Messages taking few seconds to pass through Adapter Engine

Hi All,
I am dealing with Synchronous scenarios.Sender is SOAP adapter and receiver is proxy.
When I monitor the message monitoring audit log for Adapter engine I can see in the message is taking 4-5 seconds to reach the Integration engine from the SOAP sender adapter.
This delay is in the Audit log when the message goes from the step "Trying to put the message into the call queue" to "Message successfully put into the queue".
Is there any setting by which I can eliminate this delay time in adapter.
Can somebody help me out on this?
Note : CPU Utilisation is around 7 % and there are around 700000 messages per day.
Thanks,
Zabiulla

Zabiulla,
it's a performance tunning task. Unfortunately most of the actions SAP suggested for performance tunning are aimed at async communication, for SOAP, what you can at least try is to: Instead of using the SOAP sender adapter, you can directly send a SOAP request to the entry point of the Integration Engine pipeline bypassing the Adapter Engine. As a prerequisite, the URL/query string should include the XI parameters like in the example below:
http://<server>:<port>/sap/xi/engine?type=entry&version=3.0&Sender.Service=<YourService>&Interface=<YourNamespace>%5E<YourInterface>
Try this to bypass adatper engine, this should help in your case.
Jayson

Similar Messages

Messages in multi message format can be sent to one adapter engine only

Hi All,
I am doing the scenario File to IDoc ,picking the .CSV file from the FTP server .
The problem is that the file is picking fine from FTP ,but getting an error in SXMB_MONI as : Messages in multi message format can be sent to one adapter engine only. What could be the reason and how to rectify it . Please provide me the solution ASAP.
My Source strucure :
MT_Source_File_Sender   1..1
   Record                            0..Unbounded
       Business                     1..1
       Line                              1..1
       Curency                       1..1
       Date                              1.1
etc....
My Target IDoc: ORDERS.ORDERS05
ORDERS05                        1..1
   IDOC                                0..99999
     EDI_DC40                      1..1
     E1EDK01                       1..1
Thank You.
Regards,
Bharat Kumar

Please check the blog below
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
and the following thread
CO_TXT_MMF_ENGINETYPE error in file to proxy ??

Messages come through as iMessage then text message a few seconds later?

I have been having this problem off and on ever since I got my iPhone 4s, sometimes when someone with another iPhone messages me, the message comes through as an iMessage then a few seconds later I get the exact same message, but this time it comes through as a text message. What would cause this?

Hi, just checked. here are the details. BT Text
If BT have re arranged your account it would be best to re-register in case it has been deleted from your account.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

Messages Stuck in adapter engine but passing through Integration engine

Hi All,
SOAPFault Error. Error Code/Category: XI Protocol/ Wrong Value...Received HTTP Response Code 500: Error during Parsing of SOAP Header
Above error as system error appears in adapter engine when messages are coming into SAP PI. At sender, we are having sender mail adapter.
Adapter Modules are also configured in mail adapter.What could be the possible reason.
Please suggest
Regards,
Kanisha

Below is the error log. As per scenario, Mail To File.
Please Suggest
Regards,
Kanisha

Popup message for few seconds

Hi,
      please suggest on how to display a popup window with a message for a few seconds..
     ( Ex:   message like "Scanning for records...please wait").

Hi again,
1. message in status bar for 3 seconds.
2. just copy paste
3.
Report abc.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
    percentage = 75
    text       = 'Please Wait....'.
<b>wait up to 3 seconds.</b>
regards,
amit m.

2.2.1 update and now error message every few seconds

Did the update this morning. All went fine. I have never used airplane mode. So phone was not in it.
Now all I get every few seconds on the phone, even while in sleep mode, and it wakes the screen is message:
This accessory is not made to work with iphone. Would I like to turn on Airplane mode to eliminate audio interference etc… Yes/No
If I do nothing the message goes away and the iphone goes back to sleep.
I tried selecting yes. It put phone into airplane mode. But message stills comes up. Same thing when I selected No.
This error comes up every 30 seconds or so. I have tried hard restarting the iPhone hold down Home and top button until iPhone shuts down. This didn't do anything.
Anyone else having this problem?

This is very weird. You can always restore the phone again in iTunes. If you have proper backups (pics, contacts, music, apps), after restoring, set it up as a new phone so there is no potentially corrupted backup getting on there. See if that works. If not, take it to the Apple Store and have them look at it.

