Message Types in an IDOC Type
How I can identify the various message types that are been plugged in an IDOC Type? What will be the Transaction Used to identify that? I used the Transaction WE30, but I see the various segments that are been attached to the IDOC type and Not at the Message Type level. I used the IDOC type ORDERS02.
SAP uses a single IDOC type for several logically related messages. For example, the Orders IDOC type (ORDERS02) is used for several messages, such as Order (ORDERS), Order Response (ORDRSP), and Order Change (ORDCHG).
Create Message Type WE81
Create IDOC Type WE30
Assign Message Type to IDOC Type WE82
Can some one please help me? Appreciated.
,J
You can check this in the table EDIMSG.
Alternatively you can check this in WE82 as well:
WE82 --> Menu func. 'Selection' --> By Contents --> Select "By Contents" --> I/P your basic type & select "choose"
This will give you the list of the basic types associated with the message types.
Edited by: Suhas Saha on Jun 23, 2010 6:40 PM
Similar Messages
-
Idoc and message type not getting replicated in the receiver system
Hi
i have created a Z Idoc and didtributed the mode from system A ....I can see the distribution model in system B
However i cannot see the custom zidoc / message type in sys B.. Do i need to create the zidoc again in sys BHi Tarang,
at least ou need the required partner agreements and you should have a processing function for inbound IDoc. To implement this, the full definition of IDoc including Segment definition should be present in receiving system.
Just look at standard IDocs and do as they do.
Regards,
Clemens -
Idoc message type for open orders & Open JIT lines
Hi,
I need to send Open Purchase Order data and Open JIT lines data to supplier daily via Idocs.
Is there any standard messege type available for this data.
RegardsHi Rohita,
Instead of changing the standard domain, You have to make the changes in the User Exit.
Say Qualifier 001,002,003 were already there in the domain.
001--Purchase Date
002--Delivery Date
003--Ordered Date
In the user exit u have to just add the segment and the qualifier without making any changes to the Standard Domain.
These Qualifiers are just like other variables and u can add whatever values to them that u want..
You can add Qualifier 004 for Trnasportation Date or Goods issue date and have to communicate the MiddleWare informing that date with this Qualifier will be Transportation Date and they will do the mapping to the corresponding field in other syste.
You can have as many message types as u want for the same IDoc type. There is no harm in having multiple message type. And u dont need to change the standard domain. It can be done without changing the domain.
If u analyse the FM closely u will realise that they have done coding for those values in the domain.
So instead of adding it to domain u just have to do the coding for this new qualifier.
Revert back if u need any help on it.
Thanks...
Message was edited by:
Utsah Garg -
IDOC Message type for open sales orders
Hi
We are trying to send the list of open sales orders of a customer in an IDOC to the customer. For example, if the customer has got 15 sales order to be delivered to him , he needs the details of all these 15 orders in an single IDOC
Is there any message type available for this in SAP R/3 4.7 version
Regards
AnandhTry VA05 schedule lines standar variant...include status fields and both ordered qty and confirmed qty. In SAP standard system order status, status A means open orders fully (Nothing shipped, everything opened). Status B means in process orders (Partially processed - shipped). Status C means complete orders (Nothing opened). As there is no delivered qty in VA05, you need to download to excel the file and calculate the difference between both qty fields for each A and B status. That is a way to get the missing qty to be delivered or open qty as you stated.
Hope it helps.
Jorge Fernandez -
Idoc Message type for Scheduling agreement
Dear Experts,
How to configure to create Idoc for Scheduling agreement (not the releaseed schedule lines) ?
I am trying to use message type ORDERS05 but it is not working.
Will any body guide me preferably step by step process for this ?
Thanks in Advance,
Best Regards,
RajuHi Anji,
Thanks for the Reply. But i think ORDRSP is for Order Confirmations.
But I have to send Outbound Idoc for a Schedule Agreement.
