Message server not starting
Hi
When i started SAPMMC database getting up. but message server not starting. What will be the problem.
Regards
Basis Cons
Hi Ganesh,
First place to look is in the SAPMMC Console and see whats the status of the processes specially if they are yellow. Then you can go and check the work directory and check dev_ms for errors in the message server, dev_disp for errors in the dispatcher and dev_w* for errors in the workprocesses. the work directory is located at <drive>:\usr\sap\<sid>\<instance>\work.
If the message server is not starting i will look first at the dev_ms and look for the error.
Hope this help!
Juan
Please reward with points if helpful
Similar Messages
-
Server not starting after kernel upgrade
Hi,
I did a SAP Kernel upgrade of Patch 146 in NW2004s Unicode system
After the kernel upgrade, the SAP is not starting
Pls let me know of what can be teh reason
The following is dev_disp file
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid BWS
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 146
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 2204
Mon Jun 16 13:02:04 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 2204) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 146 successfully loaded
shared lib "dw_xtc.dll" version 146 successfully loaded
shared lib "dw_stl.dll" version 146 successfully loaded
shared lib "dw_gui.dll" version 146 successfully loaded
shared lib "dw_mdm.dll" version 146 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Mon Jun 16 13:02:09 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >WDBSSAPBWS01_BWS_01 <
DpShMCreate: sizeof(wp_adm) 23680 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE80050, size: 6347104)
DpShMCreate: allocated sys_adm at 000000000EE80050
DpShMCreate: allocated wp_adm at 000000000EE82150
DpShMCreate: allocated tm_adm_list at 000000000EE87DD0
DpShMCreate: allocated tm_adm at 000000000EE87E30
DpShMCreate: allocated wp_ca_adm at 000000000F3EBCD0
DpShMCreate: allocated appc_ca_adm at 000000000F3F1A90
DpShMCreate: allocated comm_adm at 000000000F3F39D0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F47A660
DpShMCreate: allocated gw_adm at 000000000F47A6E0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F47A710
DpShMCreate: allocated wall_adm at 000000000F47A720
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3496
argv[0] = D:\usr\sap\BWS\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\BWS\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\BWS\SYS\profile\BWS_DVEBMGS01_WDBSSAPBWS01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=BWS
argv[7] = -DSAPMYNAME=WDBSSAPBWS01_BWS_01
argv[8] = -DSAPPROFILE=D:\usr\sap\BWS\SYS\profile\BWS_DVEBMGS01_WDBSSAPBWS01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1633]
***LOG Q0K=> DpMsAttach, mscon ( WDBSSAPBWS01) [dpxxdisp.c 11822]
DpStartStopMsg: send start message (myname is >WDBSSAPBWS01_BWS_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 146
Release check o.K.
Mon Jun 16 13:02:11 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4424]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 340
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:2447) [nixxi.cpp 4424]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3496)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Jun 16 13:02:49 2008
ERROR => DpHdlDeadWp: W0 (pid 3504) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W1 (pid 3380) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W2 (pid 4348) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W3 (pid 3528) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W4 (pid 4528) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W5 (pid 4360) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W6 (pid 788) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W7 (pid 4432) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W8 (pid 3376) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W9 (pid 3632) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W10 (pid 3928) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W11 (pid 3304) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W12 (pid 3316) died [dpxxdisp.c 14532]
ERROR => DpHdlDeadWp: W13 (pid 4956) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W14 (pid 1136) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W15 (pid 4968) died [dpxxdisp.c 14532]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:02:59 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Mon Jun 16 17:02:59 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3504 Ended no 1 0 0
1 DIA 3380 Ended no 1 0 0
2 DIA 4348 Ended no 1 0 0
3 DIA 3528 Ended no 1 0 0
4 DIA 4528 Ended no 1 0 0
5 DIA 4360 Ended no 1 0 0
6 DIA 788 Ended no 1 0 0
7 DIA 4432 Ended no 1 0 0
8 UPD 3376 Ended no 1 0 0
9 ENQ 3632 Ended no 1 0 0
10 BTC 3928 Ended no 1 0 0
11 BTC 3304 Ended no 1 0 0
12 BTC 3316 Ended no 1 0 0
13 BTC 4956 Ended no 1 0 0
14 SPO 1136 Ended no 1 0 0
15 UP2 4968 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jun 16 17:02:59 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Mon Jun 16 17:02:59 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jun 16 17:02:59 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:04 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >WDBSSAPBWS01_BWS_01 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1724) (SOFT_KILL)
Stop icman
killing process (2860) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1724 HANDLE:448)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:05 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1724 HANDLE:448)
wait for end of icman
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:06 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:07 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:08 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:09 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:10 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:11 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:12 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:13 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:14 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:15 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:2860 HANDLE:456)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=481
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jun 16 13:03:16 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2860 HANDLE:456)
[DpProcDied] Process died (PID:3496 HANDLE:432)
DpStartStopMsg: send stop message (myname is >WDBSSAPBWS01_BWS_01 <)
NiIMyHostName: hostname = 'WDBSSAPBWS01'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Mon Jun 16 13:03:17 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12168]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 364 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 364 (pos=3)
SiSelNRemove: removed sock 364
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/16
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 364
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2204) [dpxxdisp.c 10421]
Good Bye .....Are you sure the Database and the listeners are up and running?
