Message Monitoring with status delivering

Hello,
I have an scenario R/3 (Proxy) -> XI -> File.
Alls is successful in sxmb_moni, and there is nothing in SMQ1 and SMQ2, but in message monitoring ( adapter engine ) the message appears in status delivering.
The quality of service is exactly once. I checked the adapter and is in green status and the in the log the last message is Success The message status set to DLNG.
I've been searching for old messages, but for the same interface all the messages are with status delivering.
I can't cancel or resend the messages. Then I do the update but after that when I try to resend I obtain the same message "Update the status".
The adapter is an FTP connection with Connect Mode "Permanently".
Do you know what could be the problem and how to solve it? All the messages we send are in delivering status.
Many thanks in advance.
Regards,
Xavier.

Hi Xavier Carbonell ,
i also faced same problem. In my case some other Communication channels were in error state so all messages are struct in Messaging System, all my messages status went "To be Delivering". Please check all ur Communication channels are in green.
For futher information check the below link.
Flat file with two separators
If it is still not solved then restart J2EE engine.
Thanks,
Venkatesh
Edited by: venkatesh bs on Apr 14, 2008 12:09 PM

Similar Messages

Message stuck in Adapter Engine queue with status "Delivering"

Hi All,
I have a File to File EOIO scenario. The messages are sucessfully delivered from IE to AE. All entries have a chequered flag in SXMB_MONI. No messages are stuck in IE queue (SMQ2). But the message is stuck in AE queue with status "Delivering". I can not resend or cancel the message coz the status is "delivering".
The reason it is in "delivering" status is due to some config error that I made in Communication Channel FTP parameters. Now it is corrected. But how do I deal with this message now?
Restart of server is not an option here. Is there are place I can delete the message from AE queue?
Thanks
Jaishankar

You can see the queues status (and number of stuck entries etc) through the link:
http://<host>:<port>/MessagingSystem/monitor/systemStatus.jsp
There, you can maintain the queues.
There is also a link for the EOIO Sequence Monitor:
http://<host>:<port>/MessagingSystem/monitor/sequenceMonitor.jsp
There you can see the stuck messages and maintain these.
Make sure to handle the proper message IDs.
All of these are acessible through the Messaging System main page:
http://<host>:<port>/MessagingSystem/
Regards,
Henrique.

Messages stuck with status "WAITING"

Hi Everyone,
We have implemented PI interface a year ago with JDBC sender (ORACLE) and RFC receiver (SAP) to transfer the goods movements from legacy to SAP and give back the current stock after the goods movement is posted back to ORACLE system.
The interface has been working fine for over an year now but suddenly since 15days we are experiencing the issue of delays in message transmission where-in in SXMB_MONI we see a time difference of 60-90mins between start message start time and end time...
Nothing has been changed from development/design perspective and am unable to understand the reasons for this delay.
Also for the above scenario the message status in MESSAGE MONITORING shows waiting status and i have cross verified for any errors and could not find any errors in given time.
also MDT Screen shot for your reference
I am struggling to figure out the reasons and this is causing stock mismatch between Oracle system and SAP and has become show stopper.
Please guide me in identifying the root cause and fixing this...
Thanking you all in anticipation of help...
Lakshmi

hi Claudia,
I have cross verified both and as you can see there are no errors
a
and finally the XML
couldn't figure out why this delay happening... One thing after an hour or so... the things get cleared as one in executing state finishes leading to others to finish.. but by then they are getting accumulated
Appreciate any guidance to figure out the root cause...
Thanks in advance
lakshmi

PO Report with Status Delivered Complete

Hi
Somebody Knows how can i get a Report for
PO with The indicator Delivered Complete.
Thanks

Dear Aide Tellez,
You can try the following transactions:
ME2L
ME2M
In selection screen choose proper value for 'Selection parameters'.
Regards,
Naveen.

Error in Seeburger Message Monitoring

Hi ,
I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file.
I m getting error in seeburger message monitoring with status as "Could not send ansynchrone MDN to partner - url not set!". can anybody tell me whats the reason behind it,where it went wrong.