Whether the same Idoc type & Messge type used for SO/PO(e.g ORDERS05, ORDERS/ORDCHG) can be used for Scheduling Agreement.
Please Advice.
Regards,
Anbalagan -
Message type for Scheduling Agreement - Outbound IDoc
Hi All,
I have to create an Idoc for Scheduling Agreement through a Z program based on some conditions. I have bit confusion, whether i can use Idoc type for Orders(e.g ORDERS01..05) & Message type ORDERS / ORDCHG to generate Outbound Idoc.
Already there is process code for for ORDCHG mappig IDOC_OUTPUT_ORDCHG & ORDERS mappig IDOC_OUTPUT_ORDERS. Whether there will be any impact on this.
Appreciate your help.
Regards,
Anbalagan.Hi Anji,
Thanks for the Reply. But i think ORDRSP is for Order Confirmations.
But I have to send Outbound Idoc for a Schedule Agreement.
Whether the same Idoc type & Messge type used for SO/PO(e.g ORDERS05, ORDERS/ORDCHG) can be used for Scheduling Agreement.
Please Advice.
Regards,
Anbalagan -
Error while trying to post inbound idoc of message type COND_A
Hi,
I am getting error while trying to post inbound idoc of message type COND_A.
If I left Usage & Condition field of segment E1KOMG then 'Table not available' idoc message is coming
and if providing value in above fields then dump is coming.
How to solve ?
Plz do reply
Thanks
MohitI do not see any reason why you would need to use COND_A04 if COND_A01 is working.
What if you could get COND_A04 to post and you would face the same result as in COND_A01?
If SAP does not check wrong values, then you have to do it yourself, or you report an incident at SAP (after you have searched for OSS notes that may have fixed this error already)
For example OSS Note 1169998 - IDoc: KONP-LIFNR values not checked
fixed a situation where the vendor number was not validated. -
Creation of New Message Type for Extended IDoc
Dear Friends,
I want to create New Message Type for MATMAS and want to Active Change Pointers accordingly. Thru this Message Type how can I able to use Extended IDoc which I have created for Basic Idoc Type MATMAS05.
I am Sending Data from SAP to XI ; Any one can help me in this How can I create the Message Type with the IDoc Extn .
for Change Pointers.
Warm Regards,
Naveen Mutyapu.Hi naveen mutyapu,
see these links
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm#_Toc8400404
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a6620507d11d18ee90000e8366fc2/frameset.htm
http://www.sappoint.com/presentation.html
http://www.allsaplinks.com/idoc_search.html
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://www.erpgenie.com/sapedi/idoc_abap.htm
http://www.allinterview.com/rss/interview-questions/new/SAP-ALE-IDocs.xml
happy learning.
thanks
karthik -
IDOC message type for "Site" in SAP Retail module?
Hi All,
We have the need to transfer master data (through master data change pointers) of Retail Sites within the SAP Retail module (transaction: WB01, WB02). Does anyone know if there's an IDOC message/type already associated with this? Thanks in advance for your help!
Cheers,
MattHi,
please read SAP notes 892103 and 551035.
The correct IDOC type should be FIDCC1 / FIDCC2.
Best regards,
Andreas -
Hello,
We currently have an inbound ALE process (message type WMMBXY and basic type WMMBID02) to post GR's against inbound delivery. If the inbound delivery item is maintained with serial numbers, we want those serial numbers to be pulled into the goods movement material document (and stored in SER03).
Currently segment E1MBXYJ is maintained with the inbound delivery number in field VLIEF_AVIS and Inbound delivery item number in field
VBELP_AVIS. In segment E1MBXYI, no purchase order is assigned and the fields EBELN and EBELP are blank. The movement indicator (KZBEW) has the value 'B'.
Even after making the above settings, the serial number(s) maintained on the Inbound delivery item do not get saved to the material document.I did look at OSS note 833603 (Solution for 2 - GR for Inbound delivery) and we have followed the same settings. This works when there is no serial number in the Inbound delivery. However if we have serial numbers, the IDOC posts successfully, however the material documents in MB03 do not have any serial numbers copied over from the Inbound delivery where the serial numbers are definitely assigned.