-
when i first click on Firefox the URL: www.27yhbnhy6tfgvrbcfre3.com shows up and the error message "Server not Found". but i can connect to any website by just clicking on a bookmark from the toolbar (or typing in a url). this never happened with previous versions of Firefox
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode -
I have dial up - once I connect to the internet, I get the message server not found and am unable to go anywhere on the internet. This started trying to load my banks online site and started about a week ago. I've tried freeing popup blocker, gone through the settings with a bank IT specialist, tried to us IE which has resulted in a request for a cable and now no access to any website. Any suggestions appreciated. Thanks
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.<br />
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
* https://support.mozilla.com/kb/Server+not+found
* https://support.mozilla.com/kb/Firewalls -
However, I think the problem is the edge server not starting.
I looked in the logs directory and found the core log, the master log.
I also found /var/log/messages.
Shouldn't there be an edge log?
I did this from the readme:
sudo ./fmsmgr server fms start
udo ./fmsmgr adminserver startrats, hit the wrong button
here is the rest of the report
I did this
sudo ./fmsmgr server fms start
sudo ./fmsmgr adminserver start
sudo ./server start
The master.log:
#Date: 2011-07-21
#Fields: date time x-pid x-status x-ctx x-comment
2011-07-21 16:34:35 26286 (i)2581173 FMS detected IPv6 protocol stack! -
2011-07-21 16:34:35 26286 (i)2581173 FMS config <NetworkingIPv6 enable=false> -
2011-07-21 16:34:35 26286 (i)2581173 FMS running in IPv4 protocol stack mode! -
2011-07-21 16:34:35 26286 (i)2581173 Host: bastet.cam.corp.google.com IPv4: 172.31.194.67 -
2011-07-21 16:34:35 26286 (i)2571011 Server starting... -
2011-07-21 16:34:35 26286 (i)2581224 Edge (26306) started, arguments : -edgeports ":1935,80" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1". -
2011-07-21 16:34:35 26286 (i)2571111 Server started (/opt/adobe/fms/conf/Server.xml). -
2011-07-21 16:34:40 26286 (i)2581226 Edge (26306) is no longer active. -
#Date: 2011-07-21
#Fields: date time x-pid x-status x-ctx x-comment
2011-07-21 16:36:16 26713 (i)2581173 FMS detected IPv6 protocol stack! -
2011-07-21 16:36:16 26713 (i)2581173 FMS config <NetworkingIPv6 enable=false> -
2011-07-21 16:36:16 26713 (i)2581173 FMS running in IPv4 protocol stack mode! -
2011-07-21 16:36:16 26713 (i)2581173 Host: bastet.cam.corp.google.com IPv4: 172.31.194.67 -
2011-07-21 16:36:16 26713 (i)2571011 Server starting... -
2011-07-21 16:36:16 26713 (e)2571122 Server aborted. -
The /var/log/messages output shows "Server starting ..." messages.
When I do the ps:
ps auxww | grep adobe
nobody 19178 0.0 0.0 203444 11124 pts/2 Sl 16:03 0:00 /opt/adobe/fms/fmscore -adaptor _defaultRoot_ -vhost _defaultVHost_ -app registry -inst registry -tag -console -conf /opt/adobe/fms/conf/Server.xml -name _defaultRoot_:_defaultVHost_:registry:registry:
I expected to see the fmsedge binary.
lsof doesn't show anybody listening on 1935 as I expected for an rtmp server. -
System Landscape Directory server not started
Hi,
We are running Solution Manager 4.0 SP13.
When I log ito the NWA get the message : System Landscape Directory server not started
We are trying to configure CEN but only the Local System can be administered.
If I goto the Central SLD and login - Administration - Server Started.
If I look at the ABAP - Transaction SLDAPICUST - save configuration - all ok
I goto the Jco Connectors and ensure all Jco Connections are configured: SAPSLDAPI_SID
ABAP RFCs; All configured
ABAP - Transaction - sldcheck .. it returns with success.
I login to the ABAP stack - smgw - logged in clients and all Jco Connections are available
I go into the J2ee Admin - navigate to the SLD Data supplier - all tests return success.
The SLD CIM is version 1.5.20
The application com.sap.engine.class.download is started ( Note 1017526 )
However when I login to with the J2ee_admin tool the following is missing from the CIM Client:
sap.com/tclmwebadminmainframewd/webdynpro/public/lib/app.jar
sap.com/tclmwebadminsldwd/webdynpro/public/lib/app.jar
Please help.Hi Anand,
I verified the SLD Post Processing doc in case I missed something. The doc I used:
https://websmp106.sap-ag.de/~sapidb/011000358700003772372006E
I went through every point in the doc and verified that it was completed .
