Message Tracking with Read Status

I am trying to determine if every mailbox user has *READ* a certain email. In this particular use-case it is the company newsletter being sent from MailChimp.
I have tried getting the results of Get-MessageTrackingLog to display the status, e.g. whether it is READ or not. I am able to get the information I need one recipient at a time using the Delivery Reports in OWA but that is very labor intensive.
Since Exchange knows the status of the message and the physical location of the message via Delivery Reports, how/what can I do to include those elements in the output of my Shell command(s)?!

Hi,
Based on my research, delivery report is the best way to check whether an email has been read or not. And I haven’t found other ways. For delivery report, we can depend on the following steps.
1. Make sure that the property ReadTrackingEnabled has been configured to True:
Set-OrganizationConfig –ReadTrackingEnabled:$True
2. Using Outlook 2010, go to Send Items, select your sent message, click File in the toolbar, and there you can select Open Delivery Report underneath Info.
http://blogs.technet.com/b/ilvancri/archive/2010/04/13/question-is-it-possible-to-check-if-a-message-has-been-read-even-when-the-sender-forgot-to-check-the-box-request-a-read-receipt-for-this-message.aspx
http://blogs.technet.com/b/exchange/archive/2009/06/08/3407648.aspx
Thanks,
Angela Shi
TechNet Community Support

Similar Messages

HT204406 How can i get tracks with "waiting" status to upload to itunes match.

I have completely cleared my library and started again. i have 24000 tracks in library but only 15000 + are uploading. leaving a further 6000 or so with a "waiting" status. i have tried the update itunes match option which runs through the full process and on completion is still leaving the tracks with "waiting" status.
any ideas??

I have the same issue, although I only have about 2500 tracks and half of them are in waiting. I read a few other peoples issues with this problem and checked and found that all the songs (or whatever it is) are not in the folder they were in, in fact they are not on my computer anymore! They are still in the cloud i guess, well the information is, but the songs arent. So now I have to go back and re-import all the CD's that are missing. I did reinstall itunes before this happened which probably had something to do with it, but whenever I tried to update itunes match it would freeze my computer and give me an error. So I reinstalled and now it works but half my music is gone! and alot of it was not on CD, I had gotten online, but when I go to check purchases/downloads available, it says everything that can be has been. It ***** because it takes so long and I know I have lost some of the songs since I got them online and dont have a hard copy. But basically you need to check to make sure the files are in the folder that itunes is looking in, and that they are ON your computer or server. Then re-import if you have to, and update itunes match (if your using) then icloud should recognize. Ill let you know if this works for me since I am in the process of doing just that.

MTA Message Tracking - status PENDING

Hi All
Any idea why MTA Message Tracking will say Status PENDING for all messages, but when you look from the client, it says Delivered/Opened etc.?
This is happening on all messages to all post offices etc.
Thanks
Emily

emilym,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Message tracking fails with 'The server software doesn't support the type of search requested' for only a SINGLE user in org

Ok this is a weird one. Message tracking works fine for all my users except for one where I get the above message. I've tried stopping/restarting the transport services and renaming the tracking log but no luck. Any ideas?

Updated and resolved for my situation:
I called MS Premier and this is now resolved for my issue with a workaround. The technician is going to submit a bug fix but basically he found another bug ticket from summer 2009 that stated "if the mailbox has more than 49 proxy addresses entered within
the Email addresses tab the search command will fail".
We re-tested a few failed search mailboxes by removing unnecessary proxy addresses from that tab the searches worked fine.
Hope this helps others.
Mike
This resolved the issue I was having as well - the recipient I was trying to track for had a ton of extra smtp addresses that were not needed. Removing them fixed the issue.

Mail does not correctly reflect read status of Gmail IMAP messages

Apple Mail is no longer correctly reflecting the read status of emails that have been read on other devices/computers when viewing my Gmail IMAP inbox. Whereas my iPhone and Gmail account both show changes in items' read status immediately or on next mail retrieval, in Apple Mail the only way I have currently of updating the read status is to quit Mail and restart it. Neither automatic fetching of Mail, nor clicking "Get Mail", nor right-clicking the Inbox and choosing "Synchronize Gmail" work.
My other IMAP account (MobileMe) does not exhibit this behaviour, but Mail.app does this with Gmail on both of my desktop computers.
Anyone out there with a similar problem? And are there any possible solutions, or is it a bug/incompatibility with GMail?

