of Asset PO, the system throws the following error:
Asset is investment measure, transaction type not allowed
Message no. AK005
Diagnosis
Asset 1700000 0 that is to be posted is an investment measure. You are not allowed to post transactions that affect acquisition value using the current transaction.
Procedure
Check the asset and transaction type 120.System expects you to enter the Investment Order rather than the asset as account assignment object in the PO.
Regards
Sreenivas -
Error while creating PO for Asset is investment measure
Hi All,
I am getting error when I try to create PO for Asset which is investment measure.
Error is as below:-
Asset is investment measure, transaction type not allowed
Message no. AK005
Diagnosis
Asset 305000003 0 that is to be posted is an investment measure. You are not allowed to post transactions that affect acquisition value using the current transaction.
Procedure
Check the asset and transaction type 120.
I am using account assigment catergory 'A' in PO. I have checked Allowed transaction type for Acquisition and 120 is already allowed.
Please guide.Hi,
Try to create PO with account assignment category as P/N for project related ones.
If the related asset is related to Investment Measure we need to settle transactions to WBS element and from WBS element to AUC. We cannot directly post to AUC.
Thanks and Regards,
padmaja -
Migration Values on assets as investment measure
Hi Gurus,
I have a problem about AS92 for asset as investment measure. I have created a WBS in PS module with an investment profile and, when a have realised the WBS elements, the system has created assets as investment measure.
I tried to migrate values on these assets by the transaction AS92, but the system returned this message: "AY123 - Asset 599800000000 0 is a capital investment measure - not an old asset".
How can I do to migrate values on these assets without recording values on WBS element?
Thanks
NikThanks Bernhard,
I read the note that I have indicated. If I understand it is not possible to use transaction AS92 to migrate values for this type of assets.
Is it correct? According to your experience, how I can migrate those values on these assets?
Reguards
Nik -
Error: 'Transaction type not possible (no affiliated company specified)'
Hello,
I am trying to transfer an asset under construction to following asset class: 'low value assets' with ABUMN
It get the error message: 'Transaction type not possible (no affiliated company specified)'.
I could go to AO76 to mark the 'post to affiliated company'.
How can I check which transaction type it uses? With the transactio type group? Or something else...?
Regards,
PamelaHello,
actually, the problem lies with the transfer of assets under construction to low value assets with are happening in the CURRENT year, and not the previous year. AuC to LVA transfers from previous years are allowed, but not the one in the current year. Because it uses a different transfer transaction type... The transfer variant 4 (= transfer within company code) is the correct one I assume.
Regards,
Pamela -
Statement "CALL TRANSACTION" is not allowed in this form.
Hi
I have a form in which i want to call a transaction:
CALL TRANSACTION 'VL32N' USING bdc_tab
MODE 'E'
UPDATE 'S'
MESSAGES INTO mestab.
I call this report from within a message and when reaching this statement it fails.
Now i get this error in ST22:
POSTING_ILLEGAL_STATEMENT
Statement "CALL TRANSACTION" is not allowed in this form.
and afterwards this error:
DYNPRO_SEND_IN_BACKGROUND
Screen output without connection to user.
As i read,it is not allowed to call this kind of statement from within a form and we should use something like:
RECEIVE RESULTS FROM FUNCTION but i do not know how because i have never before used such call statements.
thanksHi,
The bdc table is filled correctly but the CALL TRANSACTION is not alllowed.I think it is because of the call from the Form ENTRY which is called when issuing an message from my transaction.I have read that it is not allowed to have any call transaction,submit or any other statements like these in a function call,and i think that my form ENTRY is seen as a sort of function module.
Any other opinions?
With my "call transaction" statement i wanted to open the VL32N Transaction and post a goods receipt.Is there any other way to do this?
I get this message in the ST22 Transaction:
This program is triggered in the update task. There, the
following ABAP/4 statements are not allowed:
- CALL SCREEN
- CALL DIALOG
- CALL TRANSACTION
- SUBMIT
But i do not know what is ment by update task.All i use are some "export to memory" statements and this is all.
Any ideas?
thanks.
