Message no. V1423 in VA01 while saving

Hello Experts,
I'm stuck in one problem. Urgent help required.
Tcode: va01
Order type : zzcr
sales org: fr02 enter
Sold to party : xxxxx is entered and save throws error:
Message no. V1423
But there is no block on this cust (sold-to-party) still this error. Instead of thiserror, a warning should come : Customer xxxx is marked for deletion.
And if same order type and sales org is entered with distribution channel and division and same sold-to-party,
example:
Tcode:va01
Order type : zzcr
sales org: fr02
Distribution channel: 03
Division: 01
enter
sold to party:xxxxx(same as above) is entered and save. it shows following warning message:
Customer xxxx is marked for deletion.   (This is correct)
So my query is, why message no. V1423 is appearing only when order type and sales org is entered. It should give warning message:
Customer xxxx is marked for deletion.  
I have tried finding in user exit MV45AFZZ subroutine USEREXIT_SAVE_DOCUMENT but I'm not able to find anything. In debugging, after save, it is not going into debugger to check where exactly the problem is happening.
Please tell me, where to check this error?
Its very urgent.
Regards,
Titiksha

I feel, system is validating only Header Division and since it might be deviating in your case, it is giving the error message in the first instance and when it matches, it is giving a warning message.  You may also have a look at the following OSS note
Note 304031 - Incorrect check for order block
G. Lakshmipathi

Similar Messages

  • Ship to party and sold to party changes to same value in VA01 while saving

    Hi Team,
    In VA01 transaction, i am trying to create an Order with oen Order Type.
    Now in the second screen, if i give the ship to party as 123 and the Sold to party as 456 and if i give an item number and material number with quantity something and if I press the Enter button
    The ship to party and sold to party changes to the same number 123, 123.
    Why is this happening? I have done a debug and found out it is because of the XVBPA internal table getting modified.....
    Is there any Custom table or settings that has to be tweaked?
    Thanks,
    S.Dakshna Nagaratnam.

    Check whether any user exit is being triggered while u save the data.....

  • Getting Error as Limits Not Defined while saving IT_0008

    Hi Folks..
    I am getting a message as "Limits not defined" while saving infotype basic pay our client payroll is international (it is a green colour message only) but i am unable to save the infotype entry. Request you to please advice me where to check to get resolve of this issue.
    Thanks
    sap_hr

    just a shot in the dark... due to lack of information
    i assume you use T710 for basic wage, there you should define the lower and upper limit for the payment. if these are not available for the entered payscale and level this message can occur

  • Error message while saving the sales order

    hi all,
    i have maintained a material material master, sold to  etc  pr00 conditions maintained, schedule line is determined correctly  but i am still getting this message while saving the order
    "Product 234345 does not have schedules assigned. Contact system administrator
    Message no. ZV276"
    can anybody help?
    Sa

    Suman,
    i would suggest you please sit with your abaper he can might be solved your issue.
    because Message no. ZV276 seems to be comes from user-exit which you implement for VA01/VA02 Tx.
    Amit.

  • Error while saving a Entry through view cluster ( getting TK 319 message)

    We are  facing an issue while saving the entry in one of the view at the lowest level of the three level View cluster.
    Please find the Details of view Cluster below.
    1)First level- Key  => MANDT( CLNT, 3) + RULE_ID( CHAR , 20) .
    2)Second level-Key =>MANDT( CLNT, 3) + RULE_ID( CHAR , 20) + LOCATION_TYPE (CHAR , 20) + START_DATE( DATS ,8).
    3)Third level (Lowest level  )-key => MANDT( CLNT, 3) + RULE_ID( CHAR , 20) + LOCATION_TYPE (CHAR , 20) + MEAL_RULE_TYPE( INT1 ,3) +  START_DATE( DATS ,8) .
    we are not able to save the Entry at the Third level  and is getting the  Message "Fill table key for table ITC_CALCRULE_ML only up to position 044 only " .
    As per our understanding problem is that " the transport interface is called with a incorrect object key for table ITC_CALCRULE_ML  "  . we thaught of either reduce the width of the key or if we want
    to define also  the date, by  changing the order of MEAL_RULE_TYPE and START_DATE .Also we could use a CHAR1 instead of the INT1 for the MEAL_RULE_TYPE.
    After analyzing  this  we came to a conclusion that we have two solutions for solving it.
    1) Database Design Change : Which is generally not preferable.
    2) Apply the Event  12  ( After changing the key entries for the change task (E071K) ) on the view and in its code we reduce the Object key width for the Transport Organizer  and
        would be able to save the entry in the database  and would be able to transport the entries to our Q-system.

