Messaging is very slow on ios 8.2 with iPhone 4s

After upgrading my 4s to ios 8.2, messaging is very slow - it can take 30 seconds to open messaging, view list of messages or open a single message.  Sometimes messaging 'gives up' and returns me to home screen.  Anyone else experiencing this?

I've had the same problem. Reloaded it and set it up as a new phone and it was still slow if it worked at all. The store to replace the unit but they thought that might not help. They were right, and said to wait until 8.2.x came out. My latest backup is in 8.2 so going back to 8.1.x is not an option. It sad that apple release the code for the 4s with this kind of issue. I don't need a 5 or 6 because this phone 'just worked'. Now that it doesn't I'll wait it out to see if the update come out soon.

Similar Messages

  • Typing message iphone 4 is very slow in iOS 7

    typing message iphone 4 is very slow in iOS 7

    They should definitely fix the problem as soon as possible, however I don't know if this means you will not be able to use iCloud until there is a fix.  I've just toggled the preference setting it back to on and so far it seems to have fixed the problem. Will not know for sure if it's a permanent fix, but toggliing the switch might just clear a corrupted setting somewhere. Try turning it back on and see if you still get the lag.

  • Hi i cant download any games.. i have internet connection. before i was able to do it but this past few days i cant it says cannot connect to itunes store i didnt update my ipad to ios 7 because it will make my ipad very slow like whT happen to my iphone,

    hi i have ipad mini i cant download any games.. i have internet connection. before i was able to do it but this past few days i cant it says cannot connect to itunes store i didnt update my ipad to ios 7 because it will make my ipad very slow like whT happen to my iphone, is that the reason y i cant
    download games anymore?

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Reset all settings
    Settings > General > Reset > Reset all Settings.
    This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.

  • Ringer volume very slow in ios 7.04 in i phone4s

    ringer volume very slow in ios 7.04 in i phone 4s

    No such thing as a full charge from zero/flat/dead in 30min.
    Probably your battery had become un-calibrated and with the new Ios7 you are now presented with a more realistic charging time.
    From a nearly discharged phone to fuly charged will take more than one hour under normal conditions.
    -Alan

  • IPod Touch 4 is very slow on iOS 5.1

    My iPod Touch 4G is very slow on iOS 5.1. I don't want to downgrade to iOS 4XXX. Apple must do something on that. I don't think it is because of the 256MB ram. Because my iPhone 3GS have also 256MB and iOS 5.1 run very smooth and is fast. Why is iOS 5.1 on the iPod touch so terrible?

    My iPod Touch 4G is very slow on iOS 6.1.1   I want to downgrade to iOS 5.1. I was running smoothly when it was in ios 5.1 but when i updated it to iOS 6, it slowed down and i close all the apps properly.

  • HT201328 Can i upgrade my iphone 4 unlocked from ATNT and currently on iOS 5.1.1 to latest iOS 6 coming with iphone 5 without locking the phone again.

    Can i upgrade my iphone 4 unlocked from ATNT and currently on iOS 5.1.1 to latest iOS 6 coming with iphone 5 without locking the phone again.

    If it was officially unlocked by AT&T, it will remain unlocked during an upgrade of the iOS. If it was hacked to provide unlocking, it will most likely lock to the original carrier.

  • IPAD2 very slow after IOS 8 upgrade

    After IOS 8 upgrade many aplications ( Safari, Facebook, etc) load  very, very slow (comparing with 7 version) , with a significant delay of more than 10 seconds...
    Who can I solve this problem? Any workaround?
    PD
    Apple should better test the software before delivering.
    Thanks.

