Asset with Investment Measure; Depreciation reversal

Hi,
An asset is created with investment measure(through settlement of WBS) in 11/2008. In the same month it was depreciated fully.
Now the users want the depreciation to be reversed. The fiscal year 2008 is already closed.
Is there any way, the asset is brought back to its original APC value and to reverse the depreciation entry?
Since the asset is created with Investment measure, it needs to be done through settlement of WBS only.
Appreciate your help
thanks
srinivasa vepa

When you created the investment measure it created 3 transaction types like:
II1
JI1
KI1
It is possible to change them or create new ones, I can not test this in our system, perhaps you can.
To do this use the transaction: SM30 and View Cluster TABW_ALL. (this is the same as transaction OA81 but on this way you can create/change transaction types)
Copy an existing one to a Z version with the following values
Transaction type grp 52
Credit transaction
Document type      AF
Do not post to Afiliated  co
Post net
I used this option only as Credit transaction. (I dont know if 52 is working with credit)
Test it first in your Sandbox/ development system

Similar Messages

  • Error while creating PO for Asset is investment measure

    Hi All,
    I am getting error when I try to create PO for Asset which is investment measure.
    Error is as below:-
    Asset is investment measure, transaction type not allowed
    Message no. AK005
    Diagnosis
    Asset 305000003 0 that is to be posted is an investment measure. You are not allowed to post transactions that affect acquisition value using the current transaction.
    Procedure
    Check the asset and transaction type 120.
    I am using account assigment catergory 'A' in PO. I have checked Allowed transaction type for Acquisition and 120 is already allowed.
    Please guide.

    Hi,
    Try to create PO with account assignment category as P/N for project related ones.
    If the related asset is related to Investment Measure we need to settle transactions to WBS element and from WBS element to AUC. We cannot directly post to AUC.
    Thanks and Regards,
    padmaja

  • Message no. AK005 - Asset is investment measure, transaction type not allow

    Dear All,
    I am getting following error while transfering Investment AuC to Main Asset.
    Message no. AK005 - Asset is investment measure, transaction type not allow
    I searched the Forum and got some input.., but in that I have a clarification.
    Please see my doubt and the forum input.
    Internal Order as Investment Measure:
    Can you explain me Step 10. Settle the amounts to Main Asset from AuC(Prcg type: Full) - KO88 once again.
    How we can give the Receiver Main Asset master in KO88. In KO88 we can only provide the Internal Order. But that Internal Order is already settled to AuC in Step 8.
    Please guide me.
    Thanks.
    Regards,
    nms
    Re: Settlement of cost center to final asset ?
    Posted: Oct 27, 2009 11:40 AM
    Hi,
    Are you doing any settlement using the AUC asset ?
    Normal practice is to Create an Auc Asset and settle cost to Auc. Once the asset is ready for use, finally settle the Auc to final asset.
    This can be done in two ways like - line item settlement / investment measure.
    Below are steps in two scenarios :
    Internal Order as Investment Measure:
    1. Define the AuC Asset Class (with investment measure) - OAOA
    2. Define the Asset Class u2013 for Main Asset - OAOA
    3. Define Investment Profile - OITA
    a. Assign the AuC Asset Class (Step-1) in the investment profile
    4. Assign Investment Profile to Model Order - OITA
    5. Define Order Type (Investment) - KOT2
    a. Settlement Profile - OKO7
    b. Maintain Allocation Structures - OKO6
    c. Planning Profile - OKOS
    d. Budget Profile - OKOB
    6. Create an Internal Order - KO01
    a. With the Investment Profile (Step-2)
    b. AuC automatically created by the system using Asset Class given in the Investment Profile
    7. Post the amounts to IO - FB01
    8. Settle the amounts to AuC from IO (Prcg type: Automatic) - KO88
    9. Create the Main Asset - AS01
    10. Settle the amounts to Main Asset from AuC(Prcg type: Full) - KO88
    AuC using Line Item Settlement:
    1. Define the AuC Asset Class (with Line Item Settlement) - OAOA
    2. Define the Asset Class u2013 for Main Asset - OAOA
    3. Define Order Type (Overhead) - KOT2
    4. Create an AuC-Asset (using Step-1 Asset Class) - AS01
    5. Create an Internal Order - KO01
    a. Assign the AuC u2013 Asset in Settlement Rule in IO
    6. Post the amounts to IO - FB01
    7. Settle the amounts to AuC from IO - KO88
    8. Create Main Asset (using Step-2 Asset Class) - AS01
    9. Assign the Main Asset in IO (Step-5) - KO02
    10. Settlement AuC u2013 Line Item List - AIAB
    11. Settlement AuC - Receiver - AIBU
    VVR

