Messages not removed from Inbox when deleted on iphone

My company has an exchange based mail system and they provide imap access for devices like the iphone.
I set up the iphone to connect to the server and can read messages just fine. I set the Deleted items option in the Settings app for Mail to be the Deleted Items folder on the server.
When I delete the messages on the iphone this is what happens:
1) The message disappears from the Inbox on the phone.
2) The message appears in the Trash on the phone.
3) The message appears in the Deleted Items folder on the server (as viewed from my normal work computer).
4) The message stays in the Inbox folder on the server.
So, in sum, things do what they are supposed to do on the phone. On the server, I wind up with 2 copies of the same message - one in Inbox and one in Deleted Items.
I will point out that the same behavior occurs when I try to move an item from any folder to any other from the iphone. The message winds up in both the original and the target folders....
What do I need to do to set it up so that messages are removed from the originating folder on a delete or move?
Thanks

Sounds like typical POP behavior.
Is your mail account POP or IMAP?
If POP, then your mail activities are normal, that's how POP operates.
If it's IMAP, contact your server admin, as IMAP should be reflecting all activity across all devices with that specific account on it.

Similar Messages

  • Yahoo mail not removed from inbox ios7

    I have an iPhone 4s with ios 7.0.2.  I have 2 different yahoo accounts that are showing the same issue.  If I delete or move an email from my yahoo inbox on my PC either via web or mail client, they still show in the inbox on my iPhone.  Even if I manually update the accounts (swipe down) they still are there.  I have tried waiting 10-15 minutes with the same result.  If I use the task manager to close mail and then re start it, they immediately are removed from the inbox.  Has anyone else noticed this issue?

    Check whether the same happens if Preferences > Accounts > Advanced > Remove copy from server is OFF, i.e. if messages aren’t supposed to be removed from the server at all. I’ve seen it reported in other cases that messages were removed from the server even with that setting OFF, but it ended up being a server issue that happened when using other mail clients as well — and IIRC it also was a Yahoo account...
    Try disabling the account in Mail (i.e. turn OFF Preferences > Accounts > Advanced > Enable this account), or just don’t run Mail at all, set up the account in another mail client such as Thunderbird, and see what happens.
    If you set up the account in Thunderbird, refuse to download anything when asked to do so immediately afterwards (so that you can customize the server settings first), then in the account’s Server Settings turn ON Leave messages on server if you don’t want the messages to be removed from the server as a result of downloading them with Thunderbird. If messages that you would like to have in Mail end up being removed from the server nevertheless, you may use Eudora Mailbox Cleaner to import them from Thunderbird into Mail.

  • Machines not removed from AD when reimaged - Not Installing client- how to resolve client not installing

    Hello, i have across a machine that does not have the sccm agent installed, but states on the server that it is installed. Now I am assuming that someone in the team reimaged but did not remove from AD. If this is the case, how do i resolve this? I have
    2,000 clients so need to know how widespread this is.
    i checked the client logs but there are no ccm/sccm entries. I know i could probably remove from SCCM then run a Discovery Method, but if there are more out there, i need to find a fix potentially. The client is not installed on the image. Boundarys all
    set ok.
    SCCM 2012 R2
    Cheers

    You could create a new collection with a query to find out when a clients last heartbeat was or maybe hardware inventory data age? This isn't going to completely solve the problem, but it will narrow down which clients your after. The queries I have below
    have an age value of greater than or equal to 30 days. Just increase this obviously to query for clients that haven't reported back in longer amounts of time.
    Heartbeat Query
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where AgentName in ("Heartbeat Discovery") and DATEDIFF(day,AgentTime,GetDate())>=30
    Hardware Inventory Scan Date Query
    select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where ResourceId in (select SMS_R_System.ResourceID from SMS_R_System
    inner join SMS_G_System_WORKSTATION_STATUS on SMS_G_System_WORKSTATION_STATUS.ResourceID = SMS_R_System.ResourceId where DATEDIFF(dd,SMS_G_System_WORKSTATION_STATUS.LastHardwareScan,GetDate()) > 30)
    Its also likely that clients in this situation will be marked by Config Manager as inactive. So you could also just sort by your inactive clients but this again will have a % of error as your inactive clients may be a result of workstations being off your
    network for a prolonged period of time or simply turned off.
    If you can ping a client that has a hardware inventory age of greater than 30 days but you have a client policy to run it say daily, then you could argue they fall into the category your after.
    You could also look at this outside of the Console all together. A possible option could be to use a startup / login script to check for the presence of the Config Manager client and then install it if its not (there are quite a few about). If you're not
    comfortable with this, then you could use a startup / login script to check for the presence of the client and write say a hostname or something similar to a text file.
    Cheers
    Damon