If I open Monitoring Setup Guide for SAP NetWeaver 7.0 SP Stack 12 ( Can't find 13 ) I go to page 68 :
6.5.2. Configuring the Connection Between CEN and the SLD ... I have followed all the steps without any error.:
I followed it Step-by-Step.... however the following CIM Client Genearations do not exist:
sap.com/tclmwebadminmainframewd/webdynpro/public/lib/app.jar
sap.com/tclmwebadminsldwd/webdynpro/public/lib/app.jar
What is available and Activated :
sap.com/tclmwebadminmainframewd/webdynpro/public/lib/sap.comtclmwebadminmainframe~wd.jar
sap.com/tclmwebadminsldwd/webdynpro/public/lib/sap.comtclmwebadminsld~wd.jar
I alos Decided for the purpose of Troubleshooting to Activate All:
sap.com/tclmwebadmin~mainframe.......
sap.com/tclmwebadmin~sld..........
When I go into NWA .. its still says SLD Not started.
If I go inot the J2ee Admin Tool - SLD Data Supplier - Trigger Data Transfer OK
I goto the SLD - Administration . SLD Started
I Can see all the Techinical systems - ABAP and Java.
All business Systems are there
SLDCHECK works fine .. no errors !
But I can't change the status of the NWA System Landscape Selectipon From Local to Central.
Warning / Error :
System Landscape Directory server not started
and
Only local system can be administered
I maybe missing something but I can't see what it is....
Further Help required ! -
Application server not starting - I have given the dispatcher log below
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid P1D
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 2800
Wed Apr 07 16:09:05 2010
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2800) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Apr 07 16:09:10 2010
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >blrkec115278d_P1D_00 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06640040, size: 4653368)
DpShMCreate: allocated sys_adm at 06640040
DpShMCreate: allocated wp_adm at 06641E40
DpShMCreate: allocated tm_adm_list at 066465C0
DpShMCreate: allocated tm_adm at 066465F0
DpShMCreate: allocated wp_ca_adm at 06A15890
DpShMCreate: allocated appc_ca_adm at 06A1B650
DpShMCreate: allocated comm_adm at 06A1D590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06A9E450
DpShMCreate: allocated gw_adm at 06A9E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06A9E4C0
DpShMCreate: allocated wall_adm at 06A9E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1216
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:11 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:12 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:13 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:14 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:15 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:16 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:272 HANDLE:1560)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1585
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Apr 07 16:10:17 2010
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:272 HANDLE:1560)
[DpProcDied] Process died (PID:1216 HANDLE:1540)
DpStartStopMsg: send stop message (myname is >blrkec115278d_P1D_00 <)
NiIMyHostName: hostname = 'blrkec115278d'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Wed Apr 07 16:10:18 2010
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11899]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1484 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1484 (pos=3)
SiSelNRemove: removed sock 1484
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1484
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2800) [dpxxdisp.c 10259]
Good Bye .....trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Wed Apr 07 16:09:10 2010
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\P1D\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\P1D\DVEBMGS00\exe\dboraslib.dll' loaded B Version of 'D:\usr\sap\P1D\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.73) B New connection 0 created
M sysno 00
M sid P1D
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 75
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 3784
M
M kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC) M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3784) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active M DpShMCreate: sizeof(wp_adm) 18304 (1408) M DpShMCreate: sizeof(tm_adm) 3994272 (19872) M DpShMCreate: sizeof(wp_ca_adm) 24000 (80) M DpShMCreate: sizeof(appc_ca_adm) 8000 (80) M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048) M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72) M DpShMCreate: sizeof(vmc_adm) 0 (1440) M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184) M DpShMCreate: sizeof(gw_adm) 48 M DpShMCreate: SHM_DP_ADM_KEY (addr: 06640040, size: 4653368) M DpShMCreate: allocated sys_adm at 06640040 M DpShMCreate: allocated wp_adm at 06641E40 M DpShMCreate: allocated tm_adm_list at 066465C0 M DpShMCreate: allocated tm_adm at 066465F0 M DpShMCreate: allocated wp_ca_adm at 06A15890 M DpShMCreate: allocated appc_ca_adm at 06A1B650 M DpShMCreate: allocated comm_adm at 06A1D590 M DpShMCreate: system runs without file table M DpShMCreate: allocated vmc_adm_list at 06A9E450 M DpShMCreate: allocated gw_adm at 06A9E490 M DpShMCreate: system runs without vmc_adm M DpShMCreate: allocated ca_info at 06A9E4C0 M DpShMCreate: allocated wall_adm at 06A9E4C8 X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default X ES initialized.
M
M Wed Apr 07 16:09:11 2010
M ThInit: running on host blrkec115278d M M Wed Apr 07 16:09:12 2010 M calling db_connect ...