    nms,
    Your message is not very clear - while you have mentioned at what stage are you getting the above-mentioned error message, you haven't mentioned exactly what you were trying to do. The fact that you are getting this error is a straight-forward indication that you are attempting to do something that SAP does expect.
    However, answering your query about how to use KO88, you have to settle the AuC to a FA (fixed asset, with asset class other than AuC ), as that will close the open AuC, transfer the value from the AuC to the FA and from this point onwards, all transactions will happen to this FA. Your statement "in KO88, we can only provide the Internal Order" is incorrect.
    Hope this helps.
    Regards
    Gulshan

  • Migration Values on assets as investment measure

    Hi Gurus,
    I have a problem about AS92 for asset as investment measure. I have created a WBS in PS module with an investment profile and, when a have realised the WBS elements, the system has created assets as investment measure.
    I tried to migrate values ​​on these assets by the transaction AS92, but the system returned this message: "AY123 - Asset 599800000000 0 is a capital investment measure - not an old asset".
    How can I do to migrate values ​​on these assets without recording values on WBS element?
    Thanks
    Nik

    Thanks Bernhard,
    I read the note that I have indicated. If I understand it is not possible to use transaction AS92 to migrate values ​​for this type of assets.
    Is it correct? According to your experience, how I can migrate those values ​​on these assets?
    Reguards
    Nik

  • Error at the time of PO creation - Asset is investment measure, transaction

    Hi all,
    When am assigning the Investment Order (order for AUC) against Asset at the time of creation of Asset PO, the system throws the following error:
    Asset is investment measure, transaction type not allowed
    Message no. AK005
    Diagnosis
    Asset 1700000 0 that is to be posted is an investment measure. You are not allowed to post transactions that affect acquisition value using the current transaction.
    Procedure
    Check the asset and transaction type 120.

    System expects you to enter the Investment Order rather than the asset as account assignment object in the PO.
    Regards
    Sreenivas

  • Asset Acquisition - Investment measure

    Dear All,
    Our client uses investment measures process for posting the acquitsition of fixed assets. We are facing a problem at the time of final settlement to the final asset. The system is not able to derive a profit center at the time of final settlement.
    The following details might be useful -
    1) Document splitting is active and profit center is mandatory in the document splitting settings
    2) Investment order is created with Profit center A. The same is settled on an AUC periodically. Here the capitalisation entry is passed in Profit center A.
    3) Two final assets are created with cost centers B & C. These are entered in the settlement rule (KOB5). When we execute the settlement we get an error saying that the profit center cannot be determined.
    P.S If we put only one asset in the settlement rule, the settlement goes through smoothly. However, there is a problem - the entry is passed only in one profit center i.e. which is input in the cost center master  (say B). This results in a
    AUC value lying in Profit center A and the reversal of this in Profit center B.
    Request you to provide a solution for this issue.
    Regards,
    SLS

    Hi
    Any suggestions please?
    Thank you.