    Here's the list of the most annoying issues that affect me since updating my iPad 2 64GB w/Cellular iPad to IOS 8:
    EXTREMELY SLOW - When opening apps, or switching between them - We are talking just the built-in apps. Mail, Safari, Settings....
    Extremely slow Wi-Fi AND broadband. The Wi-Fi is the worst though. Horrible. Page load times are 2 to 4x slower than my wife's iPad.
    Battery life reduced by at least 25%. Used to make it all day long, now I am having to plug it in.
    Heat - It is working so hard that the processor is heating up. That can't be healthy for it, and surely the majority of the power issues stem from this.
    Copy/Paste not functioning correctly between browser windows. Oh this is frustrating. I just want to paste the URL of one website I am on to Facebook, for instance. Even though I COPY, it's pasting in info I clipped a earlier in the day to one browser tab, but if I open another one, it will paste the correct information. You never know what you are going to get.
    Cannot post a photo to facebook by hitting the camera icon when leaving a reply or making a post (using web browser version)... It starts the upload, then just stops. I *CAN* go to photos, then SHARE it to facebook, but that doesn't allow me to post a photo along with a reply.
    Multiple app crashes per day. This I can deal with. It's nothing new, it's just more frequent. Safari and Mail seem to be the major culprits. It wouldn't be so bad except it takes 2-4 seconds to reopen the crashed app. Sometimes as much as 10 seconds.
    And that's just the annoying ones....

  • Whatsapp is very slow in ios 8. Also wifi catching strenth is very slow. Palz fix it

    PLz make ios 8 better its very slow. Also my signal bar time and date bar or upside become white so i cant see anything

    Welcome to the Apple Community.
    The following article(s) may help you.
    Troubleshooting WiFi Networks
    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

  • App store is very slow after installing io6 on my iphone 4S

    email and app store are very slow after installing ios 6 on my iphone 4S

    Perhaps these suggestions will help:
    http://www.apple.com/batteries/iphone.html
    also
    http://theweek.com/article/index/250098/ios-7-battery-life-6-simple-ways-to-keep -your-iphone-powered-up
    http://www.tuaw.com/2013/09/18/how-to-stop-ios-7-from-destroying-your-iphones-ba ttery-life/
    One final unconfirmed possibility:
    http://ipadnerds.com/fix-battery-drain-issue-ios-7/
    Regards.

  • My airport is now very slow when provider replaced modem with Arris TG1672.

    TWC provided a new modem Arris TG1672 and now my wifi is very slow.  What can I do?

    The express is only 100mbit on the ethernet.. so it is relatively slow.. and generally connects ok.
    Sadly all the actual log and diagnostic info has been removed from the latest airport utility.. the older one has a bit.. But Apple programmed it not to work.
    Or if you really really and I mean really want to know what is going on, you can delve into the depths.. with a serial console port.
    http://embeddedideation.com/2014/03/dissecting-the-airport-express/
    There is a Terminal command in your Mac.
    natutil -v -i -s -m
    I have been exploring it.
    https://discussions.apple.com/thread/6259885
    It might at least show you the WAN link speed which you cannot get any other way.

  • Very slow (almost none) 3D Acceleration with current Nvidia driver

    Hi,
    I'm having a problem on my Vostro 1400 with Nvidia M8400GS graphics card. The thing is that I don't have 3D acceleration to run compiz or 3D games (Urban Terror). Well, I can run GLXgears and start up Urban Terror, but the performance in UT is very slow (unplayable) even in the main menu - the sound is laggin etc). Even if I run Xcompmgr, the performance is very bad. I have had this issue almost a year now under Arch and I haven't found any solution to this problem.
    Currently I'm running Nvidia driver from the extra repo version 169.12-4.
    I also have enabled nvidia-xconfig --composite option to my xorg.conf file.
    Here is my xorg.conf file:
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig: version 1.0 (buildmeister@builder3) Thu Feb 14 18:20:37 PST 2008
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    RgbPath "/usr/share/X11/rgb"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "dbe"
    Load "record"
    Load "extmod"
    Load "xtrap"
    Load "glx"
    Load "freetype"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "ee"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    Option "Emulate3Buttons" "true"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "nvidia"
    VendorName "nVidia Corporation"
    BoardName "GeForce 8400M GS"
    Option "NoLogo"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    If you have any idea or comment about my problem, please let me know.
    Cheers,
    Verner