This problem is still occurring for me in 10.5.5 - I even tested it by creating a new gmail account with only 1 message in it, in case it was a problem with large mailboxes, and the same thing happened.
Mail messages marked read elsewhere are not updated in Mail on the next send/receive. I wonder if everyone with this problem could report the bug at http://www.apple.com/support/feedback and see if we can get this solved in 10.5.6

Is there throttling going on here? Constantly queued emails on Hybrid Exch 2013 server with error RecipientThreadLimitExceeded in message tracking logs...

Please let me know if anyone knows an answer to this one... We're in a Hybrid Exchange environment, with 2 x Exchange 2007 servers, and 1 x Exchange 2013 Hybrid server which is pointing to Office 365 for the purposes of relaying mail to O365 while we
migrate our users out there.
We have just finished migrating, but just a couple of days ago we started experiencing delays in email delivery to O365... Not all mail, but some! Incoming email or locally generated email gets relayed out through the Hybrid server and out to O365, but
not all email is delayed... only some, but it's constant. During the busiest part of the day, about 200 messages are sitting in the Queue in Exch2013... but they all eventually resolve between 5 and 45minutes. The users are not happy.
The last error in the queue viewer for each hung email reads: 451 4.4.0 Temporary server error. Please try again later.
If I look at the message tracking logs, I find an interesting item -- "RecipientThreadLimitExceeded":
2014-05-15T14:15:51.608Z,192.168.3.11,hydra,207.46.163.215,company-mail-onmicrosoft-com.mail.protection.outlook.com,RecipientThreadLimitExceeded,Outbound
to Office 365,SMTP,DEFER,10307921510617,<[email protected]>,885ea3ce-a020-41b1-8950-08d13e58d6d3,[email protected],451
4.4.0 Temporary server error. Please try again later,10117,1,,,Read: This is your generic subject line,[email protected],[email protected],2014-05-15T14:16:51.608Z,Undefined,,,,S:Microsoft.Exchange.Transport.MailRecipient.RequiredTlsAuthLevel=Opportunistic;S:Microsoft.Exchange.Transport.MailRecipient.EffectiveTlsAuthLevel=EncryptionOnly;S:DeliveryPriority=Normal
I have tried to find some documentation on resolution for this RecipientThreadLimitExceeded error, but I can only come up with some Exchange 2011 documentation which recommends adding some entries to the EdgeTransport.exe.config file to bump up the RecipientThreadLimit
value... I have not found anything pertaining to 2013. I cannot even find any powershell commands to see what the current RecipientThreadLimit is on 2013! Aghg!
Has anyone seen this before, or have any recommendations?
Thank you,
Mike

After many days of frustration, Microsoft Support finally resolved this issue. Believe it or not, but the issue was actually on the Office365 side. Here's the fix:
Exchange Admin Center -> Mail Flow -> Connectors -> Inbound Connectors
Open your "Inbound from <guid>" with the "On-premises" connector type
Click on Scope -> scroll down to "Associated accepted domains"
We had an entry in there "<organization>.mail.onmicrosoft.com"... Microsoft support had us remove this entry so that the box was completely empty.
That RESOLVED it... amazing what what little entry could do. We've had this entry in there for about 2 months, and it had been working fine. Support acknowledged that several customers have had this issue, that they are working on getting it fixed
on the back-end.
Hope this helps somebody...
-Mike

Since changing our computer I have been unable to download ebooks to my Reader Library I get a message Some file types associated with EPUB files are not associated with Reader Library; Waterstones suggest that I may have accidentally created a new Adobe