Ipod only charges for a few seconds when connected through USB

Hello. Thank you for reading. I recently got a replacement ipod. No problem with putting songs back on the new one. However, whenever i plug my ipod into the usb cord on my work computer to charge my ipod, the do not disconnect will come on and the ipod will charge for about 20 seconds and then stop charging and go back to the main menu on my ipod. The only way i can get it to continue to charge is to click on update my ipod on itunes, and that ain't fun. Help smarter ipod users, you are my only hope!

Try to connect your iPod without the USB Hub
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/ipod/download/
http://www.apple.com/itunes/download/
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651

Adapter Engine Message in Delivering Status

Hi All,
Any idea how to cancel/delete the messages which are in delivering status in Adapter Engine.
In my case a single EOIO message is stuck in the AE with delivering status. Other messages are flowing successfully using the same cc.
Earlier during such cases we had to restart j2ee/ stop/start AF Messaging to resolve the problem.
Just wondering if theres any other solution?
btw : The message was in delivering status because the password mentioned in the receiver channel was wrong. There were other messages which failed but the status of those messages went into "System Error". Nothing wrong with that, but just wondering why did a single message remain in the "Delivering" status.
I have already been through this thread Re: How to delete message in "Delivering" status. Only exists in Adapter Engine and didnt find/understand anything which could help me.
Thanks
Sumit

Look at these blogs,
How to deal with stuck EOIO messages in the XI 3.0 Adapter Framework : How to deal with stuck EOIO messages in the XI 3.0 Adapter Framework
XI : How to Re-Process failed XI Messages Automatically
Message stuck in Adapter Engine queue with status "Delivering"
Hope this helps

Cancelling/Deleting messages in the adapter engine

Hi Everyone:
How can I cancel or delete a message in status 'system error' in my adapter engine.
I do not want this message will be resent by mistake when the receiver comm chanel will be active.
Thanks a lot guys.

Alvaro,
If the message is successfully processed then you cannot delete. If your message is in waiting or etc. then go through this weblog for much information:
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Hope this helps you...
---Satish

Messages got stuck in inbound adapter engine queue

Hi Experts,
My senario is File - XI -SAOP reciever and we have 8 usecases of same type. For 7 usecase, we dont have any problem. But for only one use case we have having heavy delay in processing messages.
All my messages got stuck in inbound queue of Adapter engine in to be delivered state, wait state, delivering state.
Please see the below logs and suggest some solution.
To be delivered Message log :
Time Stamp Status Description
2008-06-30 06:54:20 Success Processing child message of multi-message with message ID 8c597510-466f-11dd-92f9-000f203c93e0
2008-06-30 06:54:20 Success Using connection AFW. Trying to put the message into the receive queue.
2008-06-30 06:54:20 Success Message successfully put into the queue.
Waiting Message log :
Audit Log for Message: 4864ad2b-cabd-5891-e100-00000aa3fdb2
Time Stamp Status Description
2008-06-30 06:42:24 Success Processing child message of multi-message with message I
2008-06-30 06:42:24 Success Using connection AFW. Trying to put the message into the receive queue.
2008-06-30 06:42:24 Success Message successfully put into the queue.
2008-06-30 07:46:16 Success The message was successfully retrieved from the receive queue.
2008-06-30 07:46:16 Success The message status set to DLNG.
2008-06-30 07:46:16 Success Delivering to channel: CC_SOAP_Receiver
2008-06-30 07:46:16 Success SOAP: request message entering the adapter
2008-06-30 07:51:24 Success SOAP: call failed
2008-06-30 07:51:24 Success SOAP: sending a delivery error ack ...
2008-06-30 07:51:24 Success SOAP: sent a delivery error ack
2008-06-30 07:51:24 Error SOAP: error occured: java.net.SocketTimeoutException: Read timed out
2008-06-30 07:51:24 Error Exception caught by adapter framework: Read timed out
2008-06-30 07:51:24 Error Delivery of the message to the application using connection AFW failed, due to: Read timed out.
2008-06-30 07:51:24 Success The asynchronous message was successfully scheduled to be delivered at Mon Jun 30 07:56:24 GMT 2008.
2008-06-30 07:51:24 Success The message status set to WAIT.
Delivering Message log :
Audit Log for Message: 4864ad2d-cabd-5891-e100-00000aa3fdb2
Time Stamp Status Description
2008-06-30 06:42:24 Success Processing child message of multi-message with message ID 7481f110-466f-11dd-b8ce-000f203c93e0
2008-06-30 06:42:24 Success Using connection AFW. Trying to put the message into the receive queue.
2008-06-30 06:42:24 Success Message successfully put into the queue.
2008-06-30 07:46:24 Success The message was successfully retrieved from the receive queue.
2008-06-30 07:46:24 Success The message status set to DLNG.
2008-06-30 07:46:24 Success Delivering to channel: CC_SOAP_Receiver
2008-06-30 07:46:24 Success SOAP: request message entering the adapter
2008-06-30 07:51:24 Success SOAP: call failed
2008-06-30 07:51:24 Success SOAP: sending a delivery error ack ...
2008-06-30 07:51:24 Success SOAP: sent a delivery error ack
2008-06-30 07:51:24 Error SOAP: error occured: java.net.SocketTimeoutException: Read timed out
2008-06-30 07:51:24 Error Exception caught by adapter framework: Read timed out
2008-06-30 07:51:24 Error Delivery of the message to the application using connection AFW failed, due to: Read timed out.
2008-06-30 07:51:24 Success The asynchronous message was successfully scheduled to be delivered at Mon Jun 30 07:56:24 GMT 2008.
2008-06-30 07:51:24 Success The message status set to WAIT.
Thank you
Subbu

