Message while creating plant,Do you really want to transport number ranges?

hI
while creating plant[Copy from existing] i got the message 'Do you really want to transport number ranges?'
can some one through some light on this message
Thanks

REad carefully the info coming along with this message.
IF you transport number ranges, then you overwrite existing number ranges in your production system. you transport the e.g. the current number from your development system into production and overwrite there the current number.
As you usually produce less data in Development system than in a production system, the current number will be smaller after the transport, and SAP would then try to create data using the next number, which leads to a dump as thereis already a record in the database having this number.
so you should only transport number ranges if you do not effect existing number ranges in your production system.

Similar Messages

When I open itunes, I have the following message : a more recent version of this app already exists in your itunes library. Do you really want to replace it by the one you move ?

When I open itunes, I have the following message : a more recent version of this app already exists in your itunes library. Do you really want to replace it by the one you are moving ? How can I get rid of this message which appears for at least 20 app out of 90 ?

When I open itunes, I have the following message : a more recent version of this app already exists in your itunes library. Do you really want to replace it by the one you are moving ? How can I get rid of this message which appears for at least 20 app out of 90 ?

Unable to capture error message while creating an SO using bapi

Hi,
Can anybody suggest how to capture the error message while creating a SO using BAPI.
I have developed a customeized BAPI and using the BDC format to create the SO.
Note: i am using a call transaction method for the BDC.
I am sending the message into message1.
but i am unable to send the same into an internal table
shyam.

Hi Shyam
If my understanding is correct, you are performing BDC process within the customized BAPI...
And you want to collect the messages from BDC to an internal table and pass to the output.
Proceed as below:
1. While calling BDC, use CALL TRANSACTION .... with addition: MESSAGES INTO itab. The structure of itab should be like BDCMSGCOLL.
2. Now the messages will be collected in ita.
3. Prepare the messages using FM: FORMAT_MESSAGE
4. Collect to the returning table.
Hope this helps...
Though i could not understand the reason of creating a BDC within BAPI, you can opt for loading orders via BAPI's like: BAPI_SALESORDER_CREATEFROMDAT1 or BAPI_SALESORDER_CREATEFROMDAT2.
Kind Regards
Eswar

Warning to error message while creating a SC

Hi,
How to make a warning message to error message while creating a SC against the Cost Center when the cost center is closed in SRM 4.0.
Currently we are running on SRM 4.0 with ECC 5.0 as back end and user are able to raise a SC and POs even the cost center is closed.We want to make it as error message and stop users to create a SC /PO against those closed Cost centers.
Thanks and Appreciate your inputs.
Regards,
RK

Use the BBP_DOC_CHECK_BADI.
1. Get the backend message with a getmessage* FM.
2. Check if it's a closed cost center warning.
3. Add your own error message (can be just a copy of the message you retrieved) as an 'E' error
Because this is a backend warning, you can't influence it in SRM with the message control in SRM unfortunately.
Regards,
Robin

Error message while creating an inbound delivery to generate an idoc

hi,
i am getting the following error message while creating an inbound delivery(vl31n) where the message has to be sent ot decentralized warehouse mangament using idoc .
." No recipient could be determined for object BUS2015 method SAVEREPLICA"
Procedure for System Administration
The system attempts to determine a recipient for object BUS2015 method SAVEREPLICA using the filter object types WHSE_NO. The system cannot determine a recipient. Define a filter object type WHSE_NO with a valid filter value for recipient determination for object BUS2015 method SAVEREPLICA.
need help
regards
leo

Inbound delivery is not part of Sales and Distribution. You might want to move your post to either the Logistics Materials Management (MM) forum or the Workflow forum.
Also sometimes search for OSS notes by the message class and number helps.

For the average person what really is the point of the activity monitor app when all you really want to know is whether your mac is running at its best?

I have had my imac for nearly 18 months now,
It's okay, is the best I can say about it.
It cost me around £800+
So recently (and foolishly!) I downloaded OS Mavericks when I was actually looking for a freebie word processor programme (I got Bean because it's simple like me.)
Now the point of all this is that Mavericks has new features like a redesigned Safari (But I ain't noticed any difference yet) and Imaps (Huh!) and Ibooks and Imovie or something.
So when you are oldish like me, you really don't want people to keep changing and introducing new stuff (most of which is pointless anyway) all the time; because it takes us old ***** a while to get used to the last "improvement."
So you try and get rid of all these new apps that you don't want and didn't ask for anyway,
and then you find out you can't, because they're an integral part of the new OS.
Brilliant!
Then you find that Mail has to redo itself and this thing no longer works properly etc. and you start wishing you hadn't got up that morning...
So you try and get it all back the way it was..
And you can't.
Because you don't have an external hard drive to use the Time machine back up facility.
So you get in touch with Apple Support and it's now nearly bedtime, but at least you feel like you might be gettin' somewhere.
You talk to the supportguy and suddenly you can't remember what the problem is and what your name is, and you're thinking you might as well order in a pizza seein' as you've drunk the last of the gin..."
Anyway the guy manages to keep his temper and you get some degree of order restored but the machine still seems "jumpy" so someone says to you
"Check out the Activity Monitor! That'll tell you if something's not working right."
So you do, but it doesn't.
Just a bunch of numbers and CPU stuff and User Idiot Input etc.
All you really want is some little box to pop up and say,
"Hey! yyyou've really ssscrewed things upppp-p here, old mmmmman!!. This programme is no longer functioning properly, that thing appears to frozen, and you just wiped half your saved photos of Aunt Jessie's 94th birthday celebration (the one's where she had her eyes open)..
Press here for a full maintenance overview and repair menu.."
By this time you are on the floor, your leg's got cramp and you really really need a pee.
But there ain't no maintenance programme, just an activity monitor app you can't make any sense out of, so you yank the **** power cord out of the socket and go to bed..
So you try and