When I try to download them from the Waterstones website I get a message saying:
‘Some file types associated with EPUB files are not associated with Reader Library. Do you want to associate them now? When I reply yes I get another message; ‘Configuration error unable to update EPUB files check network firewall and try again’.
The ‘books’ are saved in the Download directory and I can’t transfer them from there to my E-Reader. I have not had any problems before, it was very simple; I saved the download and it automatically went into the Reader Library.
I contacted HP and they said it is a software error and suggested I contact Waterstones. I contacted Waterstones Customer Support and got the following response:
As the error message is specifically mentioning the firewall it does sound like something in the firewall settings is stopping the download from taking place correctly. However, the files should not be being saved to the Download folder. It would be worth trying again by going to your Digital Order History on your Waterstones.com account and pressing the download button, and then making sure to press "Open" not "Save". When you press Open rather than Save it should give the option to open the file with Adobe Digital Editions. If the firewall message still comes up then I'm afraid something is blocking it on your end.
If the above "Open" download method works but you then still get an error message it could possibly be that you have accidentally created a new Adobe ID when setting up on the new computer, rather than signing in with your old Adobe ID. It would be worth trying the aforementioned download technique again first, but if problems did still persist it would be worth calling Adobe themselves on 0207 365 0735, as they should be able to sort out any account issue.
In response to the first para of Waterstones email I already do what they suggest I do press ‘Open’ not ‘Save’ but I don’t get the open with Adobe Digital Editions (we have installed Adobe Digital Editions on the new computer. Waterstones say we may have ‘accidentally created a new Adobe ID when setting up the new computer’ does that mean that we shouldn’t have installed Adobe Digital Editions on the new computer as it would have already been there? How do I sign in with my old Adobe ID?

Hi all after attampting to get some supoport from adobe by phone.... nice people infurating policys as far as support for digital editions or DRM is conserned... However I got no where with support.
I ended up instaling Digital editions on my desktop PC and going through the motions of registering and borrowing a book then returning it. Then I trying on my iPad, Bluefire worked, Over drive did not so I completely removed Overdrive and reinstalled and re registered. all working now.
Maybe some one at adobe did something. Maybe the install of the adobe DE client on a PC corrected what ever was out of wack with my account. Mayby the server that my account lives on did a scan disk and corrected a bad clustrer.
What ever happend My account is actiove and working again. hope this helps others.

Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.

Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

I've deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message that 'Adobe Reader is blocked because it is out of date'. Using Windows XP with the latest updates (SP3).

I've deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message that 'Adobe Reader is blocked because it is out of date'. Using Windows XP with the latest updates (SP3).

Screenshots attached to email replies will not make it back to the forum; you need to login to the forum and post it in your topic using the camera icon in the editor.
Google Chrome is a problem:
if you use Chrome's own PDF viewer, the results are unpredictable.
if you use the Adobe Reader plugin with Chrome, it may reject (block) it if it is not the latest version. Reader 11.0.08 is the latest version for Windows XP, but Chrome may insist on the current version 11.0.10.
My suggestion; use a different browser!

Cannot open PDF files with Reader XI message appears Adobe Reader has stopped working

Cannot open PDF files with Reader XI message appears Adobe Reader has stopped working. A problem has caused the program to stop working

Which Operating system you are using?
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)] and then try to open the file.

I cannot update from OS 10.9.4 to 10.9.5. I get a message saying: File couldn't be installed error (513). I have configured my OS so that I have read and write permission followed by system with read and writ permission. Can someone help me? Thanks.

I cannot update from OS X 10.9.4 t0 10.9.5> Whenever I try I get the following message: File couldn't be installed error (513) and something about not having the proper permission. Under the Macintosh HD sharing and permissions settings I have customized the settings so that (Me) has read and write permission followed by the system with read and write permission, wheel and everyone have Read permissions.
I have no problems updating apps such as Adobe CC or iTunes but cannot update the operating system, can someone help me? Thanks.