Really didn't understand your scenario. That sentence makes no sense:
"I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file."
But what I understand from the error message you have provided...................
if you are using Seeburger AS2 adapter as Receiver Comm Channel..........then there is definitely some cofig error is settings for MDN acknowledgement.
Under Parameters Tab:
You must have set the following parameter
MDN Mode = "ASYNC"
And has not provided the following parameter just below it :
Receipt Delivery Address
This parameter should have value: the URL of your own AS2
server where the asynchronous MDNs are
to be delivered.
Hope this solves your problem.
Regards,
Suddha

JBBD Sender - Problem with Adapter Engine - Message status Delivering -

Hi all,
I've a rare problem. My scenario is JDBC (EO) to IDOC. If the SELECT query from SQL database arrows 8000 lines, the message was sent from PI to R/3 succesfully and Idocs was generated.
But if the query is larger than 10.000 lines, the message was stopped in the sender queue in AE with status "Delivering". In SXMB_MONI I can't see the message, only in RW in Message Monitoring or Component Monitoring in Engine Status.
I've applied note Note 937159 - XI Adapter Engine is stuck, and follow this blog
/people/kenny.scott/blog/2007/08/20/messaging-system-queue-properties-after-xi-30-sp19-xi-70sp11
Using Configtool I modified these parameters (MaxConsumers). But message still puts in sender queue.
I have in PI 7.1 SPs 0004.
Any suggestions??
Edited by: Pablete on Sep 13, 2010 8:41 PM

I have the same requirement and for solving this, I have to apply a very complex select statement.
But it works perfekt for MS SQL:
select * from table where order_no in (SELECT distinct top(1000) order_no FROM table where any_clause) and any_clause order by order_no
update table where invoice_no in (SELECT distinct top(1000) invoice_no FROM table where any_clause) and any_clause
I create an IDoc for each order_no, so I have to make sure, that all lines belonging to one invoice are in the same select.
My select statement has 463 characters

Message got struck in hold status in message monitoring.

Hi SDNers,
             I am doing Idoc to File scenario. I triggered an Idoc and it is successfully processed in XI and got struck in message monitoring with hold status.
             After repetetive attempts of restarting the message, still it is in hold status.
             Even if I tried to cancel the message, it is not cancelling as it is in hold status.
            Can anybody please help how to process the message or can anybody explain how to cancel the message from message monitoring, which is in hold status.
Regards,
Jayaram.G

Hi,
If the message that has not yet been delivered is not in error state, the problem cause is probably that the message is blocked in the QRFC queues of the Integration Engine.
Check queue status
Call the Integration Server and call transaction SMQR in the sender and receiver Integration Engine in the corresponding system client.
Check the status of the scheduler and the status of the XBQ* and XBT* queues:
u25CF     Inbound qQueues
XBTI* (ExactlyOnce)
XBQI* (ExactlyOnceInOrder)
u25CF     Outbound queues
XBTO* (ExactlyOnce)
XBQO* (ExactlyOnceInOrder)
u25CF     Acknowledgment queues
XBTB* (ExactlyOnce)
XBQB* (ExactlyOnceInOrder)
u25CF     Large message queue
XBTL* (ExactlyOnce)
If the scheduler has the status Waiting, it is waiting for free work processes. This is why delays occur when XML messages are processed.
If not all necessary queues are registered, you can search for queues with the name prefix above using transaction SMQ2. Use transaction SXMB_ADM to register the queues in this case.

Urgent - Messages in "To Be delivered" status

Hi XI ers,
We have around 150 messages in "To Be delivered" status. Tried resending a couple of them but no sucess.
When tried to resend a message, it gives message 2 Audit log entries in MDT (Message Display Tool). The first entry is "Try to fail the message" and "Trying to resend the message"
After that in RWB, message monitoring, the status of the message is "To Be delivered" forever.
>>there are no queue entries (smq1 and smq2)
>> tried cancelling the first message in the list of "To Be delivered" status.. and that did not work.
The error being in Receiver end, there are no error entries in sxmb_moni also.
Can any help me with what the issue could.
Any suggestions on directing me are welcome,
thanks,

