Applying variable filter while executing a process chain
Hi,
I have a client requirement discussed below:
I have a process chain containing multiple DTPs. The user wants to have a filter variable for fiscal year period while executing the process chain(i.e fiscal period selection screen should come for him to enter fiscal period). And the entire process chain should run for that selected fiscal period.
Please help me with solutions of this dynamic process chain triggering.
Points will be assigned if helpful.
Regards,
Sourabh
Hi,
You can craete a variant with some set of value and through ABAP code you
can run the process chain according to your requirement.
Thanks,
Saveen Kumar
Similar Messages
-
Error while executing the Process chain
Hi Friends,
The process chain that I scheduled is getting failed at the Infopackage loading stage.
On checking the diplay message, I found the following log:
Cannot stage requested data for datasource
Error in source system
I activated the datasource in source system, then replicated the same and tried to load data.
But the issue remains the same.
I checked in RSA7. The status corresponding to this datasource is in yellow status.
Can I delete this entry and try again?
Please suggest.
Thanks in advance.
Surjit PHi,
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Deadlock
http://help.sap.com/saphelp_nw04s/helpdata/en/2e/44934257a5c86ae10000000a155106/frameset.htm
Dead Locks
2. Error in unit conversion
Units of measure
3.Error 1 in update
When Src file is already open or not accessible.
4.Processing no data
theres no data selected after extraction
5.Caller 70 missing
" This error normally occurs whenever BW encounters error and is not able to classify them. There could be multiple reasons for the same
1) Whenever we are loading the Master Data for the first time, it creates SIDs. If system is unable to create SIDs for the records in the Data packet, we can get this error message.
2) If the Indexes of the cube are not deleted, then it may happen that the system may give the caller 70 error.
3)Whenever we are trying to load the Transactional data which has master data as one of the Characteristics and the value does not exist in Master Data table we get this error. System can have difficultly in creating SIDs for the Master Data and also load the transactional data.
4) If ODS activation is taking place and at the same time there is another ODS activation running parallel then in that case it may happen that the system may classify the error as caller 70. As there were no processes free for that ODS Activation.
5) It also occurs whenever there is a Read/Write occurring in the Active Data Table of ODS. For example if activation is happening for an ODS and at the same time the data loading is also taking place to the same ODS, then system may classify the error as caller 70.
6) It is a system error which can be seen under
the Status tab in the Job Over View.
solution:
" If the Master Data is getting loaded for the first time then in that case we can reduce the Data Package size and load the Info Package. Processing sometimes is based on the size of Data Package. Hence we can reduce the data package size and then reload the data again. We can also try to split the data load into different data loads
If the error occurs in the cube load then we can try to delete the indexes of the cube and then reload the data again.
If we are trying to load the Transactional and Master Data together and this error occurs then we can reduce the size of the Data Package and try reloading, as system may be finding it difficult to create SIDs and load data at the same time. Or we can load the Master Data first and then load Tranactional Data
If the error is happening while ODS activation cause of no processes free, or available for processing the ODS activation, then we can define processes in the T Code RSCUSTA2.
If error is occurring due to Read/Write in ODS then we need to make changes in the schedule time of the data loading.
Once we are sure that the data has not been extracted completely, we can then go ahead and delete the red request from the manage tab in the InfoProvider. Re-trigger the InfoPackage again.
Monitor the load for successful completion, and complete the further loads if any in the Process Chain.
6.Idoc not processed completely.
Here the request remains yellow (in process) and with the same details (as seen in the details tab of the monitor) for an abnormally long time. Many-a-times, the port for communication is not open and re-starting the load helps. For long running jobs, it may not be advisable to restart the extraction
Contact the BASIS administrator to push the IDOC.
look into these links:
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
For common data load errors check this link:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Majority of the issues will be based on these things only..
Hope the following links will give u a clear idea about process chains and clear ur doubts.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Siggi's weblogs for data load error and how to restart process chain
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Hope this helps.
pls award me some points
thanks.
Thanks -
Error while designing the Process Chains
Hi All,
I have a issue on Process Chains.
In my Project there are 2 ODS.
ODS 1 : Status Header ODS (ZODS)
ODS 2 : Service Order Header. (0CRM_PROH)
In CRM, if any Service Order is created, it is available in delta Queue(RSA7) immediately.