C Prepending D:\usr\sap\P1D\DVEBMGS00\exe to Path.
C
C Wed Apr 07 16:09:13 2010
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8 C Logon as OPS$-user to get SAPSR3's password C Connecting as /@P1D on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06BF10F8 06BF6694 06BF5F1C
C Attaching to DB Server P1D (con_hdl=0,svchp=06BF5E68,svrhp=06C07734)
C
C Wed Apr 07 16:09:14 2010
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12541'
[dbsloci.c 10933]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@P1D on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06BF10F8 06BF6694 06BF5F1C
C Detaching from DB Server (con_hdl=0,svchp=06BF5E68,srvhp=06C07734)
C Attaching to DB Server P1D (con_hdl=0,svchp=06BF5E68,svrhp=06C07734)
C
C Wed Apr 07 16:09:16 2010
C *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
[dboci.c 4172]
C *** ERROR => CONNECT failed with sql error '12541'
[dbsloci.c 10933]
B ***LOG BY2=> sql error 12541 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> ORA-12541: TNS:no listener [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 12541 performing CON [dblink#3 @ 431] [dblink 0431 ] B ***LOG BY0=> ORA-12541: TNS:no listener [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10156]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server blrkec115278d_P1D_00 on host blrkec115278d (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Wed Apr 07 16:09:16 2010
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics M Entering TH_CALLHOOKS M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260] M Entering ThSetStatError M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0) M Entering ThReadDetachMode M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3784) [dpnttool.c 327] -
Dispatcher running but message server not connected
Hi Guys,
I installed SAP netweaver 7.01 trial version and using MaxDB as database server.
When I start the NSB using SAPMMC, the message server is running but the disp+work.EXE is not working properly. It sometimes shows the status 'Running but message server not connected' and sometimes 'Running but que standstill'. It would be a great help if you could guide me to the solution of this problem.
DEV_MS file:-
trc file: "dev_ms", trc level: 1, release: "701"
[Thr 2148] Sat May 14 18:02:00 2011
[Thr 2148] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 0
intno 20020600
make: multithreaded, ASCII, optimized
pid 1484
[Thr 2148] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 1484) [msxxserv.c 1853]
[Thr 2148] MsInitAclInfo: acl file F:\SAP\NSP\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 2148] MsGetOwnIpAddr: my host addresses are :
[Thr 2148] 1 : [10.10.0.10] DESKTOP5 (HOSTNAME)
[Thr 2148] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 2148] 3 : [192.168.1.8] desktop5 (NILIST)
[Thr 2148] Sat May 14 18:02:01 2011
[Thr 2148] MsHttpInit: full qualified hostname = desktop5
[Thr 2148] HTTP logging is switch off
[Thr 2148] set HTTP state to LISTEN
[Thr 2148] ms/icf_info_server : deleted
[Thr 2148] *** I listen to port sapmsNSP (3600) ***
[Thr 2148] *** I listen to internal port 3900 (3900) ***
[Thr 2148] *** HTTP port 8100 state LISTEN ***
[Thr 2148] CUSTOMER KEY: >S1138463071<
[Thr 2148] build version=701.2008.03.06
[Thr 2148] Sat May 14 18:03:20 2011
[Thr 2148] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from desktop5_NSP_00 [msxxserv.c 4711]DEV_DISP file:-
trc file: "dev_disp", trc level: 1, release: "701"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 7
intno 20020600
make: multithreaded, ASCII, optimized
pid 2740
Sat May 14 18:02:02 2011
kernel runs with dp version 240(ext=110) (@(#) DPLIB-INT-VERSION-240)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2740) [dpxxdisp.c 1257]
shared lib "dw_xml.dll" version 7 successfully loaded
shared lib "dw_xtc.dll" version 7 successfully loaded
shared lib "dw_stl.dll" version 7 successfully loaded
shared lib "dw_gui.dll" version 7 successfully loaded
shared lib "dw_mdm.dll" version 7 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Sat May 14 18:02:11 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 9 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5529]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >desktop5_NSP_00 <
DpShMCreate: sizeof(wp_adm) 8232 (1176)
DpShMCreate: sizeof(tm_adm) 3786880 (18840)
DpShMCreate: sizeof(wp_ca_adm) 1280 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 057F0040, size: 4389744)
DpShMCreate: allocated sys_adm at 057F0040
DpShMCreate: allocated wp_adm at 057F1BF8
DpShMCreate: allocated tm_adm_list at 057F3C20
DpShMCreate: allocated tm_adm at 057F3C50
DpShMCreate: allocated wp_ca_adm at 05B904D0
DpShMCreate: allocated appc_ca_adm at 05B909D0
DpShMCreate: allocated comm_adm at 05B90E80
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05C11D30
DpShMCreate: allocated gw_adm at 05C11D70
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05C11DA0
DpShMCreate: allocated wall_adm at 05C11DA8
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
Sat May 14 18:02:12 2011
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
Sat May 14 18:02:13 2011
***LOG Q0K=> DpMsAttach, mscon ( desktop5) [dpxxdisp.c 12204]
DpStartStopMsg: send start message (myname is >desktop5_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7010, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1048]
DpMsgAdmin: Set patchno for this platform to 7
Release check o.K.