    @ OP
    You might wanna try tuning your xorg setup a bit as is described on the wiki http://wiki.archlinux.org/index.php/Beg … Fxorg.conf , and just under the section on xorg there is a bit of more info on the nvidia or ati specific stuff.
    Is there a reason you are not specifying the default depth portion?
    eg:
    Section "Screen"
           Identifier "Screen0"
           Device     "Card0"
           Monitor    "Monitor0"
           DefaultDepth 24
    Or the modes portion?
    eg:
    SubSection "Display"
                   Viewport   0 0
                   Depth     24
                   Modes "1024x768" "800x600" "640x480"
    There's also more detailed info on the wiki about xorg http://wiki.archlinux.org/index.php/Xorg and nividia http://wiki.archlinux.org/index.php/NVIDIA
    Although, some of those nvidia specific options can lower your fps, I tried some of them and then removed them as they killed my opengl performance in 3d games, only "Option" I added and kept was the NoLogo one.
    Hope something there helps, always has for me
    wiki wiki wiki wiki wiki wiki wiki wiki wiki wiki mushroom mushroom
    Last edited by RabidWolf (2008-06-20 21:23:38)

  • TA22258 Very slow printer spooling canon mx420 with os 10.8, how to imrpove buffer speed?

    How to improve a very slow print spooler using canon printer mx420 with os 10.8.4
    It takes about 60+ seconds spooling hanging quite a bit at 56%.
    thanks, Gaston

    How to improve a very slow print spooler using canon printer mx420 with os 10.8.4
    It takes about 60+ seconds spooling hanging quite a bit at 56%.
    thanks, Gaston

  • Problem when updating to ios 4.1 with iphone 4

    1)i've got error ( 1004) when i was updating my iphone4, and now i couldnt do anything with my iphone 4, it stucks on the restore page there. can u please fix this problem ?
    2)well, im malaysian, is iphone 4 bumper case comes along with iphone 4 ?

    I can't send or receive text either after updated to 5.1 although I can use iMessage just fine. The problem is, one a couple of my friends updated to 5.1 while the rest haven't or having different phones. Texting is the most vital thing for communicating with my friends and family (it's hard to call because my friends and I will be in the class most of our time) and this problem really makes me so disappointed with Apple. I heard that those who use ios 5 will get the "inbox full" notice, but I don't get any notice at all. I deleted all my previous text and rebooted it several times but still not working. I even reset the network setting but no luck.

  • Iphone 4 GSM is very slow in iOS 7.0.2

    Hi, i've finaly upgradediOS 7 on my iphone.. i've reset, clean every thing i could remember, but the cell is still slow... and its was very fast before this upgrade... its possible to downgrade? how can i use this phone that is slower than every cell i've got?
    <Edited by Host>

    Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818

  • I have iphone 4.It works very slow on ios 7.I am very frustrated.

    How to speed up iOS 7: quick fixes to make older iPhones run faster.
    I have iphone 4.It has ios 7.It doesn't give good performance.Please help me.

    Hello there, Kiki Heiligenrode.
    The following iPad Troubleshooting Assistant is very helpful in providing some helpful steps to troubleshoots applications:
    Apple - Support - iPad - Applications Assistant
    http://www.apple.com/support/ipad/assistant/application/
    In step 3 ("Close App") it would probably be best to close all applications that are running.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

Maybe you are looking for

  • I am happy with the CC format- it works for me

    There are a million and one negative threads about the new CC stuff. But I wanted to start a thread with a different tone. I realize that the majority of those in the forum probably see the CC change as a negative one. And in complete honesty, I unde

  • Purchase Order text

    Hi, What is the use of maintaining Purchase order text while maintaining the material master. I had maintained some text in the material master ( Purchase order text view ) in MM01 But while creation of PO, i am unable to  see the text getting copied

  • Error in gridcontrol 10.2.0.5 with Beacons and oracle_csa_collector

    We set up an enterprise manager image 10.2.0.5 to monitor siebel 8.0 with the siebel performance management pack. Alle SI moduls are working fine over with the pack. We still get errors with all HI like Callcenter modul. If we are trying to execute t

  • TIMER in FORMS 6i in order to show the contents of v$ view....

    Hi, I am looking for a solution that would continously show the contents of v$SQLArea on forms 6i. Should I use timer in forms 6i in order to get the desired results. COULD someone please send me the little example of my query? how should I do that?

  • USB - max size @ performance ??

    Hi, Recently, i figured out that an External HDD (above 10gb) cannot be detected from SunRay device. Even though using the latest sunray (Sunray 4 10/08) & latest script usbdrived, but there's still facing a problem on the usb. What is exactly the ma