Edited by: seba seba on Jul 28, 2009 11:22 AM -
Transaction CLM1 not allowed for notification type QL
Hello guys,
one of our user try to open the transaction CLM1/CLM2/CLM3 he getting error message Transaction CLM1 not allowed for notification type QL
please any one give solution for this issue.
find the error screen shot for your reference.
Thanks
SuryaHello Surya,
Have you done Basic configuration for Claims processing in SAP Project System.
SPRO > Project System > Claim > Notification - Claim > Notification creation
Also check config for Settings for Claims.
Refer sap help for more details
SAP Library - Claim Management
Regards
Tushar -
Leave to transaction "SAPMF05L" not allowed in batch input
Hello,
When we run FF.5 with the file sent from Itaú, it is generated a batch input for transaction FB02 which updates the reference key 1, 2 and 3 (XREF1, XREF2 and XREF3) in the documents.
There are some cases where the batch input does not update all the document items. For example, I got a document that has 32 items to be updated with the reference keys, but the update is only done in the first 14 document items. I observed that the batch input only updates up to number 14 because the standard program does not u201Cscroll the baru201D to check if there are more items in the document to be updated. The batch input is having trouble and generating some incorrect transactions and showing the error message: LEAVE TO TRANSACTION u201CSAPMF05Lu201D not allowed in batch input.
I tried to find a SAP note, but couldnu2019t find anything that was related to this. Does anyone got this problem and maybe can help me?
Thanks,
Leandroif you want to leave a batch session try "/bend" or "/n" to move to the next record.
-
I am trying to stream via ESPNWatch but I get a message saying I have a popup blocker that does not allow the streaming to happen. I unchecked the pop up blocker box in the Safari preferences to no avail. Any ideas?
Might be a Safari extension...
From your Safari menu bar click Safari > Preferences then select the Extensions tab.
If there are any extensions installed, turn that OFF, then quit and relaunch Safari to test. -
Transaction QM03 not allowed for notification type MQ
HI Dears,
The following error is appearing when i want to view my notification created through defects
Transaction QM03 not allowed for notification type MQ
How to rectify it ?
AlagesanHi,
Check IQS3 transaction also....
Cheers,
Tushar -
I have paid for a year subscription, but all the PDF's I attempt to export to Word give me a "Conversion Error" message, citing that the "file's security settings do not allow export." I want a refund. Adobe, please advise. Thank you.
Hi la recruiter,
There are a few types of files that Acrobat can't convert--and PDF files with security applied is one on them. I'm happy to cancel your subscription, if you decide that it's not going to work out for you. Please confirm that you'd like me to proceed with the cancelation, and I'll take care of it right away.
Best,
Sara -
Standard Memo Lines read account from Transaction type not from memo accoun
Standard Memo Lines read account from Transaction type not from memo account
Is There Away To Readed From Memo lines account
Facts:
Define New Standard Memo Lines with Name "Discounts"
With Type: Line
Revenue Account: 01.0.000.0000.000.411001.0000
Active Date: 01-JAN-2007
When I create transaction with class Invoice
I select the transaction type, and select customer
I press on line items button
I open the list description I select the "discount" define as memo line, I save the transactions
I press on the Complete Button
After that I navigate to Distributions button
I found the account affect not read from account define for memo lines. It read from revenue account define in transaction type
Especially when I use memo lines, how to read revenue account from account assign to memo lines not from transaction typeStandard Memo Lines read account from Transaction
type not from memo account
Is There Away To Readed From Memo lines account
Facts:
Define New Standard Memo Lines with Name "Discounts"
With Type: Line
Revenue Account: 01.0.000.0000.000.411001.0000
Active Date: 01-JAN-2007
When I create transaction with class Invoice
I select the transaction type, and select customer
I press on line items button
I open the list description I select the "discount"
define as memo line, I save the transactions
I press on the Complete Button
After that I navigate to Distributions button
I found the account affect not read from account
define for memo lines. It read from revenue account
define in transaction type
Especially when I use memo lines, how to read revenue
account from account assign to memo lines not from
transaction typeHi,
In my opinion, we need to set up AUTOACCOUNTING for 'REVENUE' as standard lines so that system picks up Revenue account from Standard memo lines instead of Transaction type.
