When I open itunes, I have the following message : a more recent version of this app already exists in your itunes library. Do you really want to replace it by the one you move ?

When I open itunes, I have the following message : a more recent version of this app already exists in your itunes library. Do you really want to replace it by the one you are moving ? How can I get rid of this message which appears for at least 20 app out of 90 ?

Similar Messages

When I connect my nano to my computer I receive the following message: There is a problem with this drive. Scan the drive now and fix it. My computer recognizes the ipod but the play lists saved in my itunes library are not the playlists that are on my na

When I connect my nano to my computer I receive the following message: There is a problem with this drive. Scan the drive now and fix it.
In addition, when I connect my nano, my computer does recognize but the library and playlists in my Itunes is not the same as the library/playlists on my ipod (on this ipod). If I purchase new songs from itunes, they go to the library on the computer but I cant get them to the ipod playlist.

bump, I have same issue. thanks, MM

Have FF 15.0. When I open FF I always get following message: Norton Cofidential does not support FF 1.5, as if I have 1.5. What's up?

I have FF 15.0. When I open FF I always get following message: Norton Confidential does not support FF 1.5, as if I have 1.5. How do I fix this. Do I not have a secure site?

It is most likely because Firefox 15 is in beta, so norton hasn't added full support for it yet. I'd except them to update their software in the next 3 weeks (Firefox 15 gets released in about a week and a half).

HT1926 when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR,

I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." PLEASE HELP!

I am having a problem when I plug my iPod into my macbook. When I plug the cable into my mac I get the following message - "Because a USB device was drawing too much power from your computer, your USB device has been disabled." CAN SOMEONE PLEASE HELP!

The rest of the message in the pop up window says "To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again."

I went to update my itunes and I get the following message: there is a problem with this windows installer package, a program required for this install to complete could not be run. I uninstalled the old itune and reinstalled the new one and i get the s

I went to upgrade itunes and when it finally downloaded, i got the following message: There is a problem with this windows installer. A program required for this install to complete could not be run.
I was advised to unistall the old itune, which i did and then loaded the latest itune 10.5 i think. It dowloaded fine to a point and before finishing, it came up with the same message.
Is the problem with the itune installer or my windows installer on my laptop?

Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR,

Trying to install final cut express keep getting error message "FCE" can't install on this disk. A newer version of this software already exists on this disk. Have remove all FCE elements with no success.

Keep getting error message "FCE" can't install on this disk. A newer version of this software already exists on this disk. Have remove all FCE elements with no success.

http://www.digitalrebellion.com/fcsremover/

When I'm working offline I constantly get the following message and would like to disable it please: No network connection Your browser appears to be offline. Please check your Internet connection and try again.

That's about it.

Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/

TS2220 the following message applies to my airport Utility: This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Suppor

This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
This is the message I have recieved in installing my AirPort Utility... Can anyone help me?

Old AirPort base stations and Time Capsules aren't compatible with AirPort Utility 6.2, so you have to use AirPort Utility 5.6. As you have already updated, you can't install AirPort Utility 5.6 by the normal way.
To install AirPort Utility 5.6 on your MacBook Pro, follow these steps > http://frank.is/mountain-lion-and-the-old-airport-utility/

I can't get itunes update to download and install properly. I get the following message Error7(windows error 26) what can I do

I recently tried to downlad the itunes update but it would not install properly and now I have no access to itunes and all my music. I get the following messages - Error7(windows error 26) and This applicaiton has failed to start because MSVCR80.dll was not found. Can anyone help me fix this issue. I have a Hewlett Packard Computer and Vista. Thanks

Similar issues here.
I purchased five movies for download and having nothing but problems getting them downloaded. I keep receiving error messages and the download stops and I have to restart it, just to get another minute worth of download with each restart. Now Apple has my money and I have nothing.

After updating on Windows XP, I received the following message: R6034, windows error 1114. What to do?

After updating I Tunes last version on Windows XP, I received the following message R6034, Windows error 1114. Now I can't use anymore ITunes. What to do?

Hello there, dobrevdj.
The following Knowledge Base article addresses the very issue you're describing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10. I get the message "Adobe Lightroom 1. Cannot be installed on this disk because a newer version of this software already

I am trying to install a registered copy of Photoshop Lightroom that I never installed on my Apple iMac with software version 10.10.
I get the message “Adobe Lightroom 1. Cannot be installed on this disk because a newer version of this software already exists on this disk”
If it is here – I cannot find it anywhere, and I don’t believe that I ever installed it.
I have ordered the upgrade to Lightroom 5.0 and figured that I should install Lightroom 1.0 first.
How can I solve this problem

Actually when LR 5 starts for the first time after it is installed it will have a dialog to Buy, Try or Enter a serial number. You select Enter a serial number and enter the LR 5 serial number first and then because it is an upgrade serial number it will ask for the serial number of a Previous version. You then enter the LR 1 serial number.

When i open itunes the warning itunes Library.itl appears with the following message. ..."it cannot be read because it was created by a newer version of itunes. after checking software updates we have the lastest version. What to do?

when i open itunes the warning itunes Library.itl appears with the following message. ..."it cannot be read because it was created by a newer version of itunes. after checking software updates we have the lastest version. What to do?

Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
Troubleshooting iTunes installation on Mac OS X

HT1926 When I try to open ITUNES I get the following messages: Runtime Error R6034 - "An application has made an attempt to load the C runtime library incorrectly" . I have 15,000 songs in my library. Will I lose them if I uninstall as suggested by Apple?

When I try to open ITUNES I get the following messages: Runtime Error R6034 - "An application has made an attempt to load the C runtime library incorrectly" . I have 15,000 songs in my library. Will I lose them if I uninstall as suggested by Apple??

Exactly the same problem. But it gets worse. iTunes has now disappeared from my list of installed programs so I can't uninstall anyway. Appalling problem. This update clearly didn't get proper testing before release.
In answer to your question about your song library, I seem to remember uninstalling and reinstalling iTunes a few years ago and the uninstall didn't remove the library then - I can't see why it would. Of course there have been a lot of updates since then, so it is definitely worth asking the question. Personally, I would be inclined to make a copy (if you have the space) of the iTunes folder just to be sure.
I certainly hope they get this fixed soon. I use iTunes mainly for podcasts on my iPod and I can't download anything right now.

TS1424 i have just done the latest itunes update and now have the following message come up when i try to open itunes

i have just installed the latest update and the following message has come up. Text box - Unable to locate component. Message - the application failed to start because MSVCR80.dll was not found. Re-installing the application may fix the problem.
I have tried reinstalling and it has not helped.
I have gone to uninstall what ever is installed on the computer but cannot find itunes in the program list but do not want to just delete all apple applications with out knowing what they are. So, how do i delete the existing itunes program on my compouter??
I am also hoping that i will be able to do a restor eform the cloud once i get this sorted

Hello, fletch72.
Thank you for the question. I see you have uninstalled, reinstalled and the error is persisting. Try one more time uninstalling all components of iTunes in the order specified of the article below. These steps must be processed in the order specified or the error will persist. Once this is done attempt to install iTunes again.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
If the issue persists, you will need to process the steps in the article below for each component and reinstall.
"The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H.

When I open itunes, I have the following message : a more recent version of this app already exists in your itunes library. Do you really want to replace it by the one you move ?

Similar Messages

Maybe you are looking for