hey
have a look at the followin
Status: TO_BE_DELIVERED
Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
Solution:
This is done via the Messaging System receive servlet:
http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>
/<PROTOCOL>
Only if this was executed successfully the Messaging System returns HTTP 200 to the Integration Server and the Status TO_BE_DELIVERED moves to DELIVERING
Try logging into Sap GUI with two users: XIAPPLUSER & XIAFUSER
to see if they are blocked
We can check the messages:
AdapterFramework
com.sap.aii.adapterframework.serviceuser.language
com.sap.aii.adapterframework.serviceuser.name = XIAFUSER
com.sap.aii.adapterframework.serviceuser.pwd
ApplicationSystem
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name = XIAPPLUSER
com.sap.aii.applicationsystem.serviceuser.pwd
in the exchange profile to make sure the right passwords
thanx
ahmad

Message Status "Delivering" and "To Be Delivered" (Urgent)

Hi Experts,
In XI QAS i am testing IDoc to File secnario with QOS EOIO, first message is in status "Delivering" and all subsequent messages are in status "To Be Delivered". Messages are went to this status because i exported CC from XI DEV to XI QAS. In XIDEV in CC i used NFS protocol. But in XIQAS I am using FTP protocol. After import of CC into XIQAS, XIQAS CC started using NFS protocol . So first message went to DELIVERING status and all subsequent messages are went "To Be Delivered" status. I find out this error and rectified that. In message monitoring i tried to cancel the message whose status is DELIVERING.
When i click on cancel button it say it is unable to cancel the message. Then i restarted both XIQAS server. The issue is resolved. But my question is suppose if this is case in Production server then we cant restart the Production server. How to tackel this. I had gone through all other threads. All thread says the following solution:
-Restart Server (Both Java engine and ABAP engine).
-Queue hang-up: check out SMQ2 for the message queue status
-try to restart the messages from the RWB-->Message Monitoring
In my case it is not possible to resend or cancel the message with status "Delivering" and "To Be Delivered". I want know hw to tackle this error in Production server.
Thanks,
Venkatesh

Hi,
Status: TO_BE_DELIVERED
Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
Solution:
This is done via the Messaging System receive servlet:
http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>
/<PROTOCOL>
Only if this was executed successfully the Messaging System returns HTTP 200 to the Integration Server and the Status TO_BE_DELIVERED moves to DELIVERING
1. Try logging into Sap GUI with two users: XIAPPLUSER & XIAFUSER
to see if they are blocked
2. We can check the messages:
AdapterFramework
com.sap.aii.adapterframework.serviceuser.language
com.sap.aii.adapterframework.serviceuser.name = XIAFUSER
com.sap.aii.adapterframework.serviceuser.pwd
ApplicationSystem
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name = XIAPPLUSER
com.sap.aii.applicationsystem.serviceuser.pwd
in the exchange profile to make sure the right passwords
Regards
Agasthuri Doss

Message in status delivering

Hi,
We have facing several problems in our SAP PI 7.31 single stack environment. The problem is concerning broken connection with another platform. When network problems occurs the messages change to status "delivering".
These messages are in delivering status and we can not cancel or restart without a Java Server node restart.
   The questions are:
     - Are any possibilities to fix this problem manually?
     - Is it possible to change the status? ( to error for example).
   On the other hand I would to know if it is possible to tuning queues in order to put this messages in another error queue when a deadline or timeout is produced.
   Thanks in advanced
    Iván

Hi Carlos,
Have you checked Javier Alcubilla Alcala's answer in this thread PI 7.31 Java/Single Stack, Mass Cancellation of "To Be Delivered" messages?
You can cancel and resend them.
Regards,

Java Proxy message in waiting status

Hi,
   Let me explain my case, In our Integration Scenario we have configured an Inbound Java Proxy as the How to guide (HOW TO WORK WITH JAVA PROXIES) expain, but the proxy doesn't hava code, that is, it have the code by default when its created, and when we register it and the scenario runs, in the message monitoring the status of the message to the JP Business Service is in WAITING status, and in the details it says sometimes that an old reference to another JNDI name of bean is doesn't locate or the message "MessageSpecifier could not be reset".
   Remember, the Imp. class has only the default code and the scenario is JDBC --> XI --> JavaProxy
   Any ideas?