  • Deleted message not removed from iPhone Inbox

    Since updating my iPhone 3G to 4.01 I have found that when I delete messages from the inbox the messages are not completely removed from the inbox. I am left with a blank unread message. The only way I can completely delete is to turn the phone off and restart. Is anybody else having this problem? I have also found that I lose service in places I have been able to use the phone.

    theguz4l wrote:
    bump ... any response RIM?
    While VF provided a reply above, such is never expected here...refer to this information posted at the top of every page on this site:
    Also, given VFs reply above, you might want to contact your carrier for formal support.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Oracle AQ: Message not removed from source queue after propagation

    Hi.
    I have been playing around with a test setup for a "fanning out"-propagation system.
    I have created three queues, SRC_Q, DEST_Q and DEST2_Q.
    The propagation seems to work fine, the messages that I put on the SRC_Q get propagated to the destination queues. However, after propagation the message does not get removed from the source queue. Could anyone tell me why?
    I am using Oracle 10g.
    Here is my setup:
    --Test payload
    CREATE OR REPLACE TYPE test_payload AS OBJECT(
    test_id NUMBER,
    test_dt DATE);
    commit;
    DECLARE
    subscriber SYS.aq$_agent;
    BEGIN
    --- Create Originating Queue and start it
    DBMS_AQADM.create_queue_table( queue_table => 'SRC_MQT', queue_payload_type => 'Test_Payload',
    multiple_consumers => TRUE );
    DBMS_AQADM.create_queue( 'SRC_Q', 'SRC_MQT' );
    DBMS_AQADM.start_queue( queue_name => 'SRC_Q' );
    --- Create Destination Queue and start it
    DBMS_AQADM.create_queue_table( queue_table => 'Dest_MQT', queue_payload_type => 'Test_Payload',
    multiple_consumers => TRUE );
    DBMS_AQADM.create_queue( 'Dest_Q', 'Dest_MQT' );
    DBMS_AQADM.start_queue( queue_name => 'Dest_Q' );
    --- Create Destination Queue2 and start it
    DBMS_AQADM.create_queue_table( queue_table => 'Dest2_MQT', queue_payload_type => 'Test_Payload',
    multiple_consumers => TRUE );
    DBMS_AQADM.create_queue( 'Dest2_Q', 'Dest2_MQT' );
    DBMS_AQADM.start_queue( queue_name => 'Dest2_Q' );
    --- Add Subscribers and schedule propagation
    subscriber := SYS.aq$_agent( 'test_sub', 'Dest_Q', NULL );
    DBMS_AQADM.add_subscriber( queue_name => 'SRC_Q', subscriber => subscriber , queue_to_queue=> TRUE);
    subscriber := SYS.aq$_agent( 'test_sub2', 'Dest2_Q', NULL );
    DBMS_AQADM.add_subscriber( queue_name => 'SRC_Q', subscriber => subscriber , queue_to_queue=> TRUE );
    --Propagation to queues
    DBMS_AQADM.schedule_propagation( queue_name => 'SRC_Q', destination_queue => 'Dest_Q' );
    DBMS_AQADM.schedule_propagation( queue_name => 'SRC_Q', destination_queue => 'Dest2_Q' );
    commit;
    END;
    --Put something on the queue
    DECLARE
    message_handle RAW( 16 );
    MESSAGE test_payload;
    nq_opt dbms_aq.enqueue_options_t;
    nq_pro dbms_aq.message_properties_t;
    begin
    nq_opt.visibility := dbms_aq.immediate;
    nq_pro.expiration := dbms_aq.never;
    MESSAGE := test_payload( 2, SYSDATE );
    DBMS_AQ.enqueue( 'SRC_Q', nq_opt,nq_pro,MESSAGE, message_handle );
    COMMIT;
    END;
    I am really stuck with this problem so I really hope somebody have some advice on what I am doing wrong.