Any help you can provide is greatly appreciated!
Thanks,
Ashvin
P.S
If we manually create the GR via MIGO, the serial numbers are automatically applied to the GR material document. This is what we want to accomplish via the above IDoc process.Hi
Try with enhancement MWMIDO08. See note 833603 - EDI: Goods receipt for stock transport order for further information.
I hope this helps you
Regards
Eduardo -
Custom - Material Master Update using an IDOC (Message Type - MATMAS_BAPI)
Hello everyone,
I was writing a functional specs. Basically, I want to update the material master MM02 using an IDOC (MATMAS_BAPI01 - Basic Type & MATMAS_BAPI - Message Type). This is currently working.
To my understanding, this currently uses function module - BAPI_IDOC_INPUT1 to update the material master after the IDOC is posted to SAP ECC from XI system.
Now I want to add one small validation logic before it actually updates the material master (MM02).
I looked around and found one exit - EXIT_SAPLMV02_002 in enhancement MGV00001. I was almost sure that this EXIT can be used to write the custom validation code before, actual MM02 updation.
However while trying to establish a link between this EXIT and BAPI_IDOC_INPUT1, I found that EXIT_SAPLMV02_002 is actually a part of another function module - IDOC_INPUT_MATMAS01 and not BAPI_IDOC_INPUT1. I am stuck here if adding the custom logic in the exit really going to work.
a bit of googling and I found from WE30 that the purpose of both these function modules are actually different. While BAPI_IDOC_INPUT1 actually create & updates the material master (also plant specific master data which is my need), IDOC_INPUT_MATMAS01 is just for maintenence of few fields in MM02 (may be custom fields).
Can anyone point out if my thing is in right direction?
Also please offer any solution where shall I put the Custom Logic in the EXIT or the some variants of
BAPI_IDOC_INPUT1.
A less technical explanation would be appreciated as I come from a functional background and invloved in this for writing the func specs. I want to make it sure that what I write is not useless and makes some sense.
Thanks in advance,
AruneshHi Lalit,
Did some head breaking with the function module - BAPI_IDOC_INPUT1 to check whether it is calling the EXIT_SAPLMV02_002 internally. Couldn't get anywhere.
On question of another EXIT in BAPI_IDOC_INPUT1, I don't see any. I am not very proficient in ABAP code, I must say though.
I found the list of exits from google, almost same list everywhere.
http://www.sapfans.com/forums/viewtopic.php?f=21&t=296637
here I got the EXIT, I am talking about.
Any other way to find either the EXIT or link the above?
-- Arunesh -
Creation of IDOC with message type INVOIC01
Hi All,
I am trying to create a new IDOC with message type INVOIC01.
When I see transaction WE81, I observe that the required message type INVOIC is available. Also in WE82 the basic types INVOIC01, INVOIC02 and INV_ID01 are attached to the message type INVOIC.
However, while trying to create an IDOC in WE19 using a message type, I get options to create against INVOIC02 or INV_ID01. The basic type INVOIC01 is not getting populated because of which all the IDOC that I create are of basic type INVOIC02.
The client wants me to create IDOCs with basic type INVOIC01.
Can anyone please help?
Thanks in advance.
regards
NagarajanHi Nagaraj!
I've looked at the documentation and did not find information, which would help me. Should I use in my case z-segment to put extra lines or there is some qualifier in segment E1EDP02 (Document Item Reference Data), which triggers to another referencing (not PO or delivery note)?
Thank You,
Natalija -
Any having the Experiance with message type UTILMD and REQDOC in ALE Idoc
Hi experts ,
I am working with SAP ISU ,in ALE Idoc message types UTILMD and REQDOC,
ver 3.0 and 4.0 ,I got the almost all necessary details of UTILMD MESSAGE TYPE..but REQDOC is pending.If any one having the format of REQDOC segments and objectypes in SAP ISU please send it to me it will be very helpful to me .