Dear Subramanyam,
Some message might be struck in the queue. Because of this reason furthur processing is not performed on time.
Please try to do like this:
Go to SXMB_MONI, or SXi_monitor, select QueueID in the row, which is showing green flag. In the next window belongs to queue select the queue and press unlock button on the panel.
This could possibly release the queue which is struck.
Best Regards
Praveen

Messages got stuck in Adapter engine

We are doing http to RFC sysnchronous scenario
Message got stuck in adapter engine.so we are getting 500 HTTP timeout error in Http client.
Please help us to find why messages got stuck in Adapter engine.
Below Adapter engine audit log message is pasted for your reference.
Audit Log message:
Time Stamp Status Description
26.09.2008 06:33:54 Success Message successfully received by messaging system. Profile: XI URL: http://devsap01:51000/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
26.09.2008 06:33:54 Success Using connection RFC_http://sap.com/xi/XI/System. Trying to put the message into the request queue.
26.09.2008 06:33:54 Success Message successfully put into the queue.
26.09.2008 06:33:54 Success The message was successfully retrieved from the request queue.
26.09.2008 06:33:54 Success The message status set to DLNG.
26.09.2008 06:33:54 Success Delivering to channel: RFC_out_Test
26.09.2008 06:33:54 Success MP: entering
26.09.2008 06:33:54 Success MP: processing local module localejbs/RfcAFBean
26.09.2008 06:33:54 Success RFC adapter received a synchronous message. Attempting to send sRFC for ZFTestRFC
26.09.2008 06:33:54 Success RFC adapter received a synchronous message. Attempting to send sRFC for J2EE_GUEST
ime Stamp Status Description
26.09.2008 06:56:15 Success MP: leaving
26.09.2008 06:56:15 Error Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.MessageExpiredException: Sync application request expired.. Setting message to status failed.
26.09.2008 06:56:15 Error The message status set to FAIL.
26.09.2008 06:56:15 Error Returning synchronous error message to calling application: com.sap.aii.af.ra.ms.api.MessageExpiredException: Sync application request expired..
Kindly advise us on this issue.

Hi krish,
when i send a http request it got stuck in adapter engine with status "delivering" for some time....
We found that RFC got successfully executed in R/3 system but the synchronous message is not delivered to PI.since adapter engine message is having status "delivering"
after some time we got adapter engine message status as "cancelled with error"
Error is Message expired exception which you can see audit log message I have pasted in my previous post.
Meanwhile we also got HTTP timeout error in Http client.
Could you please tell me why it got stuck in Adapter engine with status "delivering" since RFC is executed successfully.
Why we are not getting synchronous message reply back to PI?

Messages are in hold in the Adapter Engine

Hi all,
I am seeing in my adapter engine that all of the messages are in status hold , it is for a specific business system and interface.
2009-02-10 21:41:30 Success Message successfully put into the queue.
2009-02-10 21:41:31 Success The message was successfully retrieved from the receive queue.
2009-02-10 21:41:31 Success The message status set to HOLD.
can anyone please help?
Thanks in advance
Sugata B

Hi
i ve got the same problem .
I m using the message monitor in order to find the first message in error in this queue and so to be able to free the queue.
My problem is how to detect these holding messages.
As the error is in the Adapter Engine , you cant see it in sxmb_moni transaction
In the message monitoring, you can check it manually.
I need to have an automatic report of 'holding messages".
I try to connect the Adapter engine alert to the ccms. The problem is that autoreaction alert arent possible in this case.
Any body found the means to check directly in the database with sql-based command the status of message ?
thanks for your help
florent