    I am also facing a similar issue. I have a multiconsumer queue. The message has been dequeued but the message is still present in the queue table and the message is also present in AQ$<queue_name> and the state is being shown as 'processed'.
    This all was working fine few days back and somehow stopped working all of sudden. The DB version which I am using is - 11.1.0.7.0. Any help related to this will be greatly appreciated
    -AA

  • IPad disabled.  Can't restore even after removed from FindMyPhone.  Still getting message to remove from FindMyPhone when try to restore.  Help!

    My iPad indicates that it is disabled.  When I try to backup from my PC, it tells me to disable FindMyPhone.  I removed the device from FindMyPhone (couldn't see how to turn it off in iCloud) but, when I return to iTunes, it continues to tell me to turnoff FindMyPhone.  I've verified the iPad isn't showing on FindMyPhone anymore.  What do I do to get into my iPad?  Please help!

    Hi, leahbrbus.  
    Thank you for visiting Apple Support Communities.  
    Here are the steps that I would recommend going through when experiencing this issue.  
    iOS: Forgot passcode or device disabled
    http://support.apple.com/kb/ht1212
    Cheers,
    Jason H.

  • Deleted attachments are not removed from Content Server

    We have setup Content Server to store business documents and create attachments in documents in CO. Both types are stored ok and can be opened without any problems. After deleting them though, they disappear from the Attachment List but when looking in CS, attachments created on the document still exist in CS. Stored business documents on the other hand are removed properly.
    Looking at statistics in CSADMIN shows that the deletion of the created attachment does not increment the "delete" counter.
    Any ideas on why the created attachments are not removed from CS upon deletion?
    Thanks

    We have solved this issue now. By design, the attachments are not removed directly from the content server upon deletion; Instead you will need to run report RSBCS_REORG to completely remove them from the Content Server.
    Edited by: Christian Nordvaller on Jan 26, 2010 3:53 PM

  • I have an iPad 2 and receive e-mail through internet connection. When I delete e-mails, and clear my Trash folder, they re-appear. Setting are for remove from server when moved from Inbox. Any idea what I can do to actually delete them?

    I have an iPad 2 and receive e-mail through regular internet connection. Lately, when I delete e-mails, and clear my Trash folder, they re-appear, downloaded anew from the server and marked as unread. My e-mail Advanced Settings are selected for "Remove from server when moved from Inbox." Even when I access the e-mail accountfrom my desktop and delete the e-mails, the re-appear on my iPad. Does anyone have any idea what is causing this and what I can do to actually delete them?

    Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
    When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
    Exchange 2003 server into the domain/forest. 
    You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
    So it sounds like you are not looking in the right location within ADSIEdit. 
    You may find the following article also helpful for this issue which is the same resolution:
    http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
    I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
    http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx

  • My mail program does not update when I delete emails in my other email programs (i.e. it still shows messages in my mail inbox when I've deleted them).  I think this started with Maverick?  Any solutions?

    My mail program does not update when I delete emails in my other email programs (i.e. it still shows messages in my mail inbox when I've deleted them).  I think this started with Maverick?  Any solutions?

    one is gmail, one is a university email and they are both IMAP accounts (not that I know what that means)....

  • When i want delete music in my ipad i make sync in itunes without music but the music not remove from ipad i get problim please help me my email

    when i want delete music in my ipad i make sync in itunes without music but the music not remove from ipad i get problim please help me my email

    hi i think you can used itools is very esye for add and delete eny thing that is link http://www.itools.cn/multi_lang_pc_download.htm

  • HT2480 email not deleting from server when deleted from ipad

    messages are not being deleted from server when deleted from ipad

    Hello,
    You need to tell us what the email service is. BES? BIS -- and, if so, what email provider? If BES, then see your BES admins. If BIS, then expect it to function in accordance with this KB.
    Otherwise, you can try the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB):
    1) Register HRT
    Homescreen > Options > Advanced Options > Host Routing Table > (it does not matter which line is current) > Register Now
    2) Resend Service Books
    KB02830 Send the service books for the BlackBerry Internet Service
    3) Batt Pull Reboot
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your BIS conduits for the affected email accounts.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Workitem is not removed from User Inbox

    Hi,
    There is requirement, when the PR is created by user, first it has to go his department Head and then to Manager, AGM, GM, etc. There are different departments.
    I'm maintaining organizational structure and giving positions in Release Strategy. Now how can i know who has created and to whom it has to go first. Shall i create different release strategy for that ?? Or is there any other way ??
    And i tried to create custom workflow and using two release steps instead of one. And giving Rule in my first release step. And in second release step i'm using the strategy. When i create the PR and release, it is not removing from User Inbox.
    Do anyone know what could be the problem ??