While loading the data to ODS 2(Service Order),it is checking the data from status ODS 1(Status ODS)
For Example, I am loading the data of service Order 80001 to ODS 2(0CRM_PROH). Before loading to ODS 2, i am checking whether this service Order Number(80001) is available in ODS 1.
If the service Order 80001 is there in ODS 1, it will update the data to ODS 2.
If the service order 80001 is not there in ODS 1, it will not Update the data to ODS 2.
Problem i am facing :
1. First i am loading the data to ODS 1 (Status ODS). Early Morning 2.30AM and it completes the data load at 2.40AM. And document posting is happening on 2.37AM and ODS 1 doesnt pull the data of document posted.
2. Once the ODS 1 is completed, by 2.41AM, the data loading will happen for ODS 2 (Service Order Header).It brings all the data including the document posted on 2.37AM.
3.While loading all the data is available, and while loading to ODS 2, it is checking the status ODS. And it is checking for the document posted on 2.37AM and this document is not there in Status ODS 1 and the data(posted on 2.37AM) will not update in ODS 2.
Because of this, some records are missing in ODS 2. And while loading, we cant stop the document posting also.
How can i achieve this using the process Chain.
Design i have tried in Process Chain :
1. Start Variant.
2. Load Infopackage to PSA only for ODS 2.
3. Load Infopackage to PSA and activate ODS for ODS 1 (Status ODS)
4. Read PSA (of ODS 2) to Load data to ODS 2.
5. Activate the ODS.
I tried, but i got a error message while designing the process Chains.
No type "Activate DataStore Object Data" process can be in front of process "Read PSA and Update Data Target" variable PSA_SERVICE_ORDER in the chain
Pls suggest how to recify this according to my design.
Thanks & Regards,
Ram.Hi,
You can try this..
.......................................... Start ...................................................
Load data to PSA (ODS 2) ..................................... Load data to PSA (ODS 1)
..................................................................................Load data to ODS 1
...................................................................................Activate ODS 1
........................................... AND ..........................................................
........................................ Load data to ODS 2 .............................................
.......................................... Activate ODS 2 ...........................................
Regards,
Anup.
Edited by: Anup ShankarBS on Sep 3, 2009 4:56 PM -
Error while designing the process Chain.
Hi All,
I have created the Process Chain.
1. Start Variant.
2. Load data to PSA for ODS 1.
3. Load data to ODS 2
4. Activate the ODS 2
5. Read PSA and load data target to ODS 1.
6. Activate the ODS 1.
While checking the process Chain, i am getting the error message as
"No Type "Activate Datastore Object data" process can be in front of process "Read PSA and data target" Variable PSA_CONFIRM_ITEM in the chain.
Can u pls help on this issue.
Thanks,
Jelina.Hi,
You can try this..
..................................................... Start ...................................................
Load data to PSA for ODS 1 ..................................Load data to ODS 2
...................................................................................Activate ODS 2
.............................................. AND ..........................................................
........................ Read PSA and load data To ODS 1 .............................................
.......................................... Activate ODS 1 ............................................
Regards,
Anup.
Edited by: Anup ShankarBS on Sep 4, 2009 10:47 AM -
Error while copying a process chain.
Hi All,
I get an error message while copying the process chain in Production environment.It says "SAP System has status 'not modifiable'".Choose display object or Cancel.I hope this is because of the config. that there is no option to create anything .
Please confirm.
Regards,
Shailja.Hi Shailja,
That means that you can not change that type of object on Quality or Productive server.
Go to Administrator Workbench, sub menu Transport Connection, there you will find a button called Object Changeability (with a truck). Click on that and change the types of the concerned objects to 'Every changeable' in your case.
Beware that you must change the status not with a double click but with a right click
also refer the following thread you can find your solution
Error message after process chain transport
Hope this helps
Regards
Karthik
<3rd Reminder for points removed>
Message was edited by:
Moderator -
Error while running the process chain
Hi, I am getting following error while running the process chain.
"Lock NOT set for: Deleting the data completely from a data target"
Please suggest.
amithi,
This is due to a lock on the objects which is being used by ur load.