DVD-R media that is single layer has 4.3 GB formatted capacity.
DVD+R DL media has 7.8 GB formatted capacity.
DVD-R double sided has 4.3 GB on each side.
Message was edited by: a brody

Warning to Error Message while creating Shopping cart

Hi,
How to make a warning message to error message while creating a SC against the Cost Center when the cost center is closed in SRM 4.0.
Currently we are running on SRM 4.0 with ECC 5.0 as back end and user are able to raise a SC and POs even the cost center is closed.We want to make it as error message and stop users to create a SC /PO against those closed Cost centers.
Thanks and Appreciate your inputs.
Regards,
RK

Hi Richy,
The cost centre which you have maintained is locked for postings. Try to change the cost center and the warning message should be gone.
If you still want to chnage the message from warning to error,you can do in SPRO-->img->SRM->SRM Server -> Cross app basic settings->message control -> Influence message ctl.
If an entry doesnt exist for this message in SPRO,make an entry in view BBPV_PDMSG (Tranx: SM30).
See these related threads for more pointers:
Re: Error Messages in BBP_PD
Re: How to change an error message to a warning message in SRM
Re: Where can I change type of message BBP_PD 083 from warning to error
BR,
Disha.

Suppress an error message while creating a return PO ( ZRO type) (ME21n)

Hello All,
I have to write a code in order to suppress the below message while creating a return purchase order (of type ZRO) , transaction ME21n after entering the purchase organization, purchase group, the vendor & the material no :-
"You have no authorization to create without reference to another document".
For users with the below values of parameter ID & parameter value :-
parameter ID = EFB & parameter value = 02 in transaction 'SU3' , under "parameters" tab, this message is getting triggered.
My requirement is to suppress this message.
Please suggest an exit name or a BADI name wherein I can implement the code for this requirement.
Regards,
Rachana.

You can remove parameter ID EFB
and for Order type other then ZRO you can put check of doc. reference.

Deletion marked material should give error message while creating proc ord

Hello,
i had marked the material for deletion through T-code MM06 & saved.
Now when i'm creating the process order for the deleated material, System is giving only Warning message that " Material XXXX in plant XXXX has been marked for deletion."
But my requirement is system shold give an ERROR message while creating Process Order for the deleted material.

Yes Brahman is Right,
Check the followig..
Go to OMCQ and change the message category to E- Error message instead of W- Waring message in Message no M7 127, but
not M7 121.
and check it,
Regards,
Pavan idlur.

Error message while creating Document in CV01n

Hi DMS Gurus,
I am creating Inspection Methods (Doc type Q05) in Easy Doc Mgmt System. While creating, the system is throwing error message: "Update error: table DMS_AUDITS function insert return code 4" This comes as a pop-up window in SAP Mail.
Request guidance on this issue. What mistake I am doing ? Do I have to change something in Config ? Please guide me.
Regards, KrishnaM

Hi,
Looks like: there is some problem with the Number Range settings here. I wanted External, unchecked Number range as desired by my client. The settings I made in DC10 are:
Doc type: Q05 (Inspn Method)
Number assignment: 4 (External number assignment without number range check only)
External Number Range: AAAAAAA0000001 to ZZZZZZZZZZ999999999 (I created it)
I am still getting error message with a pop-up as express SAP Mail.
Did anything go wrong in this setting ?
Rgds, Krishnam