1. Restart the computer in safe mode. Certain caches maintained by the system will be rebuilt.
Safe mode is much slower to start up than normal. The next normal startup may also be somewhat slow.
When the login screen appears, restart as usual (not in safe mode) and test. There's no need to log in while in safe mode.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, go to Step 2.
If there's no change after taking this step, continue.
2. Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
/var/folders
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "folders" selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Messages stucked in moni with queue status as "RUNNING"

Hi All,
Few of messages stucked in moni with queue status as "RUNNING" from the past 6 to 7 hours. all the stucked messages running on same dialog instance app server 03 (ucobpi03_PIP_03). i checked PIP appserver its working fine.
Can any one please expalin me how to clean the queues..is there any effect of other queues ?
Thanks,
Siva.

Hi,
it can be due to multiple reasons....
check the interface logic built ...it can be either due to this or can be of large volume of data...
Also check the queues have been registered or not...
HTH
Rajesh

EO Messages with Delivering Status in Adapter Engine

Hi All,
We have a scenario DB-DB Asy with Java Proxies. Proxies are there to accept the messages from Sender DB and insert in target DB. Get the response from target DB and insert back that to Sender DB.
Actually the scenario is Syn, but we made it as Asynchronous by implementing Java Proxies.
Now we are using EO mode in Sender JDBC channel. We have 17 interfaces in the similar pattern. We are using one common XI receiver channel for all these 17 interfaces.
If one message got struck, then rest other Proxies are not getting triggered and not able to resend the message ( ofcourse I know I cannot resend with Delivering Status). But not sure what causes the messages to failed with Delivering Status mode.
Any pointers would be highly appreciated.
Will increase of Parallel Queues really solve my problem? If it fails in Prod, its a big problem for us as we dont want to lose the data. Now everytime we are restarting the Message service server.
Regards,
Srinivas

Normally if there is any problem in target then you will see the adapter engine message as delivering
after the no of retires set then status will go to system error
during this entry check the CC used what is the error causing for that ?
HTH
Rajesh

Message Monitoring with status delivering

Hello,
I have an scenario R/3 (Proxy) -> XI -> File.
Alls is successful in sxmb_moni, and there is nothing in SMQ1 and SMQ2, but in message monitoring ( adapter engine ) the message appears in status delivering.
The quality of service is exactly once. I checked the adapter and is in green status and the in the log the last message is Success The message status set to DLNG.
I've been searching for old messages, but for the same interface all the messages are with status delivering.
I can't cancel or resend the messages. Then I do the update but after that when I try to resend I obtain the same message "Update the status".
The adapter is an FTP connection with Connect Mode "Permanently".
Do you know what could be the problem and how to solve it? All the messages we send are in delivering status.
Many thanks in advance.
Regards,
Xavier.

Hi Xavier Carbonell ,
i also faced same problem. In my case some other Communication channels were in error state so all messages are struct in Messaging System, all my messages status went "To be Delivering". Please check all ur Communication channels are in green.
For futher information check the below link.
Flat file with two separators
If it is still not solved then restart J2EE engine.
Thanks,
Venkatesh
Edited by: venkatesh bs on Apr 14, 2008 12:09 PM

Monitoring EOIO Messages stuck in AE with HOLD status?

Hi Gurus,
Scenario: IDOC -- > XI (Message split) - - > (HTTP/File)
Some times messages to File adapter are stuck in Adapter Engine with status "HOLD". Found the root cause and un-checked "Maintain order at runtime" in interface determination.
How to get alert if the EOIO messages are stuck in AE with status "HOLD"?
Please help.

Hi,
HOLD status
This is an EOIO message whose predecessor was not processed successfully yet. The status is retained until all predecessors are delivered successfully. If a predecessor has the "System error" status and is restarted, all successors are also restarted provided that the delivery of the predecessor is successful.
If a predecessor has the "canceled with errors" status, further processing is not possible in systems before Support Package 11 for the adapter framework and Support Package 10 for the adapter framework core patch 02. In higher version systems, the status of predecessors can only be set to "canceled with errors" in a manual way. Successors that have the "Holding" status can be restarted after you have set the "canceled with errors" status (see related note 811864).
Regards,
Sreenivas

Message Tracking with Read Status

Similar Messages

Maybe you are looking for