Even if master data used by this would be in a lock by an attribute change run. wait till that attribute change run finishes and then repeat.
If this target itself is locked by someother process like rollup , compression , this error would appear. In this case also repeat the step after those locking process finish.
some general locks during loading:
Sometimes parallel processing in DTP might lead to this, its better set the DTP and infopackage in serial processing. In this case change the settings and then repeat the process.
There is a specific case in which the Serial DTP gets locked by itself, in this case repeat it untill it succeeds.
You can identify the above scenario as below. This is applicable only if the DTPs processing mode is serial.
if u see in SM 37 this load would have three DTP processes running.
it should have only two.
In this case cancel the process and repeat it untill u get it right.
hope this helps u
regard,
ranjith
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:44 AM
Edited by: Ranjith Kumar Murugesan on Sep 12, 2008 10:46 AM -
Error while collecting the process chain in a transport request
Hi Gurus,
I am getting an error while collecting my process chain in a tranpsort request.I have to transport the request from DEV to QA system.
When in RSA1--->transport connection i drag & drop the chain from left to right side pane then the Error occurs.
1.Object 'REQUDELZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPV) of type 'Process Variants' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPT) of type 'Process Chain Starter' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
2.Object 'ZPAK_48RZW8GZX87CNEH7S897TFQSD' (RSPT) of type 'Process Chain Starter' is not available in version 'A'
Sap help given
You wanted to generate an object with the name 'REQUDEL ZPAK_48RZW8GZX87CNEH7S897TFQSD' (in transport request RSPV) of type 'Process Variants' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
From one of the threads:
(https://forums.sdn.sap.com/click.jspasearchID=10081153&messageID=4623856)
i though it was the problem of patch level sap note(966131).
Accordingly i tried collecting process chain in the request where the patch level is high(24).But same error is seen.
I have activated chain again & then tried collecting the request i the process chain.But did not solve the error.
I have to collect Process chain in a transport request.Can you help me out to solve the problem?
Thanks in advance!
Regards,
PallaviHi,
take a look:
Data Warehousing
"Errors occurred during post-handling RS_AFTER_IMPORT for MPRO L "
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
Try to set the Process Chain Start to Immediate(background jobs) in the schedule, because this will trigger the process chain once tranported and may cause similar errors.
Regards
Andreas -
Error while executing SDM process phase with action DEPLOY_SLOT
Hi,
I am upgrading CRM 2007 to CRM 7.0 and got an error in Java side.
Following is DEPLOY_SLOT_1_DON_01.LOG
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[C:\usr\sap\jupgrade\log\DEPLOY_SLOT_1__DON_01.LOG]/>
<!PATTERN[DEPLOY_SLOT_1__DON_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
May 20, 2009 4:15:48 AM Info:
May 20, 2009 4:15:48 AM Info: ============================================
May 20, 2009 4:15:48 AM Info: = Starting to execute command 'deploy' =
May 20, 2009 4:15:48 AM Info: ============================================
May 20, 2009 4:15:48 AM Info: Starting SDM - Software Deployment Manager...
May 20, 2009 4:15:49 AM Info: tc/SL/SDM/SDM/sap.com/SAP AG/7.0103.20081105085605.0000
May 20, 2009 4:15:51 AM Info: SDM operation mode successfully set to: Standalone
May 20, 2009 4:15:52 AM Info: Initializing Network Manager (50017)
May 20, 2009 4:15:52 AM Info: Checking if another SDM is running on port 50018
May 20, 2009 4:15:53 AM Info: -
Starting deployment -
May 20, 2009 4:15:53 AM Info: Error handling strategy: OnErrorSkipDepending
May 20, 2009 4:15:53 AM Info: Prerequisite error handling strategy: OnPrerequisiteErrorStop
May 20, 2009 4:15:53 AM Info: Update strategy: UpdateLowerVersions
May 20, 2009 4:15:53 AM Info: Starting deployment prerequisites:
May 20, 2009 4:15:55 AM Info: Loading selected archives...