  • Importing the (active) Fix Asset with ◦Accumulated ordinary depreciation to Sap Business One 9

    Hi all,
    I'm trying to upload the  Active Fix Asset to the SBO (no new).
    for example:
    item:                          FixAsset
    Useful life :                48 (month)
    Remaining Life:        12 (month)
    APC(Historical cost): 10000
    Accumulated Ordinary Depr.: 7500
    So  Value Balance: 1500
    and Life Balance :     12 month
    I have tried to Import active ITEM  by Excel ,follow this link : Importing Fixed Asset Master Data from Microsoft Excel - SAP Business One 9.0 - SAP Library
    every time recieve the message :
    Cannot import asset "fixasset"; a new asset's useful life and remaining life must be the same in depreciation area "AFA"

    Hi,
    Please check SAP note:
    2001876 - The system does not consider the Salvage Value nor the
    Remaining Book Value when you import assets
    Thanks & Regards,
    Nagarajan

  • Write-up depreciation of investment measure

    Hi,
    I have asset with investment measure. Is it possible to write-up the depreciation for last closed fiscal year ? How can i customize my system?
    The goal is to reduce the depreciation.
    Thank for your help.

    Hi,
    It's possible to depreciate the investment measure when you create the specific depreciate area like 51, 52 .... Then, the investment measure is depreciate as the mean asset.
    My question is how can i reversal the investment measure depreciate. For the mean asset it's possible to use T code ABZU.
    How can i customize the system for investment measure?
    Thank for your help.

  • Is it possible to do write-up of depreciation for AUC(investment measure)

    Dear All,
    In one AUC asset posted some negative value, say -7000.00. After that posted 100000 through WBS internal AUC settlement. Posted the depreciation for one month. After that they have reversed this 100000 AUC settlement. For Book deprn it is 0% rate and for Tax deprn rate is 100%. So now Book deprn NBV is coming correct as -7000.00. For Tax deprn NBV is -21000.00.
    Requirements,
    1) I want to write-up the Tax deprn posted 21000.00 then
    2) Is it possible to transfer negative value -7000.00 to new asset.
    For 1) I have tried in ABZU with T.type 712 but it is showing error as "Asset is investment measure, transaction type not allowed".
    Is there any other transaction type I can use for this or do you have any other solution for this.
    Regards
    Shanu

    Dear All,
    In one AUC asset posted some negative value, say -7000.00. After that posted 100000 through WBS internal AUC settlement. Posted the depreciation for one month. After that they have reversed this 100000 AUC settlement. For Book deprn it is 0% rate and for Tax deprn rate is 100%. So now Book deprn NBV is coming correct as -7000.00. For Tax deprn NBV is -21000.00.
    Requirements,
    1) I want to write-up the Tax deprn posted 21000.00 then
    2) Is it possible to transfer negative value -7000.00 to new asset.
    For 1) I have tried in ABZU with T.type 712 but it is showing error as "Asset is investment measure, transaction type not allowed".
    Is there any other transaction type I can use for this or do you have any other solution for this.
    Regards
    Shanu

  • Change of Cost Center in Asset Master for Investment measure (AuC) Assets.

    Hi,
    We have an asset class 4001 which has been maintained as an investment measure for AuC. I want to change cost center for all the assets that are maintained in the asset class 4001. The system is showing cost center field in display mode in change transaction of the asset AS02 for all the assets in the asset class. I want to replace the old cost center with new cost center in the asset master record. How can I make the cost center field changeable ? 
    Can anyone help me ?
    Regards,
    K.S.K

    Hi Kattula,
    We can change the cost center for AUC with Investment Measure. To do this you need to identify the relevant WBS element assigned to your asset. You can find the WBSE in Origin tab of your asset master record.
    Then go to the change WBS element Transaction CJ12 and change the cost center. Once you change the cost center of the WBSE, the change would automatically get reflected in the correspondind asset master record.
    This would solve your issue.
    Thanks & Regards
    FICO GSupport team.
    RK & IK.

  • Making interco transfers ABT1N for AuCs created as investment measures

    My client uses Investment Management (IM) for projects as investment measures. AuC assets are generated for each account assignment WBS element upon project settlement.
    Is there a way to make an intercompany asset transfer directly from one AuC (IM) asset to another via ABT1N or some other transaction, without having to settle to a final asset first? It is my understanding that this is not possible, that all posting to AuC can only be done through the WBS element, not directly to the AuC. Does any one have any suggestions/ideas about this?