    Hi. Were you able to fix the error?

  • Error message while saving a sales order "Product 10069995 does not have sc

    hi Friends,
    i am creating an order , enter the material,quantity, batch , correct price everything etc etc. while saving the order it gives an error message "Product 10069995 does not have schedules assigned"

    Hi Suman
    Use transaction code OMJJ and check the "Allowed Transactions" for customizing movement types.
    Kalpesh

  • Error while saving the documents in Transactions MIRO,VA02, VA01, ects

    Hi SAP Gurus,
    i am geting an popup error while saving or after changing the documents in MIRO VA01, VA02 transactions..
    The error is  * " Condition Table Missing : Access JST1 60 ( Pricing Taxes ) " *
    can u please help me out.
    Regards
    Kumar m

    Hi,
    Found a note explaining the significance of these errors.
    It says:
    "NZE-28862: SSL connection failed
    Cause: This error occurred because the peer closed the connection.
    Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
    For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
    Thanks & Regards,
    Sindhiya V.

  • While saving PO the error in message is &5&6&7&8? What it means?

    Hi All,
    While saving PO the error in message is &5&6&7&8? What it means?
    I am working with the US Tax procedure TAXUSJ.
    I saved the purchase order without giving the tax code and with jurisdiction in PO, Incompletion populated as above message and after save po number end up with message termination with following message.
    Error Info...   FF 718: Tax code & does not exist for jurisdiction code &
    Can any body suggest me to fix this problem.
    Thanks in Advance,
    Lawrence Reddy.

    Hi,
    First check in t.code:OX10, jurisdiction code TAXUSJ is assigned to your plant or not, if not assign it and save.
    Now use t.code: OBCL & assign your tax code {see tax code must be input tax} with jurisdiction code TAXUSJ to your company code and save.
    Now try creating PO.
    NOTE:
    Also check all t.codes with assignments:
    1.OBBG,
    2.OBCO,
    3.OBYZ,
    4.OBCN,.
    Regards,
    Biju K

  • Error Message While Saving Data : ORA-00372

    Hi,
    I am Getting this Error Message while Saving the data from frontend.
    ORA-00372: file 5 cannot be modified at this time
    ORA-01110: data file 5: '/db/d401/CHG_arsystem_01.dbf'
    Thanks.

    This might be the case when DBA is trying to make tablespce read only and some transaction is waiting for commit read only command is in hang state.
    Check with your DBA to know the datafile status.
    Dilipkumar Patel.

  • Stop Message while saving Service Order from IW51

    Hello,
    I am getting bleow error while saving service order.
    System: Status object does not exist. Message Numner IW351
    Actually I have done one enhcement in the User exit of the Sales order in the form Routine...
    USEREXIT_SAVE_DOCUMENT_PREPARE
    From this depending upon the some validation i am populating Error message,
    I am creating sales order through service order from the Transaction IW51.
    When i Try to save the service order i get the error messages which is coming from my validation which
    I had put in the MV45AFZZ.
    After the error messgae i press ENTER and then try to change the order by clcicking on the advance shipment.
    As soon as i click on that i get a STOP messgae.
    Which i as below.
    System: Status object does not exist
    I m not getting why it is coming.
    Kindly Help.
    Regards
    Sachin

    Hi,
    After MESSAGE add STOP. :
    MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
    STOP.
    or If ambiguity with usage of  STOP being obselete use EXIT after message.
    MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
    EXIT.
    BR
    Dep