May 20, 2009 4:15:55 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\ADSSAP03_0.SCA'
May 20, 2009 4:16:43 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIBASES16_0-10003477.SCA'
May 20, 2009 4:16:48 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIIBC16_0-10003495.SCA'
May 20, 2009 4:16:50 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIREPPLAN16_0-10002878.SCA'
May 20, 2009 4:17:00 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIWDALV16_0-10003475.SCA'
May 20, 2009 4:17:02 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIWEBAPP16_0-10003476.SCA'
May 20, 2009 4:17:13 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\BIMMR03_0.SCA'
May 20, 2009 4:17:24 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\BIUDI03_0.SCA'
May 20, 2009 4:17:31 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\BPCRMAPP02_0.SCA'
May 20, 2009 4:17:35 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\BPCRMFND02_0.SCA'
May 20, 2009 4:17:37 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CAF03_0.SCA'
May 20, 2009 4:18:02 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CAFKM03_0.SCA'
May 20, 2009 4:18:04 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CAFUM03_0.SCA'
May 20, 2009 4:18:08 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CRMAPP02_0.SCA'
May 20, 2009 4:18:09 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CRMFND02_1.SCA'
May 20, 2009 4:18:10 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\DICBS16_0-10003500.SCA'
May 20, 2009 4:18:13 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\DICMS16_0-10003499.SCA'
May 20, 2009 4:18:20 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\DIDTR16_0-10003501.SCA'
May 20, 2009 4:18:26 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\EPPSERV03_0.SCA'
May 20, 2009 4:18:43 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\EPWDC03_0.SCA'
May 20, 2009 4:18:45 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\EPBC203_0.SCA'
May 20, 2009 4:18:50 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\KMKWJIKS03_0.SCA'
May 20, 2009 4:18:51 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\KMCBC03_0.SCA'
May 20, 2009 4:18:56 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\KMCCM03_0.SCA'
May 20, 2009 4:19:03 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\KMCCOLL03_0.SCA'
May 20, 2009 4:19:10 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\LMPORTAL03_0.SCA'
May 20, 2009 4:19:12 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\LMTOOLS03_01.SCA'
May 20, 2009 4:19:43 AM Error: There is already a component of the same type with identical name 'tc/cts/appl' and vendor 'sap.com' selected.
May 20, 2009 4:19:43 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\NETPDK03_0.SCA'
May 20, 2009 4:19:45 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\RTC03_0.SCA'
May 20, 2009 4:19:48 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\RTCSTREAM03_0.SCA'
May 20, 2009 4:19:49 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SAPCRMAPP02_1.SCA'
May 20, 2009 4:20:55 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SAPCRMDIC02_0.SCA'
May 20, 2009 4:21:00 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SAPEU03_0.SCA'
May 20, 2009 4:21:39 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SAPSHRAPP02_0.SCA'
May 20, 2009 4:23:18 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SWLIFECYCL03_0.SCA'
May 20, 2009 4:23:24 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\UMEADMIN03_0.SCA'
May 20, 2009 4:23:27 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\UWLJWF03_0.SCA'
May 20, 2009 4:23:33 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCBASE03_0.SCA'
May 20, 2009 4:23:37 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCFLEX03_0.SCA'
May 20, 2009 4:23:54 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCFRAMEWORK03_0.SCA'
May 20, 2009 4:23:58 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\VCKITBI16_0-10003603.SCA'
May 20, 2009 4:23:59 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCKITGP03_0.SCA'
May 20, 2009 4:24:00 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCKITXX03_0.SCA'
May 20, 2009 4:24:02 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\WDEXTENSIONS03_0.SCA'
May 20, 2009 4:24:05 AM Error: Error while loading selected archives.
May 20, 2009 4:24:05 AM Error: Prerequisites were aborted.
May 20, 2009 4:24:13 AM Error: Error while loading selected archives.