    Yes, I have tried this.
    When I try to post an intercompany entry with tcode ABT1N, using AuC assets, I get the following message (which is what I would expect).
    Asset is investment measure, transaction type not allowed
    Message no. AK005
    Diagnosis
    Asset 1085 70020952-0  that is to be posted is an investment measure. You are not allowed to post transactions that affect acquisition value using the current transaction.
    Procedure
    Check the asset and transaction type 230
    I have also tried to create non-IM AuC asset classes, settle AuC balances to these, and then do the ABT1N. I also have tried to do reversals and re-postings of all the entries made to the WBS elements on the old and new company codes. These work to an extent but they are extremely cumbersome and do not meet all customer requirements.
    I was hoping someone had a similar experience and was aware of a way that I had not thought of to do a direct intercompany transfer of AuC's.

  • Retirement of an investement measure

    Good day!
    We are trying to retire an investement measure after a full settlement of an order (KO88), as we don't need it anymore and don't want someone to use the investement measure iteratively. We are using transaction ABAVN to retire the investement measure, but we get a message:
    "Asset is investment measure, transaction type not allowed".
    We tried to define transaction typed for retirements (we used special transaction type goup 26 - Retirmt of curr-yr acquis. frm inv.meas). Nothing helps, the message in ABAVN is the same.
    How can we retire an investement measure?
    Regards,
    Marianne.

    Hi,
    go to FS00 and change the Balance Sheet account to P&L account for a time being and after completing the configuration revert back those changes.
    Regards,
    Sayujya

  • Capitalization of  AUC investment  measure  to asset

    Hi,
    I created a project and then settled corresponding WBS elements to AUC investment measure using CJ88.After that i am not able to capitalize to final asset.Please help me in procedure  as I am not able to settle using normal line item settlement AUC as this is investment measure.

    Hi Prad,
    I am on 4.6C/D.
    Please check on your settings for Capitalization of AUCs created through Investment Support Measures: -
    1. Go to the IMG, Asset Accounting under Special Valuation and determine the Depreciation Areas you would like your Investment Support Measures to post to.
    2. Still in Special Valuation, define an Investment Support Key and assign it to the relevant depreciation area
    3. Also, define the relevant account determination for such posting under the Special Valuation
    4. Proceed in the same area to define the Transaction type for the Investment Support Measure by changing any of the Standard ones in there in line with your requirements
    5. Now move back to IMG, Asset Accounting then Master Data. Here you go to the screen layout and pick the relevant asset class for AUCs. Get this logical feild group and pick on the item Investment Support. Proceed to define its feild group rule as optional at the required asset maintenance level (Main Asset and/or Sub Level)
    6. Leave the IMG and access the relevant AUC's Master Data from the User Menu. Click the tab Investment Support and insert the Investment Support Key you created in note 2 above
    7. Now capitalise the AUC. Should work

  • Posting a credit to an Asset created by a project i.e Investment measure

    Can anyone help with this.  i am trying to post a credit to an Investment measure using f-02.  I want to create a transaction type that will work but I am not sure what the entries in this transaction type should be.  Any ideas?

    That's exactly what I am trying to do in f-02 with ttype 100 but I get the message, asset is an investment measure, transaction type not allowed.  Am I using the wrong t- code or the wrong transaction type?

  • Problem with depreciation posting for an asset with a '0' net book value.

    Hi,
    I have a problem with depreciation posting on one asset. I think it should not be calculated and posted at all.
    On 1st November 2010 (our Fiscal year starts on 1st November) there was acquisition posted to an asset and then it was reversed on the same day - so the net book value was '0'.
    In AFAB depreciation run for April 2011 - it posted depreciatoion of 0.01 Euro, so now the book value is -0.01.
    Do you know how this could have happened and what can I do to get the value of this asset back to 0?
    Thank you,
    Karol

    Hi Murlidhar,
    Thank you for your reply.
    I just have one doubt - as depreciation of 0.01 Eur was posted in previous period leaving net value of asset equal to -0.01 Eur.
    Shouldn't I get ritd of this asset value before I proceed with the steps you suggested?
    I think it is not possible to reverse the depreciation - so I struggle to find a way to bring asset value back to zero.
    Thank you,
    Karol

Maybe you are looking for