Sat May 14 18:02:53 2011
my types changed after wp death/restart 0x9f --> 0x9e
my types changed after wp death/restart 0x9e --> 0x9c
my types changed after wp death/restart 0x9c --> 0x98
my types changed after wp death/restart 0x98 --> 0x90
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat May 14 18:03:03 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sat May 14 12:33:03 2011
======================== -
Hi I have only files from catalog DATA form my SQL Server 2008. After I installed sql server and replates file in katalog DATA server not starting.
Where I have problem, what I need to do to work? thanks for any help
best regardsThis Is my Error log
2014-01-02 12:28:05.84 Server Microsoft SQL Server 2008 (RTM) - 10.0.1600.22 (X64)
Jul 9 2008 14:17:44
Copyright (c) 1988-2008 Microsoft Corporation
Express Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: )
2014-01-02 12:28:05.84 Server (c) 2005 Microsoft Corporation.
2014-01-02 12:28:05.84 Server All rights reserved.
2014-01-02 12:28:05.84 Server Server process ID is 6840.
2014-01-02 12:28:05.84 Server System Manufacturer: 'Hewlett-Packard', System Model: 'HP ENVY Sleekbook 4 PC'.
2014-01-02 12:28:05.84 Server Authentication mode is WINDOWS-ONLY.
2014-01-02 12:28:05.84 Server Logging SQL Server messages in file 'F:\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG'.
2014-01-02 12:28:05.84 Server This instance of SQL Server last reported using a process ID of 6948 at 2014-01-02 12:22:16 (local) 2014-01-02 11:22:16 (UTC). This is an informational message only; no user action is required.
2014-01-02 12:28:05.84 Server Registry startup parameters:
-d F:\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\master.mdf
-e F:\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG
-l F:\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\mastlog.ldf
2014-01-02 12:28:05.92 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-01-02 12:28:05.92 Server Detected 4 CPUs. This is an informational message; no user action is required.
2014-01-02 12:28:05.97 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-01-02 12:28:11.12 Server Node configuration: node 0: CPU mask: 0x000000000000000f Active CPU mask: 0x000000000000000f. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required.
2014-01-02 12:28:11.17 spid7s Starting up database 'master'.
2014-01-02 12:28:11.36 spid7s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'SQLEXPRESS'.
2014-01-02 12:28:11.37 spid7s SQL Trace ID 1 was started by login "sa".
2014-01-02 12:28:11.37 spid7s Starting up database 'mssqlsystemresource'.
2014-01-02 12:28:11.39 spid7s The resource database build version is 10.00.1600. This is an informational message only. No user action is required.
2014-01-02 12:28:11.50 spid7s Error: 15466, Severity: 16, State: 1.
2014-01-02 12:28:11.50 spid7s An error occurred during decryption.
2014-01-02 12:28:11.53 spid10s Starting up database 'model'.
2014-01-02 12:28:11.55 spid7s Server name is 'MACIEK\SQLEXPRESS'. This is an informational message only. No user action is required.
2014-01-02 12:28:11.55 spid7s Informational: No full-text supported languages found.
2014-01-02 12:28:11.55 spid7s Starting up database 'msdb'.
2014-01-02 12:28:11.56 spid10s Error: 17204, Severity: 16, State: 1.
2014-01-02 12:28:11.56 spid10s FCB::Open failed: Could not open file E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\model.mdf for file number 1. OS error: 3(System nie może odnaleźć określonej ścieżki.).
2014-01-02 12:28:11.56 spid10s Error: 5120, Severity: 16, State: 101.
2014-01-02 12:28:11.56 spid10s Unable to open the physical file "E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\model.mdf". Operating system error 3: "3(System nie może odnaleźć określonej ścieżki.)".
2014-01-02 12:28:11.56 spid7s Error: 17204, Severity: 16, State: 1.
2014-01-02 12:28:11.56 spid7s FCB::Open failed: Could not open file E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\MSDBData.mdf for file number 1. OS error: 3(System nie może odnaleźć określonej ścieżki.).
2014-01-02 12:28:11.56 spid7s Error: 5120, Severity: 16, State: 101.
2014-01-02 12:28:11.56 spid7s Unable to open the physical file "E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\MSDBData.mdf". Operating system error 3: "3(System nie może odnaleźć określonej ścieżki.)".
2014-01-02 12:28:11.58 spid10s Error: 17207, Severity: 16, State: 1.
2014-01-02 12:28:11.58 spid10s FileMgr::StartLogFiles: Operating system error 2(Nie można odnaleźć określonego pliku.) occurred while creating or opening file 'E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\modellog.ldf'. Diagnose and correct the operating system error, and retry the operation.