May 20, 2009 4:24:13 AM Info: Summarizing the deployment results:
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\ADSSAP03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIBASES16_0-10003477.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIIBC16_0-10003495.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIREPPLAN16_0-10002878.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIWDALV16_0-10003475.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIWEBAPP16_0-10003476.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\BIMMR03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\BIUDI03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\BPCRMAPP02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\BPCRMFND02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CAF03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CAFKM03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CAFUM03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CRMAPP02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CRMFND02_1.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\DICBS16_0-10003500.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\DICMS16_0-10003499.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\DIDTR16_0-10003501.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\EPPSERV03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\EPWDC03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\EPBC203_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\KMKWJIKS03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\KMCBC03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\KMCCM03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\KMCCOLL03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\LMPORTAL03_0.SCA
May 20, 2009 4:24:13 AM Error: Precondition violated: C:\usr\sap\jupgrade\data\archives\LMTOOLS03_01.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\NETPDK03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\RTC03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\RTCSTREAM03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SAPCRMAPP02_1.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SAPCRMDIC02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SAPEU03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SAPSHRAPP02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SWLIFECYCL03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\UMEADMIN03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\UWLJWF03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCBASE03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCFLEX03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCFRAMEWORK03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\VCKITBI16_0-10003603.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCKITGP03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCKITXX03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\WDEXTENSIONS03_0.SCA
May 20, 2009 4:24:13 AM Error: Processing error. Return code: 4
It appears to me that somehow there is a component conflict:
May 20, 2009 4:19:12 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\LMTOOLS03_01.SCA'
May 20, 2009 4:19:43 AM Error: There is already a component of the same type with identical name 'tc/cts/appl' and vendor 'sap.com' selected.
May 20, 2009 4:19:43 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\NETPDK03_0.SCA'
Is it advisable at all to manually delete the above LMTOOLS03_01.SCA from the location and try again or this will lead to more errors?
Please help ASAP, thanks a lot,
ShivalFollowing is the trouble ticket information:
Trouble Ticket Report
Upgrade to Enhancement Package 1 SR1 for SAP NetWeaver/ SAP Business Suite 7 SR1
SID................: CD1
Hostname...........: nbg-dev-cd1
Install directory..: c:/usr/sap/CD1
Upgrade directory..: C:\usr\sap\jupgrade
Database...........: SAP DB
Operating System...: NT
JDK version........: 1.4.2_15 Sun Microsystems Inc.
SAPJup version.....: 1.5.6
Source release.....: 700
Target release.....: 700
Current usages.....: AS;EP;EPC;BP-CRM;JCRM;AAS
ABAP stack present.: true
The execution of UPGRADE/UPGRADE/DEPLOY_ONLINE ended in error.
Error while executing SDM process phase with action DEPLOY_SLOT. See C:\usr\sap\jupgrade\log\DEPLOY_SLOT_1__DON_01.LOG for details.
Cannot execute Java process for deployList with parameters C:/usr/sap/jupgrade/tmp/SLOT.DEPLOY.LST.
Return code condition success evaluated to false for process java.exe for action ACTION_DEPLOY_LIST.
More information can be found in the log file C:\usr\sap\jupgrade\log\DEPLOY_ONLINE_DON_01.LOG.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.j2ee.phases.PhaseTypeSDMProcess
com.sap.sdt.ucp.phases.PhaseException
Error while executing SDM process phase with action DEPLOY_SLOT. See C:\usr\sap\jupgrade\log\DEPLOY_SLOT_1__DON_01.LOG for details.
DEPLOY_ONLINE
UPGRADE
NetWeaver Upgrade
SAPJup
Java Upgrade -
RFC ERROR while running BI Process Chain
I'm recieving the following error while running certain Process Chains in BI.
RFC error: FAILED
RFC Message: FAILED
The system log in BI shows the following.
Communication error, CPIC return code 017, SAP return code 672
672 Logon to Netweaver failed
Other process chains work correctly via CPS.
Any Ideas?
ThanksThis looks like a BW problem. Do you get the same message when you submit it manually in SAP?
-
How to execute the process chain using function module
Hi,
How can we execute the process chain when there is any process failed. For ex. when we are running many processes. when loading fails in local process chain, after fixing this error, how can we execute the rest of processes. Can we execute the rest of processes using any function module. Kindly guide me.Hi,
Chk the weblog.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3149. [original link is broken] [original link is broken] [original link is broken]
Regards,
Balaji -
Warning Error message while scheduling the Process Chain
Dear All,
I have created the meta Chain, which contains 7 Local Chains. I have tested this chain in BI Development and Quality. It was working fine. I have moved this Meta Chain to production. While i am trying to schedule this chain, i got the warning message.