  • Connection Timed Out error while saving messages in Solution Database

    Dear Experts,
    I have configured trex in solution manager..while saving service messages in 'Solution Database' i used to get "page cannot be displayed" now iam getting the fallowing error..please suggest any changes required..
    500 Connection timed out
    Error: -5
    Version: 7000
    Component: ICM
    Date/Time: Thu May 14 15:11:24 2009 
    Module: icxxthr.c
    Line: 2698
    Server: Host_<SID>_<Sys no>
    Error Tag: {-}
    Detail: Connection to partner timed out after 60s
    Regards,
    Babu

    Hi Babu,
    you might try the following on the server where the problem occurred: call transaction SMICM -> Goto Services -> Select the service you are working with ->
    Service Change -> increase value for "Max. Processing Time"
    In case your application still times out you should see the changed value displayed.
    Sometimes just executing the application again 2-4 times might help, because compiling might happen and is taking some time in the system.
    With regards to parameters see also SAP Note [824554|https://service.sap.com/sap/support/notes/824554].
    Best regards,
      Andreas

  • While saving the sales order through Va01 and Va02 and email has to send

    Hi Experts,
    My requirement is to send an email with PDF formatted display of the Sales order to the sold to party's email id while saving the Salesorder through Va01 and Va02.
    I need the following .
    How to send an email with PDF formatted attachment of Salesorder display ? (we have done the formatting of display through SMARTFORMS )
    I think we can do it by userexits program name is MV45AFZZ while saving the document.
    Please suggest me the best possible way.
    Thanks ,
    Saritha

    Hi, there is no need for a customer devlopment on this. A standard smartform output will do with output medium '5' (external send). Then the smartform output will be send as PDF to the e-mail address in the output partner. Have a look at transaction NACE.
    Regards Jack

  • Find out user exits which should trigger while saving billing doc.(VA01)

    Hi All,
    please can u help me to find out user exits which should trigger while saving billing documents for VA01 transaction...I have already z report to find the user-exit for any transaction.I have tried in that also.
    Reply
    Ulhas

    Hi
    Try these
    USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ)                    
    The internal number range used in the standard system is specified                
    in the billing type table and can be changed in this user exit. This              
    user exit is only called when the billing documents is created.                                                                               
    USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program                       
    RV60AFZZ)                                                                         
    In this user exit additional fields for account determination that                
    are not provided in the standard system are copied into                           
    communication structure KOMKCV (header fields).                                                                               
    USEREXIT_ACCOUNT_PREP_KOMPCV (Module pool SAPLV60A)                               
    In this user exit additional fields for account determination that                
    are not provided in the standard system are copied into                           
    communication structure KOMPCV (item fields).                                                                               
    USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program                     
    RV60AFZC)                                                                         
    Depending on the number range, table TVFKD is used to set the                     
    billing date (country-specific requirments in Italy).                             
    USEREXIT_NUMBER_RANGE is automatically deactivated when this user                 
    exit is being applied.                                                                               
    USEREXIT_FILL_VBRK_VBRP (Module pool SAPLV60A, program RV60AFZC)                  
    This user exit is only called when the billing document is created.               
    It is used to provide the header and the item of the new billing                  
    document with deviating or additional data.                                       
      USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB)                    
      Printing the item line of a billing document can be supplemented or             
      changed.                                                                               
    USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)                     
      Printing the header line of a billing document can be supplemented              
      or changed.                                                                               
    User exits in program RV60AFZD                                                  
      Short descriptions of the user exits are contained in the program:                                                                               
    -   USEREXIT_RELI_XVBPAK_AVBPAK                                                                               
    -   USEREXIT_NEWROLE_XVBPAK_AVBPAK                                                                               
    -   USEREXIT_NEWROLE_XVBPAP_AVBPAK                                                                               
    e following user exits are available in report SAPLV60B for transfer              
    accounting (function group V60B):                                                                               
    EXIT_SAPLV60B_001: Change the header data in the structure acchd                
      You can use this exit to influence the header information of the                
      accounting document. For example, you can change the business                   
      transaction, "created on" date and time, the name of the person who             
      created it or the transaction with which the document was created.                                                                               
    EXIT_SAPLV60B_002: Change the customer line ACCIT                               
      You can use this exit to change the customer line in the accounting             
      document. This exit is processed once the ACCIT structure is filled             
      in with data from document header VBRK.                                                                               
    EXIT_SAPLV60B_003: Change the customer line in costing                          
      The customer line is filled in differently for costing. You can use             
      exit 003 to influence the ACCIT structure.                                                                               
    EXIT_SAPLV60B_004: Change a GL account item ACCIT You can add          
    information to a GL account item (such as quantity specifications)     
    with this exit.                                                                               
    EXIT_SAPLV60B_005: User exit for accruals                              
    Once all relevant data for accruals was entered in the GL account      
    item, you can add to this data with this exit.                                                                               
    EXIT_SAPLV60B_006: Change the control line ACCIT                       
    You can use exit 006 to add information to the control line.                                                                               
    EXIT_SAPLV60B_007: Change the installment plan                         
    You can use exit 007 to add information to the installment plan        
    parameters in the GL account item.                                                                               
    EXIT_SAPLV60B_008: Change the transfer structure ACCCR, ACCIT and      
    ACCHD                                                                  
    After the accounting document is filled in with data, you can use      
    exit 008 to change the document once again.                                                                               
    EXIT_SAPLV60B_010: Item table for customer lines                       
    You can use exit 10 to influence the contents of customer lines        
    before they are created.                                                                               
    EXIT_SAPLV60B_0011: Change the parameter for cash account              
    determination or reconciliation account determination                  
    You can use this exit to change inbound parameters in order to         
    influence account determination.                                       
    >                                                                      
    Thanks
    Shiva