    Hi,
    From your requirement, its not a good idea to have all department heads assigned to a single position.
    But, you can have different positons for different departments and the association between department and the corresponding position number can be maintained in  ztable. Then have a custom rule based on function module which will make a call to this ztable and find the corresponding postion given the department of user, get this position out and use it as agent assignment in step. However to use above first you should be able to find the Deparment to which a given user belongs to.
    the position that you are talking about in your question, is it a position with relevance to HR structure or is it just that you have created for workflow purpose. In general its a good idea to have bit strong dependency with HR structure rather than going for workflow specific positions. If your position is a HR position then probably with bit of reengineering the HR organization structure with respect to your departments would be good and with a good design of org structure you can also get rid of any new custom table to maintain the relation between department and corresponding position.
    Good Luck !!
    Regards
    Krishna Mohan
    ooops !! many replies came in while drafting this mail itself, i guess rule using custom table already tried !!
    Edited by: Dubbaka Krishna Mohan on Jan 29, 2008 9:20 AM

  • After deleting users they are not removed from portal30.wwsec_person

    I am building a customized script to carry on users self registration.
    the script is going great and user is created and i can log into portal
    successfully with this new created user.
    I relogin as portal administrator and delete this new user and now if i tried
    to list portal users I cant see the user.
    But when I try to rerun my script to recreate this user again it fails when I
    investigated I found that it fails because the entry of this user is removed
    from portal30_sso.wwsec_person while it still exists in portal30.wwsec_person
    so the script fails as there is duplicate in primary key.
    Is this a bug in portal 309 that when the user is deleted it is not removed
    from portal30.wwsec_person

    This is actually a combination of intended behavior/design and a bug.
    Let me first explain why there is a user in both the PORTAL30_SSO schema as well as the PORTAL30 schema.
    The definition of the user, that can log in, and defines the single sign-on account, is the user's entry in the
    WWSEC_PERSON$ table in the PORTAL30_SSO schema. The SSO server actually just uses a subset of the
    columns in this table -- those defined in the WWSSO_SSO_USER view.
    The same table exists in the PORTAL30 schema, because there is a lot of common infrastructure code
    shared by both applications (Login Server, and Portal). The Security and Session Management code
    is common, and this code includes the dependency on the WWSEC_PERSON$ table.
    Now, assuming that the code was independent (for the sake of argument), why do we still have an entry
    for the user in both schemas? As I mentioned earlier, the user entry in the SSO schema is the "master".
    The SSO server can have multiple partner applications connected to it. Indeed, on my.oracle.com, the
    login server there has at least 4 portals hooked up to it, and a few other non-Portal partner applications,
    such as Oracle Mobile.
    Each partner application may have a local user profile that it uses to store application specific attributes
    of the user. This is stuff that the Login Server is not interested in, and could in no way predetermine for
    all conceivable partner applications. So, it is not unreasonable for each partner application to also have
    a user record which stores additional attributes of the user (not related to user authentication), and which
    can be used to reference other user-related data. For example in the Portal, all the user's privileges
    and group memberships are tied to the Portal's user record (foreign key constraints). So, the Portal
    being just one partner application of the Login Server, it adhere's to this model and has a user entry
    in it's schema corresponding to the user entry in the Login Server.
    When a user logs on and accesses a partner application for the first time, the partner application (read Portal)
    is expected to automatically create a local profile entry for the user on demand. The Portal does this.
    In 3.0.9 and previous versions, to delete a user, you need to delete the user in the Login Server AND the Portal.
    The only way to do this is to first delete the user in the Login Server, using the User Portlet.
    Then type the user's name into the Portal User Profile portlet (they won't be in the LOV anymore since
    you just deleted them from the login server), and click Edit, then Reset To Defaults (this means delete).
    You will then get a User Not Found error, since the page is trying to go back to show the details about this user.
    (All this has been fixed in 9.0.2 v2, by the way).