2014-01-02 12:28:11.58 spid10s File activation failure. The physical file name "E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\modellog.ldf" may be incorrect.
2014-01-02 12:28:11.58 spid10s Error: 945, Severity: 14, State: 2.
2014-01-02 12:28:11.58 spid10s Database 'model' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
2014-01-02 12:28:11.58 spid10s Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized.
2014-01-02 12:28:11.58 spid10s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
2014-01-02 12:28:11.58 spid7s Error: 17207, Severity: 16, State: 1.
2014-01-02 12:28:11.58 spid7s FileMgr::StartLogFiles: Operating system error 2(Nie można odnaleźć określonego pliku.) occurred while creating or opening file 'E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\MSDBLog.ldf'. Diagnose and correct the operating system error, and retry the operation.
2014-01-02 12:28:11.58 spid7s File activation failure. The physical file name "E:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\MSDBLog.ldf" may be incorrect.
Any idea? -
The J2EE Server not starting.
Hello,
The J2EE Server not starting. (Not able to communicate with message server)
The following is the description I got from SAP.
" Most likely you did configurations on the instance properties, instead
of the global properties, which is the one where the the configurations
should be done. That is why now you did set local properties
which are now false, for example : ume.ldap.access.server_port=[]
This is the cause why the LDAP connection data cannot be retrieved.
This is why the UME service cannot be started.
This is why the J2ee engine is not comming up. "
Pls help.Hi Karan
1.Go to \usr\sap\SID\JCXX\j2ee\configtool and start the config tool.
2.No go to instance -
>server----->services--->com.sap.security.core.ume.services node.
3.Look for ume.ldap.access.server_port=[]
4.See if you have changed the value for the above parameter.If yes change the value to default and restart the engine.It will work
If at all you want to change any configurations you should do it following the below steps:
1.Go to \usr\sap\SID\JCXX\j2ee\configtool and start the config tool
2.Go to Global Server Configurations-->Services--
>
Please award points: -
IDES 4.7, MMC - disp+work running but message server not reachable
Hi,
I loaded IDES 4.7 in Windows 2003 server with Oracle 9i. While starting MMC, the disp+work running but message server not reached causing the issue.
Please suggest,
Thanks,
PrasadHi,
Please find the logs from the file Dev_disp
rdisp/http_min_wait_dia_wp : 1 -> 1
Fri Jul 13 14:14:52 2007
***LOG Q0I=> NiPConnect2: SiPeekPendConn (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 8588]
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c 633]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1545]
Fri Jul 13 14:14:54 2007
CCMS: start to initalize 3.X shared alert area (first segment).
Fri Jul 13 14:15:31 2007
ERROR => MsISnd2: not_attached [msxxi.c 1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 4049]
ERROR => MsISnd2: not_attached [msxxi.c 1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 4130]
Fri Jul 13 14:15:33 2007
***LOG Q0I=> NiPConnect2: SiPeekPendConn (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 8588]
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c 633]
Fri Jul 13 14:15:36 2007
ERROR => MsISnd2: not_attached [msxxi.c 1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 4049]
Fri Jul 13 14:15:38 2007
ERROR => MsISnd2: not_attached [msxxi.c 1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 4049]
Fri Jul 13 14:15:42 2007
ERROR => MsISnd2: not_attached [msxxi.c 1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 4049]
ERROR => MsISnd2: not_attached [msxxi.c 1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 4049]
ERROR => MsISnd2: not_attached [msxxi.c 1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 4130]
ERROR => MsISnd2: not_attached [msxxi.c 1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndAdmin () [dpxxdisp.c 4130]
Fri Jul 13 14:15:43 2007
ERROR => MsISnd2: not_attached [msxxi.c 1296]
***LOG Q0N=> DpRqNoWpHandle, MsSndName () [dpxxdisp.c 4049]
Fri Jul 13 14:15:53 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c 633]
Fri Jul 13 14:16:13 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c 633]
Fri Jul 13 14:16:33 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c 633]
Fri Jul 13 14:16:54 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c 633]
Fri Jul 13 14:17:14 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c 633]
Fri Jul 13 14:17:35 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c 633]
Fri Jul 13 14:17:56 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c 633]
Fri Jul 13 14:18:16 2007
ERROR => MsIAttachEx: NiBufConnect to plvprasad/sapmsDEV failed (rc=NIECONN_REFUSED) [msxxi.c 633] -
Application server not starting on win 2000
when i try to start the application server, the prompt dos prints the following message:
Could not start the instance: domain1:admin-server
server failed to start: abnormal subprocess termination
Could not start the instance: domain1:server1
server failed to start: abnormal subprocess termination
Could not start one or more instances in the domain : domain1
Could not start one or more domains
Premere un tasto per continuare . . .This is roughly what the log file says... is my EE environment not properly set up???
[24/Feb/2003:10:16:01] INFO ( 2628): CORE1116: Sun ONE Application Server 7.0
[24/Feb/2003:10:16:04] INFO ( 2628): CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.4.0_02] from [Sun Microsystems Inc.]