Regards
SarathThak you for the responce,
Hai Naveen,But i dont have message type or structure for REQDOC ver 3 or 4 .in SAP .do you have that structure for REQDOC in the transaction we30 .if so please send me its mainly used for SAP ISU .
regards
sarath -
Message type, Idoc type and process code in ALE/Idoc
Each Idoc version(creams01 or cremas03) will have seperate process codes in Inbound process?
Whether Message type triggers the process code or the Idoctype/idoc triggers the process code in Inbound process?
regards
Message was edited by: henryHi Henry,
About your question as how should you assign seperate process code for the same message type ( with different IDoc Type )-
In We42, the message type can be assigned to the processing code. But here you will find that along with message type there are two more fields - Message Code & Message Function.
You can use any one these to serve your purpose.
e.g. you can assign
-process code P1 to message type M with Message code 1
-process code P2 to message type M with Message code 2
Further these process types can be configured to call separate FMs.
Now depending on IDOC types your external system should populate the message type as well as Message code so that accordingly process code will be determined at the time of inbound processing.
I hope it's clear & correct
Thanks,
Ram -
Need of message type in ALE-IDOC
Hi,
Please tell me need of message type in ALE_IDOC and its functioning.Also why it is required.Let me know its exact role.
Thanks.Hi,
Message types (required for sending the data across participating systems)relate to the structure of the data called an IDOC (Intermediate Document).Message types provide the format of the data, which can be exchanged betweenSAP and non-SAP systems. ALE supports over 200 message types in R/3.
Also check the below links
http://www.thespot4sap.com/Articles/SAP_ALE_Introduction.asp
http://www.sap-img.com/basis/types-of-idocs-use-in-ale-configuration.htm
Thank U,
Jay.... -
Purchase Order Outbound Idoc issue. Message Type ORDER
Hi Experts,
I am having issue with outbound IDoc generated from Purchase Order.(Message Type ORDER and Basic Type ORDERS05)
Issue is when i create PO idoc Segment E1EDP01 and field ACTION populates as 001 this works fine.
Now when made any changes to the purchase order.* PO trigers one more EDI - Idoc. but the ACTION field is stil as 002.*
Could any tell me how to fix this.
Cheers...Gopinath.Hi,
Thank you.
I have found the issue and fixed.
Below three setting was missing same has been done in Partner Profile now ok.
Message type u2013 ORDCHG, Processing Code u2013 ME11 and Change flag On.
Cheers..Gopinath
Edited by: Gopinath A.R on Oct 8, 2009 3:14 PM
Maybe you are looking for
-
How do I save a picture in "Preview" to the desktop?
Hello, Now that I'm using Lion, I'm having to re-learn several things and right now I'm trying to figure out how to save a picture to my desktop when I'm in "Preview". In Snow Leopard, all I had to do was go under the File menu and choose, "Save As".
-
How do i move a catalog to an new hard drive and keep all of the processed info and collections
Ive recently purchased a new external hard drive, and was wondering how to i move the files so that they retain my collections aswell as the processed info.?
-
How to go back to Tiger?
Hello everyone, I'm sick of all the Leopard bugs, I have never had so many troubles upgrading to a new OS. My airport keeps disconnecting, I can't access my NAS without doing Terminal commands, my Macbook starts slower than ever, I get a Kernel Panic
-
Best practice for handling errors in EOIO processing on AEX?
Hi, I'm looing for resources and information describing the best practice on how to handle processing errors of asynchronous integrations with Exactly-Once-In-Order QoS on an AEX (7.31) Java only installation. Most information I've found so far are d
-
Since the migration from Hotmail to Outlook, I can no longer access my Contacts (now People) using Firefox. There is no problem when using Internet Explorer. I have v21.0 Firefox, and have cleared cache and cookies. What can I do next (apart from not