Regards,
Sreenivas -
Asset with Investment Measure; Depreciation reversal
Hi,
An asset is created with investment measure(through settlement of WBS) in 11/2008. In the same month it was depreciated fully.
Now the users want the depreciation to be reversed. The fiscal year 2008 is already closed.
Is there any way, the asset is brought back to its original APC value and to reverse the depreciation entry?
Since the asset is created with Investment measure, it needs to be done through settlement of WBS only.
Appreciate your help
thanks
srinivasa vepaWhen you created the investment measure it created 3 transaction types like:
II1
JI1
KI1
It is possible to change them or create new ones, I can not test this in our system, perhaps you can.
To do this use the transaction: SM30 and View Cluster TABW_ALL. (this is the same as transaction OA81 but on this way you can create/change transaction types)
Copy an existing one to a Z version with the following values
Transaction type grp 52
Credit transaction
Document type AF
Do not post to Afiliated co
Post net
I used this option only as Credit transaction. (I dont know if 52 is working with credit)
Test it first in your Sandbox/ development system -
Asset Acquisition - Investment measure
Dear All,
Our client uses investment measures process for posting the acquitsition of fixed assets. We are facing a problem at the time of final settlement to the final asset. The system is not able to derive a profit center at the time of final settlement.
The following details might be useful -
1) Document splitting is active and profit center is mandatory in the document splitting settings
2) Investment order is created with Profit center A. The same is settled on an AUC periodically. Here the capitalisation entry is passed in Profit center A.
3) Two final assets are created with cost centers B & C. These are entered in the settlement rule (KOB5). When we execute the settlement we get an error saying that the profit center cannot be determined.
P.S If we put only one asset in the settlement rule, the settlement goes through smoothly. However, there is a problem - the entry is passed only in one profit center i.e. which is input in the cost center master (say B). This results in a
AUC value lying in Profit center A and the reversal of this in Profit center B.
Request you to provide a solution for this issue.
Regards,
SLSHi
Any suggestions please?
Thank you. -
ABUMN Intracompnay asset transfer error AA389 Transaction type 300 not pos
Hello,
I am getting the following error message while runinng ABUMN Transaction type 300 not possible (no affiliated company specified) Message no. AA389. Transfer variant 4 (transfer within a company) code is set as follows
Rel Type Crs-sys.ar Rel.crsyst area trans me retmt tr type acq.trasn.typ
1 * generic entry 1 300 310
2 * generic entry 2 300 310
The problem is that on t-code AO76 trans type 300 Posting type has "Post to affiliated company" and "Post gross" both checked on. In Company Code Global Data my Company code and Company are the same.
Transaction type 306 has posting type "Do not post to affiiliated co." and "Post net" checked on.
I changed transfer variant 4 to have retmt transaction type of 306 for relationship type 1 and 2 instead of 300 and I do not get an error and the posted depriciation is updated correctly.
Since 300 is the recommended SAP setting in note 327088 would their be any problem if I leave it at 306?
Thanks for any answers to this issue.Hello Murali,
Thank you for your response.
I created a new tranaction type which was a copy of 300 and clicked on
Do not post to affiliated company
Post Net
Since 300 was set up for intercompany and it resolved my issue.
Rgds,
Dan
Maybe you are looking for
-
What is the average duration of 1 full SAP life cycle or 1 end-to-end implementation. How long does it take to prepare DEV, QAS and PRD in any company?
-
I can please get my purchased items restored to my iPad.
-
Select-option + ALV on the same screen
hi, how can we can get Select-option + ALV on the same screen. Thanks, Gaurav
-
Installing classic on OS 10.4.11
I bought a dual 1.25 GHz PowerPC G4 with Mac OS X 10.4.11 I want to install Classic on it, but my Classic install disk will not bootup holding the C key. The Classic disk does not showup in the System Preference startup disk window. How can I install
-
Error 7 & MSVCR80.DLL Missing--what to do?
Unable to reinstall itunes after clicking on its update. Error 7 message appeared along with "can't start because MSVCR80.DLL IS MISSING. Reinstall it! Went to .NET Framework and message states it's already installed for 4.5.1 version and won't allo