  • Error message while saving Webapplication

    Hi Experts,
    I'm learning SAP BI from SAP Help.
    while trying to do create a web application i have struct up with a message while saving the web application "RSOBJS 171 Unable to generate History Entry" .
    and when i'm trying to execute it is showing the below message in the BEx Launcher
    " Exception in BI runtime
      Initial cause
      Message:
      No message was provided.
    Stack trace:
    java.lang.ClassCastException "
    can anybody help what i should do to proceed further and execute the application.
    thanks in advance.
    Regards,
    Pavani.

    Hi Pavani,
    Please look over the notes: 944370 & 573284.
    Symptom:
    When saving an object (Query, Workbook, Webtemplates) in BI 7.0 system using BEx Tools, the user receives a message saying "Unable to generate history entry".
    Additionally, the user does not see any History entry in Web application designer, and the open dialog shows no history entry in any of the BEx tools.
    Other terms
    Reason:
    Personalization has not yet been activated in the current BW system.
    Solution:
    - Logon to SAP GUI
    - enter t-code RS_PERS_ACTIVATE to go into Activating Personalization in BEx view.
    Here you select all check-boxes and Execute (F8).
    Relogon to WAD and you'll not get that error.
    Cheers,
    Nhan Phan

  • Error message while saving cryrstal report

    Hi Experts,
    following error message occured while safing a crystalo report:
    "an error occured while safing and/or publish. The return code 503 was returned from the server. Report ID entered is invalid"
    in the pop-up "Save to BW options" I have choosen "automatically publish to Enterprise" and I named my report IBU_TLS_EAM. should I have to choose another name? and if yes, why? I am asking because of the error message saying "report id entered invalid".
    thank you in advance and regards,
    H.-J. Kersten
    note: I tried it again with the name "test" instead of "IBU_TLS_EAM" and while saving now it showed the error message "an error occured while safing and/or publishing. The return code 471 was returned from the server"
    Please help
    Edited by: Hans-Joerg Kersten  on Feb 26, 2009 3:00 PM

    Please re-post if this is still an issue to the Business Objects Forum or if you have a valid support contract create a case on line

Maybe you are looking for