Adapter engine messaging URL returns HTTP 403

Hi all,
I currently have a problem with the following scenario: SOAP Adapter -> XI -> JDBC Adapter. I have configured the scenario and everything seems to be running correctly (in the component monitoring the adapters and the integration engine are green). However when I send a request to the SOAP Adapter I get the following response:
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
                         <context>XIAdapter</context>
                         <code>DeliveryException</code>
                         <text><![CDATA[
com.sap.aii.af.mp.module.ModuleException
     at
Caused by: com.sap.aii.messaging.srt.BubbleException: failed to call the adapter engine [null "null"]; nested exception caused by: com.sap.aii.af.ra.ms.api.DeliveryException: Received HTTP response code 403.
</text>
</s:SystemError>
In the Message Display tool of the runtime workbench I get the following trace:
2005-06-05 11:03:08 Success SOAP: request message leaving the adapter (call)
2005-06-05 11:03:08 Success Application attempting to send an XI message synchronously using connection AFW.
2005-06-05 11:03:08 Success Trying to put the message into the call queue.
2005-06-05 11:03:08 Success The message was successfully retrieved from the call queue.
2005-06-05 11:03:08 Success The message status set to DLNG.
2005-06-05 11:03:08 Success Message successfully put into the queue.
2005-06-05 11:03:08 Error Returning synchronous error notification to calling application: Received HTTP response code 403..
2005-06-05 11:03:08 Error Transmitting the message using connection http://<host>:8000/sap/xi/engine?type=entry failed, due to: Received HTTP response code 403..
2005-06-05 11:03:08 Error The message status set to FAIL.
2005-06-05 11:03:08 Error Returning to application. Exception: Received HTTP response code 403.
So it seem that somehow the adapter framework is not allowed to send a message to the integration engine via the messaging URL.
Any ideas how to resolve this problem?
Thanks for you help,
Christian

Hi,
If you've changed the passwords for XI service users
then you may also want to check this note: 721548
XI 3.0: Changing the passwords of the XI service users
Regards,
michal

How to remove large message stuck in the adapter engine?

Hi experts,
We have a large message abt 100 MB stuck in the adapter engine which is causing the J2EE server to restart continuously.
I have tried increasing the heap sizes and the number of threads in config tool, but no luck. My question here is how to remove that message? Also I checked smq1 and smq2 both are empty.
Regards.

Hi Nagasatya,
This issue is realted to Large amount of data.You have to write condition in the query.I have face same issue,but resolved it.Please do the following steps.
Go to Configtool and selct the com.sap.aii.adapter.jdbc.svc and set this jdbc service to start manually instead of auto.
Then restart server0, this time it should be started successfully. Then go to rwb and try to
find if any jdbc hanging/failed messages are there, if so, cancel them;also deactivate the problematic jdbc communication channel, otherwise itwill poll the data again. After all above, you can manually try to start this jdbc.svc particually.
Thanks
Ravi

How to process stucked holding messages in the Adapter Engine.

Hi experts,
This question is may be familier to all...
There are thousands of messages are in holding status in the Adapter engine in RWB.
I tried to found system error in these messages. There is no system error from the last in my investigation. I tried to restart of the communication channels of the combination of these messages. But it is also not use to fix this problem.
Instead of the restart of the Java engine please let me know is there any possibility to fix this issue.
Regards
Mahesh

Hello Mahesh
You can try restarting some of the XI services (e.g. com.sap.aii.af.svc) but usually a java restart is required to free up these blocked threads/queues.
Most likely these messages are in Holding status because there is a blockage in one of the Adapter queues. This can be monitored in the RWB
-> Component Monitoring
-> Adatper Engine XIP
-> Engine Status
-> Additional Data
Find out what adapter queues are causing the blockage and increase the number of threads/queues available to it. This will help prevent the issue occuring again.
See note #791655 Documentation of the XI Messaging System Service Properties, for an explaination of the queues.
See these blogs for more details:
1) /people/kenny.scott/blog/2007/08/20/messaging-system-queue-properties-after-xi-30-sp19-xi-70sp11
2) /people/kenny.scott/blog/2008/12/05/xipi-file-and-jdbc-receiver-adapter-performance-and-availability-improvements
Ensure note #937159 XI Adapter Engine is stuck, has been applied.
Regards
Mark

Messages taking few seconds to pass through Adapter Engine

Similar Messages

Maybe you are looking for