  • I got a new iphone 6.  When I restore my phone from my icloud backup my most recent photos and messages not restored from icloud backup.  How do I get the most recent backup onto my new phone?

    I got a new iphone 6.  When I restore my phone from my icloud backup my most recent photos and messages not restored from icloud backup.  How do I get the most recent backup onto my new phone?

    Hello, Anita.  
    Thank you for visiting Apple Support Communities.  
    I understand that you are wanting to restore your new iPhone 6 from an iPhone 5 backup.  This sounds like the iOS version of your old iPhone 5 may be newer than what was installed on your iPhone 6.  Try going through the steps in the article below.  
    iOS: Unable to restore from backup of a newer device
    I would also check to see the backup dates in iTunes and if the  backup is located on iCloud instead of iTunes.  
    Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes
    Cheers, 
    Jason H.  

  • Message "not downloaded from server. You need to take this account online

    After upgrading to 10.4.9, when I click on any of the old emails in my inbox I get the message "this message not downloaded from server. You need to take this account online in order to download it."
    I can still read all email in any other mailbox.
    I can read all email received after upgrading.
    I appreciate any help.
    G4 17 inch   Mac OS X (10.4.9)   1 gb ram

    You upgraded to 10.4.9 from what?
    If you upgraded from Mac OS X 10.3 or earlier, the problem is that the conversion from Mail 1.x to Mail 2.x is broken. Take a look at the following thread to better understand the problem:
    Help! "You need to take this account online in order to download it."
    More specifically, if this is a POP account, the following procedure should allow you to fix the Inbox problem. A similar procedure should allow you to fix other mailboxes that might also be affected:
    1. Quit Mail if it’s running.
    2. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to fix the problem. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
    3. Create a new folder on the Desktop and name it however you wish (e.g. Inbox Old). It doesn’t need to have an .mbox extension.
    4. In the Finder, go to ~/Library/Mail/POP-username@mailserver/INBOX.mbox/.
    5. Move the files mbox and Incoming_Mail out of INBOX.mbox, into the Inbox Old folder just created on the Desktop. These files contain all the messages that were in the mailbox before the upgrade to Tiger, and maybe even some messages that had been deleted. mbox is the most important. Incoming_Mail may or may not be present.
    6. Move any strangely-named Messages-T0x... folders to the Desktop (not into the Inbox Old folder). These folders are to be deleted after fixing the problem. They are temporary folders created during an import or an indexing process, and Mail should have deleted them when done. Their presence is a clear indication that something didn’t work as expected. If you’ve been using Mail after the conversion and have already tried to fix the problem by rebuilding the mailbox or something like that, they might contain messages that are neither in Messages proper nor in the mbox file, so keep them around until the problem is fixed.
    7. Move everything else within INBOX.mbox, except the Messages folder, to the Trash.
    The result of the above should be that INBOX.mbox contains the proper Messages folder only, and the Inbox Old folder on the Desktop contains the mbox and Incoming_Mail (if it exists) files only. Now, proceed as follows:
    8. Open Mail.
    9. The account’s Inbox should properly display in Mail as many messages as *.emlx files are in ~/Library/Mail/POP-username@mailserver/INBOX.mbox/Messages/. If that’s not the case, select the mailbox in Mail and do Mailbox > Rebuild.
    10. In Mail, do File > Import Mailboxes, choose Other as the data format, and follow the instructions to import the Inbox Old folder that’s on the Desktop.
    As a result of doing the above, some messages may be duplicated now. Andreas Amann’s Mail Scripts has a Remove Duplicates script that you may find useful.
    Do with the imported mail whatever you wish. You may move the messages anywhere you want and get rid of the imported mailboxes afterwards.
    If all is well and you don’t miss anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
    Take a look at the following article (also referenced in the thread I mentioned at the beginning of this post) to learn what you might have done before upgrading to minimize the risk of this happening, and what you may do after fixing the problem to avoid similar issues from happening in the future. DON’T do now what the article suggests, though, as that would make things worse in the current situation:
    Overstuffed mailbox is unexpectedly empty
    Ask for any clarifications or if you need further assistance.
    Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

Maybe you are looking for