[24/Feb/2003:10:16:44] INFO ( 2628): JMS5035: Timed out after 30000 milliseconds while trying to verify if the JMS service startup succeeded.
[24/Feb/2003:10:16:44] INFO ( 2628): JMS5036: More details may be available in the log file for the JMS service broker instance domain1_server1. Please refer to the JMS provider documentation for the exact location of this log file.
[24/Feb/2003:10:16:44] SEVERE ( 2628): JMS5024: JMS service startup failed.
[24/Feb/2003:10:16:44] SEVERE ( 2628): CORE5071: An error occured during initialization
com.sun.appserv.server.ServerLifecycleException: [C4003]: Error occurred on connection creation. - caught java.net.ConnectException
at com.iplanet.ias.jms.JmsProviderLifecycle.onInitialization(JmsProviderLifecycle.java:247)
at com.iplanet.ias.server.ApplicationServer.onInitialization(ApplicationServer.java:206)
at com.iplanet.ias.server.J2EERunner.confPreInit(J2EERunner.java:114)
Caused by: com.sun.appserv.server.ServerLifecycleException: [C4003]: Error occurred on connection creation. - caught java.net.ConnectException
at com.iplanet.ias.jms.JmsProviderLifecycle.onInitialization(JmsProviderLifecycle.java:231)
... 2 more
Caused by: javax.jms.JMSException: [C4003]: Error occurred on connection creation. - caught java.net.ConnectException
at com.sun.messaging.jmq.jmsclient.ExceptionHandler.getJMSException(ExceptionHandler.java:183)
at com.sun.messaging.jmq.jmsclient.ExceptionHandler.handleException(ExceptionHandler.java:136)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.readBrokerPorts(PortMapperClient.java:145)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.init(PortMapperClient.java:86)
at com.sun.messaging.jmq.jmsclient.PortMapperClient.<init>(PortMapperClient.java:47)
at com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPConnectionHandler.<init>(TCPConnectionHandler.java:46)
at com.sun.messaging.jmq.jmsclient.protocol.tcp.TCPStreamHandler.openConnection(TCPStreamHandler.java:101)
at com.sun.messaging.jmq.jmsclient.ProtocolHandler.init(ProtocolHandler.java:501)
at com.sun.messaging.jmq.jmsclient.ProtocolHandler.<init>(ProtocolHandler.java:930)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.openConnection(ConnectionImpl.java:1482)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.init(ConnectionImpl.java:403)
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.<init>(ConnectionImpl.java:234)
at com.sun.messaging.jmq.jmsclient.UnifiedConnectionImpl.<init>(UnifiedConnectionImpl.java:33)
at com.sun.messaging.jmq.jmsclient.QueueConnectionImpl.<init>(QueueConnectionImpl.java:32)
at com.sun.messaging.ConnectionFactory.createQueueConnection(ConnectionFactory.java:72)
at com.sun.messaging.jmq.admin.jmsspi.JMSAdminImpl.pingProvider(JMSAdminImpl.java:733)
at com.iplanet.ias.jms.JmsProviderLifecycle.waitForJmsProvider(JmsProviderLifecycle.java:284)
at com.iplanet.ias.jms.JmsProviderLifecycle.onInitialization(JmsProviderLifecycle.java:224)
... 2 more
[24/Feb/2003:10:16:44] SEVERE ( 2628): CORE3186: Failed to set configuration -
WebLogic admin server not starting.
Hi all,
I have a problem with my WebLogic Admin server not starting. Following a VM reboot last week our admin servers are no longer starting. On this particular server we have 3 admin servers serving 3 separate environments.
Theserver seems to be getting stuck right at the very start. I have tried removing tmp, cache and ldap directories. Searched for and removed all .lok files. I have manually turned on full debug to try and flush some extra information through standard out but no luck. It is very peculiar. When we have exported the domain to another box and started the admin server it has come up successfully.
This is the output from the logs - this is literally as far as it get before it hangs and does nothing. As far as I know the next thing WebLogic is doing is checking the version. Has anyone any ideas what the problem could be? It is server wide as all 3 admin servers on the same box are suffering the same problem.