Too many parallel processes for chosen server BICI
Message no. RSPC118
Diagnosis
On the server TVSBICI you have chosen, there are only 0 batch processes available. The process chain has been designed in such as way that 3 processes must be processed parallel.
System Response
Only 0 processes can be processed parallel. Note also that to be able to start sub-chains, AT LEAST TWO free batch processes must be available. Otherwise a lock situation may arise.
For more information, see SAP Note 621400.
Procedure
Reduce the number of parallel processes in the chain or include sub- chains. This warning applies to all relevant processes.
Procedure for System Administration
Increase the number of batch processes available. You should note however that it makes no sense to set up more batch processes than there are CPUs on server BICI.
Pls help on this issue.
Thanks,
Siva.
Edited by: Siva Kumar on Jun 15, 2009 9:16 AMI have Ignored this warning and now process Chain is working fine.
Thanks,
Siva. -
How can we recognize the time taking for executing any process chain
Hi,
I have one metachain which consists of several local process chain. It was executed successfully. So how can I find out total time for executing this meta chain.Is there any way to find out that this process execution time is lile some hours and some mins.ST13 trans description is Analysis & Service Tools Launch pad and is part of the ST-A/PI plugin. See Note 69455 - Servicetools for Applications ST-A/PI (ST14, RTCCTOOL, ST12) aand talk to your Basis folks to find out if they can install it since it sounds like it is not installed at your site.
Here's a list of functions the tool provides - only some are BW specific, so if you can not get ST13 authorization, see if you can at least run the pgm
Analysis/Service Tools
Name Title
RTCCTOOL SAP Servicetools Update
ST12 Single transaction analysis
SDCCVIEWER SDCC: View data from ST-A/PI subroutines
SOS_CUSTOMER_DATA Customer Checks for Security Optimitation
BATCH_JOB_ANALYSIS Batch job analysis
CMO_SYSTEM_MONITORING CMO - System Monitoring
ITSTRACEVIEW ITS trace viewer (SAPjulep) for EBP/CRM
STAD_DATA_GET Select STAD data and put to download
BPSTOOLS BW-BPS Performance Toolset
BIIPTOOLS BI-IP Performance Toolset
BW_QUERY_ACCESSES BW: aggregate/InfoCube accesses of queries
BW_QUERY_USAGE BW: query usage statistics
BW-TOOLS BW Tools
SEM_BCS_STATISTIC_ANALYSIS SEM-BCS: Statistic Analysis
BWQUAC_CUST BW Query Alert Collector Customizing
TABLE_ANALYSIS Table Analysis Tools
UPGRADE_TOOLS Tools for Upgrade
MASS_MAN_MONITORING Monitoring for Mass Data
CUST_DMA_TAANA DVM: Settings for ST14 CA
PROJBROWSER Service Software: Local project browser
ANALYSISBROWSER Service Software: Analysis browser
SDCC_DOWNLOAD_SIMULATION SDCC download simulation for ST-A/PI collectors
TEXTBROWSER Service Software: Short&Longtext browser
SET_SDCC_PRODUCTIVE_CLIENT Manually set analysis client for SDCC datacollection
There were a few OSS Notes relating to ST03N dumping you might want to review to see if they need to be applied
Nothing is ever as easy as it ought to be. -
Error while creating a process chain
Hello BI Gurus,
I have activated the Business Content Scenario in Plant Maintenance for Infocube 0PM_C08(Measurement Results).
It provides a datasource -> infocube flow,through DSO with transfer and update rules.(3.X scenario)
I have two questions -
1.When I am trying to create a process chain for this scenario for regular delta loads(Loading from the datasource - > DSO - > infocube),
Start - >Execute InfoPackage->Activate DSO Data ->
Then when i insert the Execute Infopackage for the load step from DSO to Infocube in the process chain and check it, it is giving an error saying "InfoPackage ZPAK_D50AJ26831X6L4IIOTZTSXWAE is generated; NOT able to be used as loading variant ".
I got this infopackage by right clicking on the context menu and going to Additional Functions -> Update 3.x data to Data targets.
Why am I getting this error and how to resolve it, bcos when i load it manually it is working fine?
2.If the error is because I did not use a infopack created by me, then how to create a infopack for loading to the infocube from DSO in BI7, because when i select from the Context Menu for creating infopack, it is taking me to the already generated IP ?