Error message while creating Appropriation Request

Hey there,
I am getting Error message while creating Appropriation Request.
I have done all the confiig according to SAP Best Practices U30 Investment Management.
When going into transaction IMA11(Create an AR) I can full in all fields but as soon as I click on the Control Tab I get a Run time error. Also when attempting to save the AR without clicking on the Control tab I get this message.
Any help would be greatly appreciated
RAISE_ exception
Runtime Errors         RAISE_EXCEPTION
Date and Time          18.07.2011 07:15:07
ShrtText
Exception condition "ERROR_IN_STATUS" raised.
What happened?
The current ABAP/4 program encountered an unexpected
     situation.
Error analysis
A RAISE statement in the program "SAPLAIA_TOOL" raised the exception
     condition "ERROR_IN_STATUS".
     Since the exception was not intercepted by a superior program
     in the hierarchy, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
     Transaction SE37 (Function Library). You can take the called
     function module from the display of active calls.
Trigger Location of Runtime Error
     Program                                 SAPLAIA_TOOL
     Include                                 LAIA_TOOLU11
     Row                                     119
     Module type                             (FUNCTION)
     Module Name                             AIA_TOOL_GET_STATUS
Source Code Extract
Line SourceCde
89 *                TYPE       = SY-MSGTY
    90 *                CL         = SY-MSGID
    91 *                NUMBER     = SY-MSGNO
    92 *                PAR1       = SY-MSGV1
    93 *                PAR2       = SY-MSGV2
    94 *                PAR3       = SY-MSGV3
    95 *                PAR4       = SY-MSGV4
    96 *           IMPORTING
    97 *                RETURN     = ls_return.
    98 *   endif.
    99 *   if not ls_return is initial.
   100 *      append ls_return to return.
   101 *      raise error_in_status.
   102 *   endif.
   103 *
   104 * Füllen der Ausgabetabellen
   105    perform fill_output_tables tables lt_status
   106                                      lt_jsto
   107                                      et_appreq_status
   108                                      et_appreqvarnt_status
   109                                      et_appreq_user_status
   110                                      et_appreqvarnt_user_status
   111                                      lt_objnr
   112                                      lt_objnr_varnt
   113                                      lt_return
   114                               using i_language
   115                                      i_with_text.
   116
   117    if not lt_return[] is initial.
   118       append lines of lt_return to return.
>>>>>       raise error_in_status.
   120    endif.
   121
   122
   123 ENDFUNCTION.

Hi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB

Error message while creating or editing a report

Hi, we acquire the Crystal reports Ver 2008 type full, and this moment we are having an error message while creating or editing a report, the message suddenly appears saying:
Crw32.exe has enconutered a problem and needs to close.
Is there a patch available or what can we do?
Thanks.

Hi Lucus,
This is to general an error, 1st try to reinstal the software, make sure you have admin rights on the PC, and try again. If you still get the error, I would call the support number, and let them help you out. You may need to know, the type of PC or server the software was installed on, the current os, available memory... etc For now, I would go to windows (If that is what you are running ) and re-install or repair the software.

General Warning Message while creating po

Hi Gurus,
Good Morning.
I want to pop-up a warning message while creating all types of PO saying that "Contact Person & Email ID text should be filled "
This message should be applicable to all PO .
How to create a message and assign in PO ?
Thanks & Regards,
Vikas

Hi Archit,
Thanks for your reply.
How to create a new Text No. & Message Text ? or if i want to use any existing text no & Message Text how can I change the Text Description ?
Thanks & Regards,
Vikas

Error Message while creating connection pool

Hi all,
I got the following error message while creating connection pool for the
SQL Server thru the Application Server Admin Console.
The message is,
An error has occured.
Operation 'create.Jdbc.ConnectionPool' failed in 'resources' Config Mbean. Target exception message :
JdbcConnectionPool Already Exists: cannot add duplicate.
But the connection pool for the SQL Server was not there in the list.
What may be the possible reason for this error.
i was trying to deploy a BMP entiy bean using the Sun Application Server.
Prior deploying i just tried to create connection pool and test the connection using the Admin Console
Please help me by providing a solution.

Kriti Sundar Mazumder wrote:
Hi
I am getting an following error message, while creating database connection pool
in weblogic 7.
"<Jun 18, 2004 4:52:36 AM CDT> <Error> <JDBC> <001060> <Cannot startup connection
pool "MyJDBCConnectionPool" java.sql.SQLException: [IBM][JDBC Driver] CLI0647E
Error allocating DB2 environment handle, rc=-1.>"
Can anyone help me out in this regard
Regards
KritiHi. I am no expert, but it sounds like a problem with the privileges the user
has... The best thing is to step back to a simpler environment. Can you try
connecting to DB2 with a simple program like utils.dbping? Please look at our
driver docs for the DB2 driver, because there are several variations in connect
properties depending on the type of DB2 you are connecting to...
Joe

ERROR Message while creating Rebate condition record T code VBO1

Dear Experts,
I am getting error message while creating rebate condition record T code-VBO1-Error Msg-862 system cannot read the structure for table,because of this i could not create condition record.
Please give the solution to create condition record.
Regards
siva

Hi,
You said you are trying to do this stuff in IDES right.
If you are using IDES provided by a company and where many people play on IDES, then you can get many such issues...
This is by our experience. Today you do something in IDES and tommorow that thing or config is screwed up by others.
If you have your own IDES, then check the suggestion given by the forum Guru's.
Regards,
SB

Message while creating plant,Do you really want to transport number ranges?

Similar Messages

Maybe you are looking for