This is Weblogic 10.3.2 on a Solaris vm
JAVA Memory arguments: -Xms256m -Xmx512m
WLS Start Mode=Development
CLASSPATH=/apps/Oracle/Middleware64/patch_wls1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/lib/tools.jar:/apps/Oracle/Middleware64/utils/config/10.3/config-launch.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic_sp.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic.jar:/apps/Oracle/Middleware64/modules/features/weblogic.server.modules_10.3.2.0.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/webservices.jar:/apps/Oracle/Middleware64/modules/org.apache.ant_1.7.0/lib/ant-all.jar:/apps/Oracle/Middleware64/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar:/apps/Oracle/Middleware64/wlserver_10.3/common/eval/pointbase/lib/pbclient57.jar:/apps/Oracle/Middleware64/wlserver_10.3/server/lib/xqrl.jar
PATH=/apps/Oracle/Middleware64/wlserver_10.3/server/bin:/apps/Oracle/Middleware64/modules/org.apache.ant_1.7.0/bin:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/jre/bin:/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/bin:/usr/bin:/usr/sfw/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
Starting WLS with line:
/apps/Oracle/jrt/jrmc-4.0.1-1.6.0/bin/java -jrockit -Xms256m -Xmx512m -Dweblogic.Name=AdminServer -Djava.security.policy=/apps/Oracle/Middleware64/wlserver_10.3/server/lib/weblogic.policy -Xverify:none -da -Dplatform.home=/apps/Oracle/Middleware64/wlserver_10.3 -Dwls.home=/apps/Oracle/Middleware64/wlserver_10.3/server -Dweblogic.home=/apps/Oracle/Middleware64/wlserver_10.3/server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/apps/Oracle/Middleware64/patch_wls1032/profiles/default/sysext_manifest_classpath weblogic.Server
<09-Jan-2013 18:32:06 o'clock GMT> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.1-21-133393-1.6.0_20-20100512-2127-solaris-sparcv9 from Oracle Corporation>Just a wild guess (as you have restarted the physical servers), it could be related to the entropy of the machine.
What you can try to do is edit the java.security file in the $JAVA_HOME/jre/lib/security directory.
Find the entry securerandom.source and edit the value to file:/dev/./urandom (instead of file:/dev/urandom) -
I installed Crystal Reports server 2008, i'm geting server not started erro
Hi,
I'm getting error with server not started or not available error (FWM 01003). If i check in CCM, i don't see any entry for CMS server entry. How to start CMS server??? Please advise me. i installed trail version of crystal reports server 2008.
thanks in advance!!!
Ben.I am a consultant for Business Object products and experienced the same exact problem. We were installing Business Objects Edge, which is similar to Crystal Reports Server 2008, with MS SQL Server 2000 SP4 for the CMS System Database on a server that was named <Numbers>-<Letters>.
We discovered that some scripts that the installation and CMS run fail when the Server Name of the Business Objects Edge Server start with a number. When the CMS System Database is setup, a table called CMS_IdNumbers6 is created. It should have three columns, NameId, IdName and third column that is named after the server where you are installing Crystal Reports Server 2008, Business Objects Edge or Business Objects Enterprise. This column is called <ServerName>_iad_intensive_int_6400.
This column fails to get created when your server name starts with a number and subsequent scripts that insert records into this column fail. Renaming the server where we were installing Business Objects Edge to <Letters><Numbers> (no dashes either to be safe) solved the problem. We were successfully able to install Business Objects Edge. Please note: This is the server where you are installing Crystal Reports Server 2008 that needs to be renamed and NOT the MS SQL Server--just making a note because we had to go back and forth with our server team a couple of times on this point. -
Can't open any of the National Parks Service Civil War Soldiers and Sailors Systems sites. Get the message Server not found although others are able to open it easily. Network connection is good and addresses are good.
== URL of affected sites ==
http://www.civilwar.nps.gov and all National Parks Service Civil War Soldiers and Sailors SystemSuch behavior can be an indication that you are infected.<br />
In such a case you can use another computer to download the program and save the file to an USB stick.<br />
Be sure to download the latest databases.
You can try an online anti-virus scanner.
* http://www.google.com/search?q=Online%20Antivirus%20Scanner
* http://housecall.trendmicro.com/ HouseCall - Free Online Virus Scan - Trend Micro USA
* http://vms.drweb.com/online/?lng=en Dr.Web - innovation IT-security solutions. Complex protection against Internet threats.
* http://www.eset.com/onlinescan/ - Free ESET Online Antivirus Scanner
Maybe you are looking for
-
When closing an app, focus doesn't return to previously open app
Just as the subject line says. Is there a way to make OS X Leopard revert to the previously open window after closing an app? Perfect example: I open a pdf file from a website, and Preview opens to display the file. I close Preview when done but Fire
-
HP LaserJet Pro CM1415 Color Multifunction Printer series
I can not make my printer print darker when printing from the desktop. Any suggestions? All of the cartridges are new and I have already calibrated. Thanks!!
-
Receiving a pdf file from R3 in WebDynPro
Hello Experts, I have a requirement like I need to have a button to download PDF. The PDF has to come from SAP R/3 . Now i cant use Adobe Interactive form as the PDF layout will change from time to time. I will need to call an RFC and the RFC has to
-
Installed iTunes on my Windows 7 computer and all my icons on my desktop changed. The filetypes now seem to be all iTunes, even Excel files. When I uninstall itunes it goes back to the way it was.
-
Sending Error mail for Interface level Failure
Dear SDN, I have a requirement where i cannot use alerts or ccms. My scenario is to devlop a monitoring solution where if any messages fails due to whatever reason i need to send 2 emails to the sapxi admin and to the business informing the e