Also instead of using the 3.X mechanisms, if I decide to create a DTP, will the transformation created with it automatically map all the rules in the "Update Rules" for all fields?
Waiting for your guidance.
With Warm Regards,
Vineeth
Edited by: VINEETH SUBRAMANIAN.B on Jan 31, 2009 12:11 PMHi,
Check in SDN
Problem with process chain
Re: Updating Data from ODS to IC using Process chains
Indirect Spend Analysis
Thanks
Reddy -
Syntax error when executing a process chain.
Hi gurus,
This is a weird problem that we have been facing since yesterday. In the transaction RSPC, we had created a process chain in Feb 09. It ran smoothly till yesterday. However when I try to schedule the process chain now, it gives me a dump stating Syntax error in program "CL_RSDMD_IOBJ_U_TPL===========CP ".
This same dump is generated whenever I try to display variant of one of the nodes of Process Chain.
I tried checking the corresponding programs but in vain. I have no Idea why am I receiving the error.
If anyone has faced this problem please post the same.
The following is brief overview of the dump.
Information on where terminated Termination occurred in the ABAP program
"CL_RSBK_DTP_DATABASE==========CP" - in "COPY_FROM_DB". The main program was
"RSPC_MAINTAIN ".
In the source code you have the termination point in line 166
of the (Include) program "CL_RSBK_DTP_DATABASE==========CM003".
Any help would be appreciated.
Regards,
Sree.Hi Rayapa,
There is no Long text as such, however, there is a short text which I have mentioned in my question itself.
And there is a What Happened
which is as follows
Error in the ABAP Application Program
The current ABAP program "CL_RSBK_DTP_DATABASE==========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSDMD_IOBJ_U_TPL===========CP " in include
"CL_RSDMD_IOBJ_U_TPL===========CM00E " in
line 4:
"Field "P_BOOKMODE" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. "DATA" statement."
The include has been created and last changed by:
Created by: "SAP"
Last changed by: "<My SAP user>"
Error in the ABAP Application Program
The current ABAP program "CL_RSBK_DTP_DATABASE==========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
thnkz n regards,
Sree.
Edited by: Sree Nair on Apr 3, 2009 12:10 PM -
Load fails while running a Process Chain even before loading to the PSA.
Hi Experts,
We are working on BI 7.0 and ECC 6.0 on an IS-U Project.
We are loading Transaction Data using Process Chains. Data load is failing even before loading to the PSA and the error message is as below:
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Inbound Processing
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Had anyone come across this type of error, if so, what could be the reason of failure and probable solution.
Your time is very much appreciated.
Thanks in Advance.
Best Regards,
Chandu.Hi,
It might be a network connection between the source system and BW? Can you get your Basis colleague to look into the connection?
Hope this helps.
Cheers,
Gimmo
Maybe you are looking for
-
I came home today and booted up my six day old iMac and the grey screen appeared and then a folder with a question mark appeared blinking. I got on my old macbook (which I'm using right now) and looked up so scenarios as to what to do. I was told to
-
HT2729 The audio and video are not in sync.
I have downloaded an HD video from itunes store to my computer. i have a very powerful pc computer OS: windows 7 professional, intel core i7 with 4GB of RAM. and only when i playback that specific film i downloaded from itunes; after 8 minuets +- the
-
Determining if printing is going on in paint method
By looking at the source of the existing visual components, I have found out that JComponent.paintChildren uses getFlag(IS_PRINTING) to determine wether or not the current call to paint will paint to screen or to a printer. The problem is that both g
-
X220, 6-cell vs 9-cell batt
I've been trying to find comparison pictures of the X220 with a 6-cell and 9-cell battery, without much luck. I want to see how much the 9-cell sticks out vs the 6-cell. Has anyone seen such a picture anywhere? | X220 i7-2620M | 12.5" IPS | Intel 520
-
My ipad2 won't sync with iTunes on my PC so I can back it up
I Always have synced my ipad2 with ITunes on my PC to back it up. This week when I opened ITunes on PC it would not show my device as connected so that I could back it up. Can anyone help? I just updated to 8.02 could this be a problem? Thanks