Hi Hector,
Status: WAITING
          The message had been sent and it is failed and is currently waiting for another attempt.
Solution :
When the fist attempt to deliver the message has failed (a recoverable exception arose), the message is usually rescheduled and the status is updated to WAITING. As long as the message is in this status, the Messaging System retries to deliver the message according to the configured retry settings (default 3 tries).
Regards
Agasthuri Doss

Jdbc adapter error on confirmation message in message monitor (rwb)

I have the scenario iDoc -> PI 7 - > jdbc (AS400 odbc driver).
When I do INSERT statements, the data is stored in the Database and the RWB message monitoring shows status Successfull.
However, for every insert, an other message shows up in the message monitoring with reversed Sender and Receiver (so it looks like a confirmation message is trying to find its way back to XI). This message first is is Status "Waiting", and after some time gets in Status "System Error".
As I am not expecting any responses in my XI configuration (as I have no place to send them to), I want to stop these messages showing up in the Adapter Engine (as there will be many Error Status messages that are of no interest to me).
How can I stop these messages, or what should I do in XI to process them (and dump them in my receiver determination). I have NO BPM involved .

Hi,
For each open connection a entry is made j2ee stack.So when the it reaches to max and execption is thrown.
In Jdbc adapter configuration -> advance mode -> Set -> Disconnect from the database after processing each message.
Should solve the prob
<b>Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*</b>

System error in message monitoring

Hello,
Scenario is proxy to database. Status seems to sytem error in message monitoring. Error detail is In audit log of message details as belows:
JDBC Message processing failed, due to Error processing request in sax parser: Error when executing statement for table/stored proc. 'If_test ' (structure 'STATEMENT'): java.sql.SQLException: ORA-00936: missing expression
I should resent this message content. When i press Resend tab in message monitoring, error status is not being changed.
Thanks in advance

Hi,
Check the payload received is correct or not in this case ...
Take payload and check at mapping level...
if you are using insert or update statement you can enable log at the receiver jdbc channel in advance mode(logSQLStaement to true) to see how the statement is getting framed ...
HTH
Rajesh

Cant see synchronous http-calls in message monitoring

Hi all,
I 've got a synchronous http call. When the request was bad I saw the failed request and response messages in XI message monitoring with red lights. But now the call seems to work fine, because the sequenced step is showing. But I can not see the http-message in message monitoring.
Any ideas?
Regards
Mathias

hi,
have a look at my blog:
/people/michal.krawczyk2/blog/2005/05/10/xi-i-cannot-see-some-of-my-messages-in-the-sxmbmoni
how to turn it on
logging_sync
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Stuck in To Be Delivered Status in Message Monitoring - Adapter Engine

Hi,
I have messages stuck in To Be Delivered status in Messages Monitoring. When i checked the Audito Logs, there are NO LOGS. I resent the message and now the logs indicated in the Audit Logs is:
2014-03-26 08:39:10
Information
The message was successfully received by the messaging system. Protocol: XI URL: http://<host>:<port>/MessagingSystem/receive/AFW/XI Credential (User): PIIXXXX
2014-03-26 08:39:10
Information
Using connection SOAP_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2014-03-26 08:39:10
Information
Message successfully put into the queue.
2014-03-26 08:52:48
Information
Admin action: Trying to redeliver message.
The connection between the receiver is ok, does this have something to do with the Communication Channels?
Please help.
thank you.

Hi Eng Swee,
there are messages that were cancelled yesterday and the status is 'Terminated With Errors'
this is what is indicated in the Audit Logs
2014-03-26 02:38:47
Information
Admin action: Trying to fail message.
2014-03-26 02:38:47
Error
The message status was set to FAIL.
2014-03-26 02:38:47
Information
Admin action: The message was successfully set to status failed.
2014-03-26 02:38:47
Error
Asynchronous error detected: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Message failed by admin.. Trying to report it.
2014-03-26 02:38:47
Error
Asynchronous error reported.
Is this the reason why the messages are stuck?
thank you!

Message Monitoring with status delivering

Similar Messages

Maybe you are looking for